Hey guys, I was hoping if you can help me out a little. I have some basic coding experience C++ and python. I wanted to add signature spoofing to the OP7 pro, but can't seem to find any place that supports oxygen OS/android pie. This is only because I wanted to remove Gapps and replace them with MicroG and custom apps. Can any of point me in the right direction? My second issue is related to data use. When I use custom roms I can't seem to access my internet via data, however, when I connect to the wifi there doesn't seem to be any problem with it. If you guys have any solutions to this let me know. I was using Havos os or lineage on my OP 7 pro
18os13 said:
Hey guys, I was hoping if you can help me out a little. I have some basic coding experience C++ and python. I wanted to add signature spoofing to the OP7 pro, but can't seem to find any place that supports oxygen OS/android pie. This is only because I wanted to remove Gapps and replace them with MicroG and custom apps. Can any of point me in the right direction? My second issue is related to data use. When I use custom roms I can't seem to access my internet via data, however, when I connect to the wifi there doesn't seem to be any problem with it. If you guys have any solutions to this let me know. I was using Havos os or lineage on my OP 7 pro
Click to expand...
Click to collapse
Don't know anything about signature spoofing. But the cell data problem, sounds like you may need to enter the proper APN info for your carrier.
Hi guy’s,
I’m running a stock standard (not rooted) OnePlus 6 running Android 9.0.7. I have just upgraded from an old LG G2 running Android 5.0.2
I was wondering if any one can tell me if it is possible to copy a couple of LG apps from my old LG G2 phone to the new OnePlus 6.
I would really like to copy the Contacts, Messaging, File manager Phone & Gallery apps if it’s possible across to the new phone. I have tried to copy the *.apk files for some of these apps over to the phone using file manager and execute them but this fails. I have also used the same method to copy another app such as ZDNet as a test case and that works ok. I’m at a bit of a loss as to what to try next. Is this even possible & can anyone suggest anything ? I’m new to this so if you can keep any replies relatively simple I would appreciate it. I would really appreciate any help I can get, thank you.
c843861 said:
Hi guy’s,
I’m running a stock standard (not rooted) OnePlus 6 running Android 9.0.7. I have just upgraded from an old LG G2 running Android 5.0.2
I was wondering if any one can tell me if it is possible to copy a couple of LG apps from my old LG G2 phone to the new OnePlus 6.
I would really like to copy the Contacts, Messaging, File manager Phone & Gallery apps if it’s possible across to the new phone. I have tried to copy the *.apk files for some of these apps over to the phone using file manager and execute them but this fails. I have also used the same method to copy another app such as ZDNet as a test case and that works ok. I’m at a bit of a loss as to what to try next. Is this even possible & can anyone suggest anything ? I’m new to this so if you can keep any replies relatively simple I would appreciate it. I would really appreciate any help I can get, thank you.
Click to expand...
Click to collapse
The LG system apps may require there framework to run correctly. Try to download the newest version from Apkmirror and see if that will work.
Good day everybody,
A few questions about upgrading my pixel 3 from 9 to 10. To preface I have an unlocked bootloader and am rooted on the June 2019 version of android. I would like to update to android 10 and am wondering if one of my modifications to the build.prop would still work. I use the following modification for enabling hotspot:
net.tethering.noprovisioning=true
Can anybody confirm that this still works on Android 10?
Also, huge noob question - Where is the guide for updating from 9 -> 10 with root/unlock, and do I lose my data in the process? I can't seem to find anything but how to sideload monthly updates.
Thank you in advance for any help
To edit /system or /vendor you need to use magisk and do it systemlessly. A10 no longer allows you to directly modify these partitions. There is some discussion about exactly what you want to change under the guides section in the Pixel 3xl forum. For the second one, there is a guide somewhere in the guides section in this forum. You will need to do a full wipe with a version change. Look into different ways to back up your stuff before you switch. For apps and app data I did a twrp backup before switching then used titanium backup once on A10 to extract the app/data and restore it. For other stuff you might need to do it manually.
Follow this method for the Magisk based tethering modification:
https://forum.xda-developers.com/pixel-3-xl/how-to/how-to-native-tethering-rooted-pixel-3-t3858662
(Works on Pixel 3)
Hi,
I am happy to share my Framework-res mod, specific for Oneplus 7 with Openbeta firmware.
My work includes the following changes:
- Disabled keyboard switcher notification
- Disabled high volume warning
- Enabled burnin protection
- Changed battery notification low level from 15% to 10%
- Enabled 360° rotation
- Reduced navigation bar height from 48dp to 41dp
It is a magisk module and I want to repeat that it can only be used on Oneplus 7 with Openbeta firmware
I'm trying it and it doesn't seem to show any problems but I still recommend making a backup before trying it.
To remove the mod, simply uninstall the module using magisk manager or, if this is not usable, from recovery twrp, using the file manager deleting the module "Framework-res mods" that you find at the following path:
/data/adb/modules
My big thanks go to @Tulsadiver, for giving me the right tips to be able to make the mod and for passing me the VRThemer module, without His help I would not have been able to avoid the bootloop
P.S. If you want the mod for other firmware versions, please send me your framework-res.apk and I will prepare the specific module.
If you want to try making the mod yourself, check out the tutorial here
Flashing always at your own risk!!!
20th March 2020 - Added OnePlus 7 OpenBeta 11 specific module
Thanks for your work, My kernel is Kirisakura-Kernel. Can I use it?
foolo said:
Thanks for your work, My kernel is Kirisakura-Kernel. Can I use it?
Click to expand...
Click to collapse
It works with any oxygenos based software (it doesn't work with AOSP rom) regardless of the kernel used
Could you pass me the framework-res.apk of the stable version? I would also like to prepare the specific mod for OxygenOS stable version.
Thank you.
Thanks. Worked perfectly.
Added OnePlus 7 OpenBeta 12 specific module to the first post
This is the framework-res.apk for the stable 10.3.1 oxygen os oneplus 7. Could you make a version for this too? I could help with the testing. Thank you!
(Uploading drive link cause xda doesn' t allow upload of apk more than 20MB.)
https://drive.google.com/file/d/1OagIggcj_WUKcuOYQKOsUNYaCQaA04Ev/view?usp=drivesdk
neildalal said:
This is the framework-res.apk for the stable 10.3.1 oxygen os oneplus 7. Could you make a version for this too? I could help with the testing. Thank you!
Click to expand...
Click to collapse
Done!
Added OnePlus 7 Oxygen OS Stable 10.3.1 specific module to the first post
dianoandr said:
Done!
Added OnePlus 7 Oxygen OS Stable 10.3.1 specific module to the first post
Click to expand...
Click to collapse
Just flashed via magisk and works perfectly fine!
Thank you!!
Added OnePlus 7 OpenBeta 13 specific module to the first post
Added OnePlus 7 OpenBeta 14 specific module to the first post
Added OnePlus 7 OpenBeta 15 module to the first post
dianoandr said:
Added OnePlus 7 OpenBeta 15 module to the first post
Click to expand...
Click to collapse
Thanks for u hard work .
Can you make mod for stable 10.0.6Gm57BA EU version?
M.Kader said:
Thanks for u hard work .
Can you make mod for stable 10.0.6Gm57BA EU version?
Click to expand...
Click to collapse
Sure it is possible!
I need the stock framework-res.apk from 10.0.6Gm57BA firmware, If You or Someone else who uses this firmware extracts it and sends it to me, I create the specific firmware magisk module
Added to the first post the module for OnePlus 7 OpenBeta 16 firmware.
Hi there @dianoandr
I have been trying to modify my OP7T framework-res apk to edit the vibe pattern which is contained under arrays.xml in values folder. However I haven't had any luck since I have always ended in a bootloop and needing to delete module. Could u help me out?
Thanks!
miguelang611 said:
Hi there @dianoandr
I have been trying to modify my OP7T framework-res apk to edit the vibe pattern which is contained under arrays.xml in values folder. However I haven't had any luck since I have always ended in a bootloop and needing to delete module. Could u help me out?
Thanks!
Click to expand...
Click to collapse
Hi @miguelang611,
Probably the bootloop occurs because you directly use the modified apk that is created by "apk tool", also I had this problem, try to use my module replacing the contents of the folder "vrtheme \ system \ framework \ framework-res.apk " with your modified files, extract the contents of your modified apk and copy in the magisk module everything EXCEPT for the meta-inf folder and the android-manifest file.
Try this and update me.
Regards!
dianoandr said:
Hi @miguelang611,
Probably the bootloop occurs because you directly use the modified apk that is created by "apk tool", also I had this problem, try to use my module replacing the contents of the folder "vrtheme \ system \ framework \ framework-res.apk " with your modified files, extract the contents of your modified apk and copy in the magisk module everything EXCEPT for the meta-inf folder and the android-manifest file.
Try this and update me.
Regards!
Click to expand...
Click to collapse
Thank u dude
The Friday after lot of tests reached to same conclusion as yours: copy everything from TMA (what I used to decompile) and once I removed the meta-inf and manifest, boom, it worked!
However, unfortunately I couldn't manage to edit vibration on arrays, since changing values there made 0 difference to actual phone vibration.
Saw that under public.xml there are also some vibe pattern, but neither worked
At least I got a way of fully modifying the framework and still booting
Thanks!
miguelang611 said:
Thank u dude
The Friday after lot of tests reached to same conclusion as yours: copy everything from TMA (what I used to decompile) and once I removed the meta-inf and manifest, boom, it worked!
However, unfortunately I couldn't manage to edit vibration on arrays, since changing values there made 0 difference to actual phone vibration.
Saw that under public.xml there are also some vibe pattern, but neither worked
At least I got a way of fully modifying the framework and still booting
Thanks!
Click to expand...
Click to collapse
No problem, it was a pleasure
If I make no mistakes, the vibration patterns are also determined by the kernel, but honestly, I never went into that.
Regards!
dianoandr said:
No problem, it was a pleasure
If I make no mistakes, the vibration patterns are also determined by the kernel, but honestly, I never went into that.
Regards!
Click to expand...
Click to collapse
With kernel y can change intensity, but I wanna change duration (just as clock, SMS or calls do)
Not found yet though, still looking for the way to go
Thanks again!
Hi All!
I've recently got P40 Pro and I like it very much. Now I need some software to be installed - maps, chats, banking etc.
However almost all of these apps need Google services or HMS. I'll try to avoid using these frameworks by using MicroG and Aurora store.
My goal is to have some set of required apps and don't have bloatware (like Huawei AI apps).
So I also going to find browser, phone, file manager and others on F-droid and use them instead of pre-installed apps. And disable those via ADB.
There are tons of information I need to read to do that, and I'll surely will read.
BUT, most manuals have big disclaimer which says "Do everything on your own risk, you can brick the phone!". And that's what I definitely don't want to.
So my questions are - what is the set of safe operations? What predefined applications can be safely removed via ADB? How to make backup that will restore phone if something goes wrong?
I believe there should be some thread with same concerns, but I could not find it. If somebody could point me to it, I'll be very grateful! Thank you in advance!
The first and main thing is "Everything Do at your Own RISK" if you want to go through android modding or making changes in the system you should not fear from resetting or formatting the system first and other thing is that installation of any unstable or unsupported mod can brick your device to get recover from these situations you should have knowledge about adb and fastboot,oem unlock and bootloader,custom recovery,root,magisk and custom roms to get the full back of your android in current state needs root for root you have to unlock your bootloader and for unlocking bootloader you need fastboot tool or your device oficial bootloader unlocker tool then you can backup you droid by the most common tool titanium backup or simply by backu option in your custom recovery
I think having a fully capable ROM bootloader (EDL mode, MTK, Allwinner, RockChip...) is most important.
There are still times that your system is wedged and you'll need either ROM mode test points or flash disable.
That's when the boot chain is broken enough to not work, but not broken enough to be recognized as broken.
If things are totally broken it will go to ROM bootloader mode all by itself.
Thank you for your advises!
I could not find P40Pro in TWRP devices list, and AFAIK, to unlock bootloader it needs to be disassembled. Is that correct?
To get used to rooting, custom ROMs, flashing and things I'll better get some cheap used phone - this one is way pricey for savage experiments, especially when you're completely noob. So rooting isn't an option for me for now.
At the moment I 'm debloating phone with "adb shell pm disable-user" and following lists:
[GUIDE] EMUI 11 Complete Debloating Guide & Bloatware List
This de-bloating guide will help you start using EMUI 11 as clean as possible. Please list packages in the comments section that you know is a bloatware and I didn't include in the spreadsheet. This guide assumes that you're using Windows 10 as...
forum.xda-developers.com
P40 Pro debloating guide
Hey everyone, I've spent the last couples days going through all the installed packages, cross-referencing different debloating guides and testing my changes. I'm running the latest EMUI 10.1.0.158 (C636). RECOMMENDATIONS: if you can, follow...
forum.xda-developers.com
[GUIDE] List of bloatware on EMUI safe to remove
Hi all, i was working on a guide on the vast amount of packages that we find already installed on EMUI by default and safe to remove because i'm sure that it would be useful for users like me, users that doesn't like to have space occupied on...
forum.xda-developers.com
Next step - involve Android profiles to isolate spying apps, which I still need, from each other and from contact list
I also looking for decent replacement for buit-in file-management, phone, messaging and contacts apps. And, maybe, launcher, I don't know if it's needed and secure. So far I found:
Emerald Dialer | F-Droid - Free and Open Source Android App Repository
Make calls, view call log
f-droid.org
Silence | F-Droid - Free and Open Source Android App Repository
Encrypted SMS/MMS conversations made easy!
f-droid.org
Koler | F-Droid - Free and Open Source Android App Repository
uniquely stylized phone app with customizable features
f-droid.org
But haven't installed or tried yet. I'd gratefully accept recomendations for those app categories.
Dont waste your time. On this phones you cannot unlock the bootloader and definitely you cannot have access to the root. Also debloating is a non-sense: you can do more bad things than good things. The phone is powerful enough to not need debloating. It is not a Galaxy S2.