Database Info

Just flashes on startup. Black Screen

I got an HTC One S from a friend who got it from another friend. I don't have any history on the device. He gave it to me to fix because I'm the only Android user he knows and his phone won't start.
If I keep the power button pressed, the capacitive buttons flash exactly 15 times and occasionally the phone vibrates. I don't have a One S so not sure if that indicates that phone was started or shutdown.
Neither fastboot devices not adb devices shows the device. But every once in a while when it vibrates, if the phone is connected to the PC with a USB cable, it beeps - like it's connected. I don't see Android Phone in Device Manager. But I see a MTP USB Device with a yellow exclamation mark. Uninstalling and reinstalling HTC Drivers didn't fix the problem.
I have tried Power+Volume Down key. Shining a torch on it (seemed to work for a few people), keeping it plugged into the mains for 3 days, kept it in the freezer for 2-3 minutes (also seemed to work for one person).
I think when I first got the phone and plugged it into the mains, I saw a red charging light. But I may be mistaken. In any case, there is no light anymore indicating charging. But I don't think that's the problem.
I have no idea whether the device is bricked or not. And if there is any way to fix it. Samsung has Odin which makes any Samsung phone practically unbrickable. I haven't used any HTCs since the G1 so have not been in touch too much with the HTC development. But from reading, it seems that messing around with Romming with S-ON can cause the phone to be bricked. And perhaps that's what my friend or his friend did. Does this sound like that's what could have happened?
Thanks for any pointers.

I dont think the device is bricked. its just a little harder to press the power and volume down when you see the buttons flashing.
just check and do these steps.
connect the mobile to charger and see if the orange light comes and stays on
if the orange light is there, press the power button and keep your finger ready near the volume down button
you should keep the power button pressed and as soon as the orange light disappears you should press the volume down button until you end up in boot loader screen
give this a few tries and see if the device boots up in bootloader

ayyu3m said:
I dont think the device is bricked. its just a little harder to press the power and volume down when you see the buttons flashing.
just check and do these steps.
connect the mobile to charger and see if the orange light comes and stays on
if the orange light is there, press the power button and keep your finger ready near the volume down button
you should keep the power button pressed and as soon as the orange light disappears you should press the volume down button until you end up in boot loader screen
give this a few tries and see if the device boots up in bootloader
Click to expand...
Click to collapse
The problem is that I no longer see any light at all when I connect the phone to a charger. It's probably fully charged. Would that show a green light? If so, that's not visible either. I have a feeling that the bootloader has got wiped out or something.
I read in one post that the phone may be stuck in the QHUSB-DLOAD mode.
So I followed the steps in http://unlimited.io/qhsusbdload.htm. But that didn't help. I don't remember the exact statement since I was running an Ubuntu Live CD. But the gist was that it couldn't connect to the phone so presumably it's not stuck in QHUSB-DLOAD mode. Although the site states that it will NOT fix QHSUSB_DLOAD issues encountered by flashing ROMs - which may well be what may have happened.
I understand that running an RUU for the HTC One S may set it back to factory state. But for that I need fastboot to work.

Moto G XT1032 - Can access Fastboot, but it wouldn't work - Bricked?

Hi. First of all, thanks for taking the time to read this. I know it's a long post, I'm just trying to be as detailed as possible.
I've a Moto G XT-1032 that stopped working a couple days ago. It has the original battery, original software. It didn't came with an original charger, so I have been using a Samsung Galaxy Tab one. The phone is almost two years old.
This is how it all started: It had low battery. When I got home it connected itself to the wi fi, and tons of whatsapp messages came at the same time. It went off.
I thought maybe it had drained the battery. Plugged it in to charge, didn't get the led on, and the battery showed 0% for an instant. Then the phone turned itself on, got the M logo and then the screen went black (like... some sort of backlight is on, but the screen is just black)
I turn it off, and it goes back on. No battery image, straight to the M logo, and then black screen. I tried holding power + vol down keys for more than 120 secs, finger pain is the only I got. It can access fastboot mode, but doesn't matter which option I pick, normal powerup, recovery, factory... I select them and then press vol up, but it just goes to the white screen with the M logo, then black screen.
When I plug the charger, and go to fastboot mode, it doesn't show battery charging. Just says battery low (or battery ok). When I plug it to the computer via the usb cable, and access fastboot, it shows battery charging.
The computer doesn't detect the device at all. First time I plugged it, it tried to install drivers, but failed. I downloaded them from motorola's page.
If I open motorola device manager, it tells me there aren't updates for my phone... So... I guess it's recognizing it? But I still can't see it. Windows only shows me my C and D drives, but not the phone. Tried different usb cables, different usb ports. Nothing changes.
I sent it to a service, they tested the battery and charging port, they said those were fine. But didn't find the problem.
Any ideas? Suggestions?
Thanks in advance!

Dead GFlex2: get LG logo but no startup (or Recovery)

My LG G Flex 2 H950 was working fine, running google maps and playing music, plugged in to the car charger. Within minutes of leaving the car the phone was dead - I could not power it on. I can usually get it to show the LG logo by trying to start in Recovery Mode (holding the power and volume-down buttons for several seconds) but then the logo just disappears after a few seconds and the phone does not power on. But sometimes when I try this the red LED blinks on the phone screen and the logo may or may not appear. Sometimes (50%) when I plug the phone in to my Windows 10 desktop, the computer plays a tone to indicate a new device has been connected, but no icon appears in the list of hard drives or devices.
I think the battery is charging normally - when I connect the phone to a USB volt meter it usually (but not always) shows a normal amount of amperage flowing, and just now when I tried to start the phone it showed the battery charge icon on the phone screen (it doesn't usually do this) and showed 100% charge.
Is there anything else I can try, even if just to get the phone running long enough to backup my text messages etc?
Is there any way to test what's actually wrong? I'd hate to spend money on a new battery or charging port etc for a slim chance to temporarily fix a phone that seems like it's dying.
Thanks for any advice or suggestions...

Hey, i've got the same problem since today. i was watching youtube videos when the phone suddenly stopped working. did you already find the problem?
Sorry for my bad englisch ( Dutch)

No - not solved, phone still dead. Still would love to hear any advice...

I used to have the exact same problem as you - bootloops at the LG logo, no recovery etc. After some reading it seemed that the battery was the root of the problem, and after replacing the battery my phone was back to life - no issues ever since. I recommend you check if the battery is the issue by connecting it to a normal charger (i.e. not charging from a PC) and powering it on, by holding the power button at the battery charging screen. If it powers on normally then it's most likely a battery issue, which can be easily fixed. Cheers!

Honor 6 H60-L04 doesn't boot, only vibrates shortly without booting, is it bricked?

Hello there!
I tried to replace the battery of my phone with another one, but the phone doesn't boot up at all.
Shortly after I switched the battery, I managed to boot the phone: the HUAWEI writing showed up and then the phone shut down.
The red led was blinking while charging and other tentatives of boot-up failed with only a vibration shot and nothing more, with the screen still black.
Just out of curiosity, I tried to go to fastboot mode (by holding DOWN volume and plugging the USB cable on pc) and surprisingly enough the "plug in" Windows sound played but the phone remained pitch black.
The curious thing is that if I type
Code:
fastboot devices
It shows a number and the writing "fastboot" so I guess that the phone is recognized by the pc.
Is it bricked or something?
Or maybe the battery was faulty and ruined the motherboard?
Or maybe it is just the screen broken...
I don't really know how to proceed.

Oneplus 8T bricked after dying last night

Was watching youtube videos last night before my phone died, now I can't get it to start boot into the OS. Not sure if this is relevant but my power button had been a little finnicky- rather maybe not the power button itself because it doesn't feel stuck or anything at all but I noticed that it would take an extra second or two after pressing the power button to get into my lock screen. I never really paid attention because it only happened once in a while and I would just restart my phone and be done with it. However I can't even get into the lock screen or anything now.
After my phone died last night I plugged it in right away and came back a while later to turn it on. I tried turning it on but noticed my phone just kept rebooting. It's still repeatedly rebooting and I can only get in the fastboot menu by holding down both volume buttons when rebooting. I get the options power off- which just reboots it after a while, start - which just reboots the phone, restart boot loader- which literally takes me back to the same menu, recovery mode- just reboots and show barcode which shows the barcode at the bottom of the menu.
I've tried downloading the qualcomm driver and trying to get into EDL mode but don't see it on my pc or msmtool, i'm also not even sure if i'm trying to get into EDL mode correctly. I've tried disable Driver signature Enforcement and then redownloading the qualcomm driver but still no luck. I don't know what else I should try. Someone please help me out, i'm pissed this happened just because my phone died, about to have ptsd whenever my phone is at 5% fml.
Also after seeing the 1+ logo and powered by android on the bottom, sometimes I would see like a line of color, which I would assume is text not being rendered all the way, fade out and then the phone shuts down and reboots itself.

yellownese said:
Was watching youtube videos last night before my phone died, now I can't get it to start boot into the OS. Not sure if this is relevant but my power button had been a little finnicky- rather maybe not the power button itself because it doesn't feel stuck or anything at all but I noticed that it would take an extra second or two after pressing the power button to get into my lock screen. I never really paid attention because it only happened once in a while and I would just restart my phone and be done with it. However I can't even get into the lock screen or anything now.
After my phone died last night I plugged it in right away and came back a while later to turn it on. I tried turning it on but noticed my phone just kept rebooting. It's still repeatedly rebooting and I can only get in the fastboot menu by holding down both volume buttons when rebooting. I get the options power off- which just reboots it after a while, start - which just reboots the phone, restart boot loader- which literally takes me back to the same menu, recovery mode- just reboots and show barcode which shows the barcode at the bottom of the menu.
I've tried downloading the qualcomm driver and trying to get into EDL mode but don't see it on my pc or msmtool, i'm also not even sure if i'm trying to get into EDL mode correctly. I've tried disable Driver signature Enforcement and then redownloading the qualcomm driver but still no luck. I don't know what else I should try. Someone please help me out, i'm pissed this happened just because my phone died, about to have ptsd whenever my phone is at 5% fml.
Also after seeing the 1+ logo and powered by android on the bottom, sometimes I would see like a line of color, which I would assume is text not being rendered all the way, fade out and then the phone shuts down and reboots itself.
Click to expand...
Click to collapse
Which OOS build are you on? And your device is unlocked or not?

Getting into EDL mode is tricky. Power off device completely. With the device powered off, hold down volume up and volume up at the same time, keep them pressed all the time, and during that time plug into PC (phone all the time powered off). Still hold both of the buttons. By the time you plug into PC, you should be in EDL mode, BUT it only lasts about 10 seconds. I mean you have to click start in this 10 seconds time bracket, other way phone exits EDL itself. After you click start, you can release button, obviously