Related
Hi guys, my name is Matteo, i'm italian..
i really need your help for installing an original firmware on my G750-T20...
I have Android 4.2.2 with B120, i have downloaded the firmware EMUI 3.0 - 4.4 Kitkat and i have put the file UPDATE.APP in the folder dload inside the SD Card but when i'm trying to installing the file appear this information
md5rsa_verify success
md5_verify success
dloading module CURVER.....
main version string=G750-T20 V100R001CHNC00B251SP02
dloading module VERLIST.....
Main version from property is G750-T20 V100R001CHNC00B120
main version check: the market is the same, go to continue..
Error: current version is not in VERLIST, unallow to update.
Update /sdcard/dload/update.app failed
Please you escuse me for my bad english..
Chisciada
Does anyone can help me ?
Chisciada said:
Hi guys, my name is Matteo, i'm italian..
i really need your help for installing an original firmware on my G750-T20...
I have Android 4.2.2 with B120, i have downloaded the firmware EMUI 3.0 - 4.4 Kitkat and i have put the file UPDATE.APP in the folder dload inside the SD Card but when i'm trying to installing the file appear this information
md5rsa_verify success
md5_verify success
dloading module CURVER.....
main version string=G750-T20 V100R001CHNC00B251SP02
dloading module VERLIST.....
Main version from property is G750-T20 V100R001CHNC00B120
main version check: the market is the same, go to continue..
Error: current version is not in VERLIST, unallow to update.
Update /sdcard/dload/update.app failed
Please you escuse me for my bad english..
Chisciada
Click to expand...
Click to collapse
Glad I found this post.
I have the same problem like that
and I updated my phone via OTA to B122.
I tried tp update Android 4.4.2 EMUI 2.3 by local update method but encountered the same error.
My phone is not rooted so I tried to root it with vRoot 1.7.9 but no success.
Anyone please help us.
Thanks.
I have a G750-T20 hard bricked, that means: no led, no screen, no nothing
Only sounds on the computer when I connect it without the battery and then disconnect, that means one part is still alive (I think) 
Who can help me with a full Rom for this version phone (G750-T20) but in format to use with the Flash Tool to try to revive
Thanks in advance :good:
Sent from my HUAWEI G750-T00 using XDA Free mobile app
Attached images of a clone of G750-T20 ...
Personally I had not seen or had read that these models were cloned, but today they brought me one for service because it is completely dead: HARD BRIKED!!
Apparently they tried to put a G750-T20 stock rom and died ...
Someone had seen these models ??
Any idea where to get software for these clones ??
Hi?
This method is easy, if you want to update android nougat official for your phone
P9(L-19)
°_^ need your phone open boatloder and Twrb
-Instal android nougat beta
http://downloadmirror.co/29Wg/p3-s15-G1079-g104-v56958-f1-full-update.zip
? (using twrb)?
⭕️- After that you can instal nougat offcial (method dload)
Last The latest version B361
You can Download from (firmware finder) this app on play store
Enjoy?
Can you be more specific on what does this Zip File do?
1) What is inside
2) Should it be flashed in TWRP ?
3) Does this wipe the stock rom previously installed?
4) Is it necesary to wipe/format the previous installed rom?
5) Does this then enable us to flash the Huawei Server's UPDATE.APP via -DLOAD mode- ?
6) Does this work with dual sim variant ? with what variants does this works..
Thanks for doing this job, i just add this questions so you can answer them in the Original Post to avoid these questions in the future
Blackmedicine said:
Can you be more specific on what does this Zip File do?
1) What is inside
2) Should it be flashed in TWRP ?
3) Does this wipe the stock rom previously installed?
4) Is it necesary to wipe/format the previous installed rom?
5) Does this then enable us to flash the Huawei Server's UPDATE.APP via -DLOAD mode- ?
6) Does this work with dual sim variant ? with what variants does this works..
Thanks for doing this job, i just add this questions so you can answer them in the Original Post to avoid these questions in the future
Click to expand...
Click to collapse
Welcome?
My english is not good , so Maybe something is not clear , but i try , this method it be simple , and can ask me if any thing is not clear ??
_ zip is nougat beta official , and instal twrb , no extract only download and move SD card then install I think is not working method Dload if on your device M.M, if you need try but before extract zip .
_Rom Nougat beta official was the experience of a copy of the Middle East, EVA-L19 Bkod state C185, but since it worked on this version is likely to work on the rest of the copies of the Middle East, EVA-L19 exclusively and 85%,& work with dual sim
This method does not lose files, preferably the factory reset after the update*?
Any ideas or Questions can ask me here , and thinks.
Lenovo Vibe X2 Custom roms
Finally released my first rom, for a uncommon device - Lenovo VIbe X2.
Very thanks to bug reporters. Should you have any bugs found on my ROM, please reply in this forum. :highfive:
Notes
Code:
To support all versions, you must install a modem. (the default modem is for EU, pre-installed for first boot.
Please go to [URL="https://forum.xda-developers.com/android/software-hacking/lenovo-vibe-x2-modems-t3564185"]this link[/URL]
Since I haven't found the method of building custom rom for dual-sim devices,
this rom currently 0support one sim only.
Need to install open gapps after first setup.
CM 13 Versions(development temporarily stopped)
Code:
20170203 - Installer error ( not able to install at all )
20170628 - AROMA error ( not able to install at all )
20170629 - AROMA installer removed
- Tester needed! ( My vibe x2 is broken )
RR-N Versions
Code:
20180118-24 - Boiling in the terminal [COLOR="Red"]error:[/COLOR] Unknown type name ' MTKLegacyGnssSvStatus '
How to installNote: You're going to lose all your installed apps, app data, system, etc.
1. Upgrade your system to android 5.0+ if available or flash the os here BACKUP ALL YOUR DATA INCLUDING INTERNAL STORAGE AS YOU'LL LOST THEM!!!
2. Right after flashing whole system flash the TWRP recovery here Thanks for BOPOH' Ok
3. Download the latest version of the rom, which should be here within one week
Links
AFH:
CM 13
RR-N
Hi NamelessXXV thank yuo very much for your work. When I try to install your rom I gen an error.
I'm using TWRP recovery and I'm on a x2-CU
Thank you.
Paolo
Lenovo vibe X2-AP
NamelessXXV said:
Cyanogenmod for Lenovo Vibe x2 all version
Finally released my first Cyanogenmod.
Very thanks to bug reporters. Should you have any bugs found on my ROM, please reply in this forum.
Code:
To support all versions, you must install a modem. Please go to [URL="https://forum.xda-developers.com/android/software-hacking/lenovo-vibe-x2-modems-t3564185"]this link[/URL]
Need to install open gapps after first setup.
I'm not able to install modem on my lenovo vibe X2-AP. Please help:angel:
Click to expand...
Click to collapse
Attention please
Links are updated in the main post!
/* Just as an announcement for people who subscribed */
moamahi said:
Hi NamelessXXV thank yuo very much for your work. When I try to install your rom I gen an error.
I'm using TWRP recovery and I'm on a x2-CU
Thank you.
Paolo
Click to expand...
Click to collapse
Thanks for your reply! See above:fingers-crossed:
NamelessXXV said:
Thanks for your reply! See above:fingers-crossed:
Click to expand...
Click to collapse
Thank you for answering
I've tried new version (20170628) and I get: SYNTAX ERROR!!! aroma -config on line 181 col 23.
In another life I've been a developer so I checked and I found some blank spaces unneeded:
"ini_get("rom_name") + " by " + ini_get("rom_author") +
"\n\n"+
"ini_get("rom_name")+" by "+ini_get("rom_author")+"\n\n"+
But now I get again Error 1 and update fail.
Thank you again
moamahi
I have a vibe X2 AP device.. I was searching for this for a long time. Im really happy to see this.I tried installing the rom. it worked fine after pushing the modem file to required location. But I'm not able to use my second sim, It's not shown.. I tried my best to get it work,but it didn't ..
I tried editing build.prop and change single sim mode 'ss' to 'dsda'..
I tried replacing '/system/etc/firmware' and '/system/etc/mddb' folders with that of the AP folder, still no luck!!..
I want some help to get it Working...
This rom work on china version?
pzy64 said:
I have a vibe X2 AP device.. I was searching for this for a long time. Im really happy to see this.I tried installing the rom. it worked fine after pushing the modem file to required location. But I'm not able to use my second sim, It's not shown.. I tried my best to get it work,but it didn't ..
I tried editing build.prop and change single sim mode 'ss' to 'dsda' and sim number to 2 ..
I tried replacing '/system/etc/firmware' and '/system/etc/mddb' folders , still no luck!!..
I want some help to get it Working...
Click to expand...
Click to collapse
Which version worked for you..
Crazy hacker2499 said:
Which version worked for you..
Click to expand...
Click to collapse
His latest Build. But I didn't copy the modem provided by him..I took it from my own stock rom. Then it started showing my Primary sim, Secondary sim was not shown and gave an out-of-coverage-area while calling to it..
Can not install this rom in my phone X2 CU
I try to install the twrp in my device, but i cant, I was reading a lot of forums but I can not find a version for my Lenovo Vibe X2 CU, Can you help me, sorry for my english.
when the rr-n realese
i"m waiting for it my plasure because of my bad english
I am not a professional
As you had seen in the change log I faced a problem that I don't know how to solve it, any professionals can help out here?
Code:
device/lenovo/x2eu/mtk/gps/hal/gps_mtk_aosp.c:1454:5: error: unknown type name 'MTKLegacyGnssSvStatus' MTKLegacyGnssSvStatus sv_status_gnss; ^
ı do some researchs abot this rom unfortunatelly ı couldnt fount anthing abot it.
can you share rom with problelms
for two sims?
i dont can get rr
Hi dears
This is Ali
Today I am going to show how to rebrand to cn variant.
At first you may think why should you rebrand to cn version:
1.faster updates for example oreo will come at first for china
2.more feature like hiding navigation bar or better control on rom and.....
3.All Kangvip roms at first is provided for cn vesions you can download from
Http://cn.club.huawei.com
And.....
So now instruction of installing:
1.download oeminfo of CN
2.extract it to your sd card or otg
3.flash my favorite twrp
4.go to twrp in restore part and after selecting storage restore oem info.
Notice: if didn't find oeminfo backup
Do a backup of your oeminfo then replace files with CN backup
4.select reboot system
5.will take you to eRECOVERY then select
Download latest and recovery
6.select a wifi network and download the rom
Notice: if you saw sth is not working well
Just plug in the cable to phone
Hold power and vol+ button to go to eRECOVERY then download it again
Also you can flash my CN STOCK ROM FLASHABLE BY TWRP:
https://forum.xda-developers.com/8-l...k-rom-t3735362
Now you have successfully rebranded to
PRA-AL00C00
Download links are in next post
Creadits: @dmilz For oeminfo of cn
Press thanks button if you like it or is useful
cn best rom:
https://mega.nz/#!8LZkWRiD!bjlZbAUFJ3THsBdQrKmd6CoWkOzG3FqvdUBCGKJSwvM
cn oeminfo pra-al00x
https://mega.nz/#!YLZFibpA!ayTg0XdiUfVLHyqeBQAqW3XSKiE1r9eZhI9rvFHfU2E
How to fix imei problem is some countries:
As you know this is CN variant so will make some network problems on some operators
First unlock your bootloader and root your phone.
Second by root explorer go to :
Cust/All/CN/prop
And open local.prop
And remove this line from that it is in multimedia part:
ro.config.full_network_support=true
Then do a reboot
Plz hit thanks button if you like it or is useful
Akam_bad said:
Hi dears
This is Ali
Today I am going to show how to rebrand to cn variant.
At first you may think why should you rebrand to cn version:
1.faster updates for example oreo will come at first for china
2.more feature like hiding navigation bar or better control on rom and.....
3.All Kangvip roms at first is provided for cn vesions you can download from
Http://cn.club.huawei.com
And.....
So now instruction of installing:
1.download oeminfo of CN
2.extract it to your sd card or otg
3.flash my favorite twrp
4.go to twrp in restore part and after selecting storage restore oem info.
Notice: if didn't find oeminfo backup
Do a backup of your oeminfo then replace files with CN backup
4.select reboot system
5.will take you to eRECOVERY then select
Download latest and recovery
6.select a wifi network and download the rom
Notice: if you saw sth is not working well
Just plug in the cable to phone
Hold power and vol+ button to go to eRECOVERY then download it again
Also you can flash my CN STOCK ROM FLASHABLE BY TWRP:
https://forum.xda-developers.com/8-lite/development/cn-stock-rom-t3735362
Now you have successfully rebranded to
PRA-AL00C00
Download links are in next post
Creadits: @dmilz For oeminfo of cn
Press thanks button if you like it or is useful
Click to expand...
Click to collapse
Can u share some screeen shots... What about apps lang.
liboct87 said:
Can u share some screeen shots... What about apps lang.
Click to expand...
Click to collapse
Hi bro that is like another stock roms
Just has a few chinese apps those can be uninstalled easily
I have edited rom a bit so now can't send screenshots
But just know
Has some more abilities and more compatible with kang roms
Means no bug
Akam_bad said:
Hi bro that is like another stock roms
Just has a few chinese apps those can be uninstalled easily
I have edited rom a bit so now can't send screenshots
But just know
Has some more abilities and more compatible with kang roms
Means no bug
Click to expand...
Click to collapse
Bro i just wana kn0w. does this ROM includes K-settings..
if m not wrong only hi app will be in Chinese & music player is different from international version.
Akam_bad said:
How to fix imei problem is some countries:
As you know this is CN variant so will make some network problems on some operators
First unlock your bootloader and root your phone.
Second by root explorer go to :
Cust/All/CN/prop
And open local.prop
And remove this line from that it is in multimedia part:
ro.config.full_network_support=true
Then do a reboot
Plz hit thanks button if you like it or is useful
Click to expand...
Click to collapse
No not including k settings
You are doing well bro..
Good thread to help others out...
You so much complicate easy steps. Why this ?
2.extract it to your sd card or otg
3.flash my favorite twrp
4.go to twrp in restore part and after selecting storage restore oem info.
Click to expand...
Click to collapse
My TWRP no read folder with oeminfo on SD card.
Is not it simpler repack oeminfo file in .zip file and install normal from "Install" menu...after change partition to ext4
This is oeminfo for Dual sim or not ?
Feelbg said:
You so much complicate easy steps. Why this ?
My TWRP no read folder with oeminfo on SD card.
Is not it simpler repack oeminfo file in .zip file and install normal from "Install" menu...after change partition to ext4
This is oeminfo for Dual sim or not ?
Click to expand...
Click to collapse
as I said before if didn't find backup
first get a backup from your oeminfo then replace the files
Axan said:
as I said before if didn't find backup
first get a backup from your oeminfo then replace the files
Click to expand...
Click to collapse
Yes i try...and I create folder(dload) and move CN system version here....
After restore(replaced OEMINFO) and press vol+, vol- and power erecovery start and on 5% get error "system install failed"...not compatible with current version and brick
Feelbg said:
Yes i try...and I create folder(dload) and move CN system version here....
After restore(replaced OEMINFO) and press vol+, vol- and power erecovery start and on 5% get error "system install failed"...not compatible with current version and brick
Click to expand...
Click to collapse
what are you doing bro
restore it by twrp
in twrp there is a part its name is restore
and for installing rom go to erecovery and press download latest and recovery will download and instal
Finally rebrand to CN, after 2x time download full OTA...first time in build number i get name "NTD90M test keys".
One big problems on Chinese PRA-AL00 is task manager. Working so much agressive. If clear apps in "recent apps" i no see notifications if no open again aplication.
I don't know how to fix this ?
Feelbg said:
Finally rebrand to CN, after 2x time download full OTA...first time in build number i get name "NTD90M test keys".
One big problems on Chinese PRA-AL00 is task manager. Working so much agressive. If clear apps in "recent apps" i no see notifications if no open again aplication.
I don't know how to fix this ?
Click to expand...
Click to collapse
this is a good ability for saving battery
you can add apps to stay awake in background in battery settings
updated
Axan said:
cn best rom:
https://mega.nz/#!8LZkWRiD!bjlZbAUFJ3THsBdQrKmd6CoWkOzG3FqvdUBCGKJSwvM
cn oeminfo pra-al00x
https://mega.nz/#!YLZFibpA!ayTg0XdiUfVLHyqeBQAqW3XSKiE1r9eZhI9rvFHfU2E
Click to expand...
Click to collapse
updated cn rom
plz use and enjoy
help me!
Hello, I'm new here. I recently bought the honor 8 lite PRA-AL00XC00 Chinese version and am having trouble syncing my apps and google account, so I would like to debrand the Chinese version to Indian version PRA-AL00XC675 but I did not find anywhere a tutorial for this , I also did not find the Indian rom or even the OEMINFO of this version. can you help me?
jeff84souza said:
Hello, I'm new here. I recently bought the honor 8 lite PRA-AL00XC00 Chinese version and am having trouble syncing my apps and google account, so I would like to debrand the Chinese version to Indian version PRA-AL00XC675 but I did not find anywhere a tutorial for this , I also did not find the Indian rom or even the OEMINFO of this version. can you help me?
Click to expand...
Click to collapse
Hi bro i have that
But i suggest rebrand to c185
Also i have uploaded its full twrp backup
Before everything make full backup
Axan said:
updated cn rom
plz use and enjoy
Click to expand...
Click to collapse
hi Axan ? will i tested your trick i do all the way in eRecovery and I installed the rom Chinese PRA-AL00. All work fine but i have a problem with the Build Number it says NDM-test.....
so i can't update also if i boot to do a factory reset it charge to 25% and say errors !!! why the rom don't install normally like the European model ?
Any Solution Axan ?
The Chinese model PRA-AL00 have a beta rom 8.0 in firmware finder i like to test ?
jalel25 said:
hi Axan ? will i tested your trick i do all the way in eRecovery and I installed the rom Chinese PRA-AL00. All work fine but i have a problem with the Build Number it says NDM-test.....
so i can't update also if i boot to do a factory reset it charge to 25% and say errors !!! why the rom don't install normally like the European model ?
Any Solution Axan ?
The Chinese model PRA-AL00 have a beta rom 8.0 in firmware finder i like to test ?
Click to expand...
Click to collapse
hi try again flashing rom by eRECOVERY will fix it
and also if you want to test oreo
this thread can help you
https://forum.xda-developers.com/p8.../guide-holy-emui8-treble-rom-pra-lx1-t3773216
This Guide is for any Xiaomi device with any 'Stock ROM'. Please do the following steps carefully, especially from step 7 to the last step:
Check the current MIUI version on your device, and to do this do the following:
Go to settings> About phone> you will find the version number next to MIUI Version.
You will need to download the same version, so go to the XiaomiRom website.
In the search box above, type your phone’s name, and download the ROM version with the same number you have.
You must make sure that the ROM you are downloading is Recovery version and not Fastboot and it is the same version that is currently on your phone
Now, following the same steps, download the appropriate Indonesian (ID), or European (EU) ROM for your phone with any version number you want but it must be the same Android version.
For example: If you currently have Android 11, the other ROMs must also be Android 11 as well
Now you have two files, the global ROM which is the same as your current version, and the Indonesian ROM that you want to flash.
Go to Settings app > About phone > System updates. Now by pressing the three points above list select the phrase “choose the update package” or the Select Update , the Package .
In case you don’t see this option, simply click on the MIUI logo for 10 consecutive clicks, then the option will appear.
Now, you will choose your “current” official Xiaomi ROM and a message will appear: Your phone will restart automatically with the button: Reboot and update, Leave it and don’t click on it now and leave this page as it is and don’t close it!.
Go to the home screen > file manager > Downloads > then go to the official ROM file that you chose in the previous step and copy its current name “long click with the option to rename and then copy the file name”.
Did you copy the name of the global ROM version? Now delete it!
Again, go to the Indonesian ROM file you downloaded, and rename it, then paste the name of the ROM you copied in the previous step, and do not forget that the file extension is .zip for one time and not duplicated.
Now, go back to the page that I told you not to clos in step 7 and hit the restart and update button.
Now, the phone will reboot, and start installing the Indonesian ROM or any other ROM you downloaded in the first steps on your instead of the global one.
So, what have we done here?! Simply, starting from step 7, the phone told us that we will install the global version of the ROM, so at the same time the system Decrypt it to find out the data of the Zip file of the ROM that you chose, and thus the OS skipped here the stage of making sure that this version is compatible with your current phone.
Then, in step 9 and step 10 we deleted the ‘System Approved’ ROM and renamed the Indonesian ROM to the same name as the ROM the phone approved in Step 7 – so the phone went straight to it since it’s the same name.
Source: Mohamedovic
is it totally safe?
Pls answer, somebody test this method? Is it safe? I have 12.5.3 eu rom and I want change to 12.5.5 global
Mrt.torabi said:
Pls answer, somebody test this method? Is it safe? I have 12.5.3 eu rom and I want change to 12.5.5 global
Click to expand...
Click to collapse
Yes it is safe. But I used this method to downgrade from 12.5.5 Global to 12.0.4 global. As there are news that MIUI 12.5.5 is causing an issue and people's devices are getting hard bricked suddenly.
Thank you in advance, I'm new on this forum. Doing this process, do you lose any data?
Thanks
Mohamedovic said:
This Guide is for any Xiaomi device with any 'Stock ROM'. Please do the following steps carefully, especially from step 7 to the last step:
Check the current MIUI version on your device, and to do this do the following:
Go to settings> About phone> you will find the version number next to MIUI Version.
You will need to download the same version, so go to the XiaomiRom website.
In the search box above, type your phone’s name, and download the ROM version with the same number you have.
You must make sure that the ROM you are downloading is Recovery version and not Fastboot and it is the same version that is currently on your phone
Now, following the same steps, download the appropriate Indonesian (ID), or European (EU) ROM for your phone with any version number you want but it must be the same Android version.
For example: If you currently have Android 11, the other ROMs must also be Android 11 as well
Now you have two files, the global ROM which is the same as your current version, and the Indonesian ROM that you want to flash.
Go to Settings app > About phone > System updates. Now by pressing the three points above list select the phrase “choose the update package” or the Select Update , the Package .
In case you don’t see this option, simply click on the MIUI logo for 10 consecutive clicks, then the option will appear.
Now, you will choose your “current” official Xiaomi ROM and a message will appear: Your phone will restart automatically with the button: Reboot and update, Leave it and don’t click on it now and leave this page as it is and don’t close it!.
Go to the home screen > file manager > Downloads > then go to the official ROM file that you chose in the previous step and copy its current name “long click with the option to rename and then copy the file name”.
Did you copy the name of the global ROM version? Now delete it!
Again, go to the Indonesian ROM file you downloaded, and rename it, then paste the name of the ROM you copied in the previous step, and do not forget that the file extension is .zip for one time and not duplicated.
Now, go back to the page that I told you not to clos in step 7 and hit the restart and update button.
Now, the phone will reboot, and start installing the Indonesian ROM or any other ROM you downloaded in the first steps on your instead of the global one.
So, what have we done here?! Simply, starting from step 7, the phone told us that we will install the global version of the ROM, so at the same time the system Decrypt it to find out the data of the Zip file of the ROM that you chose, and thus the OS skipped here the stage of making sure that this version is compatible with your current phone.
Then, in step 9 and step 10 we deleted the ‘System Approved’ ROM and renamed the Indonesian ROM to the same name as the ROM the phone approved in Step 7 – so the phone went straight to it since it’s the same name.
Source: Mohamedovic
Click to expand...
Click to collapse
I have just tried, but didn't work... ""
Mohamedovic said:
This Guide is for any Xiaomi device with any 'Stock ROM'. Please do the following steps carefully, especially from step 7 to the last step:
Check the current MIUI version on your device, and to do this do the following:
Go to settings> About phone> you will find the version number next to MIUI Version.
You will need to download the same version, so go to the XiaomiRom website.
In the search box above, type your phone’s name, and download the ROM version with the same number you have.
You must make sure that the ROM you are downloading is Recovery version and not Fastboot and it is the same version that is currently on your phone
Now, following the same steps, download the appropriate Indonesian (ID), or European (EU) ROM for your phone with any version number you want but it must be the same Android version.
For example: If you currently have Android 11, the other ROMs must also be Android 11 as well
Now you have two files, the global ROM which is the same as your current version, and the Indonesian ROM that you want to flash.
Go to Settings app > About phone > System updates. Now by pressing the three points above list select the phrase “choose the update package” or the Select Update , the Package .
In case you don’t see this option, simply click on the MIUI logo for 10 consecutive clicks, then the option will appear.
Now, you will choose your “current” official Xiaomi ROM and a message will appear: Your phone will restart automatically with the button: Reboot and update, Leave it and don’t click on it now and leave this page as it is and don’t close it!.
Go to the home screen > file manager > Downloads > then go to the official ROM file that you chose in the previous step and copy its current name “long click with the option to rename and then copy the file name”.
Did you copy the name of the global ROM version? Now delete it!
Again, go to the Indonesian ROM file you downloaded, and rename it, then paste the name of the ROM you copied in the previous step, and do not forget that the file extension is .zip for one time and not duplicated.
Now, go back to the page that I told you not to clos in step 7 and hit the restart and update button.
Now, the phone will reboot, and start installing the Indonesian ROM or any other ROM you downloaded in the first steps on your instead of the global one.
So, what have we done here?! Simply, starting from step 7, the phone told us that we will install the global version of the ROM, so at the same time the system Decrypt it to find out the data of the Zip file of the ROM that you chose, and thus the OS skipped here the stage of making sure that this version is compatible with your current phone.
Then, in step 9 and step 10 we deleted the ‘System Approved’ ROM and renamed the Indonesian ROM to the same name as the ROM the phone approved in Step 7 – so the phone went straight to it since it’s the same name.
Source: Mohamedovic
Click to expand...
Click to collapse
It didn´t work
affan848 said:
Yes it is safe. But I used this method to downgrade from 12.5.5 Global to 12.0.4 global. As there are news that MIUI 12.5.5 is causing an issue and people's devices are getting hard bricked suddenly.
Click to expand...
Click to collapse
no its hardware issue. im using 12.5.5 two months now and no heat, no problems. The majority that got bricked is bhima device, and even bricked on 12.0 fw for some people
Areasu said:
no its hardware issue. im using 12.5.5 two months now and no heat, no problems. The majority that got bricked is bhima device, and even bricked on 12.0 fw for some people
Click to expand...
Click to collapse
That's great. I also updated again to 12.5.5 because there were many isuues in 12.0.4 too
affan848 said:
Yes it is safe. But I used this method to downgrade from 12.5.5 Global to 12.0.4 global. As there are news that MIUI 12.5.5 is causing an issue and people's devices are getting hard bricked suddenly.
Click to expand...
Click to collapse
You should have recorded a video of this process. There could be some after effect. Like OTA and trying to get back to the main stock Rom
Bolumstar said:
You should have recorded a video of this process. There could be some after effect. Like OTA and trying to get back to the main stock Rom
Click to expand...
Click to collapse
I followed a guide from YouTube. It was already recorded and well explained. Search Downgrade Poco X3 pro on YouTube. Not sure if I can share link here
affan848 said:
I followed a guide from YouTube. It was already recorded and well explained. Search Downgrade Poco X3 pro on YouTube. Not sure if I can share link here
Click to expand...
Click to collapse
Give the exact title here if you can't post link yet. That way it will help others to be convinced
Bolumstar said:
Give the exact title here if you can't post link yet. That way it will help others to be convinced
Click to expand...
Click to collapse
Search "downgrade poco x3 pro" on YouTube and watch first video posted by munchy
Video title "Xiaomi Poco X3 Pro | Downgrade MIUI 12.5 to MIUI 12 | Locked Bootloader | NO TWRP | Without Computer"
Video total duration is 12:37
Thanks
Mohamedovic said:
This Guide is for any Xiaomi device with any 'Stock ROM'. Please do the following steps carefully, especially from step 7 to the last step:
Check the current MIUI version on your device, and to do this do the following:
Go to settings> About phone> you will find the version number next to MIUI Version.
You will need to download the same version, so go to the XiaomiRom website.
In the search box above, type your phone’s name, and download the ROM version with the same number you have.
You must make sure that the ROM you are downloading is Recovery version and not Fastboot and it is the same version that is currently on your phone
Now, following the same steps, download the appropriate Indonesian (ID), or European (EU) ROM for your phone with any version number you want but it must be the same Android version.
For example: If you currently have Android 11, the other ROMs must also be Android 11 as well
Now you have two files, the global ROM which is the same as your current version, and the Indonesian ROM that you want to flash.
Go to Settings app > About phone > System updates. Now by pressing the three points above list select the phrase “choose the update package” or the Select Update , the Package .
In case you don’t see this option, simply click on the MIUI logo for 10 consecutive clicks, then the option will appear.
Now, you will choose your “current” official Xiaomi ROM and a message will appear: Your phone will restart automatically with the button: Reboot and update, Leave it and don’t click on it now and leave this page as it is and don’t close it!.
Go to the home screen > file manager > Downloads > then go to the official ROM file that you chose in the previous step and copy its current name “long click with the option to rename and then copy the file name”.
Did you copy the name of the global ROM version? Now delete it!
Again, go to the Indonesian ROM file you downloaded, and rename it, then paste the name of the ROM you copied in the previous step, and do not forget that the file extension is .zip for one time and not duplicated.
Now, go back to the page that I told you not to clos in step 7 and hit the restart and update button.
Now, the phone will reboot, and start installing the Indonesian ROM or any other ROM you downloaded in the first steps on your instead of the global one.
So, what have we done here?! Simply, starting from step 7, the phone told us that we will install the global version of the ROM, so at the same time the system Decrypt it to find out the data of the Zip file of the ROM that you chose, and thus the OS skipped here the stage of making sure that this version is compatible with your current phone.
Then, in step 9 and step 10 we deleted the ‘System Approved’ ROM and renamed the Indonesian ROM to the same name as the ROM the phone approved in Step 7 – so the phone went straight to it since it’s the same name.
Source: Mohamedovic
Click to expand...
Click to collapse
thank you.will i loose any data?i want to go ID for enable call record
Is google play certification passes with this method? Are Playstore and other google apps work after switching Rom's area for instance Global to Indonesia or EU?
If it helps anyone who comes to this thread and interested in the answer: I Switched from 12.5.7 Global to 12.0.3 Indonesian rom. After restart a data wipe was needed. I haven't signed in any google account yet but google play protection says that my device is certified.
I have 12.5.4(RJUEUXM) EEA, could I flash 12.5.7(RJUMIXM) Global using this method? I assume so, but my question is, will it need a full wipe?
Also, can I flash a xiaomi.eu recovery using this method, or is it silly to even consider it?
I installed MiUI 12.5.4.0 indonasian on my Global Poco X3 pro after unlocking bootloader. And now I have Upgraded it to MiUI 12.5.7 Global using this method. By doing this, my data was not erased. Everything seems to be working but after few hours I noticed that some apps e.g SMS is not opening. I am resetting my device now as I have already backed up my data.
Thanks for tutorial. Munchy's video helped a lot as well.
My phone with Android 10 and also MIUI 12.0.5 and I want to change to ROM MIUI 12.5 and Android 11 can I change or not?
I try to go from Global_V12.5.4.0.RJUEUXM to xiaomi.eu_multi_POCOX3Pro_V12.5.7.0.RJUMIXM but it didn'r work for me.
Boot locked here.
<Moderator Edit>: English translation added to the top.
Hello, I have mi 11 lite 5G EU, I try to go to Global, I try like in this topic, but I have these messages and it does not work, anyone know how to fix it
Original:
Bonjour, j'ai mi 11 lite 5G EU, j'essaie d'aller sur Global, j'essaie comme dans ce sujet, mais j'ai ces messages et ça ne marche pas, quelqu'un sait comment le réparer