Is their any way to get the mhl adaptor working with a component cable rather than HDMI? I have tried with an HDMI to component cable but this does not trigger the Sensation to turn on TV Output, only the HDMI cable triggers the TV output. Reason being that not all TV's have HDMI and i have a great idea to rig up the phone to my car stereo screen so i can view google maps, rather than balance my phone on the dash. Perhaps a hack exists to manually turn on TV Output?
Perhaps a way to manually turn on the TV out on the phone would force it to work?
No, HDMI = digital, component = analog, so you'll need another converter box after the mhl that not only converts digital to analog, but can seperate the signal into a component type output.
Sent from my HTC Sensation
Hello,
i have Skoda Rapid 2017, and i just buy Joying headunit (JY-VM130N2), with harness for skoda\vw 2016 2017.
when i plug the harness the backlight button of headunit turn on, and after min shutdown. when i start the car the headunit not turning on.
for testing i short acc with 12V and connect the headunit to power supply. the headunit turn on and seem to be ok.
i understand that the canbus adapter not supported by the car, there is something i can do to fix the problem??
i so that with the code 3368 i can change protocol for canbus adapter, there any chance this work?
thanks.
Make sure that 12V and ACC are not swapped in harness. I had once a harness where 12V and ACC were swapped in the ISO connector.
i test the harness with Circuit tester, when i turn on the car the canbus adapter not send signal to the headunit to turn on (no 12v on red wire).
i cut the red wire from the iso connector to canbus adapter, and connect it to the fusebox ( iso connector red > unused fuse socket that power after acc ).
now the headunit turn on, but i have problem with canbus notification and steering wheel remote control.
there is any solution to work with this canbus adapter? ( frimware update or something? )
RoNeReR said:
i test the harness with Circuit tester, when i turn on the car the canbus adapter not send signal to the headunit to turn on (no 12v on red wire).
i cut the red wire from the iso connector to canbus adapter, and connect it to the fusebox ( iso connector red > unused fuse socket that power after acc ).
Click to expand...
Click to collapse
12V and ACC come directly from the car harness and CANBUS Box does not switch them ON/OFF, those voltages have to be present with or without CANBUS Box.
12V: YELLOW Wire, 12V Always present
ACC: RED Wire, 12V present only when car ignition is ON
Check the ISO connector to have the 12V and ACC wires in the right connector position:
http://engrsajidrehman.com/pinouts/car-iso-connector-pinouts
Does anyone know of a way to run android phone audio through car android sterio (MTCD GS) without using bluetooth?
i've got a unit with perfect wifi, USB ports but no bluetooth (surprise surprise!)
While I work on that, looking for any way to link the phone to the stereo phone app over wifi or USB?
Thanks,
Richard.
Hi!
I am wondering if my new Dasaita 10.2'' PX6 unit as a CAN decoder built in as the pin layout has CAN_RX and CAN_TX.
Does anyone have experiences how to connect this to a car's CAN bus with high / low cables?
Cheers!
Is there a way to connect a bluetooth keyboard to the headunit to make it easier to type and work with the head unit? I a small portable bluetooth keyboard but I have no luck connecting it to the headunit.
https://www.amazon.com/XIWMIX-Ultra-Slim-Wireless-Bluetooth-Keyboard/dp/B081Z8JDYG/?_encoding=UTF8&pd_rd_w=xuLmx&pf_rd_p=5fe95cd4-8512-42fa-bf21-63d83b898785&pf_rd_r=CWGJY9RG8KQ4DXWJ6E03&pd_rd_r=3d98f09c-65e0-4b90-9257-e897b7834dff&pd_rd_wg=G0bGu&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1