I don't like the Test Point method, so You need: Twrp - this edition works: https://drive.google.com/drive/folders/1FoRLBMyQnL1B3lU8bZCqfGL7y_mkeJfk. You need to use HCU, part of the DC Unlocker software. The Magisk.zip needs to be placed in the tablet's folder on the SD card preferably. The tablet must be set to 'transfering files' and the Background Settings, USB port setting, obtained by using the dialler * # * # 2846579 # * # * or the calculator (I believe) for the WiFi version, to Manufacture Mode. So, with the tablet in the operational mode, not Fastboot or anything else, plug it in to the PC. Buy the time-limited mode for HCU and then log in to it. Press read phone info, give it a minute or so then press unlock, after the info states that it detects the phone. The Bootloader should be unlocked, not as in the Developer Mode/OEM Unlocked with USB Debugging selected, which are also necessary. Once you have unlocked with HCU, boot into Fastboot - vol down + power buttons. You should have the minimal ADB folder on the C: drive. Place the TWRP8.img in that folder.Navigate to the ADB folder in your command prompt, something like: CD\ then CD ADB. You should now be in the ADB folder. Type: fastboot flash recovery_ramdisk twrp8.img NOT fastboot flash recovery twrp8.img. Do a reset of the phone in Recovery Mode and it should then boot in TWRP. Flash the Magisk.zip with TWRP. Restart the tablet. You may have reset the tablet in Recovery Mode again to get the TWRP recovery working. You should now have root with Magisk after the tablet re-boots. I did not flash Disable DM Verity. (Earlier, I tried using Magisk to convert the ramdisk.img from the Update.App to gain root. I flashed it with Fastboot but it did not work, it ended in a boot-loop which I could not stop by any means.)
Related
I'm not tech savvy when it comes to Android and I need some help to root my teen's Motorola Moto E 2015, preferably today.
I need to root it to then disable the guest account, so that when I install the ScreenTime app my son can't bypass it by using the guest account. That's a shortcoming of ScreenTime.
I read a bit about ROMs and would like to use CyanogenMod.
But other than my choice of ROM, I haven't found what I believe to be reliable instructions on what to do now step by step. I really do need idiot-proof step by step instructions.
Is there a super Android geek here who has time to take me through the process or offer advice and links to such sources?
Hello,
Welcome to XDA.
Try the thread linked below, there is a YouTube video in the first post that walks you through rooting your device.
http://forum.xda-developers.com/moto-e-2015/general/root-moto-e-2015-t3086819
If you have further questions about your device, try posting your questions in the forum linked below.
http://forum.xda-developers.com/moto-e-2015/help
The experts there may be able to help. Good luck.
Got this far
Found instructions on CyanogenMod Wiki - wiki.cyanogenmod.org/w/Install_CM_for_surnia[/url
but only got as far as step 5. What terminal on my computer? Command Prompt? I typed adb reboot bootloader into Command Prompt but it said adb command is not recognized.
Unlocking the device
1. Make sure your computer has working fastboot and adb.
2. Enable USB debugging on the device.
3. Enable OEM unlock in the Developer options settings on the device. (Note: Not all devices have this setting, so continue with next step if yours does not.)
4. Connect the device to the computer through USB.
5. From a terminal on a computer, type the following to boot the device into fastboot mode:
adb reboot bootloader
6. Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
* If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine. See fastboot documentation for more info.
* If you see "no permissions fastboot", try running fastboot as root.
7. From the same terminal, type the following command to obtain your bootloader unlock code:
fastboot oem get_unlock_data
8. Visit the Motorola Bootloader Unlock website and follow the instructions there to obtain your unlock key and unlock your bootloader.
9. If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
10. Since the device resets completely, you will need to re-enable USB debugging on the device to continue.
Installing recovery using fastboot
See All About Recovery Images for more information about custom recoveries and their capabilities.
1. Make sure your computer has working fastboot and adb.
2. Download recovery -- you can directly download a recovery image using the link below, or visit twrp.me to obtain the latest version of TeamWin Recovery Project for your device.
Recovery: Downloadmd5: 5fdfe1871589c0a152f3f7e541b6c892
3. Connect the Moto E 2015 LTE to the computer via USB.
4. Make sure the fastboot binary is in your PATH or that you place the recovery image in the same directory as fastboot.
5. Open a terminal on your PC and reboot the device into fastboot mode by typing
adb reboot bootloaderor by using the hardware key combination for your device while it is powered off.
6. Once the device is in fastboot mode, verify your PC sees the device by typing
fastboot devices
* If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine. See fastboot documentation for more info.
* If you see "no permissions fastboot", make sure your UDEV rules are setup correctly.
7. Flash recovery onto your device by entering the following command:
fastboot flash recovery your_recovery_image.imgwhere the latter part is the filename of the recovery image.
8. Once the flash completes successfully, reboot the device into recovery to verify the installation. Boot to recovery instructions: Hold Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to recovery and then use Volume Up to select.
* Note: Some ROMs overwrite recovery at boot time so if you do not plan to immediately boot into recovery to install CyanogenMod, please be aware that this may overwrite your custom recovery with the stock one.
Installing CyanogenMod from recovery
1. Make sure your computer has working adb.
2. Download the CyanogenMod package for your device that you'd like to install to your computer.
Optional: Download 3rd party applications packages, like Google Apps which are necessary to download apps from Google Play.
3. Place the CyanogenMod .zip package, as well as any optional .zip packages, on the root of /sdcard:
* Using adb: adb push filename.zip /sdcard/
Note: You can copy the .zip packages to your device using any method you are familiar with. The adb method is used here because it is universal across all devices and works in both Android and recovery mode. If you are in recovery mode, you may need to ensure /sdcard (sometimes called Internal Storage) is mounted by checking its status in the Mounts menu. If you have booted regularly, USB debugging must be enabled.
4. If you are not already in recovery, boot to recovery mode now.
* Hold Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to recovery and then use Volume Up to select.
5. In Team Win Recovery Project, select menu choices by tapping on the appropriately labelled button.
6. Optional (Recommended): Select the Backup button to create a backup.
7. Select Wipe and then Factory Reset.
8. Select Install (if you're running Cyanogen recovery this is Apply Update).
9. Navigate to /sdcard and select the CyanogenMod .zip package.
10. Follow the on-screen notices to install the package.
11. Optional: Install any additional packages you wish using the same method (if you are installing multiple packages, install CyanogenMod the first and then install any subsequent packages on top of it).
12. Once installation has finished, return to the main menu and select Reboot, then System. The device will now boot into CyanogenMod.
ipzma said:
Found instructions on CyanogenMod Wiki - wiki.cyanogenmod.org/w/Install_CM_for_surnia[/url
but only got as far as step 5. What terminal on my computer? Command Prompt? I typed adb reboot bootloader into Command Prompt but it said adb command is not recognized.
Unlocking the device
1. Make sure your computer has working fastboot and adb.
2. Enable USB debugging on the device.
3. Enable OEM unlock in the Developer options settings on the device. (Note: Not all devices have this setting, so continue with next step if yours does not.)
4. Connect the device to the computer through USB.
5. From a terminal on a computer, type the following to boot the device into fastboot mode:
adb reboot bootloader
6. Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
* If you don't see your device serial number, and instead see "", fastboot is not configured properly on your machine. See fastboot documentation for more info.
* If you see "no permissions fastboot", try running fastboot as root.
7. From the same terminal, type the following command to obtain your bootloader unlock code:
fastboot oem get_unlock_data
8. Visit the Motorola Bootloader Unlock website and follow the instructions there to obtain your unlock key and unlock your bootloader.
9. If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
10. Since the device resets completely, you will need to re-enable USB debugging on the device to continue.
Installing recovery using fastboot
See All About Recovery Images for more information about custom recoveries and their capabilities.
1. Make sure your computer has working fastboot and adb.
2. Download recovery -- you can directly download a recovery image using the link below, or visit twrp.me to obtain the latest version of TeamWin Recovery Project for your device.
Recovery: Downloadmd5: 5fdfe1871589c0a152f3f7e541b6c892
3. Connect the Moto E 2015 LTE to the computer via USB.
4. Make sure the fastboot binary is in your PATH or that you place the recovery image in the same directory as fastboot.
5. Open a terminal on your PC and reboot the device into fastboot mode by typing
adb reboot bootloaderor by using the hardware key combination for your device while it is powered off.
6. Once the device is in fastboot mode, verify your PC sees the device by typing
fastboot devices
* If you don't see your device serial number, and instead see "", fastboot is not configured properly on your machine. See fastboot documentation for more info.
* If you see "no permissions fastboot", make sure your UDEV rules are setup correctly.
7. Flash recovery onto your device by entering the following command:
fastboot flash recovery your_recovery_image.imgwhere the latter part is the filename of the recovery image.
8. Once the flash completes successfully, reboot the device into recovery to verify the installation. Boot to recovery instructions: Hold Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to recovery and then use Volume Up to select.
* Note: Some ROMs overwrite recovery at boot time so if you do not plan to immediately boot into recovery to install CyanogenMod, please be aware that this may overwrite your custom recovery with the stock one.
Installing CyanogenMod from recovery
1. Make sure your computer has working adb.
2. Download the CyanogenMod package for your device that you'd like to install to your computer.
Optional: Download 3rd party applications packages, like Google Apps which are necessary to download apps from Google Play.
3. Place the CyanogenMod .zip package, as well as any optional .zip packages, on the root of /sdcard:
* Using adb: adb push filename.zip /sdcard/
Note: You can copy the .zip packages to your device using any method you are familiar with. The adb method is used here because it is universal across all devices and works in both Android and recovery mode. If you are in recovery mode, you may need to ensure /sdcard (sometimes called Internal Storage) is mounted by checking its status in the Mounts menu. If you have booted regularly, USB debugging must be enabled.
4. If you are not already in recovery, boot to recovery mode now.
* Hold Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to recovery and then use Volume Up to select.
5. In Team Win Recovery Project, select menu choices by tapping on the appropriately labelled button.
6. Optional (Recommended): Select the Backup button to create a backup.
7. Select Wipe and then Factory Reset.
8. Select Install (if you're running Cyanogen recovery this is Apply Update).
9. Navigate to /sdcard and select the CyanogenMod .zip package.
10. Follow the on-screen notices to install the package.
11. Optional: Install any additional packages you wish using the same method (if you are installing multiple packages, install CyanogenMod the first and then install any subsequent packages on top of it).
12. Once installation has finished, return to the main menu and select Reboot, then System. The device will now boot into CyanogenMod.
Click to expand...
Click to collapse
Have you installed the adb/fastboot program? Do a Google search for adb/fastboot for windows. Then verify that you have your moto E USB drivers downloaded and installed. You should be able to enter adb commands when that is set up. To verify that adb is working and that your device is recognized you type: adb devices
That should give you a set of numbers and letters, if so then your device is recognized, continue with the commands from your guide.
The YouTube video will walk you through step by step with a visual guide instead of trying to make sense of written instructions, just emulate the operators' actions following the video and you can't go wrong.
Sent from my SCH-I535 using Tapatalk
ipzma said:
Found instructions on CyanogenMod Wiki - wiki.cyanogenmod.org/w/Install_CM_for_surnia[/url
but only got as far as step 5. What terminal on my computer? Command Prompt? I typed adb reboot bootloader into Command Prompt but it said adb command is not recognized.
Unlocking the device
1. Make sure your computer has working fastboot and adb.
2. Enable USB debugging on the device.
3. Enable OEM unlock in the Developer options settings on the device. (Note: Not all devices have this setting, so continue with next step if yours does not.)
4. Connect the device to the computer through USB.
5. From a terminal on a computer, type the following to boot the device into fastboot mode:
adb reboot bootloader
6. Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
* If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine. See fastboot documentation for more info.
* If you see "no permissions fastboot", try running fastboot as root.
7. From the same terminal, type the following command to obtain your bootloader unlock code:
fastboot oem get_unlock_data
8. Visit the Motorola Bootloader Unlock website and follow the instructions there to obtain your unlock key and unlock your bootloader.
9. If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
10. Since the device resets completely, you will need to re-enable USB debugging on the device to continue.
Installing recovery using fastboot
See All About Recovery Images for more information about custom recoveries and their capabilities.
1. Make sure your computer has working fastboot and adb.
2. Download recovery -- you can directly download a recovery image using the link below, or visit twrp.me to obtain the latest version of TeamWin Recovery Project for your device.
Recovery: Downloadmd5: 5fdfe1871589c0a152f3f7e541b6c892
3. Connect the Moto E 2015 LTE to the computer via USB.
4. Make sure the fastboot binary is in your PATH or that you place the recovery image in the same directory as fastboot.
5. Open a terminal on your PC and reboot the device into fastboot mode by typing
adb reboot bootloaderor by using the hardware key combination for your device while it is powered off.
6. Once the device is in fastboot mode, verify your PC sees the device by typing
fastboot devices
* If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine. See fastboot documentation for more info.
* If you see "no permissions fastboot", make sure your UDEV rules are setup correctly.
7. Flash recovery onto your device by entering the following command:
fastboot flash recovery your_recovery_image.imgwhere the latter part is the filename of the recovery image.
8. Once the flash completes successfully, reboot the device into recovery to verify the installation. Boot to recovery instructions: Hold Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to recovery and then use Volume Up to select.
* Note: Some ROMs overwrite recovery at boot time so if you do not plan to immediately boot into recovery to install CyanogenMod, please be aware that this may overwrite your custom recovery with the stock one.
Installing CyanogenMod from recovery
1. Make sure your computer has working adb.
2. Download the CyanogenMod package for your device that you'd like to install to your computer.
Optional: Download 3rd party applications packages, like Google Apps which are necessary to download apps from Google Play.
3. Place the CyanogenMod .zip package, as well as any optional .zip packages, on the root of /sdcard:
* Using adb: adb push filename.zip /sdcard/
Note: You can copy the .zip packages to your device using any method you are familiar with. The adb method is used here because it is universal across all devices and works in both Android and recovery mode. If you are in recovery mode, you may need to ensure /sdcard (sometimes called Internal Storage) is mounted by checking its status in the Mounts menu. If you have booted regularly, USB debugging must be enabled.
4. If you are not already in recovery, boot to recovery mode now.
* Hold Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to recovery and then use Volume Up to select.
5. In Team Win Recovery Project, select menu choices by tapping on the appropriately labelled button.
6. Optional (Recommended): Select the Backup button to create a backup.
7. Select Wipe and then Factory Reset.
8. Select Install (if you're running Cyanogen recovery this is Apply Update).
9. Navigate to /sdcard and select the CyanogenMod .zip package.
10. Follow the on-screen notices to install the package.
11. Optional: Install any additional packages you wish using the same method (if you are installing multiple packages, install CyanogenMod the first and then install any subsequent packages on top of it).
12. Once installation has finished, return to the main menu and select Reboot, then System. The device will now boot into CyanogenMod.
Click to expand...
Click to collapse
Sorry, I meant to tell you that the command prompt is where you type your commands.
Sent from my SCH-I535 using Tapatalk
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Warning: Rooting does not void Yutopia’s warranty, though damaging your hardware (i.e., burning up your CPU/Motherboard by overclocking, hardbricking the device) will. You proceed at your own risk! I accept no responsibility for what you do with your phone. Follow the directions closely, and the odds are you will succeed without any trouble. If you are not sure what you are doing, do some more research before you try.
Lets begin
Index:
A. Drivers Installation
B. Unlock Bootloader
C. Install & Boot into Custom Recovery (TWRP) on Yutopia
D. Make A Nandroid Backup With TWRP Recovery
E. Root Your Stock Rom
F. Backup EFS and Other Partitions
A. Drivers Installation:
In order to Unlock, Root or Install Custom Recovery, you need to have the right set of Drivers to help your computer recognize your device. I used Windows 7 for this and it worked fine so should work for other windows as well.
Download and install Yutopia Drivers
https://drive.google.com/file/d/0B0pr-ZA5b-1pWFAwMmI4dWRGM3M/view?usp=sharing
Go through the setup, and when done, restart your PC. Connect your device to your windows and is shall recognize it
B. Unlock Bootloader:
Backup important files stored on your device before proceeding with the steps below, as unlocking the Bootloader will completely wipe/delete all files on the device.
After the installation of drivers follow the below to proceed with Unlocking the Bootloader of your Yutopia:
1. Enable USB Debugging, Uncheck Update Cyanogen Recovery & Activate OEM Unlock:
* Go to Settings > About phone, and then tap ‘Build number’ 7 times or until you get the message ‘You’re now a developer!’.
* Go back to Settings, choose ‘Developer options’. Find the ‘USB debugging’ option and use this toggle button to enable it. Accept warning by tapping on OK button.
In the ‘Developer options’. Find the ‘OEM Unlocking’ option and use its toggle button to enable it. It asks for your PIN/Screen unlock code, type it. Then accept the warning by tapping on OK button.
Also Uncheck Update Cyanogen recovery in developer options.
2. Boot your Yutopia into Bootloader/Fastboot mode. (Make sure you have backed up all important data as you’ll lose everything on phone in the steps below.)
3. Connect your Yutopia — in Bootloader mode — to PC. Let the driver install.
4. Open a command window on your PC. For this:
5. Open any folder on PC. Now, left click on empty white space inside the folder.
6. Hold shift key, right click on empty white space to get a pop-up and Choose Open command window here option from that. You will see a command window open up, with location directed to unlock folder.
7. Power off your phone then boot into fastboot mode (power + volume up).
8. Connect your phone to your windows via usb cable.
9. Confirm whether fastboot is working. With Yutopia connected to PC, run the following command in command window.
Code:
fastboot -i 0x2A96 devices
10. If device is connected you will get following kind of output:
86fsdy85 fastboot
11. If you dont get similar output it means that the drivers are not correctly installed or the device wasnt connected properly.
12. If the output is similar to above then run the following command:
Code:
fastboot -i 0x2A96 oem unlock
13. Now reboot from fastboot mode and thats it
Code:
fastboot -i 0x2A96 reboot
To confirm unlock status, reboot into bootloader/fastboot mode and you shall see the text unlocked now.
Code:
fastboot -i 0x2A96 device-info
C. Install & Boot into Custom Recovery (TWRP) on Yutopia
1. Download Modified TWRP:
https://drive.google.com/file/d/0B0pr-ZA5b-1pd2Z2YVR1cVZaeVE/view?usp=sharing
2. Enable USB debugging & Uncheck update Cyanogen Recovery from developer options once again.
3. Boot your Yutopia into bootloader mode.
4. Connect your Yutopia — in bootloader mode — to PC. Let the driver install.
Open a command window on your PC in the folder where you have the recovery.img file.
You will see a command window open up, with location directed to folder where you have the recovery.img file.
Let’s confirm whether fastboot is working. With Yutopia connected to PC, run the following command in command window. You should get a serial no. with fastboot written after it. If not, you need to reinstall the fastboot drivers from above.
Code:
fastboot -i 0x2A96 devices
(if the drivers are installed and device connected you would get the device serial number)
Flash TWRP recovery on your Yutopia by running the following command.
Code:
fastboot -i 0x2A96 flash recovery recovery.img
After that run this command:
Code:
fastboot -i 0x2A96 boot recovery.img
This will boot your device directly to TWRP
Or you can manually boot in recovery by unplugging the usb cable and then pressin POWER + VOL down until the device boots. When the YU logo shows up, relese the POWER and keep holding down VOL DOWN until TWRP boots up:
First boot into TWRP directly after flash is very important, Don't boot the OS on the phone as it may overwrite the recovery.
D. Make A Nandroid Backup With TWRP Recovery
Nandroid backup is a very important thing to have before installing any custom software on your device. It's basically a backup of your stock system that you can fall back on if anything goes wrong or if you just want your stock ROM back. You can also use the backup tool to create a backup of your favourite ROM set up exactly the way you like it. The backup you create can be easily restored using the restore tool in TWRP recovery.
All you need to do is enter TWRP recovery, select the backup option from the TWRP home screen, check the system/data/boot boxes, and swipe to backup. The process will take a few minutes.
Please make this backup before you root, so that you possess unrooted system backup at all times which would come handy at the time of OTA updates.
E. Root Your Stock Rom
Download: The latest SuperSU on your device.
https://download.chainfire.eu/896/SuperSU/BETA-SuperSU-v2.66-20160103015024.zip
Reboot to recovery
Tap on Install > Browse and Select SuperSU > Swipe to Confirm the Flash
Once Done > Wipe Dalvik & Cache > Reboot System To Restart
To Confirm the root status use a root checker app from play.
F. Backup EFS and Other Partitions
1. Download Partitions Backup And Restore App from Here
2. Open the app and grant it root access.
3. Click on the Settings icon above and select preference to .img
4. Select the partitions marked in yellow and backup them by clicking on the download like button at the bottom right.
5. Go to the storage and search for the Partitions Backup folder there you will three .img files (modem,modemst1,modemst2) . Save them to your cloud and as many places as you want as they are very important files.
This way you can back up all other partitions too. (I recommend backing up all those that are not found in a factory image.
Now you possess an Unlocked YU - Yutopia with a Custom Recovery and Root Privileges
Cheers,
Funk Wizard :good:
Reserved for updates !!
Do you have make video tutorial?
I am using windows 10, 64 bit. Thease drivers are not working for me.
Sent from my HM 1SW using XDA Forums Pro.
Nevermind.
Modified TWRP link is dead
Hello,
The modified twrp link is dead. Please share a new link.
Alternate Link for Yutopia Drivers
Hi,
Can you please share an updated link for the yutopia drivers? This link seems to be broken.
Thanks a lot!
Hi there!!
Well I was trying to root this phone since a month but due to lack of developers, it wasn't possible. So I tried and at last succeeded in rooting and porting TWRP recovery for Intex Aqua Music.
I tried to elaborate every step as much as I can so the tutorial becomes user friendly for everyone.
Disclaimer: Rooting immediately voids your phone's warranty, you should consider very carefully whether you need to gain root privileges. And this tutorial will format your phone. So backup you important files at the very first.
Tutorial
First download all the files which i left and the end of the thread and proceed with the tutorial.
First of all you need to install ADB Drivers.
Once drivers are installed, you need to enable USB Debugging in your phone.
(goto phone settings->About phone->scroll down and you’ll see an entry labelled ‘Build number.’ Keep on tapping till you see a prompt that says ‘You are now a developer)
Now in phone settings you will see a new option called Developer Options.
Now goto Developer Options and enable OEM Unlocking(for unlocking the bootloader so you can flash the TWRP recovery) and USB Debugging.
Now connect you phone with usb cable to computer and open the adb and fastboot folder which you downloaded.
Then open command prompt there(shift+right click) and type:
Code:
adb devices
You will see a popup on you phone screen, Select allow and ok
Now you will see your device listed there in command prompt.
Now type the following commands:
Code:
adb reboot bootloader
Phone will switch off and go into bootloader. Then type
Code:
fastboot oem unlock
Now you phone will ask for confirmation. Use Volume UP Button to select yes then type
Code:
fastboot continue
.
Now your device will reboot(it will take some time so don't worry)
Now once your phone boot up you will see its formatted and bootloader will be unlocked.
Now again goto setting and enable USB Debugging like before and connect you phone with pc.
Now copy the recovery.img from recovery zip which you downloaded to adb and fastboot folder.
Then in adb command prompt type the following commands like before
Code:
adb reboot bootloader
Wait for the phone to go into bootloader mode, then
Code:
fastboot flash recovery recovery.img
fastboot continue
Now twrp is flashed in your phone. Now to root your device copy the supersu zip to you phone.
Switch off your mobile, then press Volume Up + Power button together then choose recovery mode with Volume UP Button and
press Volume Down Button.
Now phone will boot into TWRP recovery mode.
Click Install and choose the Super Su zip from file manager then install it.
The click reboot and once your phone boots up its rooted now.
Enjoy!
Thanks button will be appreciated if the tutorial works for you.
Thanks
Thanks man, helpful
Recently, I successfully ported TWRP from Coolpad Note 3 Lite to Modena 2. After testing, everything works fine, on both devices. Since this device has locked bootloader, we need to bypass this by enabling fastmmi mode and factory mode to enable temporary root access and make initial backup and flashing. So, let´s get started.
Remember to read this post carefully. I am not resposible for any damage to your device. If you brick your device while flashing the TWRP you can *almost* always recover it using SP Flash Tool and YGDP Tool
IF YOU ACCIDENTALY BRICK YOUR DEVICE AND YOU WANT TO FLASH IT VIA SPFT, DO NOT FORMAT THE DEVICE IN SPFT!!! If you´ll format partitions in TWRP, that´s fine, but don´t do FORMAT ALL + DOWNLOAD or FIRMWARE UPGRADE! This will brick your device, like mine This tutorial will not (hopefully) brick it, but just in case something goes wrong, now you know what not to do.
Preparing the environment on your computer
Windows
Download ADB and Fastboot from this link
Open it
Install it system-wide
Also, install the drivers
GNU/Linux (Ubuntu / Debian based distros)
Open terminal
Type "sudo apt install adb fastboot libusb-dev" without the quotes (")
Other things, that are required
Since the file size of the recovery exceeds the maximum 8MB of allowed upload size, you can download it from DataFileHost.
Preparing the device
First, you need to remeber that this could render your device unbootable and will void warranty.
Enable developer options
Go to Settings -> About phone
Tap the build number 7 times
Go back
Go to Developer options
Make sure OEM unlocking and USB Debugging is enabled
Enabling factory mode
Open dialer app
Dial *#9527*#
Click on "DM"
You will be prompted to insert RD personnel password. Enter: 54321
Click cancel button
DM button should change colour to RED
Exit the app by clicking home button
Installing and setting up openrp app
Open terminal / command prompt
Type:
Code:
adb start-server
Type:
Code:
adb devices
Now, click on your phone allow debugging and make sure to tick the radiobutton to remember / always trust this computer
Type:
Code:
adb install
Press spacebar after the install word and drag and drop the downloaded openrp.apk file to terminal
Hit enter
After it´s done, type:
Code:
adb shell monkey -p com.yulong.openrp -v 500
Now, the fun part. ROOTING the device
But before that, BACKUP
Now, keep your phone plugged in, and do a normal reboot by pressing and holding the power button and clicking reboot
When it vibrates, press and hold the Volume down key (Vol-)
You will see these lines on the screen:
Code:
=>[Factory mode]
Code:
=>VolumeDown key is pressed
Code:
=>[fastmmi mode]
After that, you´ll see the LED turns green and "Up Down" text on the screen
Now, back to your computer, type in the command prompt
Code:
adb devices
You should see XXXXXXXXXXXXXX device listed (where XXXX... is the serial number)
Type in the command prompt:
Code:
adb shell dd if=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/recovery of=/storage/self/primary/stock_recovery.img
and
Code:
adb shell dd if=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/boot of=/storage/self/primary/stock_bootimg.img
Flashing the TWRP Image
Type in the command prompt:
Code:
adb push (drag and drop the recovery image file here, like you did with the openrp.apk file) /storage/self/primary/
Type:
Code:
adb reboot
Press and hold VolumeDown key (Vol-) to boot to fastmmi mode
Type:
Code:
adb shell dd if=/storage/self/primary/recovery_twrp_e502.img of=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/recovery
Type
Code:
adb reboot
Press and hold the VolumeUp key (Vol+) to boot into recovery. If you see white screen with "Recovery" text in it, congrats. Everything is working. If not, try again.
Flashing the SuperSU package
Download the zip from SuperSU website
Copy the zip over to the device, with TWRP running
In TWRP, click install, click the zip and confirm the installation.
Factory reset is not required, but you should at least wipe the cache
If this post was useful for you, hit the thanks button
RESERVED
Hi i have a problem here. at the part to drag and drop the openrp file. When i have downloaded the file a drag it and drop it after the install word. The problem is that if I want to drop it there it will do nothing, nothing there shows or anything. Please respond.
I guess you can type the path to the installation file instead of dragging.
Hello,
Very helpful thread, my coolpad Modena 2 (E502) is now rooted.
Don't forget to disable the factory mode once everything is done, or you won't be able to access the storage to usb anymore.
Thanks.
helo, can i get help, when i try to install openrp on abd and fastboot, it printed this message "Failure [INSTALL_FAILED_SHARED_USER_INCOMPATIBLE]"
can anyone help me on that step, so i can root my e502
TCRakt said:
Hello,
Very helpful thread, my coolpad Modena 2 (E502) is now rooted.
Don't forget to disable the factory mode once everything is done, or you won't be able to access the storage to usb anymore.
Thanks.
Click to expand...
Click to collapse
how to disable the factory mode ?? :crying:
Firefa23 said:
how to disable the factory mode ?? :crying:
Click to expand...
Click to collapse
Hello,
If I recall correctly (I don't have the phone anymore, just touched it once to root it at the time), you basically undo the "Enabling factory mode" step.
I think if you dial the number, you'll be back in the menu where you have the option to disable the factory mode.
Factory mode should be disabled when 'DM' is green.
Good luck
very good
Need Custom rom please
nougat / pie
Hello, could you resend the twrp recovery file for this phone again?. old links not work!.
(sorry for my bad english)
root infinix XOS 12 (Android 12)
Infinix Zero 5G Ant-Man and the Wasp: Quantumania Edition
Easy unlock
1. Enable developer options and turn on/allow OEM unlocking and enable USB debugging
2. Reboot to fastoot
Code:
Code:
adb reboot bootloader
3. Unlock bootloader via fastboot (you will be prompted to accept yes with volume up on phone.
Code:
fastboot flashing unlock
4. Setup and install MTK client Linux (fallow guide)
[GUIDE] [MTK] How to use MTKClient and set it up!
So most of you probably don't know what mtkclient is. It is basically an exploit which is used to boot any (mtk) phone into BROM mode (basically EDL for mtk) I am writing this guide especially for the RM6785 community. This tool is very useful...
forum.xda-developers.com
4. backup all partitions with MTKClient/MTKTool GUI (launch the mtk_GUI with su/root)
in mtk_GUI
Go to,
Read Partition(s) Tab and tick all boxes to be read/backup the partitions except data partition (internal storage)
Now you should have a backup of your files/.bin
5. copy boot_a.bin to your phone internal for magisk patching manually on phone
(Time of writing latest)
https://github.com/topjohnwu/Magisk/releases/download/v25.2/Magisk-v25.2.apk
6. Rename (magisk renames the default .bin)
patched_boot_a.img to patched_boot_a.bin
7. Copy patched boot_a back to your computer/home folder.
8. flashing.
From fresh started Android reboot to fastboot.
Code:
adb reboot bootloader
DO THE NEXT 2 STEPS AT THE SAME TIME IN FASTBOOT.
(Fastboot commands)
Code: terminal
Code:
fastboot flash boot_a /path/to/patched_boot_a.bin
Code2: (disable verity/secure boot) use vbmeta_a.bin that you backed up from you're phone.
Code:
fastboot --disable-verity --disable-verification flash vbmeta_a /path/to/vbmeta_a.bin
AFTER flashing above you should now have root
############## system r/w#############
If you want system R/W writable (full root) fallow next steps.
1. go to system r/w website and get this version tested here.
Official SYSTEM-RW v1.41 by lebigmac for Samsung Galaxy S23 Ultra and other devices
lebigmac's software
lebigmac
www.systemrw.com
Link to file above
11.21 MB file on MEGA
mega.nz
This must be run on the phone!
Step 1
Decompress (7zip) SYSTEM-RW_v1.41.zip to this directory on device. sysrw_1.41
Code:
/data/local/tmp
Step 2 in Android terminal type
Code:
Code:
su
cd /data/local/tmp/sysrw_1.41
chmod +x sysrw
./sysrw
This will build the new patched r/w super.bin in /data/local/tmp/sysrw_1.41/IMG
Use file explorer (fx-file explorer) to copy patched_super.bin to phones internal/storage and then copy to computer to flash with fastboot.
Step 3
Code:
On computer/PC with adb and fastboot flash super. (Should be around 8gb file)
Code:
Code:
sudo adb reboot bootloader
sudo fastboot flash super /path/to/patched_super.bin
sudo fastboot reboot
########################
Enjoy system r/w[/code]
Lposed
CPU Demensity 1080, can play most emulators (dolphin/athersx2) at 30-60 FPS,a really powerful gaming phone
Phone
Infinix Zero 5G Ant-Man and the Wasp Quantumania Edition
Any help please
Can elaborate this please. Im stuck at this step
Mtk-client has a user interface see photo
Step4 in mtk_GUI
Go to,
Read Partition(s) Tab and tick all boxes to be read/backup the partitions except data partition (internal storage)
Now you should have a backup of your files/.bin
Still can not change SELinux to permissive or install.... some madgisk modules..?? Assuming because the boot is reed only, wish system r/w worked on boot to as it contains the kennel..
Hi what version is your device? Is it v810? I was wondering if your device can boot into BROM mode.
Build number:
X6815C-H777A-S-GL-221010V451
Should work on
X6815
X6815B
And to get into BROM mode (to my understanding) on any mediatek CPU/phone simply power the device off with no USB connected...
Launch mtk_GUI with root, and it will ask to hold volume up or down while connecting the USB from a powered off state (try different button combinations)
Mtk _GUI is touchy!... with how it connects it usually takes me 2-3 attempts of rebooting and powering off my phone to get it connect/recognize in brom mode
(Might be worth noting)
If your Linux sysctl.conf has these security JIT settings
net.core.bpf_jit_harden=2
kernel.unprivileged_bpf_disabled=1
kernel.kexec_load_disabled=1
Or more...
mtk client will not recognize your devices... Simply move sysctrl.conf temporarily and reboot your Linux machine and try again
notreal456789 said:
Build number:
X6815C-H777A-S-GL-221010V451
Should work on
X6815
X6815B
And to get into BROM mode (to my understanding) on any mediatek CPU/phone simply power the device off with no USB connected...
Launch mtk_GUI with root, and it will ask to hold volume up or down while connecting the USB from a powered off state (try different button combinations)
Mtk _GUI is touchy!... with how it connects it usually takes me 2-3 attempts of rebooting and powering off my phone to get it connect/recognize in brom mode
(Might be worth noting)
If your Linux sysctl.conf has these security JIT settings
net.core.bpf_jit_harden=2
kernel.unprivileged_bpf_disabled=1
kernel.kexec_load_disabled=1
Or more...
mtk client will not recognize your devices... Simply move sysctrl.conf temporarily and reboot your Linux machine and try again
Click to expand...
Click to collapse
Damn sadly im on v810 now and it doesn't enter into BROM mode anymore or maybe am i doing something wrong but idk. I hope infinix will enable it again
Hnojohn said:
Damn sadly im on v810 now and it doesn't enter into BROM mode anymore or maybe am i doing something wrong but idk. I hope infinix will enable it again
Click to expand...
Click to collapse
This is why I don't update things, also it could be the setup Maby I'll post a Linux.iso with mtk client setup correctly
I still use Android apps from 2008 that still work on Android 12 fine