Related
My daughter's Nexus S touchscreen has died. It died slowly in that on the first few occasions she couild pop the battery and it would come back. Now it won't come back at all and is stuck on the pattern lock screen.
Before we send the phone for repair under warranty she is keen to get the photos off the phone since a repair might reset the phone. I was thinking we could mount the phone as a USB device but it doesn't show up perhaps because it won't until the pattern lock is entered else anybody could get data off your phone bypassing security.
Any other things we could try before giving up and hoping the repair doesn't delete all the data?
Thanks
Boot into recovery, make a nand then extract data through adb?
adb pull /sdcard/path-to-whatever
Can you explain the path to whatever? Like if I want it in folder "A" on the desktop.
Sent from my Galaxy Nexus using Tapatalk 2
Check this thread
http://forum.xda-developers.com/showthread.php?t=1573744
treUse said:
adb pull /sdcard/path-to-whatever
Click to expand...
Click to collapse
Out of interest I tried this on my GN. adb recognises the phone and adb devices shows the serial number. But adb pull /sdcard says invalid remote file. No idea what that means since using ES File Explorer sdcard is a valid directory on the phone (and I suppose it would also be on the Nexus S)
lchiu7 said:
Out of interest I tried this on my GN. adb recognises the phone and adb devices shows the serial number. But adb pull /sdcard says invalid remote file. No idea what that means since using ES File Explorer sdcard is a valid directory on the phone (and I suppose it would also be on the Nexus S)
Click to expand...
Click to collapse
ADB "thought" you meant to copy a file.
To copy the entire sdcard directory you should do something like this:
Code:
adb pull /sdcard/ sdcard/backup/on/pc/
The command parameters are "adb pull <source> <destination>"
Just make sure source ends with a /
Maybe a Windows based software?? Droid Explorer, very useful.. http://de.codeplex.com/ :good:
Well I finally got the phone to play with. The screen indeed dead. I installed the Google USB drivers from the SDK and also the Samsung drivers.
When I boot the phone into the recovery menu I can run fastboot devices and see the following
????0AC4B09900?? fastboot (of course the ? are not there but I wanted to anonmyuse the serial)
So far so good.
In device manager under Android Phone it show Samsung Android ADB Interface
But if I try adb devices I get nothing.
Forgot to mention my daughter said USB Debugging was turned off but I am not sure that makes any difference and anyway, we can't boot Android to turn it on
So I select Recovery and see the Android with the exclamation mark. Windows beeps to indicate that some sort of devices has been installed,
But in Device Manager no phone shows which explains why adb can't fidn the phone but not why.
I can bring up the recovery menu but still no adb
Any suggestions?
Thanks
Boot into Fastboot and flash CWM Recovery.
RL77LUC said:
Boot into Fastboot and flash CWM Recovery.
Click to expand...
Click to collapse
But it looks like I have to unlock the bootloader to do that and the phone is still under warranty so that would invalidate the warranty wouldn't it? She would like to get the data off the phone. A screen fix shouldn't zap the memory but you never know.
what this device installed CWM?? if installed cwm just bot it to cwm an goto mass storage
cukdus said:
what this device installed CWM?? if installed cwm just bot it to cwm an goto mass storage
Click to expand...
Click to collapse
The phone is stock
lchiu7 said:
The phone is stock
Click to expand...
Click to collapse
If you unlock the bootloader to flash CWM your memory will also be wiped, so you will loose all the photos you want to save, so don't do that.
Also if you have the USB debugging off, the ADB commands won't work. I'm afraid you're SOL, since you have the bootloader locked you can't flash a kernel with USB host, that would allow you to use a mouse to navigate in the phone and since you don't have USB debug you can't pull files from the "SDcard"... Better take it to the store and try to ask them if they can save the photos before they do anything to the phone, but i guess if it's a digitalizer problem, they won't mess with the NAND.
Check out http://www.moborobo.com/ and see if it works for you.
If you have root you have extended functionality, like control the device from the PC. But if i recall correctly, even without root you should be able to get your files.
**UPDATE**
NEW VERSION
THIS RELIES ON ADB COMMANDS, SO IF YOU DO NOT HAVE USB DEBUGGING TURNED ON, OR A CUSTOM RECOVERY TO BOOT TO, THEN IT WILL NOT BE AS SIMPLE AS JUST RUNING THE PROGRAM.
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
For anyone having issues...
If you had not previously activated USB Debugging, there are several steps you need to follow in order to enable ADB
SCREEN WORKING TOUCH BROKEN NO CUSTOM RECOVERYfirst, if you can see your screen, and have access to an otg cable, plug a mouse in to the otg cable, and the otg cable into the phone. Use the mouse to enable USB debugging, or to transfer files.
HOW TO ENABLE USB DEBUGGING
SCREEN WORKING TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN NO CUSTOM RECOVERYnow things get complicated...
*The following is paraphrased from this site
1. download the custom recovery image for your device. Copy the recovery image to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Note: The recovery image should have .img extension. If it is in a zip file, extract the .img file from it.
I recommend clockwork mod non touch from this page
2. Power your device off and reboot your device to FASTBOOT or DOWNLOAD MODE depending on which type of device you have.
(most devices are fastboot, SAMSUNG typically uses DOWNLOAD MODE)
how to boot to fastboot or download mode
[FASTBOOT]3. Connect your device to your computer via USB and wait till you see the PC recognize the device
to check if your device is in fastboot and connected use CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot devices
you will see a list of connected devices. if not, something went wrong.
4. Launch Command Prompt and type the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot flash recovery c:\recovery.img
5. Wait for the process to finish.
6. Turn device off then boot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
[RECOVERY MODE (SAMSUNG)]USE THE INSTRUCTIONS ON THIS PAGE
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
HOPEFULLY THIS HELPS. REMEMBER TO CHECK THE FORUM PAGE FOR YOUR DEVICE IF YOU RUN INTO ISSUES. THIS ISN'T ANYTHING THE MEMBERS OF XDA HAVEN'T DONE THOUSANDS OF TIMES OVER.
Don't forget to hit "Thanks"
i'll bump this thread for those who didn't see this amazing tool, this tool is really useful, thank you very much
Hi,
Sturggling to find the .adb file as my phone shows up as a "Portable Device" any ideas?
Cheers
Thank you!
I joined just to say thank you to FuzzyMeep Two. Thanks for an awesome tool! It worked better than advertised!
:good:
Thanks again!
-th3r3isnospoon
Question
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
koperkowy said:
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
Click to expand...
Click to collapse
Yes, when it references SD Card it means the internal "SD" storage built in to the phone, not the removable one. It should work as long as ADB can connect.
Sorry for taking so long to reply, i really hope you got your pictures back.
FuzzyMeep Two said:
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
P.S. I apologize if i have posted this in the wrong place, if so please let me know.
Click to expand...
Click to collapse
Really great stuff - so simple but so effective. Cheers and thanks.
Error msg
zobes said:
Really great stuff - so simple but so effective. Cheers and thanks.
Click to expand...
Click to collapse
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
alisdairjk said:
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
Click to expand...
Click to collapse
NEW VERSION
Try this, i haven't gotten to test it, so please let me know if it worked for you, I added the option of selecting an emulator or USB device, because of your post. Hopefully it helps.
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Joeb29 said:
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Click to expand...
Click to collapse
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
joffmeister said:
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
Click to expand...
Click to collapse
I have the same situation right now. Managed to make your program work then I get the "error:device not found". My phone does show up in the computer folder(albeit not in mass storage mode), but isn't that what this program was made to work around?
My phone is a LG Optimus G with a smashed glass... The LCD still displays fine, but I'm stuck at my swipe lock because the digitizer is dead.
Thank you for your help and your wonderful program.
Thanks for this app. My girlfriend broke her screen and digitizer on her Galaxy S4. She never turned USB Debugging mode and has a lock on her screen. When using your app I get the same error when I use adb by itself which is "error: closed". ADB detects my phone but any command I use in ADB or with your app I get that same error.
Do you know how to fix this? Thanks in advance.
Thanks a lot man.
dude this tool is just amazing and does exactly what it promised. I was spending sleepless nights thinking about how to recover my data from my broken galaxy nexus and now that I have it I can rest easy. Seriously can't thank you enough for this. Just joined xda to thank you buddy.:laugh::fingers-crossed:
Getting an error "The system cannot find the path specified."
I start the recovery tool, set eh adb path successfully, and then I get this error. If I try running the recovery to pull the DCIM library I get this:
"error: device not found"
What can I do?
Thanks!
Either way this is an amazing tool, seeing how it helped some people already. :good:
Hi, Seem to have the same problem as many others, Device not found. I cant change to MTP mode on my LG G2.
I hope someone can find a solution to this problem.
Program seems amazing doh.
Hello,
This is really a great tool ! I was wondering if you could add the possibility to recover the external sd card aswell.
Device not found
Tried to recover a Samsung Galaxy S3 mini with a broken screen
I installed adb and RecoverData, run it and then get a "device not found error"
What can I do?
Amazing app. thank you so much :good:
FuzzyMeep Two said:
**UPDATE**
NEW VERSION
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
Don't forget to hit "Thanks"
Click to expand...
Click to collapse
Hi, Thank you very musch, It's so usefull for me.. :angel:
Hi, I've got an old S5 with a broken screen. There's no image going on and there's no indication that the touchscreen is working.
I'm not looking to recover data, I'm looking to play around with it by controlling it from my PC. Last I remember, the phone is running a Cyanogenmod OS (I don't think LineageOS was around at that time) with either TWRP or CWM recovery, but I'd bet on TWRP.
Now: the device reaches the OS properly, I can tell because if I try to turn the ringing sound up it gives me an audio feedback.
If I connect it to a PC from the OS:
- the phone shows up in Windows Explorer as "SM-G900F"
- Device Manager shows me a "SAMSUNG Mobile USB Composite Device" under Universal Serial Bus controllers
However I cannot access any files (Windows Explorer shows the device as empty), and if I attempt to 'adb devices' in the console it shows me an empty devices list.
Now, I suspect that USB debugging might be off. So I also tried connecting it to a PC from recovery and the exact same thing as above can be observed, PLUS:
- Device manager also shows me a "SAMSUNG Android Phone" list which can be expanded to show me one entry called "SAMSUNG Android ADB Interface"
However it's the same as before, no files available and 'adb devices' shows an empty list.
Now I heard that I can theoretically enable USB debugging through ADB, by writing to a config file. That would allow me to enable USB debugging and try something like Vysor in order to control the phone from my PC.
However that's a moot point until I can figure out why the ADB service on my PC isn't seeing the device. Any help would be greatly appreciated, and if you need more info I can provide it.
Extra info:
- I installed Samsung USB drivers at some point while trying to make it work
- Windows Explorer shows a phone icon for this device, and if I recall correctly that's what happens when it's connected through MTP (Mass Storage should show it like a memory card)
_sepiroth said:
Hi, I've got an old S5 with a broken screen..........
Click to expand...
Click to collapse
I've never experienced this situation myself but, I've seen that the following thread has worked for many individuals.
https://forum.xda-developers.com/showthread.php?t=2786395
Good Luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Apple Macintosh.
Ibuprophen said:
I've never experienced this situation myself but, I've seen that the following thread has worked for many individuals.
https://forum.xda-developers.com/showthread.php?t=2786395
Good Luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Apple Macintosh.
Click to expand...
Click to collapse
Thanks a bunch, that pointed me in the right direction with my research! I solved my issue, I can now control my phone from my PC.
By doing this I ran into a couple of problems, I'm going to describe them and their solutions:
Problem 1: couldn't ADB into the device when in Recovery Mode. That is because after a long head scratching session I came to the conclusion that I didn't have TWRP Recovery installed (I had Philz Touch CWM Recovery and LineageOS 14.1 instead).
Solution 1: ADB mode is enabled in TWRP by default. So I flashed the latest TWRP through Odin, ADB instantly started working afterwards in Recovery Mode.
Problem 2: USB Debugging was disabled inside the OS.
Solution 2: from the thread that Ibuprophen posted, you can enable USB debugging in your OS by opening an ADB shell into your device and modify the build.prop like so
Code:
Adb shell
echo "persist.service.adb.enable=1" >>/system/build.prop
echo "persist.service.debuggable=1" >>/system/build.prop
echo "persist.sys.usb.config=mass_storage,adb" >>/system/build.prop
reboot
Problem 3: /system was empty so there was no build.prop. If I attempted to create a build.prop file it wouldn't be saved after a device reboot, so USB debugging still didn't work.
Solution 3: it seems like TWRP doesn't mount /system by default, only /data. You can mount it manually through ADB like this:
Code:
mount -o rw /dev/block/bootdevice/by-name/system /system
I found this out from this stackexchange question: https://android.stackexchange.com/q...data-partitions-in-recovery-mode-in-adb-shell
Problem 4: When an app tries to use USB Debugging you need to allow it to do so from the phone. Since the screen was broken, I couldn't do this.
Solution 4: You'll need to push a public key to your device with ADB. Boot into Recovery Mode and make sure your device is recognized by your PC and type
Code:
adb push <path to adbkey.pub on your PC> /data/misc/adb/adb_keys
This solution is from: https://stackoverflow.com/questions...b-rsa-key-with-broken-touch-screen-on-android
This will make sure that you won't need to confirm debugging permissions for apps coming from your machine.
So for anyone who has a broken phone screen (my screen is dead and touchscreen/touch buttons are kaput too) and wishes to control their phone from their PC but USB debugging is disabled:
1. Boot device in TWRP Recovery (flash it if you don't have it)
2. ADB into the device
3. Make sure /system is mounted (if it's empty it means it's not mounted), else mount it manually like in Solution 3
4. Configure build.prop to have USB Debugging enabled like in Solution 2
5. Push your public key to the device like in Solution 4
6. Restart the phone (into its OS)
7. Download the Chrome extension called Vysor and launch it
8. Connect your phone through a USB cable
9. The device should appear in Vysor, connect to it and have fun controlling it
Note that if you just want to backup your files, steps 1 + 2 are sufficient. After making sure ADB works you can just 'adb pull' all your files which should be located in /sdcard. Google it, it's easy to find.
The same goes for backups, you can do them directly through ADB.
Again, thanks Ibuprophen!
Vysor does not work on all graphic cards. a good free alternative is scrcpy
btw instead of flashing twrp, you can flash a modified system partition with proper entries in build.prop (for those with no custom recovery available)
aIecxs said:
Vysor does not work on all graphic cards. a good free alternative is scrcpy
btw instead of flashing twrp, you can flash a modified system partition with proper entries in build.prop (for those with no custom recovery available)
Click to expand...
Click to collapse
Very well pointed out, thanks for this.
Hi,
I think I've already explain everything in title.
My Galaxy S5 on Android 8 (I think) as her screen broken (black)
Before that it already wokr badly and slowly. I bought a new phone but this one break just before I can transfer data.
I can unlock the patern (I know that because the volume + buton react)
Smart switch say that the phone is locked (even it's not true). Tested on 2 PC
The phone appear in Windows but no file or folder appear.
In adb the device is shown unauthorised and even if I click where the message to unlock should be, notihng append.
The phone is connected on Wifi, apparear in Google Find it but not Samsung find it...
I think that it's already to much information...
My question : how can I do the unlock the phone and do a smart switch backup ? or an other way to transfer data.
Regards
James
The Samsung Galaxy S10 comes with a USB OTG adapter. OTG stands for "On the Go" and is used for the connection between smartphone and USB stick / cable. Connect this USB OTG adapter to the USB Type C port of your Samsung, then connect the USB OTG adapter with USB Type C port of your computer.
You should see the data stored on your Samsung.
jwoegerbauer said:
The Samsung Galaxy S10 comes with a USB OTG adapter. OTG stands for "On the Go" and is used for the connection between smartphone and USB stick / cable. Connect this USB OTG adapter to the USB Type C port of your Samsung, then connect the USB OTG adapter with USB Type C port of your computer.
You should see the data stored on your Samsung.
Click to expand...
Click to collapse
It's an S5. But I have a OTG adaptor for it but my new phone A52s doesn't connect to the S5.
I try with a S7 but I can see that there is a lot autorisation to give on the old phone which will be very hard to do with a black screen.
If ADB is unauthorized, the only way to back up any data would be via a custom recovery. That would require that the device have an unlocked bootloader though
iBowToAndroid said:
If ADB is unauthorized, the only way to back up any data would be via a custom recovery. That would require that the device have an unlocked bootloader though
Click to expand...
Click to collapse
ADB authorised is not require for Smart Switch... I think
And my device have access to recovery and it's root so the bootloader is unlocked.
jameslevalaisan said:
ADB authorised is not require for Smart Switch... I think
And my device have access to recovery and it's root so the bootloader is unlocked.
Click to expand...
Click to collapse
So then flash a custom recovery, and then enter it. That will either give you MTP access to the files and folders, or ADB should also be enabled - and does not require authorization
iBowToAndroid said:
So then flash a custom recovery, and then enter it. That will either give you MTP access to the files and folders, or ADB should also be enabled - and does not require authorization
Click to expand...
Click to collapse
purehaps you have forget that the screen is broken. I can't access the phone for complicated manipulation. I'have already have TWRP installed on it but without a view it's impossible to manipulate it. Also, it's not normal that the phone are not viewed on windows or is shown locked on smart switch.
In recovery mode, the phone isn't show on windows also. Find the MTP option in TWRP without a screen view is very diffucult and dangerous, (the wipe option are near)
If I can access file on phone I will be able to view screenshot and configure it.
jameslevalaisan said:
purehaps you have forget that the screen is broken. I can't access the phone for complicated manipulation. I'have already have TWRP installed on it but without a view it's impossible to manipulate it. Also, it's not normal that the phone are not viewed on windows or is shown locked on smart switch.
In recovery mode, the phone isn't show on windows also. Find the MTP option in TWRP without a screen view is very diffucult and dangerous, (the wipe option are near)
If I can access file on phone I will be able to view screenshot and configure it.
Click to expand...
Click to collapse
1. No, I didn't forget that the screen is broken
2. I wasn't telling you to press anything in TWRP. When it's in TWRP and you plug it in, you will either get MTP and/or ADB access automatically
3. Yes, it is perfectly normal to not have access to the files and folders in Windows, when it's powered on normally. There's a popup on the phone that you have to tap in order to grant permission to the folders and files. That's why it shows up as an empty device when you plug it in while in normal mode
iBowToAndroid said:
1. No, I didn't forget that the screen is broken
2. I wasn't telling you to press anything in TWRP. When it's in TWRP and you plug it in, you will either get MTP and/or ADB access automatically
3. Yes, it is perfectly normal to not have access to the files and folders in Windows, when it's powered on normally. There's a popup on the phone that you have to tap in order to grant permission to the folders and files. That's why it shows up as an empty device when you plug it in while in normal mode
Click to expand...
Click to collapse
Ok excuse me.
Hum when I'm in recovery mode, my phone doesn't appear in Widows. And in adb, I haven't access to all folder. Data is empty for exemple.
For 3. Ok, I don't remember this notification. But I'm shure that I'have already use this phone with my PC. If I wasn't able to ring it on Whastapp, I will think that the phone doesn't works anymore at all. But it's not the case.
jameslevalaisan said:
purehaps you have forget that the screen is broken. I can't access the phone for complicated manipulation. I'have already have TWRP installed on it but without a view it's impossible to manipulate it. Also, it's not normal that the phone are not viewed on windows or is shown locked on smart switch.
In recovery mode, the phone isn't show on windows also. Find the MTP option in TWRP without a screen view is very diffucult and dangerous, (the wipe option are near)
If I can access file on phone I will be able to view screenshot and configure it.
Click to expand...
Click to collapse
ADB commands work by default while in TWRP, you can back up almost anything that your TWRP version allows through your PC using ADB commands, TWRP will serve as intermediary, but you will not go to operate over your broken screen device but through your ADB/fastboot CMD.
In normal mode I can unlock the phone but after that even if I click where the message should appear it doesn't do anything.
In adb I can't access a backup command (and if I can do this, It will not the easyer way to transfer my sms.)
I have some old other phones to see some message exemple and know where to clic but it doesn't works. I have install Vyzor, It asks me a permission but even if I tap in the right of the screen the permission doesn't works.
I also try to transfert a new adb key but I think it doesn't work because Wyzor still ask permission.
jameslevalaisan said:
In normal mode I can unlock the phone but after that even if I click where the message should appear it doesn't do anything.
In adb I can't access a backup command (and if I can do this, It will not the easyer way to transfer my sms.)
Click to expand...
Click to collapse
There is no backup command in ADB that you can use. And the reason that you can't access /data is because that requires going into TWRP settings and mounting the system partition.
What you can do in TWRP is to adb pull all of the files and folders off of the internal storage
Other thing, I can phone my phone with Whatsapp but I can't click to hang off.
iBowToAndroid said:
There is no backup command in ADB that you can use. And the reason that you can't access /data is because that requires going into TWRP settings and mounting the system partition.
What you can do in TWRP is to adb pull all of the files and folders off of the internal storage
Click to expand...
Click to collapse
ok to do have a exemple of command to tap ?
And there no way to just be able to connect my phone with smart switch on windows ?
jameslevalaisan said:
I have some old other phones to see some message exemple and know where to clic but it doesn't works. I have install Vyzor, It asks me a permission but even if I tap in the right of the screen the permission doesn't works.
I also try to transfert a new adb key but I think it doesn't work because Wyzor still ask permission.
Click to expand...
Click to collapse
ADB backup is not to operate while your device is on, but it is to operate while your device is in TWRP mode.
TWRP has integrated by default the ADB options not need to authorize through your broken screen because it is already authorized.
Messages as an app user (the same with root or system user) is part of userdata, you want to back up userdata to restore it after in other device or a scenery where your device get repaired, no?
I'll give you an example, you have to use this command, create a folder on a convenient place onto your PC directory, something like "BACKUP", assuming that you set it up correctly the environment for ADB/fastboot to use it along all of your system, you should open from this newly created folder an CMD (I use the new Windows terminal for easy/comfortable results) then type from the terminal adb shell twrp backup userdata , you'll have the userdata backed up in your PC in less of 2 minutes depending on the size of the partition, and so on successively.
What you can back up from TWRP depends on the restrictions from your TWRP version, you should back up the normal that you can see from the TWRP screen and even more but for example if your TWRP have some issues mounting vendor partition of course the ADB commands can't do the job for this specific partition, but anyway you have a lot you can do through it.
jameslevalaisan said:
ok to do have a exemple of command to tap ?
And there no way to just be able to connect my phone with smart switch on windows ?
Click to expand...
Click to collapse
1. The command depends on what the mount point for your internal storage is. The command would be "adb pull /(mount point)" , so it could be:
adb pull /sdcard
adb pull /storage0/sdcard
Or several others
2. No, you can't connect with Smart Switch without allowing permission on the popup box on the phone screen
Hi guys,
I'm very happy to find here some people to help me. thank you a lot. I just now in recovery mode.
here is some result of command
Code:
adb devices
List of devices attached
487e969e recovery
adb root
adbd is already running as root
adb shell
~ # ls
cache init.recovery.qcom.rc selinux_version
charger init.recovery.service.rc sepolicy
data init.recovery.usb.rc service_contexts
default.prop license sideload
dev oem sys
etc prebuilt_file_contexts system
file_contexts proc tmp
fstab.qcom property_contexts twres
init res ueventd.qcom.rc
init.rc root ueventd.rc
init.recovery.hlthchrg.rc sbin vendor
init.recovery.nano.rc seapp_contexts
~ #
as you can see there is not storage in the ls result
Code:
~ # ls /res
images keys
~ # ls /data
~ # ls /data
Code:
adb pull /data/data/com.android.providers.telephony/databases/mmssms.db ./
adb: error: remote object '/data/data/com.android.providers.telephony/databases/mmssms.db' does not exist
Is there something inspired you ?
iBowToAndroid said:
1. The command depends on what the mount point for your internal storage is. The command would be "adb pull /(mount point)" , so it could be:
adb pull /sdcard
adb pull /storage0/sdcard
Or several others
2. No, you can't connect with Smart Switch without allowing permission on the popup box on the phone screen
Click to expand...
Click to collapse
1. the ls command doesn't show any sdcard or storage
2. Ok bit wyh I can't click on the permission popup ?
SubwayChamp said:
ADB backup is not to operate while your device is on, but it is to operate while your device is in TWRP mode.
TWRP has integrated by default the ADB options not need to authorize through your broken screen because it is already authorized.
Messages as an app user (the same with root or system user) is part of userdata, you want to back up userdata to restore it after in other device or a scenery where your device get repaired, no?
I'll give you an example, you have to use this command, create a folder on a convenient place onto your PC directory, something like "BACKUP", assuming that you set it up correctly the environment for ADB/fastboot to use it along all of your system, you should open from this newly created folder an CMD (I use the new Windows terminal for easy/comfortable results) then type from the terminal adb shell twrp backup userdata , you'll have the userdata backed up in your PC in less of 2 minutes depending on the size of the partition, and so on successively.
What you can back up from TWRP depends on the restrictions from your TWRP version, you should back up the normal that you can see from the TWRP screen and even more but for example if your TWRP have some issues mounting vendor partition of course the ADB commands can't do the job for this specific partition, but anyway you have a lot you can do through it.
Click to expand...
Click to collapse
I try this...
C:\Users\James-23\AppData\Local\Android\Sdk\platform-tools>adb shell twrp backup userdata
TWRP does not appear to be running. Waiting for TWRP to start . . .
Press CTRL + C to quit.
^C
C:\Users\James-23\AppData\Local\Android\Sdk\platform-tools>adb shell twrp plat-form-tools userdata
TWRP does not appear to be running. Waiting for TWRP to start . . .
Press CTRL + C to quit.
^C
I'm not sure I understand your command. But it return a result. "Backup" is the name of a folder ? or it's a commande for twrp ?
Is there a way to be sure that twrp is installed (with all my phone, sometime, I don't remember what is on it. The thing it's sure it that this phone is root because I use root function with some app but perhaps just with magisk or Super SU.
So I had a pixel 6 pro and unfortunately my wife got mad and threw it against the wall a few times, causing the frame to bend and entire back glass to shatter. The front LCD didn't break, but glue came apart and it separated from the frame.
I had all my 2fa accounts on there, as well as very valuable data that I need to recover.
The phone still powers on, but there's nothing visible on the screen. A local repair shop advised we start by replacing the screen and then work on transferring everything out.
I have a replacement pixel 4a and want to be prepared for when my phone comes back online.
What's the best way to backup my 6 pro and restore on the 4a?
I need everything copied as a whole image, and restored on the 4a. I want to be able to boot up my 4a, open my authenticator app, and have all my accounts listed there.
Someone please tell me this is possible, and if so, please post instructions.
Thank you in advance.
I doubt 1:1 image cloning is possible because encryption is hardware-backed and therefore device-unique. it's not even possible to restore backup on origin device after factory reset since android apps can use keystore in TEE.
side note: you could connect HDMI multiport usb-c otg adapter to TV and mouse so you have access to phone at least
aIecxs said:
I doubt 1:1 image cloning is possible because encryption is hardware-backed and therefore device-unique. it's not even possible to restore backup on origin device after factory reset since android apps can use keystore in TEE.
side note: you could connect HDMI multiport usb-c otg adapter to TV and mouse so you have access to phone at least
Click to expand...
Click to collapse
The HDMI multiport didn't work. Nothing was displayed. I don't know if it's because my phone is badly damaged, or if the pixel 6 doesn't support HDMI out over USB C
I tried this one https://www.amazon.com/dp/B081VBSNRZ/ref=cm_sw_r_apan_i_5NF5RPBKZ97YW4KFW9AX
What are my other options?
the best option would be previously unlocked bootloader, so you can have full access. but you did not unlock bootloader so this is no option for you, because unlocking will factory reset device.
HDMI might require some setting or app installed on device. apps can installed remotely from PC google play with proper google play account. not sure how to start an app though, but guess app can autostart.
at least usb keyboard is working, you could try to navigate blind and enable usb-debugging, this would allow you to use scrcpy. maybe connect headphones or use talkback to get some kind of audio feedback.
of course both methods requires some information from another identical device and need to tested on fully functional pixel 6 pro before..
some (not) useful apps
https://forum.xda-developers.com/t/i-broke-my-screen-and-digitizer.4436261/#post-86791963
https://forum.xda-developers.com/t/broke-the-display-of-my-phone.4424413/#post-86676229
https://forum.xda-developers.com/t/...asily-manage-multiple-android-devices.2707556
Anyone else have suggestions?
AcuraKidd said:
Anyone else have suggestions?
Click to expand...
Click to collapse
This is not a full backup, but it might help you interactively recover some items without replacing the broken screen. Also, assuming this is something you're still looking to solve...
If you have adb debugging enabled, you can try to use https://github.com/Genymobile/scrcpy to interact with your phone over USB from a computer.
If you do not have adb debugging enabled, you can try to enable it via Recovery Mode. The steps to enable Recovery Mode below are from https://www.tenorshare.com/android/how-to-enable-usb-debugging-on-android-with-black-screen.html (I have not tried these steps).
Less:
To enable ADB without a screen:
1. Download the ADB toolkit for your computer and extract its contents to a folder.
ADB toolkit can be found at https://developer.android.com/studio/releases/platform-tools
ADB requires you have USB debugging enabled on your phone.
Since your phone has a black screen, reboot your phone into recovery mode to accomplish this.
Press the Volume Down and Power buttons at the same time to enter recovery mode.
2. Connect your phone to your computer, open a Command Prompt window in the ADB folder, and type the following command.
adb devices
3. You should see your device listed there.
Run the following commands one by one.
adb shell
mount data
mount system
4. Use the following command to pull the persist.sys.usb.config file from your phone to the PC.
adb pull /data/property/persist.sys.usb.config C:\Users\[your-username]\Desktop\
5. Access the persist.sys.usb.config file on your computer with a text editor and edit it to mtp,adb.
6. Run the following command to send the file back to your device.
adb push "C:\Users\[your-username]\Desktop/persist.sys.usb.config" /data/property
7. Download the build.prop file from your phone by using this command.
adb pull /system/build.prop C:\Users\[your-username]\Desktop\
8. Launch the build.prop file in a text editor like NotePad++ on your computer, and add the following code to it.
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
9. Save the file and transfer the file back to your device using this command.
adb push "C:\Users\[your-username]\Desktop/build.prop" /system/
10. Reboot your device using the following command.
adb reboot
11. You are all set. Your phone will boot up with USB debugging enabled.