Related
edit: If you are just looking for the solution, plz click here: http://forum.xda-developers.com/showpost.php?p=68626049&postcount=11
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
mike175de said:
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
Click to expand...
Click to collapse
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
With which version?
muradulislam said:
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
Click to expand...
Click to collapse
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
mike175de said:
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
Click to expand...
Click to collapse
You can use any firmware but the latest one should be better, and flash four images, boot, Cust, system and boot and let it boot normally.
Then put the dload folder with update.app in sd card and do an update from settings.
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
mike175de said:
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
Click to expand...
Click to collapse
I meant to say flash boot, Cust, recovery and system images.
Wrote boot twice
Nothing changed
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
mike175de said:
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
Click to expand...
Click to collapse
Of all the things you have already tried, the only thing remains to take it to a Huawei service center.
May be someone else can help you here but I have read most of honor 6 and 7 posts and I don't think there is anything there for this problem atm.
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
mike175de said:
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
Click to expand...
Click to collapse
I myself have an H60-L01, bought it from china, bricked and tried everything to revive it but could not, still have to try Huawei customer service in Pakistan, am not sure whether they will be able to help me or not, but will give it a try. I wish you luck buddy. Hope you find a solution.
It's alive ;o)
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
The same can not restore brick
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
igorxxl said:
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
Click to expand...
Click to collapse
Have you unlocked and rooted it?
When does it says that message?
error! no func. func_boot_kernel or _recovery
zinko_pt said:
Have you unlocked and rooted it?
When does it says that message?
Click to expand...
Click to collapse
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
igorxxl said:
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
Click to expand...
Click to collapse
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
igorxxl said:
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
Click to expand...
Click to collapse
You can also try installing custom recovery and restore a twrp backup of ROM.
zinko_pt said:
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Click to expand...
Click to collapse
goldfinv said:
You can also try installing custom recovery and restore a twrp backup of ROM.
Click to expand...
Click to collapse
i'm in the same situation with my honor 6 plus pe-ul00 i'll try this metod!
mike175de said:
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0 [emoji14]
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
Click to expand...
Click to collapse
I got a problem at 9.3 or 9.4. The recovery wont start i see only honor logo i used PE_EMUI3.1_Android5.1_6.1.1.zip (as developer edition i.e sdcard/dload/UPDATE.APP) and PE-UL00-V100R001CHNC00B200.zip to extract and flash BOOT.img and RECOVERY.img
any ideas why i can't enter in recovery? =(
EDIT: "fixed with DC-Phoenix tool"
Hello,
So here is my problem.
My phone is stuck on this mode and I can't do anything. When I reboot it keeps showing the crashdump mode.
What I've done is that I unlocked the bootloader and did "fastboot boot twrp-3.2.3.0-enchilada.img", it showed the crashdump, so I tried "fastboot flash boot ..." instead.
Now it's stuck and I don't know how to solve my problem.
Please I need some help here, don't know how to get my phone working.
EDIT: I've managed to get rid out of this but my phone is in the booting screen (the red dot with the 2 whites) forever. I can access to the Fastboot, what should I do ?
Try looking for the unbrick tool/guid in the forums. That should fix it.
I managed to get my phone work again.
The problem was I flashed a non-boot image.
So in the CrashDump Mode, press (while phone not plugged) Volume Up + Power to go to Fastboot.
Boot a working TWRP, install official OTA and now everything is fine. Looks like the normal TWRP doesn't work on oxygen so I installed the blu spark one.
Looks like the normal TWRP doesn't work on oxygen
Click to expand...
Click to collapse
You just need to check latest version, before you do something to your firmware.
I have the same problem. OEM unlocking is not turned on on my device. I have used several versions of oos using MSM tool but no luck.
SOLVED
The answer is that I'm installed a wrong version of TWRP (the android Pie version), but I'm using Realme UI rom which is android 10.
Problem solving was :
1. Turn off the phone by quickly access fastboot and choose turn off, because it can't be turned off normally
2. Wait about 30 minute to 1 hour on turned off state to fix the restarting issue
3. Access the fastboot again and install a latest official rom. I've installed the ColorOS because my country doesn't get the official Realme UI yet
4. Reboot and it's all work normal again
Hi guys,
I've recently attempted to install TWRP on my Realme 5. But it always failed to boot to TWRP after I pressed vol up + power. So I decided to force boot to recovery using command adb reboot recovery. But it booted to stock recovery, even the twrp flashing was succeed.
The disaster begin now after I've accidentally erase the boot and recovery directory using fastboot command. It starts to bootlooping after a few minute, and it showed "The current image (boot/recovery) have been destroyed and can not boot" and it always restarted on that screen.
The fastboot can be accessed, but on a short time because it keeps restarting after a few minute. The device detected on my pc too if I boot to fastboot.
I've tried flashing the stock recovery image, but it didn't work. So I decided to go to a general phone repair shop, but they said that the eMMC was broken. What? The eMMC broken? I don't trust them and take back my phone because before it get bricked, it was fine and normal without any trouble.
Can someone help me? I'm desperate now
Click to expand...
Click to collapse
You need to go to Realme/Oppo service centre. They will fix it free of cost. Dont If you can excess fastboot. Flash boot image and Lastest TWRP image to try to unbrick.
I faced this problem so much. Now it's just fun to me.
You've install Android pie twrp to your stock Android 10 Realme UI.
You've to install Android 10 compatible twrp to the Android 10 Realme 5. Realme UI update has changed the partition table so that it can't get downgraded or flashed via .zip file via twrp. It's company's bad policy that they want to lock the phone after major update.
Now you should download all available twrp from Realme 5 XDA rom section and install one by one and check which one is compatible or works.
Always go to fastboot for flashing twrp.
To forcefully go to fastboot mode do the following :
1. Power Button + Volume Up Button + Volume Down Button
2. When the screen goes off then instantly
3. Power Button + Volume Down Button
Once I also couldn't get fastboot mode but after a full day trial I found this solution by myself. Now Realme 5 is a really fun phone to me which is completely under my control.
imran00_1 said:
I faced this problem so much. Now it's just fun to me.
You've install Android pie twrp to your stock Android 10 Realme UI.
You've to install Android 10 compatible twrp to the Android 10 Realme 5. Realme UI update has changed the partition table so that it can't get downgraded or flashed via .zip file via twrp. It's company's bad policy that they want to lock the phone after major update.
Now you should download all available twrp from Realme 5 XDA rom section and install one by one and check which one is compatible or works.
Always go to fastboot for flashing twrp.
To forcefully go to fastboot mode do the following :
1. Power Button + Volume Up Button + Volume Down Button
2. When the screen goes off then instantly
3. Power Button + Volume Down Button
Once I also couldn't get fastboot mode but after a full day trial I found this solution by myself. Now Realme 5 is a really fun phone to me which is completely under my control.
Click to expand...
Click to collapse
I found that's the major point (which I bold the quote). With a help from a friend, it's solved. Thanks for the answer.
same problem, do you have correct TWRP file? i've tried install twrp from all realme 5 sub forum, but no one it's working
I'm using Lenovo K6 Power... And wished to use custom ROM. So did all the procedures(ADB, TWRP, SuperSu, ETC). Now, at the time of installing custom ROM you have to wipe all data including your phone's UI (ROM) so I did that. Now I tried to Install that custom ROM several time but it didn't install, I don't know why. So I clicked on reboot button... And then boom... My phone is stuck at Lenovo logo. I know I made this mistake. I didn't understand that, How can a phone reboot if it's original OS is deleted.
It can't even enter in TWRP recovery mode. Fastboot can be seen sometimes.
So please me with this, I'm completely new in this. Read so many forums and watched so many videos on YouTube for this. But they didn't help me. Any help will be appreciated. Thank You.
Highlights-
1. Stuck at Booting Animation.
2. Can't enter into TWRP recovery mode any how.
3. Fastboot Appears on top sometimes.
sahil_am_18 said:
My phone is stuck at Lenovo logo. I know I made this mistake. I didn't understand that, How can a phone reboot it's original OS is deleted.
Click to expand...
Click to collapse
If phone gets powered on, then its bootloader get run ( comparable to UEFI/BIOS in Windows computer ) what , when its tasks have finished, tries to start/run Android OS.
jwoegerbauer said:
If phone gets powered on, then its bootloader get run ( comparable to UEFI/BIOS in Windows computer ) what , when its tasks have finished, tries to start/run Android OS.
Click to expand...
Click to collapse
I'm sorry ma'am but I didn't understand what you are saying.
sahil_am_18 said:
I'm sorry ma'am but I didn't understand what you are saying.
Click to expand...
Click to collapse
Is not bad: many do not understand
Eeach mobile device can get run, but without an OS it stops after bootloader finished, because it's just a box of bits.
simple
when bootloader shows up, or bring it up with key combinations, connect phone to PC, and in fastboot/bootloader (on phone) type
fastboot reboot recovery
or if not work then:
fastboot boot c:\twrp.img
and do the rest via twrp, like flashing custom ROM again, or just flash stock ROM
indestructible master said:
simple
when bootloader shows up, or bring it up with key combinations, connect phone to PC, and in fastboot/bootloader (on phone) type
fastboot reboot recovery
or if not work then:
fastboot boot c:\twrp.img
and do the rest via twrp, like flashing custom ROM again, or just flash stock ROM
Click to expand...
Click to collapse
Thank you very much mate...
My phone was successfully recovered into TWRP recovery mode. But now the problem is...
While installing ROM it is showing 255 error.
Any suggestions...
Or link to download Working ROM...
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
Nothing to worry and don't panic,
I've been facing problem like this.
To enter bootloader / download mode. With USB Cable plugged You must press and hold Power + Vol Down button then count it for 7-8 seconds, after that immediately release Power button, and press Vol Up + Down. Repeat this step if fail. U will see Download mode.
Regards.
szymin22 said:
I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo
Click to expand...
Click to collapse
Just need perfect count like 7-8 secs You will faced Download mode.
Regards.
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
You hold volume down + power button for 7 seconds and phone will be power off.
Then you press both volume buttons (vol up + vol down) and plug in cable what is connected to computer, this pusch you to download mode of phone.
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply
play 5 said:
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply
Click to expand...
Click to collapse
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
fastboot devices
Click to expand...
Click to collapse
Krys89 said:
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
Click to expand...
Click to collapse
If you mean Fastboot when I go to the official a750fn recovery there are a part his name install update from adb
If you mean it Im trayed only this command Fastboot reboot and after phone boted to OS
A think it mean its work right?
Or if fastboot the download mode yes it is work
Waiting your reply
Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
fastboot devices
Click to expand...
Click to collapse
it must show the id of device
Krys89 said:
Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
it must show the id of device
Click to expand...
Click to collapse
I used these command many time but in adb mode
exactly this is the thing I missing the Fastboot mode to...
Hi, Bennie from Holland here, with the same problem: tried to flash Twrp to the Samsung A750FN and now stuck in not working Twrp logo, flashing for 2 seconds and further a black screen< The fastboot using Odin can be used via the method described by szimin22, bur the adb fastboot gives no response. Does someone know the correct trwp version for this mobile or a firmware file that can be flashed by Odin?
A Week Later ...
i have installed on the a7 the firmware dated okt 2020 and i can install without any prob trwrp or PBRP! but the machine goes into bootloop again. The only thing which seems to be resolved is a normal functional recovery. Now the return to the phone itself and we are home! any suggestions, pls give us a chance to not smash the a7 through the kitchenwindow