Hello all,
please excuse me for resurrecting this old thread, but I ran into some issues here.
When following the instructions for flashing the recovery.img via the scatterfile with the SPFlashtool,
I could not open recovery and ended up seeing a black screen.
Since I had unlocked my boot loader before in another failed attempt to flash a custom rom,
I thought it would be a good idea to re-lock the bootloader.
I should have googled that beforehand.. Turned out to be the second best idea of the day,
since my Dooge Mix now displays "red state" and does not do much but bootloop.
I cannot get into fastboot anymore as well.
Has any of you guys managed to recover the phone from this state
or did I just make myself a beautifully illuminated paperweight?
Thanks in advance &
best regards
Seb
Update:
SOLVED: Saved it via SP Flash Tool
Moving to the back of the device, the Doogee Mix has two cameras (because every phone has to go that route now... I almost want to command Samsung for not doing that with the S8). Here, the 16-megapixel+8-megapixel set-up does all the usual two camera tricks. It can produce "bokeh" shots and also offer 2x zoom (like the iPhone 7 Plus and the OnePlus 5). I took some quick sample shots and the results are okay. I doubt this camera will blow anyone away. I'll go into Showbox jiofi.local.html tplinklogin more details during my review to be published in a week or so.
Related
Hi guys, i am new to this forum and would like some help on restoring a bricked (don't know how bad) android tablet. It first got jammed on the start screen logo because of an app that i uninstalled the wrong way. I then tried to reboot it and that is where the problem started, so I decided to try flash a nexus or TWRP or a CWM image with amd with no avail but my phone was detected. CMD kept on displaying that the size of the images were too large, but the RAMDISK.img flashed. After this I also tried sideloading the nexus 5 image, since that's all I could find in the bootloader that actually worked. Unfortunately, as soon as i copied it showed 'aborted' therefore I rebooted it and the cycle began
The battery then drained and now I can't access recovery mode or fast boot (only the menu) which eventually goes off after a few seconds, and when I plug it in, it shows the critical battery sign then tries to boot, but doesn't charge and does this repeatedly. It doesn't display the boot image at all.
It is an Alps LC 007 Tab with some MTK kernel and a custom recovery and bootloader. Is there any hope of reviving my tablet? Please help????????
dothwolo said:
Hi guys, i am new to this forum and would like some help on restoring a bricked (don't know how bad) android tablet. It first got jammed on the start screen logo because of an app that i uninstalled the wrong way. I then tried to reboot it and that is where the problem started, so I decided to try flash a nexus or TWRP or a CWM image with amd with no avail but my phone was detected. CMD kept on displaying that the size of the images were too large, but the RAMDISK.img flashed. After this I also tried sideloading the nexus 5 image, since that's all I could find in the bootloader that actually worked. Unfortunately, as soon as i copied it showed 'aborted' therefore I rebooted it and the cycle began
The battery then drained and now I can't access recovery mode or fast boot (only the menu) which eventually goes off after a few seconds, and when I plug it in, it shows the critical battery sign then tries to boot, but doesn't charge and does this repeatedly. It doesn't display the boot image at all.
It is an Alps LC 007 Tab with some MTK kernel and a custom recovery and bootloader. Is there any hope of reviving my tablet? Please help????????
Click to expand...
Click to collapse
I can access preloader with windows SP Flash Tool but nothing else? Isn't there some kind of way to flash images with the flash tool?
Please help:crying:
dothwolo said:
I can access preloader with windows SP Flash Tool but nothing else? Isn't there some kind of way to flash images with the flash tool?
Please help:crying:
Click to expand...
Click to collapse
Seriously? I came to this forum with a mild situation and now I've completely bricked my mt65xx device doing things I didn't know how to do. It's been 3 days!
DAY 1
I try use adb to undo soft brick but the battery dies and I can't access the bootloader or fastboot or recovery but just the boot menu.
DAY 2
I try use the SPF tool with not much knowledge from the YouTube videos I watched and I end up formatting my device with only a backup of the system.img (which isn't even an image).
DAY 3
The device is completely unresponsive after trying over and over with a little bit more knowledge from research.
Now I'm wondering what would've happened if I got a response at least to catch my attention and stop me from doing things without knowledge of what I'm doing. I'm not forcing People to help but at least reply so that I stop. 108 views and no reply. Sorry if I sound a bit too grumpy but I am not happy. .......
dothwolo said:
Seriously? I came to this forum with a mild situation and now I've completely bricked my mt65xx device doing things I didn't know how to do. It's been 3 days!
DAY 1
I try use adb to undo soft brick but the battery dies and I can't access the bootloader or fastboot or recovery but just the boot menu.
DAY 2
I try use the SPF tool with not much knowledge from the YouTube videos I watched and I end up formatting my device with only a backup of the system.img (which isn't even an image).
DAY 3
The device is completely unresponsive after trying over and over with a little bit more knowledge from research.
Now I'm wondering what would've happened if I got a response at least to catch my attention and stop me from doing things without knowledge of what I'm doing. I'm not forcing People to help but at least reply so that I stop. 108 views and no reply. Sorry if I sound a bit too grumpy but I am not happy. .......
Click to expand...
Click to collapse
Sorry for the late response ... we are trying to help, but xda is not our fulltime job. We do it voluntarily ... next to our jobs and real lifes.
As there is nothing about your exact device on xda, here are some useful threads about similar devices:
[UTIL][WIN][MT65xx] MTK Droid Root & Tools | MediaTek Android Smartphone by rua1
[GUIDE] How to 'unbrick' your Mediatek MT65xx by yuweng
[TUT] [TOOL] MT65xx ROM Porting by yuweng
If nothing of the above helps in your case, please ask in the [Ask Any Question][Newbie Friendly] by dagger thread.
Keep in mind to provide as much information as possible to get best help and advices.
Hope that you will find a way to unbrick your device.
Hello Users,
I've the following problem: A few days ago my about 3-year old Motorola RAZR HD XT925 (O2 Germany) stuck in using and I tried to restart it with holding "power" and "volume down". After that my phone seemed to boot but stuck at the pulsing "M"-Logo. Nothing happens. I do not have any experience with flashing smartphones and all this stuff so I started to read here and on other websides how I could solve my problem and I came up to this page here in the forum: [TUTORIAL] How to Flash Stock Motorola Fastboot files.
Tried to do everything like shown but I came up to the step where I start RSD Lite (tried v6.1.4 and v6.2.4) and my phone should be listed but it does not. ATB & Motorola USB Drivers are installed, but when I start the Utility the programm is searching for update but finds nothing. (I think it can't cause my phone can't get into mass-storage-mode without booting, or?) Fastbootmode seems ok, everything like it should be.
Can't figure out how I should get my phone shown in RSDLite.
So if anyone could help me I would be so thankful, cause I really love my RAZR and don't want to bury it! Additional needed information and/or pictures are no problem if needed!
Thanks in advantage!
(I apologize for any kind of grammar/spelling faults!)
Edith says: phone runs on Stock-Android (updated to 4.4.2).
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck
Where can I find "Send_command.exe" to use with my LG G4 (H811) in "download mode"? Is it a device- or manufacturer-specific thing? Or does the same one work on all Android phones?
My phone can't get past the Cyanogenmod boot logo, and it seems I borked my recovery, as detailed here. I can get into download mode, so I'm thinking that's my best bet to install a usable recovery, so I can fix this without wiping.
Thanks.
Hi !
Have a look at this guide , first post especially
Good luck !
Ok, i have a doogee x5 pro phone and i tried to root it by flashing twrp recovery using sp flash tools. While flashing i got the error "PMT Changed for the rom it must be download". So i did a small research on internet and i found out that i needed to format everything except bootloader. This succeded. So after that i tried to install the firmware with this succeding to. Unfortunately the time i tried to turn phone on it was dead. SP Flash Tools wont detect it anymore. Please help me cause the phone is not mine and its brand new! I can rate my self as moderate android user. :crying:
i think i have a bigger problem... I downloaded a stock rom for doogee max pro(cause i just realised it wasnt just pro it was max pro) and it didnt seem to be recognised again. Any help would be appreciated. I constantly keep trying to raise it from the deads. Thanks!
Ap0s said:
i think i have a bigger problem... I downloaded a stock rom for doogee max pro(cause i just realised it wasnt just pro it was max pro) and it didnt seem to be recognised again. Any help would be appreciated. I constantly keep trying to raise it from the deads. Thanks!
Click to expand...
Click to collapse
On mtk devices a preloader is independently installed, it should be almost impossible to destroy, I owned a x5 pro and had best success to flash it with sp flash by taking out the battery, press flash button and plug it in...
The second huge issue I see is when you used the specific flash tool format option you very, very likely killed the nvram partition which contained the imei, so you'll have to fix this too by generating a new one and using mtk engineer mode which is well described and to find on Google..
But let's go step by step. Check without battery, or if it's a non replaceable you'll need find the reset button..
i have tried before without battery and i tried just now but nothing. Its very weird it was detected before and now no in same and another machine. I am pretty confused and stressed. Hope i didnt do any physical damage.. :crying:. THANKS!
starting to get pretty stressed omg! and is there a difference between MT6737M and MT6737?
i came to the point im starting to lose my mind... tried everything i could, i have 5 days left to repair this phone and i dont wanna pay 85 euros for this. SP Flash Tools wont detect the phone. Tried almost 5 different scatter files,2 different PCs and different mtk drivers. Im losing my mind already
UPDATE: I almost fixed it! I had flashed wrong preloader so phone wasn't recognized by SP Flash Tool. I fixed preloaded with a little trick from here: link. After that i flashed stock rom downloaded from doogee.cc but phone will not boot resulting in a total black screen. When i hot Power + Vol Up it takes me to another screen:
Select Boot Mode:
Recovery
Bootloader
Normal
Doesn't matter which boot mode i choose i just get a total black screen which means i get nothing. Idk what is happening! Any further help would be appreciated! I constantly try to bring it back working with little success and small improvements.
Last UPDATE: FIXED my phone had no juice left inside so couldnt complete boot proccess. Now its all good running Btw someone must pin this META trick link i send on my previous post cause im sure more people out there have preloader issues!!! Thank you everyone!!
Sam Nakamura said:
On mtk devices a preloader is independently installed, it should be almost impossible to destroy, I owned a x5 pro and had best success to flash it with sp flash by taking out the battery, press flash button and plug it in...
The second huge issue I see is when you used the specific flash tool format option you very, very likely killed the nvram partition which contained the imei, so you'll have to fix this too by generating a new one and using mtk engineer mode which is well described and to find on Google..
But let's go step by step. Check without battery, or if it's a non replaceable you'll need find the reset button..
Click to expand...
Click to collapse
And yes i couldnt flash it with battery only with!