Related
How do you install a kernel that you built yourself?
---------------------------------
The answer, as I understand it:
Build a kernel, with some variation of "make zImage" as the last step
Make a gzipped ramdisk image by one of the two following methods:
Use cpio and gzip (like a standard linux initial-ramdisk)
Use mkbootfs (from Android Kitchen)
Create a boot image from the gzipped ramdisk and the kernel zImage by one of the two following methods:
Use abootimg
abootimg is available for ubuntu, and is included in the ubuntu images that rabits was distributing
Use mkbootimg (from Android Kitchen)
Convert the boot image to a blob with "blobpack" (part of blobtools)
More details as I experiment with this process.
bsammon said:
Is there a guide to how to install a kernel that you built yourself?
I've seen bits and pieces of this in various threads, but no complete (or semi-complete) document on how it's done.
Click to expand...
Click to collapse
I have been searching on this topic as well. You would have a better luck searching if you use a key word like "Unpack and Repack Kernel or Ramdisk".. Good luck..
You don't know my kernel repacking guide? -> http://forum.xda-developers.com/showpost.php?p=36925180&postcount=4
_that said:
You don't know my kernel repacking guide? -> http://forum.xda-developers.com/showpost.php?p=36925180&postcount=4
Click to expand...
Click to collapse
Thanks for the head up. I will look into it... :good:
Ahh... the development forum -- that's why I didn't see it. I'll take a look at that.
_that said:
You don't know my kernel repacking guide? -> http://forum.xda-developers.com/showpost.php?p=36925180&postcount=4
Click to expand...
Click to collapse
Where do I get the "mkbootfs" and "mkbootimg" tools mentioned in that guide?
bsammon said:
Where do I get the "mkbootfs" and "mkbootimg" tools mentioned in that guide?
Click to expand...
Click to collapse
I think they are part of the Android source. Standalone sources are available in dsixda's Android Kitchen, which is what I use.
_that said:
I think they are part of the Android source. Standalone sources are available in dsixda's Android Kitchen, which is what I use.
Click to expand...
Click to collapse
I think you mean this Android Kitchen. It appears that Asus devices aren't supported by Android Kitchen, but it's your experience that it works anyway?
bsammon said:
I think you mean this Android Kitchen. It appears that Asus devices aren't supported by Android Kitchen, but it's your experience that it works anyway?
Click to expand...
Click to collapse
Nah the tools mkbootfs and mkbootimg from dsixda's android kitchen work fine.
bsammon said:
I think you mean this Android Kitchen. It appears that Asus devices aren't supported by Android Kitchen, but it's your experience that it works anyway?
Click to expand...
Click to collapse
Yes, that one. I've never used the menu-driven stuff, but you can learn a lot from reading its scripts - and many of the tools included in the kitchen work fine for all Android devices.
Introduction
You probably know already that starting from Android 5.x (Lollipop) compiled roms (aosp,cm,stock) are not compressed anymore the way they used to be on previous android versions. On previous versions all content inside /system folder that has to be extracted within our device was either uncompressed (simple /system folder inside our flashable zip) or compressed in a system.img file, which it is a ext4 compressed file; both of these, anyway, were readable and we could see all system files (app,framework, etc).
The problem comes in >=5.0 versions, this method is not used anymore. Why? Because roms started to be always larger, so it is necessary to compress them even more.
Note : Introduction was taken from here : https://forum.xda-developers.com/an.../how-to-conver-lollipop-dat-files-to-t2978952 by @xpirt so thanks to him
So in order to save myself and others who most port Custom & Stock Roms, i decided to use some part of my time to write this script for easy work done.
What this script does :
It basically Unpack and Repack system.new.dat alongside with file_context.bin convertion which is seen in android 7.0/7.1
ITS USAGE:
NOTE
First Clone the repo.
Make sure that Android_System_Extraction_and_Repack_Tool is located at Desktop
Run "Xtrakt" from it's location in terminal
Copy "file_contexts.bin" from your Rom to "file_context_zone" folder
Use "f" from menu to convert "file_contexts.bin" to text readable "file_contexts"
Copy : system.new.dat, system.transfer.list & file_contexts to "convert-dat" folder.
Use "i" from menu to unpack, which the output will be name as "rom_system" for modifications of apks & files.
Use "y" from menu to repack, which the complete new "system.new.dat", "system.patch.dat" & "system.transfer.list" will be located at "Finish-new.dat" folder
Done !
EXAMPLE:
Again , Make sure that Android_System_Extraction_and_Repack_Tool is located at Desktop
In your terminal, type the following to start the script:
Code:
git clone https://github.com/iykequame/Android_System_Extraction_and_Repack_Tool.git
mv android_system_extraction_and_repack_tool ~/Desktop/
cd ~/Desktop/android_system_extraction_and_repack_tool/
./Xtrakt
OR
Code:
Double-click the Xtrakt file and choose "Run in Terminal" if your OS supports it.
##ALERT!!!##
sudo is requested in the script.
How To Get It {Tool]
Clone from one of the below ;
From GITHUB :
Code:
git clone https://github.com/iykequame/Android_System_Extractrion_and_Repack_Tool.git
From BITBUCKET :
Code:
git clone https://[email protected]/zac6ix/android_system_extraction_and_repack_tool.git
Or
Download zip
AFH
GIT-RELEASE
Sources :
Android_System_Extraction_and_Repack_Tool
GITHUB
BITBUCKET
Threads :
sdat2img 1.0 - img2sdat 1.2
For file_context.bin conversion by: Pom Kritsada @ MTK THAI Developers.
Credit to :
@xpirt
@SuperR.
-all xda threads which helped
-Android Matrix Development - here
-Nana Yaa for her time.
hi, your tool sounds good but it seems it doesnt work.
i press f and nothing happen ..
Use "f" from menu to convert **"file_contexts.bin"** to text readable **"file_contexts"**
Blackball said:
hi, your tool sounds good but it seems it doesnt work.
i press f and nothing happen ..
Use "f" from menu to convert **"file_contexts.bin"** to text readable **"file_contexts"**
Click to expand...
Click to collapse
Sorry for the Late reply !
Directories linking has been fix .
You can go ahead and try again
Thanks for sharing!
Don't work
When i press i ..Don't work.say file missing.but i already put all file..Please help meView attachment 4249470
Doesn't do anything with file_context.bin, doesn't even check if file is there.
oreo supported???
I am getting this error on repacking:-
Code:
WARNING! WARNING!! WARNING!!!
Please Check & Trace Where Errors.
There Is NO rom_system found
file_contexts -->> Missing !
Android SDK -->> not detected !
Please help.
Black_J said:
I am getting this error on repacking:-
Code:
WARNING! WARNING!! WARNING!!!
Please Check & Trace Where Errors.
There Is NO rom_system found
file_contexts -->> Missing !
Android SDK -->> not detected !
Please help.
Click to expand...
Click to collapse
I see that this thread is not supported.
Anyways, I observed that the tool works for file_contexts.bin but not for other options.
So , I followed the other link in the thread for individual commands and was successful.
Works perfectly on Android Pie! Have to do some tweaks, PM me if anyone wants to make this work for Android Pie.
Note:I am sorry I can't post this in the Android development thread because my number of posts is low. Hopefully some mod can move it there.
Introduction
Since this project (Android_IMG_REPACK_TOOLS) is dead for 2 years now (last supported version is Marshmallow). I decided to do a new rom repacker that supports up to Android Oreo.
Supported OS
Linux
Supported Android Versions
android-5 (Lollipop)
android-wear-5
android-6 (Marshmallow)
android-7 (Nougat)
android-8 (Oreo)
android-9 (Pie) beta
Binaries included
append2simg
img2simg
simg2img
simg2simg
make_ext4fs (Google removed it for android 9. I will add a replacement in the future)
mkbootfs
mkbootimg
unpackbootimg (For android-wear-5, you can use the one in android-5)
sefcontext_compile
sefcontext_decompile
Usage
Check this post out for some use case. You'll need img2simg and make_ext4fs from my post.
sefcontext_compile and sefcontext_decompile:
ROMS since Android 7 (Nougat) come with a binary file_contexts but you need a text based file_contexts when you need to repackage the ROM. You'll need it for make_ext4fs. sefcontext_decompile converts the binary file_contexts into text version.
Code:
# file_contexts (human readable text file) -> file_contexts.bin (PCRE formatted binary file)
sefcontext_compile [-o <output_file>] <text_file>
# file_contexts.bin (PCRE formatted binary file) -> file_contexts (human readable text file)
sefcontext_decompile [-o <output_file>] <binary_file>
Source code
Repository
android-5
android-wear-5
android-6
android-7
android-8
android-9
Download links for Linux
Download page
android-5
android-wear-5
android-6
android-7
android-8
android-9
Change Log:
v3:
Added android-5 and android-wear-5 support
Added android-9 beta support
v2:
Added sefcontext_compile and sefcontext_decompile: converts between file_contexts.bin and file_contexts
Static linking to libc++: No need to install 3rd party libraries to use the binaries.
v1:
Added append2simg img2simg simg2img simg2simg make_ext4fs mkbootfs mkbootimg unpackbootimg
credits:
@A.S._id
android.googlesource
LineageOS
Created: 2018-03-16
Updated: 2018-08-18
[Placeholder]
[Placeholder2]
Can i extract a rom if i have only ssyetm. New. Dat??, i have file context. Bin in boot. Img can it be used?
I know usual extraction needs both these+system. Transfer. List but a rom which i m using have just this configuration.
what is simg2simg?
and how to make system.new.dat.br?
thanks for your work
zheshifandian said:
what is simg2simg?
and how to make system.new.dat.br?
thanks for your work
Click to expand...
Click to collapse
Use brtoli. Exe to make. Br from. Dat format
narshi shukla said:
Can i extract a rom if i have only ssyetm. New. Dat??, i have file context. Bin in boot. Img can it be used?
I know usual extraction needs both these+system. Transfer. List but a rom which i m using have just this configuration.
Click to expand...
Click to collapse
I believe this question is better suited in this thread. You'll need system.transfer.list in sdat2img.py which is provided over there. I haven't worked on a ROM that doesn't have system.transfer.list. Isn't system.transfer.list required for flashing the ROM?
Btw you need to convert file_context.bin to text format. There are a couple of closed source solutions here on xda. I am working on an open source version in my free time.
zheshifandian said:
what is simg2simg?
Click to expand...
Click to collapse
You can find answers to a lot of the questions you might have in the old project.
A.S._id said:
Yes, simg2simg can reduce file size by splitting into several parts, but it is usually not necessary, fastboot can flash and in this state
Click to expand...
Click to collapse
Awesomeness, easy and simple
hi bro i want extract oreo system.new.dat.br and also repack dat to .br in windows
please help me bro
and im unable to convert oreo file_context.bin to readable in windows
please help thanks in advance
New version available in Original Post.
Change log
v2:
Added sefcontext_compile and sefcontext_decompile: converts between file_contexts.bin and file_contexts
Static linking to libc++: No need to install 3rd party libraries to use the binaries.
marshharsha said:
hi bro i want extract oreo system.new.dat.br and also repack dat to .br in windows
please help me bro
and im unable to convert oreo file_context.bin to readable in windows
please help thanks in advance
Click to expand...
Click to collapse
Oreo ROMs come compressed by brotili. You can compile from source to get the executable or you can get the binaries directly from the release page (version 1.0). Use it to extract and repack .br.
I added a converter from file_context.bin to a readable format in the new version I just uploaded.
This project only supports Linux as of now. As for using it in Windows, you have 3 options,
Use a linux distro in VirtualBox (I currently use this option)
Install a linux bash shell in Windows 10
Build the project in Cygwin (hopefully someone can make a pull request and share it with the rest)
rkhat said:
Oreo ROMs come compressed by brotili. You can compile from source to get the executable or you can get the binaries directly from the release page (version 1.0). Use it to extract and repack .br.
I added a converter from file_context.bin to a readable format in the new version I just uploaded.
This project only supports Linux as of now. As for using it in Windows, you have 3 options,
Use a linux distro in VirtualBox (I currently use this option)
Install a linux bash shell in Windows 10
Build the project in Cygwin (hopefully someone can make a pull request and share it with the rest)
Click to expand...
Click to collapse
thanks brother for your kind reply can you give guide for make exe from brotli source? with java or c
thanks again
marshharsha said:
thanks brother for your kind reply can you give guide for make exe from brotli source? with java or c
thanks again
Click to expand...
Click to collapse
Just use a pre-built brotli from the release page (there is a window version). It doesn't matter that the executable is not the latest version as you only need to extract compress the .br file.
If you really need to build brotli for windows, just open scripts/appveyor.yml in the github repository. Decide which environment you want (I see they support 32-bit/64-bit versions for Visual Studio, Python, MinGW). Download the necessary software (python, mingw ...). Then run the commands in appveyor.yml using cmd in this order.
@rkhat
Hi and thanks for making the tools for us.
I am getting the below error when ./img2simg new-system.img news-system.img. I downloaded version for Nougat.
img2simg: /android-rom-repacker/external/platform/core/src/libsparse/sparse.c:153: int write_all_blocks(struct sparse_file *, struct output_file *): Assertion `pad >= 0' failed.
Aborted
I am running Ubuntu. Do you know what might be the problem ?
sdeft said:
@rkhat
Hi and thanks for making the tools for us.
I am getting the below error when ./img2simg new-system.img news-system.img. I downloaded version for Nougat.
img2simg: /android-rom-repacker/external/platform/core/src/libsparse/sparse.c:153: int write_all_blocks(struct sparse_file *, struct output_file *): Assertion `pad >= 0' failed.
Aborted
I am running Ubuntu. Do you know what might be the problem ?
Click to expand...
Click to collapse
Just tested a Nougat lineage ROM for Nexus 7 from here. No issues!
Are you sure you used this version for Nougat?
If you still have issues, can you link me the zipped ROM and more importantly the source you got it from so I can test it out? Thank you.
rkhat said:
Just tested a Nougat lineage ROM for Nexus 7 from here. No issues!
Are you sure you used this version for Nougat?
If you still have issues, can you link me the zipped ROM and more importantly the source you got it from so I can test it out? Thank you.
Click to expand...
Click to collapse
I think I found the issue. This is happening only when i perform it on the image created with
./make_ext4fs -s -l 3000M -a system new-system.img tmp/
If I just umount the image and then apply img2simg it works.
Is this strange or what ?
sdeft said:
I think I found the issue. This is happening only when i perform it on the image created with
./make_ext4fs -s -l 3000M -a system new-system.img tmp/
If I just umount the image and then apply img2simg it works.
Is this strange or what ?
Click to expand...
Click to collapse
Don't use "-s" (lowercase s) option. It only writes sparse headers in new-system.img. The file is only couple MBs instead of 3000MB you specified. I am curious how img2simg even worked.
Also, use "-S file_contexts" (uppercase S) option to apply the security contexts on files. The zipped ROM has file_contexts.bin (binary version) since Android Nougat. You'll need to convert it to text format. You can use the executable sefcontext_decompile included in my tools to convert file_contexts.bin to file_contexts.
rkhat said:
Don't use "-s" (lowercase s) option. It only writes sparse headers in new-system.img. The file is only couple MBs instead of 3000MB you specified. I am curious how img2simg even worked.
Also, use "-S file_contexts" (uppercase S) option to apply the security contexts on files. The zipped ROM has file_contexts.bin (binary version) since Android Nougat. You'll need to convert it to text format. You can use the executable sefcontext_decompile included in my tools to convert file_contexts.bin to file_contexts.
Click to expand...
Click to collapse
I am not using a zipped rom with file_contexts.bin, system.new.dat etc.
I am trying to mod a system.img from a fastboot rom for xiaomi. So far only managed to have the userdata.img working but system.img keeps giving me bootloops!. Will try your suggestion above...
build use cygwin window 7 x64
how build use cygwin on w7 x64? or can you make for windows too?
sorry for bad engglish
anggafzkdev99 said:
how build use cygwin on w7 x64? or can you make for windows too?
sorry for bad engglish
Click to expand...
Click to collapse
I don't use windows in this project. So you're on your own in building using cygwin
Alternatively, you can use Ubuntu on VirtualBox which is what I currently use.
Jancox Tool Unpack Repack ROMs
Jancox tool is a tool for unpacking and repacking ROMs, in other words this is a tool for modification Android ROM, and it supports Linux, Android and Windows.
Requestment
Requestment Linux
- Installed Python 3
Requestment Android
- Installed Python 3 in Termux
Requestment Windows
- None
How To Use In Linux
]
Code:
~$ ./unpack.sh
~$ ./repack.sh
~$ ./cleanup.sh
How To Use In Android
- Rename your rom to input.zip
- Move input.zip to /sdcard/input.zip or /sdcard/download/input.zip or /data/local/jancox-tool/input/input.zip
- Open termina/termux
Code:
~$ su
~$ jancox
- Output in /data/local/jancox-tool/editor
How To Use In Windows
- Extrack Jancox-Tool-Windows
- Rename your rom to input.zip
- Move input.zip to jancox tool folder
- Run unpack
- Edit rom in editor folder
- Run repack
- Cleanup for clean files
Video
Linux Guide :
Android Guide :
Windows Guide :
Download
Click Here
Source
https://github.com/Wahyu6070/Jancox-tool
https://github.com/Wahyu6070/Jancox-tool-Linux
https://github.com/Wahyu6070/Jancox-tool-Android
https://github.com/Wahyu6070/Jancox-Tool-Windows
Credit :
Jamflux SUR windows : https://github.com/jamflux/SUR
Magiskboot : topjohnwu
make_ext4fs : SuperR
Busybox : https://busybox.net/
7za : https://www.7-zip.org/
Brotli : https://github.com/google/brotli
Img2sdat/sdat2img : https://github.com/xpirt/img2sdat
python : based termux
Changelog
Linux v2.0
- Support img only
- Added brotli support
- Added boot extractor
- Added brotli level set
- and other improvements
Mobile v2.3
- Using kopi installer (support magisk non magisk)
- move zip compression 7z to zip
- improv debloater
- added disable dm-verity
- added change name
- added dat prop (jancox.prop)
- and other improvements
Windows v2.0
- Initial Release
Repack gagal terus pak
How to fix?
Erwin Abs said:
How to fix?
Click to expand...
Click to collapse
try install busybox
Wahyu6070 said:
try install busybox
Click to expand...
Click to collapse
l
Hello! I got error "unzip: invailid zip magic C26CB134"
How can i solve this problem? Busybox was installed.
Thanks
thienmoc198x said:
l
Hello! I got error "unzip: invailid zip magic C26CB134"
How can i solve this problem? Busybox was installed.
Thanks
Click to expand...
Click to collapse
update to version 2.2 if you still find problems send me the log
awesome work bro. thank you so much!
Really excited about this app!
One question: tools can only ota zip? If only .img file is available, then split first in boot.img, system.img, vendor.img etc but then?
How to fix ?
Malware Alert
Sourceforge link is showing a malware alert for your build. See the attached image.
hi, i want unpack only boot.img, made a input.zip with boot.img, unpack perfect, but cant pack again, receive a message please unpack, some idea why?
thanks and good work
sir, do you know how to unpack blackshark1's rom ?
failed by payload dumper
-----
bg, tau cara unpack rom nya blackshark 1 ga ?
pake payload dumper ga mempan
Need to be able to unpack Nokia roms. Format .nb0. Its possible to add this support to your already awesome tool? (Linux) Thanks in advance.
Hi
I unpacked and repacked the miui 12 ROM with this method, but unfortunately, after flashing the ROM, it did not boot and the phone was transferred to fast boot.pleace help to solve this problem .Thank you.
Please help me admin and all,
Has anyone already edited service.jar using the jancoxx tool.?
Wahyu6070 said:
Jancox Tool Unpack Repack ROMs
Jancox tool is a tool for unpacking and repacking ROMs, in other words this is a tool for modification Android ROM, and it supports Linux, Android and Windows.
Requestment
Requestment Linux
- Installed Python 3
Requestment Android
- Installed Python 3 in Termux
Requestment Windows
- None
How To Use In Linux
]
Code:
~$ ./unpack.sh
~$ ./repack.sh
~$ ./cleanup.sh
How To Use In Android
- Rename your rom to input.zip
- Move input.zip to /sdcard/input.zip or /sdcard/download/input.zip or /data/local/jancox-tool/input/input.zip
- Open termina/termux
Code:
~$ su
~$ jancox
- Output in /data/local/jancox-tool/editor
How To Use In Windows
- Extrack Jancox-Tool-Windows
- Rename your rom to input.zip
- Move input.zip to jancox tool folder
- Run unpack
- Edit rom in editor folder
- Run repack
- Cleanup for clean files
Video
Linux Guide :
Android Guide :
Windows Guide :
Download
Android
Linux
Windows
Source
https://github.com/Wahyu6070/Jancox-tool-Linux
https://github.com/Wahyu6070/Jancox-tool-Android
https://github.com/Wahyu6070/Jancox-Tool-Windows
Credit :
Jamflux SUR windows : https://github.com/jamflux/SUR
magiskboot : topjohnwu
make_ext4fs : SuperR
busybox : https://busybox.net/
busybox : https://github.com/Magisk-Modules-Repo/busybox-ndk
7za : https://www.7-zip.org/
brotli : https://github.com/google/brotli
img2sdat/sdat2img : https://github.com/xpirt/img2sdat
python : based termux
XDA:DevDB Information
[TOOL[LINUX][ANDROID][WINDOWS] Jancox Tool Unpack/Repack ROMs, Tool/Utility for the Android General
Contributors
Wahyu6070
Version Information
Status: Stable
Current Stable Version: 2.0
Created 2020-04-11
Last Updated 2020-08-12
Click to expand...
Click to collapse
supports super.img?
How can I add a apk to the priv-apps folder and give the apk all the permissions like camera, location ,draw over other apps, etc
I unpacked miui china rom, added some gapps and now when i am trying to repack i am getting following error.
[system/product/app/LatinImeGoogle] not found in canned fs_config, using defaults
How to fix this issue and continue repacking?
I have only following files related to configs.
RSM10 said:
I unpacked miui china rom, added some gapps and now when i am trying to repack i am getting following error.
[system/product/app/LatinImeGoogle] not found in canned fs_config, using defaults
How to fix this issue and continue repacking?
I have only following files related to configs.
View attachment 5338745
Click to expand...
Click to collapse
add system/product/app/LatinImeGoogle to fs_config file.
Hi everyone, I am a RMX2071 owner and I was experimenting with GSI images, I have installed the AOSP 10 GSI (AOSP 10.0 v222) Source: https://github.com/phhusson/treble_experimentations/releases/tag/v222
Seems like it works except for the fingerprint (it doesn't work) and the camera that could be better. I'm not a developer nor I'm familiar with Android modding. I have bricked my phone several times during the attempt. This is not an advice or guide, everything you do is at your own risk.
I had unlocked bootloader and TWRP (Source: https://forum.xda-developers.com/realme-x50-pro/how-to/recovery-lr-team-twrp-3-4-1b-0616-t4123353)
This is what I did:
I have downloaded the latest firmware for my device from realmeupdater (https://realmeupdater.com/)
It was an OZIP file, I have unpacked with this tool (https://github.com/bkerler/oppo_ozip_decrypt)
Now I have a zip file
I have downloaded a GSI .img image (I have tried many, the one listed is the one that works best for now)
I have used this tool (https://github.com/xpirt/img2sdat) to convert .img to three .dat files: system.new.dat, system.patch.dat, system.transfer.list
I have used this other tool (https://github.com/VarunSaiTeja/Brotli-Rom-Manager) to convert system.new.dat into system.new.dat.br
I have deleted this three files from the the official rom zip, using 7zip: system.new.dat.br, system.patch.dat, system.transfer.list
I have added to the official rom zip the files just created: system.new.dat.br, system.patch.dat, system.transfer.list
I have put the zip on a flash drive. I have booted in recovery, wiped everything, flashed the zip, closed AVB2.0 from advanced menu, booted into system.
There could be many bugs I have only tested for some hours, I'm sharing this because some expert could find a way to make fingerprint work, modify the top bar to accommodate the camera hole and find a better camera app.
I'm uploading the zip I have created, I'll post it soon.
Pic: https://mega.nz/file/8ApUXYBJ#kYBqwpDfMEF_MdxLCnTQCtITA8rV6YlENWCkkPzMM1E
link to the modified zip: https://mega.nz/file/gN5gjKTB#pkQHQotBhY7IocGZWj9iwwWEoTM9x5APSVYsTgH4Pak
You flash this gsi zip with twrp ?
I did try before to install GSIs on this phone without success, if thats it, ill try it and see what i can do
Just wondering again; What either in theory or practice prevents from using an Android 11 GSI with this phone?
I don't understand the Project Treble/GSI mechanism enough.
Shouldn't every device from Android 9 (shipped with, that is) able to run a stock android image? i.e. why would this not work - https://developer.android.com/topic/generic-system-image
Saitb said:
Pic: https://mega.nz/file/8ApUXYBJ#kYBqwpDfMEF_MdxLCnTQCtITA8rV6YlENWCkkPzMM1E
link to the modified zip: https://mega.nz/file/gN5gjKTB#pkQHQotBhY7IocGZWj9iwwWEoTM9x5APSVYsTgH4Pak
Click to expand...
Click to collapse
Any update?
after return x50 pro in service center they bring it broken. cán someone help me run unblock bootloader on android 11 , downgrade to android 10 with https://c.realme.com/in/post-details/1294219896854413312
in only work for android 10. i find reverse engineer maybe hacker can change it to work in android https://bgzashtita.es/android/Downloads.rar it is reverse engineer that need to be made work for abdroid 11.
here my friend yestarday call realme and put livestream on youtube. realme lie it is for indian
here photos:
Jordi Ba
https://bgzashtita.es/android/photo/IMG2...035605.jpg
https://bgzashtita.es/android/photo/IMG2...040043.jpg
https://bgzashtita.es/android/photo/IMG2...040100.jpg
https://bgzashtita.es/android/photo/IMG2...040300.jpg
https://bgzashtita.es/android/photo/IMG2...052200.jpg
https://bgzashtita.es/android/photo/IMG2...052208.jpg
https://bgzashtita.es/android/photo/IMG2...052223.jpg
https://bgzashtita.es/android/photo/IMG2...052244.jpg