Related
edit: If you are just looking for the solution, plz click here: http://forum.xda-developers.com/showpost.php?p=68626049&postcount=11
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
mike175de said:
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
Click to expand...
Click to collapse
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
With which version?
muradulislam said:
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
Click to expand...
Click to collapse
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
mike175de said:
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
Click to expand...
Click to collapse
You can use any firmware but the latest one should be better, and flash four images, boot, Cust, system and boot and let it boot normally.
Then put the dload folder with update.app in sd card and do an update from settings.
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
mike175de said:
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
Click to expand...
Click to collapse
I meant to say flash boot, Cust, recovery and system images.
Wrote boot twice
Nothing changed
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
mike175de said:
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
Click to expand...
Click to collapse
Of all the things you have already tried, the only thing remains to take it to a Huawei service center.
May be someone else can help you here but I have read most of honor 6 and 7 posts and I don't think there is anything there for this problem atm.
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
mike175de said:
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
Click to expand...
Click to collapse
I myself have an H60-L01, bought it from china, bricked and tried everything to revive it but could not, still have to try Huawei customer service in Pakistan, am not sure whether they will be able to help me or not, but will give it a try. I wish you luck buddy. Hope you find a solution.
It's alive ;o)
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
The same can not restore brick
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
igorxxl said:
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
Click to expand...
Click to collapse
Have you unlocked and rooted it?
When does it says that message?
error! no func. func_boot_kernel or _recovery
zinko_pt said:
Have you unlocked and rooted it?
When does it says that message?
Click to expand...
Click to collapse
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
igorxxl said:
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
Click to expand...
Click to collapse
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
igorxxl said:
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
Click to expand...
Click to collapse
You can also try installing custom recovery and restore a twrp backup of ROM.
zinko_pt said:
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Click to expand...
Click to collapse
goldfinv said:
You can also try installing custom recovery and restore a twrp backup of ROM.
Click to expand...
Click to collapse
i'm in the same situation with my honor 6 plus pe-ul00 i'll try this metod!
mike175de said:
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0 [emoji14]
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
Click to expand...
Click to collapse
I got a problem at 9.3 or 9.4. The recovery wont start i see only honor logo i used PE_EMUI3.1_Android5.1_6.1.1.zip (as developer edition i.e sdcard/dload/UPDATE.APP) and PE-UL00-V100R001CHNC00B200.zip to extract and flash BOOT.img and RECOVERY.img
any ideas why i can't enter in recovery? =(
EDIT: "fixed with DC-Phoenix tool"
Hi i own an honor 8 FRD-L09 and it's rooted , so the other day i updated the EMUI from 4.1 to 5.0 and my xposed installer said frame work is not intsllad and then i checked my supper su and it said my phone was not rooted and that this point i was what!!
so tried to boot up to the TWRP recovey and gusses what i cant and frist it showed my the the phone recovey options not the custom TWRP that i installed before. i flased The TWRP Recovey in to my phone and wrote the commoade [adb reboot recovery] so it would boot the TWRP That i just flashed but gets stuck on your devie is booting now for 20 min!!! so i thought and this moment hey what not factory rest your phone and everthing mabye the then i can re root my phone but once agian it got stuck on the same screen as when i tried boot TWRP [ YOUR DEVICE IS BOOTING NOW] So a this point i gave up and i wonder did this happedn to you guys who updated ther honor 8 and can you re root you phone again?
oh P.S when i hold the power and volume down buttom my phone turns on when i hold the power and volume up buttom for tre sec it goes to the honor 8 revory mode not the twrp and its saying download the new version of the recovey and its fails evey time and when hold the power and the volume buttom simultaneously i think it't trying to boot the TWRP recovey but it get's stuck on you deviec is booting now screen.
and soryy for my english the my frist languages
i too faced the same problem. some one please help
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Mine won't boot to TWRP and when I use the EMUI boot screen its saying it can't connect to Huawei erecovery servers. So I can't even wipe the root at this point. Any ideas?
Many Thanks!
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Well this worked for me, after a day of googling. the twrp-3.1.1-1-frd.img worked, it may have been following the instructions about "fastboot reboot, while holding the volume up.
hey guys.. having the same issue..
I have DUK-L09C432B183 bootloader unlocked and phone u locked..
I downloaded twrp and side loaded with adb/fastboot
but when I reboot (fastboot reboot) it doesn't enter twrp recovery but emui recovery menu.. any suggestions?
(I tried fastboot reboot whole holding volume down.. didn't work)
ok [EDIT] i could finally get TWRP installed .. i backup everything on external SD
then i flashed MAGISK.zip (v14) and from there phone will show HONOR and jsut now it booted into HUAWEI Erecovery and gives me 2 options "factory data reset "Q or Download latest version and recovery !
any suggestions how i can ROOT it ? should i keep on try with MAGISK or ? thank you guys !
SECOND EDIT
so i did FACTORY data reset.. then i ADB side loaded twrp emmc .. then i installed magisk 13.3 .. rebooted and everythign goodf ! i've twrp and device is rooted !!
all good
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Thank you so much for linking to that image file! I was looking on the internet for days!
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Hi,
If I used the official TRWP 3.1.1 first and it didn't work, can I just go ahead and flash the TWRP using the modified twrp.img at the above link to see if that works?
Not able to get into TWRP recovery, stuck on "Your device is booting now..."
Hey everyone,
I just unlocked my bootloader and now want to flash TWRP and SuperSU. My Phone is already Nougat with Emui 5.
The Problem is that I'm just not able to enter the recovery. When pressing volume down + power or trying "adb reboot recovery" in the command line, the phone starts in the "unlocked bootloader warning screen". But not like in the normal warning screen it doesn't give me options but just shows a white line saying "Your device is booting now..." and thats where it gets stuck. Only gets hotter...
The fun thing is I already was in the recovery but wasn't able to flash the SuperSU (r275). Maybe it was not compatible with Nougat. TWRP just couldn't mount various things. After reflashing the recovery below instead of some other version (don't know anymore) I'm not able to enter the recovery again.
Feels like I searched the whole Internet and there is nearly nobody with the problem or a solution. Tried this as well: https://forum.xda-developers.com/honor-8/help/honor-8-boot-to-twrp-recovery-lost-root-t3567462. It seems like nobody who published a Honor 8 + Nougat + TWRP + SuperSU "How To" acutally tried it himself.
I used this TWRP https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Please help me I can't use WhatsApp because I need to restore it with Titanium (Database way doesn't restore all chats... Other problem)
Thanks everybody I just can't stand this anymore
I had this issue after downgrading to EMUI 4.1 and upgrading to 5.0 again via twrp. I flashed some old 3.0.2.0 version from another developer. Booted into that, flashed the update.zip package for emui 5.0 and then i was able to successfully flash and boot into 3.1.1.0
sysak said:
I had this issue after downgrading to EMUI 4.1 and upgrading to 5.0 again via twrp. I flashed some old 3.0.2.0 version from another developer. Booted into that, flashed the update.zip package for emui 5.0 and then i was able to successfully flash and boot into 3.1.1.0
Click to expand...
Click to collapse
Thank you I got it!
So I got my L09 with Nougat/Emui 5 on it. Then just used TWRP from https://forum.xda-developers.com/showpost.php?p=70228949&postcount=252 (bootable, think ist ist 3.0.2.0) then flashed 3.1.1.0 from https://forum.xda-developers.com/honor-8/development/twrp-t3566563 (bootable) and finally flashed SuperSu from first Link again. Other SuperSU versions (like the phh r275) WERE NOT flashable.
Magisk is the most compatible root solution for the Honor 8 on Nougat. The only thing that doesn't work (seamlessly) is MagiskHide, but the root itself works and flashes fine from TWRP.
I have tried to flash twrp multiple times to no success. I have tried multiple variations of the tool but for some reason when I go try to boot into recovery it takes me to erecovery which fails to do anything.
Are you sure about button combination
If you're trying to boot in to recovery with your phone plugged in to the computer it will także you to erecovery. If only i could find the person who całe up with this stupid idea that caused me hours of struggles, they'd pay for it. also when you use the pwr + vol.down combination let go off the power when you feel the vibration and further hold the vol.down until you see the boot screen appear.
sysak said:
If you're trying to boot in to recovery with your phone plugged in to the computer it will także you to erecovery. If only i could find the person who całe up with this stupid idea that caused me hours of struggles, they'd pay for it. also when you use the pwr + vol.down combination let go off the power when you feel the vibration and further hold the vol.down until you see the boot screen appear.
Click to expand...
Click to collapse
OK so i go to bootloader flash twrp then when i try to reboot ive tried disconnecting from computer and holding vol up and power then when it vibrates release power and hold vol down too. It still just boots to unlocked bootloader screen then to os
Dalg1991 said:
OK so i go to bootloader flash twrp then when i try to reboot ive tried disconnecting from computer and holding vol up and power then when it vibrates release power and hold vol down too. It still just boots to unlocked bootloader screen then to os
Click to expand...
Click to collapse
Try adb reboot recovery in command line on your PC when phone is turned on
0mrwhatsupguy0 said:
Try adb reboot recovery in command line on your PC when phone is turned on
Click to expand...
Click to collapse
I tried this like 20 times but this time it worked! I know have TWRP working. weird think tho is that no keyboard or default Huawei apps are preinstalled and BT isn't working.
Few problems with Binary SU and BusyBox
My phone seems to be rooted. Titanium Backup works but I have to accept every App instalation manually. With other settings restoring gets stuck. Also SuperSU reminds me every time that my BinarySU needs an actualisation but fails if it tries. And finally BusyBox just isn't able to get itself installed.
I'm thinking about restoring stock firmware, update to Nougat, and flash the two TWRP Versions and SuperSU again but hate to spend ours on my phone. OnePlus One rooting was sooo easy...
Dalg1991 said:
I tried this like 20 times but this time it worked! I know have TWRP working. weird think tho is that no keyboard or default Huawei apps are preinstalled and BT isn't working.
Click to expand...
Click to collapse
Is there a number of times you have to do it? How should I transition from this stupid "Your device is an enemy of the state" screen to something that will connect to adb?
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
Nothing to worry and don't panic,
I've been facing problem like this.
To enter bootloader / download mode. With USB Cable plugged You must press and hold Power + Vol Down button then count it for 7-8 seconds, after that immediately release Power button, and press Vol Up + Down. Repeat this step if fail. U will see Download mode.
Regards.
szymin22 said:
I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo
Click to expand...
Click to collapse
Just need perfect count like 7-8 secs You will faced Download mode.
Regards.
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
You hold volume down + power button for 7 seconds and phone will be power off.
Then you press both volume buttons (vol up + vol down) and plug in cable what is connected to computer, this pusch you to download mode of phone.
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply
play 5 said:
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply
Click to expand...
Click to collapse
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
fastboot devices
Click to expand...
Click to collapse
Krys89 said:
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
Click to expand...
Click to collapse
If you mean Fastboot when I go to the official a750fn recovery there are a part his name install update from adb
If you mean it Im trayed only this command Fastboot reboot and after phone boted to OS
A think it mean its work right?
Or if fastboot the download mode yes it is work
Waiting your reply
Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
fastboot devices
Click to expand...
Click to collapse
it must show the id of device
Krys89 said:
Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
it must show the id of device
Click to expand...
Click to collapse
I used these command many time but in adb mode
exactly this is the thing I missing the Fastboot mode to...
Hi, Bennie from Holland here, with the same problem: tried to flash Twrp to the Samsung A750FN and now stuck in not working Twrp logo, flashing for 2 seconds and further a black screen< The fastboot using Odin can be used via the method described by szimin22, bur the adb fastboot gives no response. Does someone know the correct trwp version for this mobile or a firmware file that can be flashed by Odin?
A Week Later ...
i have installed on the a7 the firmware dated okt 2020 and i can install without any prob trwrp or PBRP! but the machine goes into bootloop again. The only thing which seems to be resolved is a normal functional recovery. Now the return to the phone itself and we are home! any suggestions, pls give us a chance to not smash the a7 through the kitchenwindow
Hello, I use realme c2 which runs on realme UI 1.0 based on Android 10. Recently I tried to install a GSI in it through ADB and platform tools. While installing it showed success in ADB but os was not flashed but instead, I lost my TWRP recovery too which I previously flashed. Now, whenever I try to power on my phone, it just keeps going into recovery mode but there's no recovery so it goes into boot loop. I can't even access fastboot mode. Even though I press the power button along with volume up or down or even both, it still goes into recovery only. Can anyone hep me solving this?
Sathvk KVS said:
Hello, I use realme c2 which runs on realme UI 1.0 based on Android 10. Recently I tried to install a GSI in it through ADB and platform tools. While installing it showed success in ADB but os was not flashed but instead, I lost my TWRP recovery too which I previously flashed. Now, whenever I try to power on my phone, it just keeps going into recovery mode but there's no recovery so it goes into boot loop. I can't even access fastboot mode. Even though I press the power button along with volume up or down or even both, it still goes into recovery only. Can anyone hep me solving this?
Click to expand...
Click to collapse
Hard Brick Fix Realme C2
Requirements PC Bypass Extracted OFP Sourceforge or AndroidFileHost C2 Keep restarting from download mode to keep c2 in download mode run brom.bat then connect device holding volume up, down & power after that install drivers (you can install...
forum.xda-developers.com
Follow this guide