Hi everyone
I try to flash my device with newflasher but recieve message error device isnot connected in flash mode...
Related
My xperia arc s bricked with installing custom rom,
tried flashing using flashtool but flashtool also stuck at "Device connected in Flashmode"
my device is locked bootloader, rooted and cwm installed,
Please help me...
junaidtahir said:
My xperia arc s bricked with installing custom rom,
tried flashing using flashtool but flashtool also stuck at "Device connected in Flashmode"
my device is locked bootloader, rooted and cwm installed,
Please help me...
Click to expand...
Click to collapse
watch this http://www.youtube.com/watch?v=hPPWRXcsz7g
Hit thanks if it help you
Thnaks for reply but.....
borakx said:
watch this http://www.youtube.com/watch?v=hPPWRXcsz7g
Hit thanks if it help you
Click to expand...
Click to collapse
already trying this but in flashtool when it says "connect your device in flash mode" i connected in flash mode and flash mode shows that device is connected in flash mode but nothing happen then and after few seconds device power off automatically. I think my device is in MTP mode as flashtool say your device should not in MTP mode, is there any way to change mode using flashtool or any other method?
Maybe useing SEUS?
junaidtahir said:
already trying this but in flashtool when it says "connect your device in flash mode" i connected in flash mode and flash mode shows that device is connected in flash mode but nothing happen then and after few seconds device power off automatically. I think my device is in MTP mode as flashtool say your device should not in MTP mode, is there any way to change mode using flashtool or any other method?
Click to expand...
Click to collapse
Is your phone stuck at the Sony Bootloop?
If so the method that i've give you might work!
Which version of flashtools that use?
SUS doesn't work too as it's showing me I have modified a software and it doesn't wan't to work (I am rooted and unlocked). and when i want to flash ftf file and go to flashmode phone do nothing please helpppp..
Dear Experts,
I Unlocked the Bootloader of My Xperia L using the official Sony way. But after the successful unlocking the Phone is not booting at all. It gets stuck at the Xperia colour theme loading... I gone through various posts and found a solution that I have to Flash my phone using flashtools.
Now I instaled flashtools as well as the required drivers. However when I do the flashing in flash mode, the device disconnects automatically and flashtools says that "make sure you are not in MTP mode". I remember that My phone was in MTP mode when i was unlocking the bootloader and the USB debugging was always on... Now after unlocking bootloader the USB Debugging is showing as off (can be seen in the attached file)
After reading couple more posts about MTP ... I understand that I can't successfully flash unless the phone is out of MTP mode, and USB debugging is on. As my mobile is not booting, I can not go to the settings and tick or untick any of the two.
Please help me with a way to do it. I am attaching a screen print of the flashtools for Ref....
It will be a great relief to me....
Thanks in Advance...
You need to connect your phone is flashmode
TakuyaZ said:
You need to connect your phone is flashmode
Click to expand...
Click to collapse
Every Time I connect the phone in flash mode. once it starts flashing process, the phone automatically disconnects and comes on in normal mode.
elroyjolew said:
Every Time I connect the phone in flash mode. once it starts flashing process, the phone automatically disconnects and comes on in normal mode.
Click to expand...
Click to collapse
i have the same problem here..how can we solve this..i am using Sony Xperia C3
Knightfuryz said:
i have the same problem here..how can we solve this..i am using Sony Xperia C3
Click to expand...
Click to collapse
elroyjolew said:
Dear Experts,
I Unlocked the Bootloader of My Xperia L using the official Sony way. But after the successful unlocking the Phone is not booting at all. It gets stuck at the Xperia colour theme loading... I gone through various posts and found a solution that I have to Flash my phone using flashtools.
Now I instaled flashtools as well as the required drivers. However when I do the flashing in flash mode, the device disconnects automatically and flashtools says that "make sure you are not in MTP mode". I remember that My phone was in MTP mode when i was unlocking the bootloader and the USB debugging was always on... Now after unlocking bootloader the USB Debugging is showing as off (can be seen in the attached file)
After reading couple more posts about MTP ... I understand that I can't successfully flash unless the phone is out of MTP mode, and USB debugging is on. As my mobile is not booting, I can not go to the settings and tick or untick any of the two.
Please help me with a way to do it. I am attaching a screen print of the flashtools for Ref....
It will be a great relief to me....
Thanks in Advance...
Click to expand...
Click to collapse
Make a factory reset
TakuyaZ said:
You need to connect your phone is flashmode
Click to expand...
Click to collapse
how to connect in flashmode without using the buttons?im stock in sony logo and i need to turn on usb debugging to use flashtool
1, the adb drivers aren't installed correctly in your pc
2, don't worry about usb debugging
Just connect the phone to the computer in flash mode by pressing vol down and then plug-in the usb cable to your phone.
Flash tool will recognise it automatically if the drivers are installed correctly
3, then reinstall the stock ROM with flash tool
That's it
You said your device is being disconnected while flashing so
When you start flashing from flash tool start the flashing process
(Without connecting the phone to pc)
After the FTF is extracted flash tool will ask to connect the device
Then just connect your device in flash mode
Nikhil kuttu said:
1, the adb drivers aren't installed correctly in your pc
2, don't worry about usb debugging
Just connect the phone to the computer in flash mode by pressing vol down and then plug-in the usb cable to your phone.
Flash tool will recognise it automatically if the drivers are installed correctly
3, then reinstall the stock ROM with flash tool
That's it
You said your device is being disconnected while flashing so
When you start flashing from flash tool start the flashing process
(Without connecting the phone to pc)
After the FTF is extracted flash tool will ask to connect the device
Then just connect your device in flash mode
Click to expand...
Click to collapse
Hello,
Do you know how to install fastboot or flash mode drivers in Windows 10? Also, the flashtool for me is stuck on "please wait until the end of process", how to make it work?
Note: My device gets recognized in ADB when booted up, but does not when in fastboot or flashmode. (Plugging in cable while pressing vol. down)
Manas1796 said:
Hello,
Do you know how to install fastboot or flash mode drivers in Windows 10? Also, the flashtool for me is stuck on "please wait until the end of process", how to make it work?
Note: My device gets recognized in ADB when booted up, but does not when in fastboot or flashmode. (Plugging in cable while pressing vol. down)
Click to expand...
Click to collapse
the drivers will be on the flash tool folder just open the app then tick drivers for Xperia L (thoshan) and general fast boot drivers.
and use the latest flash tool if you can ( Now I am using a Mac so I have a flash tool which was made for apple. but I used to flash my phone using windows and this is the version of the flash tool "flashtool-0.9.18.5" and this worked fine for me ).
if anything else is needed just reply
Frankly, I failed to use Newflasher 6x, my cellphone XZ PREMIUM G8141 TELSTRA AUSTRALIA 47.2.A.10.107
Initially I just wanted to install TWRP and Rooting but I failed because I after UBL continued to install TWRP then I installed Super Su, fatal until BOOTLOOP and No OS Instaled listed on TWRP, I flash using the latest FLASTOOL, it can't, even NewFlaser can't even though my cellphone can't I detected it on Flashtool as a DEVICE CONNECT IN FLASH MODE But it always can't be flashed every time, Newflasher is the same as well, about what the problem is that is going on please, my laptop Windows 10 pro thanks, Finally, I was confused and thought about how my cell phone could come back to life without Bootloop, 3 days I learned it can only flash manually via adb fastboot using ANDROID 8.1 AOSP, I installed the manual one by one from 5 main files:
flash fast boot system
flash fast boot data
flash fast boot recovery
Flash boot fast
flash fast boot kernel from Sony Developer 8.1 AOSP
Finally it is on but it can't do anything because I can't install GAPPS just like an ordinary cellphone that feels old, and I root it with MAGISK its ok.
How can I get back to Os 9.0 47.2.A.10.107 ??? With flashtool and Newflasher still failing, is there a solution ??? Please
Thanks
I would use Emma .https://developer.sony.com/develop/open-devices/get-started/flash-tool/download-flash-tool/
Sorry brother i dont know why in Emma my phone is not detected, but in Newflasher, flashtool, Pc companion it was detected
Phone power off and unplugged. Hold down volume while plugging into computer and Emma should see it. Make sure you have correct drivers.
newflasher should work... make sure you downloaded firmware correctly, and then download latest newflasher and put it inside the folder of firmware. Then run newflasher, first time choose y to install drivers, then after installing, run it again and flash.
Same Problem
Hi Guys, somebody here maybe knows why my flashtool always shows: "Device connected in flash mode but driver is too old" ...
I use the SOMC Flash Device Driver...
What am i doing wrong ?
Please help me out
i try to update my xzp 8is on 7.1.1), via device OTA dosn't appear the update so i try to flash via newflasher but always give an error like timeout and the same occurs with flashtools
anyone can help me?
thanks a lot