Related
Hello,
I'm trying to use an app from the playstore called "vipps".
It's from a bank in norway called DNB, and it let's you transfer money near instantly from one to another.
This app refuses to run on my phone because it's rooted and have a custom rom etc.
I'm running Xtrestolite Deodexed with the included alliance firmware.
I have read somewhere about Rootcloak Plus with Cydia (no idea what this really is, but i understood cydia is like app store for iOS jailbreaked phones?)
I'm wondering if this exsists on 5.0.2 lollipop (and how to get it / install it if it does), or if there is any other known way of bypassing this applications refusal to run on my device.
I'm on a SM-G920F (international version) if that helps.
Any tips / questions / help regarding this is most welcome and much appreciated!
- Renolz
Try searching for a Xposed Module that does this
I remember there was one for kitkat but i dont know whether or not its currently available for lollipop
itsbighead said:
Try searching for a Xposed Module that does this
I remember there was one for kitkat but i dont know whether or not its currently available for lollipop
Click to expand...
Click to collapse
I tried to get xposed, but it's not yet compatible with the S6 as far as i know.
Something about SDK version 21 and arm 64 (no idea what this is, but that was the error when trying to install it)
renolz said:
I tried to get xposed, but it's not yet compatible with the S6 as far as i know.
Something about SDK version 21 and arm 64 (no idea what this is, but that was the error when trying to install it)
Click to expand...
Click to collapse
Cydia is for ios based devices and if s6 had xposed that module called root cloak will work for what you need it for. but since theres no xposed. You cant run it.
I second that!
I have the exact same problem! Please let me know if you find a way to bypass the app restrictions!
Same here:
Cyanogen OS 12.0, android 5.0.2, OnePlus One
Tried RootCloak plus app, add no.dnb.vipps app but still does not open.
I have the same issue with a Huawei running 4.4.4 Vipps by DNB does not work.. Xposed says that there is a known issue with the room installed. I deactivated the Resource hoocks, but it did not solve the issue.. BALLS!!
Mr.P
parrafin23 said:
I have the same issue with a Huawei running 4.4.4 Vipps by DNB does not work.. Xposed says that there is a known issue with the room installed. I deactivated the Resource hoocks, but it did not solve the issue.. BALLS!!
Mr.P
Click to expand...
Click to collapse
Hi,
I was able to fix the Vipps issue by using Rootcloak version 1.4 (not the newest one), and adding no.dnb.vipps to the list.
Works like a charm on SGS6
Hope this helps!
OPO CyanogenOS 12.1.1 Android 5.1.1 rootcloak vipps
I have a oneplus one With CyanogenOS 12.1.1-YOG7DAS2K1 and android version 5.1.1. The phone is rooted and I have twrp installed.
I used twrp to install Xposed framework 85 trough the link provided in this post: http://forum.xda-developers.com/showthread.php?t=3034811
Within the xposed installer app I downloaded the module RootCloak version 2.1.0
In rootCloak I added no.dnb.vipps (add/remove apps -> three dots -> add custom app -> write "no.dnb.vipps")
Now I can run vipps without any problems.
Vipps on OPO running cm14.1
Sorry to bring up an old thread.
I've been using this Norwegian bank app on cm12/cm13 with rootcloak for a while now without any trouble. Lately the app just crashed on login when using rootcloak so i decided to flash cm14.1 nightly and see if systemless root and magisk would do the trick instead. I flashed cm14.1, fully unrooted the phone, flashed magisk and phhs systemless root. I downloaded SafetyNet playground, and my phone passes all SafetyNet checks. I also downloaded pokémon GO to verify, and that works flawlessly. Vipps however, does not work... The app does not crash anymore, but i get the message "vipps doesn't support rooted devices".
It seems to me like the app detects that i'm running cyanogenmod. When my oneplus one was new, the app wouldn't work even though i had a locked bootloader and no root. I actually had to unlock bootloader, root, flash xposed and install rootcloak to get it working.
Is there any workaround for this problem? It seems to me that rootcloak did something more than just hide the root from the app. Is this correct? I can upload the .apk file for Vipps if that would be of any help. The app force closes before login with the message "Vipps doesn't support rooted devices", so i dont think region will be a problem.
I too am curious of this.
Is there a way to "fool" an app from checking if there is a custom ROM or original ROM?
I assume the app only checks ROM info, and perhaps that can be easily edited?
Magish Hide, checkmark:
com.android.phone
no.dnb.vipps
not sure if these are needed as well
com.slash.batterychargelimit
com.grarak.kerneladiutor
com.dp.logcatapp
ok so i have viper rom and its running android 9 i want to note that every time i have tried this on ANY rom on ANY phone and it dose not work i have tried it on AICP and lineage OS all while on android 9. So i have magisk and i have riru core and riru devhook or whatever its called yafha or sandhook and of course i have dvdandroid version of xposed installer installed most if not all my exposed modules run great BUT device id changer lite (which is the newest version) never wants to work. My phone usually boot loops or dose not turn on once i run it and have to use mm from recovery to disable riru so it dose not load xposed so i can disable the device id changer lite module (witch is fine btw). Is there any other app or maybe magisk module that i can use to fake my device information?. I just like to be secure as possible and I may even be paranoid lol.
NOTE: If you are here to harass me about my spelling, punctuation, and or you are here to point out flaws and mistakes I may have made or call me names please leave im simply asking for help that is all. :good:
My daughter got a new phone, after struggling with bootloops and magisk issues. Finally got everything working correctly.
But,
I got root to go fine, only thing is she has had location issues. Google maps, other GPS or location services did not work.
So I uninstalled xprivacylua and seems like services came back, looks like I wasn't hiding anything on it anyways. Or I don't remember what it was.
So instead of reinstalling xprivacylua I decided to look for different answers .
Maybe some other solutions.
Here is a list of apps and modules that are installed. I think some of them overlapped and are kind of messed up. To many that my head is spinning.
Magisk
23.0 (23000)
Magiskhide Props Config.
Riru
Riru LS exposed (Tried switching back and forth to edxposed)
Systemless Hosts
Universal Safetynet fix 1.1.2. (Tried different versions)
LS Esposed one module,
Hiddencore module (enabled Google services Framework and google play services)
Also cleared Data and Cache on google play store.
Rebooted every time
Always safety net failure.
I know its a lot to take in , and do appreciate any feedback or help on this issue.
Is it an 8T? Are you running stock OOS with magisk?
In that case all you need to pass safteynet should be Magisk 23 with magisk hide activated. No need to bother with Magisk hide propconfig, or edexposed or anything.
If you are running a custom rom it is a different matter
I have magisk 23 and magisk hide is active on all google play services, but it still fails.
Its 8t with stock rom.
I think this is why its a little confusing since on my stock 7 pro I have google play services and only android.gms, and android gms unstable hidden and it works fine.
There is not a custom recovery on either of these phones.
Magisk and magisk hide works fine for me, so don't know what to say.
Perhaps try to uninstall Riru and exposed to make sure that they aren't triggering safety net?
You have to get termux. Get su superuser permissions then type props a menu will load press 2 then select yes to change device name then y again to reboot then it should pass safety net
Screens of magisk hide props config
scottlam1 said:
You have to get termux. Get su superuser permissions then type props a menu will load press 2 then select yes to change device name then y again to reboot then it should pass safety net
Click to expand...
Click to collapse
Nope.. Terminal Emulator is actually recommended. With Termux, you are required to use root access for props to work.
with Terminal Emulator, you can just type:
props
and then it'll load. no "su" necessary. That's termux. I've had some issues that these people are talking about with my OnePlus 8T (KB2005, unlocked completely).. I'll try Termux just to rule this out, but this is highly doubtful as to whether or not safetynet passes based on this--it's attempting to modify the same values. Anyway, when I unlocked that bootloader on a stock rom, CTS Profile started showing as false. So I did get the stock on there correctly and it initially passed with a LOCKED bootloader. There's an alpha TWRP that you can actually flash if you want. There's a couple others where you can only boot it.. there's a lot of "only's" here.. and I couldn't get it going with any of the apps mentioned, including ditching EdXposed and deciding to try LSPosed, but that + XPrivacyLau didnt seem to help me. Maybe I'm doing something wrong. From what I can tell I've done everything right and I've got quite a bit of experience attempting/doing this. Sometimes Device SImulation and forced BASIC ATTESTATION can be a lifesaver.
On my OnePlus 6T, I don't have this problem.. then again it's on Android 10. I can't even get a proper root explorer for Android 11. I seriously can't stand what they did to Android 11.. it's so ridiculous how many apps are now incompatible. Root Explorer Pro was possibly the best Root File Manager I've ever used and I've used it since day 1.
Anyway, I'm gonna give all of this a shot in different order.. and this time I'll see if Magisk can do the trick (last time it was on some different firmware and i just now was able to get it going by flashing via Fastboot in Linux). It's the manual way (payload dumper) as opposed to MSMDownloadTool -- which could be used via a VM.. and maybe even better than using Windows tools where you literally have no idea what you're actually doing. I'm just saying. Android is a linux distro, technically.. and we're trying to use just basic root apps for Android 11, and they don't seem to work.. it's insane. They did something with the partitions and it's apparently having issues even mounting R/W even with Magisk giving it root permissions. Btw, Magisk Canary is now outdated, as far as I can tell? Or it's just nowhere to be found when it comes to versions. Either way, I have tried multiple. So I'll try again in a different order.
Sorry for the long post. I've just had it. I've been working on this for a WEEK non stop.. 5-6 days and this is the first sign of progress (reverting via fastboot via Linux, which is the same thing as the MSMDownloadTool ultimately... without the hassle of finding it)
Let me know if there's anything else.. cause I've tried just about everything out there. Remember, for me, so far... unlocked bootloader = CTS Profile failure.. but locked bootloader + stock rom? Passed. I don't know. Before it wasn't passing with a stock rom that came with it so that drove me nuts and made no sense, hence me saying "progress" ... heh. Anyway.. Please let me know if you guys do find anything that works for it. I'm at my wits end. There's basically almost zero support for the 8T but plenty for the 8 and 8 Pro. So that also gets on my nerves. Sorry, once again, for this really long post. Some of it is just venting and I'll update if I get somewhere with it.
.. and now this morning after installing magisk, by just booting twrp (not flashing, but booting) and then using LSPosed/XPrivacyLua (I installed MagiskProps too but I barely did anything aside from pick a fingerprint) --- and it passed? WHAT?
I'm gonna look into this, but I'm not complaining. Let's see if I can find good Android 11 apps for actually browsing the system and being able to r/w any elusive partitions -- wasn't working well with Android 11 before. Not sure if that's around with a simple design anymore. Root Explorer Pro was king of that. Then Android 11 stepped in. I still have to install Lucky Patcher, if it will even work as a module for LSPosed. (Yes, I'm one of those idiots) -- I fully expect it to fail with that but I might be pleasantly surprised. Who knows. So, we'll just call this mixed results. For now -- Passing somehow. I don't understand aside from LSPosed and XPrivLua.. maybe magiskprops. Not sure which one did what first to cause this to go the right direction.
All I can say is all I have is magisk props not the other 2 modules you speak of
Well this is super weird. I didnt see my daughter for 2 days and she said everything is working fine.
I did tons of reboots and other installs/uninstalls and nothing worked.
But now I do safety net check and it works fine.
I dont get it.
If I do have issues again I will post here and follow instructions.
Thank you for your time and help
eracet said:
Well this is super weird. I didnt see my daughter for 2 days and she said everything is working fine.
I did tons of reboots and other installs/uninstalls and nothing worked.
But now I do safety net check and it works fine.
I dont get it.
If I do have issues again I will post here and follow instructions.
Thank you for your time and help
Click to expand...
Click to collapse
Ok asked her what she did. Mentioned updated YouTube vanced. And not sure of anything else.
As the title suggest, I'm trying to bypass a root check for an app, more specifically MyMazda App. I have tried several different methods ( repacking Magisk, Root Cloak, LSposed/Xpirvacy, Unviersal SafteyFix Patch ). None seem to work, my bank, credit and stock exchange apps work completely fine along with every other app except this one. I'm running on a complete stock ROM.
I am running:
Oneplus 8 Pro
Android 11
OxygenOS 11.0.10.10.IN11AA
Magisk v24.1
This raised a few questions:
1. Is it even possible to bypass this apps root check?
2. If it is and when I do bypass it, will all the features work (ie. Remote Start/Stop, Remote Lock/Unlock, etc.)?
3. If there is no way, will downgrading Magisk to when MagiskHide was in the app?
4. And if I do need to downgrade, is there aspecific procedure for the Op8 Pro or is just like any other phone?
Sidenote: I am very new to this, I only just rooted my phone 2 days ago, without any issues thankfully, so I may have missed something important to one of the modules for it to work. Thank you in advanced!
Checking whether Android is rooted or not basically requires only 1 line of program code.
xXx yYy said:
Checking whether Android is rooted or not basically requires only 1 line of program code.
Click to expand...
Click to collapse
Interesting, then how come this app is causing so much issues compared to my banking apps and such?
This is a tutorial on how to set up your phone so that you can consistently pass SafetyNet. Note that all this is from my own experience, and if what works on one device blows up another, that's not my problem and I'm not responsible for that. I will attempt to keep this tutorial as clean and simple as possible, but if you have any further questions that are more specific you are welcome to ask.
In order to be as simple as possible to understand, this guide assumes the following:
- You have a PC. Windows, Mac, the almighty Linux, it makes no difference.
- You have the android platform tools on your PC
- Your device has an unlocked bootloader.
- Your device does not have support for signature spoofing.
- Your device does not have Google's official play services on it.
- You have a working brain.
If one or more of the above is incorrect, you'll have to make more use of the last item on the list.
If the last item on the list is incorrect, you're beyond hope.
Now, the guide:
Step 1: Get some magisk on your phone
Setting up magisk is incredibly simple, and I won't be going into detail here. I would recommend installing the regular magisk app and patching your boot image, as that is what I've done.
Note that you do not need the magisk manager app for this guide at all.
I've attached the magisk app I used to this post. You'll need to install the app and make use of the "install" section of the home page.
Once magisk is installed and set up, you'll need to enable zygisk in the magisk settings. Then reboot.
Step 2: Installing MicroG
I am not going to list through all the possible way you can install microG. Instead, have a link to microG's wiki:
index - MicroG
r/MicroG: Subreddit about microG, a free-as-in-freedom re-implementation of Google’s proprietary Android user space apps and libraries. This …
www.reddit.com
Now here comes the important bit:
From everything I have seen, it appears clear that google stores information about each device that registers with it, and that this in turn will affect SafetyNet.
Therefore, the best way to prevent this leading to SafetyNet failing is to prevent connection with google completely - till the phone is ready.
Before you install microG, make sure your phone has both wifi and data turned off. Leave these off till the setup is complete. Note that only the phone needs to be disconnected, nothing else matters.
In essence, this means that google sees nothing till your device is setup correctly, and then SafetyNet has nothing to complain about.
Now that you've read every word of the above paragraph, go ahead and install microG on your phone.
Make sure you've got all the different components: Core, GSF Framework, FakeStore, and DroidGuard helper. If your installation method does not handle all of this for you, then it sucks, and you shouldn't have used it. Regardless, you can find apks for all of these at https://microg.org/
Step 3: Don't touch
As I've already made clear above, do not change any microG settings at this point. Don't enable device registration (if it's disabled), don't enable safetynet, and just generally leave microG settings alone for now. Oh yeah, and don't turn on wifi or data.
Step 4: Tricking SafetyNet
Everything up till now has just been preparation for actually tricking SafetyNet. So now that we've got all that out the way, let's get down to details:
First, downloads:
Download the latest zip: https://themagisk.com/magiskhide-props-config/
Download the latest zygisk zip: https://themagisk.com/universal-safetynet-fix/
Move these over to your phone and install them both as magisk modules.
Once these modules are installed and you've rebooted, connect your phone to your pc.
Open a terminal/command prompt in your platform tools folder, and type "adb shell props". You may need to grant the superuser permission from your phone.
Then choose option 1.
You'll then need to choose a device from the list available.
The key here is that we need to spoof our device fingerprint, so google thinks the device is certified, even if it actually isn't.
If your device is approved by google, then simply select your device model.
If not, things get a bit more unclear. Not every fingerprint will work for every device - If your device is vastly different from the one you are trying to spoof things may not always work correctly. The best advice I can give here is to choose a device that matches yours as closely as possible. As an example: if your device is made by Xiaomi but is not approved by google, I would select a fingerprint belonging to a Xiaomi device.
Keep in mind that if you try a fingerprint that does not work, you cannot simply switch it to something else and try again, as the SafetyNet history for the device has to be clean.
Once you've spoofed your device fingerprint and rebooted, you're almost ready to test out SafetyNet and google sign in. But first:
Step 5: Do you need signature spoofing?
To ensure things work as smoothly as possible, it's important to make sure you have signature spoofing working before you test SafetyNet. If you've got your own solution to that great. If not:
The first thing I have to point out is that a lot of sigspoof methods on google nowadays are outdated and semi-functional at best, working for a handful of devices. As this guide is intended to be a universal solution regardless of your device, the only answer is lsposed and fakegapps.
Download the latest zygisk zip: https://themagisk.com/lsposed/
Transfer it to your phone and install it as a magisk module.
I've attached the full lsposed manager apk to this post, as the parasitic one sucks. Install it and the fakegapps apk which I've also attached to this post.
You'll now need to enable fakegapps, and turn it on for anything that might need access to spoofing. This includes the system framework, all the microG stuff, and any app that needs to be fooled by microg. Then reboot.
Step 6: Ready to test
Everything should now be set up correctly.
Check the microG settings to make sure signatures are correctly being spoofed.
Enable device registration (if disabled).
Enable SafetyNet attestation.
At this point your phone should still be completely disconnected from the internet.
If you're happy everything is set up correctly, turn on your wifi or data, and test SafetyNet attestation.
Step 7: Done.
Hopefully you now have working SafetyNet and google sign in. If this does work for you, it means that safetynet is now stable on your device, and you are free to install whatever you want on it.
If it didn't work, keep in mind that this hasn't been tested on every device in existence. All I know is that this consistently works for me.
If your phone doesn't turn on, you probably need to charge it.
If your phone has exploded, you probably have a Samsung.
Thanks everyone for reading my guide, I hope you enjoyed! (Maybe it even worked)
RESERVED FOR STUFF
Your guide is well made but I have some things I would change.
1) Since everything has to be done offline and adb is used in linux installation at least I would recommend adding an tip with adb push ~/Downloads/safetynet-tools.zip /storage/emulated/0/Downloads.
Furthermore cause of it I recommend attaching a single zip with
tools so they can be moved easily to the device.
2) there is missing Information: you said in the guide that safety net trips extremely easily. During the entire process the device cant be connected to the internet but what if you want to install another app. For example what if you want to install another app later lets say Netflix for example. I know for a fact it requires safetynet. It would be configured automatically will it? This would conclude to permanetley lock safety net till its reinstalled.
hypethetime said:
Your guide is well made but I have some things I would change.
1) Since everything has to be done offline and adb is used in linux installation at least I would recommend adding an tip with adb push ~/Downloads/safetynet-tools.zip /storage/emulated/0/Downloads.
Furthermore cause of it I recommend attaching a single zip with
tools so they can be moved easily to the device.
Click to expand...
Click to collapse
Hi, I think you may have misunderstood slightly. Only the phone has to be offline, you can still connect it to a PC and download the files on the PC. The only important thing is that the device doesn't communicate with google till you are ready for it to.
hypethetime said:
2) there is missing Information: you said in the guide that safety net trips extremely easily. During the entire process the device cant be connected to the internet but what if you want to install another app. For example what if you want to install another app later lets say Netflix for example. I know for a fact it requires safetynet. It would be configured automatically will it? This would conclude to permanetley lock safety net till its reinstalled.
Click to expand...
Click to collapse
Once the process is complete, you can install whatever else you want and safetynet will not stop working. The main thing is that the process of setting up the device so that it can be approved is very easy to mess up, so that part has to be done carefully.
I'll edit the guide to make these points more clear.
Sense_101 said:
Hi, I think you may have misunderstood slightly. Only the phone has to be offline, you can still connect it to a PC and download the files on the PC. The only important thing is that the device doesn't communicate with google till you are ready for it to.
Click to expand...
Click to collapse
I knew you always were able to use pc and you miss understood me. I at least often had the problem with transferring files for some reseason and for this adb push is extremey helpful.
Regarding instaling more apps thank you for the answer and how quickly it came.
Sense_101 said:
This is a tutorial on how to set up your phone so that you can consistently pass SafetyNet. Note that all this is from my own experience, and if what works on one device blows up another, that's not my problem and I'm not responsible for that. I will attempt to keep this tutorial as clean and simple as possible, but if you have any further questions that are more specific you are welcome to ask.
In order to be as simple as possible to understand, this guide assumes the following:
- You have a PC. Windows, Mac, the almighty Linux, it makes no difference.
- You have the android platform tools on your PC
- Your device has an unlocked bootloader.
- Your device does not have support for signature spoofing.
- Your device does not have Google's official play services on it.
- You have a working brain.
If one or more of the above is incorrect, you'll have to make more use of the last item on the list.
If the last item on the list is incorrect, you're beyond hope.
Now, the guide:
Step 1: Get some magisk on your phone
Setting up magisk is incredibly simple, and I won't be going into detail here. I would recommend installing the regular magisk app and patching your boot image, as that is what I've done.
Note that you do not need the magisk manager app for this guide at all.
I've attached the magisk app I used to this post. You'll need to install the app and make use of the "install" section of the home page.
Once magisk is installed and set up, you'll need to enable zygisk in the magisk settings. Then reboot.
Step 2: Installing MicroG
I am not going to list through all the possible way you can install microG. Instead, have a link to microG's wiki:
index - MicroG
r/MicroG: Subreddit about microG, a free-as-in-freedom re-implementation of Google’s proprietary Android user space apps and libraries. This …
www.reddit.com
Now here comes the important bit:
From everything I have seen, it appears clear that google stores information about each device that registers with it, and that this in turn will affect SafetyNet.
Therefore, the best way to prevent this leading to SafetyNet failing is to prevent connection with google completely - till the phone is ready.
Before you install microG, make sure your phone has both wifi and data turned off. Leave these off till the setup is complete. Note that only the phone needs to be disconnected, nothing else matters.
In essence, this means that google sees nothing till your device is setup correctly, and then SafetyNet has nothing to complain about.
Now that you've read every word of the above paragraph, go ahead and install microG on your phone.
Make sure you've got all the different components: Core, GSF Framework, FakeStore, and DroidGuard helper. If your installation method does not handle all of this for you, then it sucks, and you shouldn't have used it. Regardless, you can find apks for all of these at https://microg.org/
Step 3: Don't touch
As I've already made clear above, do not change any microG settings at this point. Don't enable device registration (if it's disabled), don't enable safetynet, and just generally leave microG settings alone for now. Oh yeah, and don't turn on wifi or data.
Step 4: Tricking SafetyNet
Everything up till now has just been preparation for actually tricking SafetyNet. So now that we've got all that out the way, let's get down to details:
First, downloads:
Download the latest zip: https://themagisk.com/magiskhide-props-config/
Download the latest zygisk zip: https://themagisk.com/universal-safetynet-fix/
Move these over to your phone and install them both as magisk modules.
Once these modules are installed and you've rebooted, connect your phone to your pc.
Open a terminal/command prompt in your platform tools folder, and type "adb shell props". You may need to grant the superuser permission from your phone.
Then choose option 1.
You'll then need to choose a device from the list available.
The key here is that we need to spoof our device fingerprint, so google thinks the device is certified, even if it actually isn't.
If your device is approved by google, then simply select your device model.
If not, things get a bit more unclear. Not every fingerprint will work for every device - If your device is vastly different from the one you are trying to spoof things may not always work correctly. The best advice I can give here is to choose a device that matches yours as closely as possible. As an example: if your device is made by Xiaomi but is not approved by google, I would select a fingerprint belonging to a Xiaomi device.
Keep in mind that if you try a fingerprint that does not work, you cannot simply switch it to something else and try again, as the SafetyNet history for the device has to be clean.
Once you've spoofed your device fingerprint and rebooted, you're almost ready to test out SafetyNet and google sign in. But first:
Step 5: Do you need signature spoofing?
To ensure things work as smoothly as possible, it's important to make sure you have signature spoofing working before you test SafetyNet. If you've got your own solution to that great. If not:
The first thing I have to point out is that a lot of sigspoof methods on google nowadays are outdated and semi-functional at best, working for a handful of devices. As this guide is intended to be a universal solution regardless of your device, the only answer is lsposed and fakegapps.
Download the latest zygisk zip: https://themagisk.com/lsposed/
Transfer it to your phone and install it as a magisk module.
I've attached the full lsposed manager apk to this post, as the parasitic one sucks. Install it and the fakegapps apk which I've also attached to this post.
You'll now need to enable fakegapps, and turn it on for anything that might need access to spoofing. This includes the system framework, all the microG stuff, and any app that needs to be fooled by microg. Then reboot.
Step 6: Ready to test
Everything should now be set up correctly.
Check the microG settings to make sure signatures are correctly being spoofed.
Enable device registration (if disabled).
Enable SafetyNet attestation.
At this point your phone should still be completely disconnected from the internet.
If you're happy everything is set up correctly, turn on your wifi or data, and test SafetyNet attestation.
Step 7: Done.
Hopefully you now have working SafetyNet and google sign in. If this does work for you, it means that safetynet is now stable on your device, and you are free to install whatever you want on it.
If it didn't work, keep in mind that this hasn't been tested on every device in existence. All I know is that this consistently works for me.
If your phone doesn't turn on, you probably need to charge it.
If your phone has exploded, you probably have a Samsung.
Thanks everyone for reading my guide, I hope you enjoyed! (Maybe it even worked)
Click to expand...
Click to collapse
I have a Samsung galaxy note 10 plus running LineageOS 19.1. I'ts unlocked, and rooted with Magisk. Is there something about Samsung phones that are more likely to "explode" trying to install MicroG?
WheelingPigeon said:
I have a Samsung galaxy note 10 plus running LineageOS 19.1. I'ts unlocked, and rooted with Magisk. Is there something about Samsung phones that are more likely to "explode" trying to install MicroG?
Click to expand...
Click to collapse
Yeah, that's a joke
WheelingPigeon said:
I have a Samsung galaxy note 10 plus running LineageOS 19.1. I'ts unlocked, and rooted with Magisk. Is there something about Samsung phones that are more likely to "explode" trying to install MicroG?
Click to expand...
Click to collapse
Samsung phones have a history of "blowing" up. First they were actually dangerous in very few cases but now they can expand and pop of the back of your phone. As long as you switch the battery then your safe to use it.
AOSP Rom (signature spoofing unsupported, without MicroG installer)
After Root install patch for spoofing via NanoDroid Patcher
Open Magisk settings -> Enable Zygisk + Enforce DenyList, install module MagiskHide Props Config -> reboot
Open Termux or ADB, type su to set root permission then type props (option 1)
Install MicroG via APK or offical F-Droid app, grant Signature spoofing permission
If you want using play store, install patched version (F-Droid add repo NanoDroid)
Open MicroG Settings -> Self-Check -> make sure all box checked
Turn on Google device registration, Google SafetyNet, if CTS fail then install Universal SafetyNet Fix
Install magisk module App Systemizer, Busybox for Android NDK to change MicroG to system app