Related
Currently I am using both N6P and M8.
N6P supports 5V/3A but no QC2, and M8 supports QC2.
I don't want to carry 2 chargers all the time, so I did little bit search and found this:
http://www.amazon.com/gp/product/B0122P71FC?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It seems to be a good one, with 5V 3A, 9V 1.67A, 12V 1.2A, so now I guess I can use it with Zaptip.
Anything similar to that?
liweichen6 said:
Currently I am using both N6P and M8.
N6P supports 5V/3A but no QC2, and M8 supports QC2.
I don't want to carry 2 chargers all the time, so I did little bit search and found this:
http://www.amazon.com/gp/product/B0122P71FC?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It seems to be a good one, with 5V 3A, 9V 1.67A, 12V 1.2A, so now I guess I can use it with Zaptip.
Anything similar to that?
Click to expand...
Click to collapse
I have charger along with a USB-A to C cable. My 6P doesn't register as quick charging when using it.
fallingd0wn said:
I have charger along with a USB-A to C cable. My 6P doesn't register as quick charging when using it.
Click to expand...
Click to collapse
On 5V 3A?
If that's what it's actually outputting then the nexus doesn't see it that way. I suppose it may be my cables. I don't have a USB-C to A adapter to try the C to C cable that came with the phone.
FYI I have this charger and it registers as fast charging with my Nexus 6p:
http://www.amazon.com/gp/product/B00HPTU00E
Can't say for sure if it charges exactly the same power/speed as the stock charger, but did notice it was definitely charging very fast..
It's the $10.99 20W black version.
just4747 said:
FYI I have this charger and it registers as fast charging with my Nexus 6p:
http://www.amazon.com/gp/product/B00HPTU00E
Can't say for sure if it charges exactly the same power/speed as the stock charger, but did notice it was definitely charging very fast..
It's the $10.99 20W black version.
Click to expand...
Click to collapse
Says 5V 2.4A for each port. So I guess it would be slower than the stock one.
liweichen6 said:
Says 5V 2.4A for each port. So I guess it would be slower than the stock one.
Click to expand...
Click to collapse
Possibly but it did say rapid charging and it did charge plenty fast to me.
Honestly the stock charger doesn't seem very fast to me
Sent from my Nexus 6P using Tapatalk
When I plugged in my 6P's 5V/3A charger at 19% it said it would take 1 hour to charge. When I tried my iPad brick(5.2V/2.4A) and a USB C to USB A I got from amazon and it said it would take 1 hour to charge from 18%. Both said charging rapidly. It seems as long as the wall adapter puts out 5V and 2A or more it should charge rapidly, regardless of the wall adapter being USB A or C.
This charger situation is a nightmare. But....
I bought one of these awhile ago for $12 on sale, and I didn't expect for it to quick charge the Nexus 6p, but it does seem to register as quick charging.
http://www.amazon.com/gp/product/B0...harge aukey&qid=1446247138&ref_=sr_1_7&sr=8-7
The charger listed in the first post will register as quick charging when using a USB 3.1 certified A to C cable.
Has anyone found any cheap chargers that can charge this phone like the Essential charger does (really fast)? I have bought two different chargers and neither of them can really even charge the phone. The lock screen says it's charging slowly, and the battery meter acts like it's charging, but it doesn't actually charge. The chargers were both Quick Charge 3.0 chargers too. None of my old phone chargers with a type-c adapter will charge the phone either.
jay_em113 said:
Has anyone found any cheap chargers that can charge this phone like the Essential charger does (really fast)? I have bought two different chargers and neither of them can really even charge the phone. The lock screen says it's charging slowly, and the battery meter acts like it's charging, but it doesn't actually charge. The chargers were both Quick Charge 3.0 chargers too. None of my old phone chargers with a type-c adapter will charge the phone either.
Click to expand...
Click to collapse
Have you tried different cables?
Every charger I own will charge this phone. My Samsung, pixel, Motorola, etc usb type-c chargers will all work.
Sent from my PH-1 using Tapatalk
The phone requires a USB PD (Power Delivery) charger for rapid charging. It must have [email protected] and [email protected]
It doesn't support Qualcomm's Quick Charge.
I ordered this one and it rapid charges. It supports 5V/3A, 9V/3A, 15V/ 3A, 20V/2.25A
https://www.amazon.com/iClever-Delivery-Nintendo-Notebook-Compatible/dp/B07194RXTS/
jay_em113 said:
Has anyone found any cheap chargers that can charge this phone like the Essential charger does (really fast)? I have bought two different chargers and neither of them can really even charge the phone. The lock screen says it's charging slowly, and the battery meter acts like it's charging, but it doesn't actually charge. The chargers were both Quick Charge 3.0 chargers too. None of my old phone chargers with a type-c adapter will charge the phone either.
Click to expand...
Click to collapse
My MacBook pro adapter
Tikerz said:
The phone requires a USB PD (Power Delivery) charger for rapid charging. It must have [email protected] and [email protected]
It doesn't support Qualcomm's Quick Charge.
I ordered this one and it rapid charges. It supports 5V/3A, 9V/3A, 15V/ 3A, 20V/2.25A
https://www.amazon.com/iClever-Delivery-Nintendo-Notebook-Compatible/dp/B07194RXTS/
Click to expand...
Click to collapse
Thanks! Now, what about if I wanted it to just charge normally (not rapidly or slowly) for if if I wanted to leave it charging overnight? Don't think I need to spend the extra money on rapid chargers for that scenario...
jay_em113 said:
Thanks! Now, what about if I wanted it to just charge normally (not rapidly or slowly) for if if I wanted to leave it charging overnight? Don't think I need to spend the extra money on rapid chargers for that scenario...
Click to expand...
Click to collapse
No idea. Honestly, I don't know of anyone who consciously needs to control the speed of their charge. I avoid charging overnight by rapid charging during the day at work.
does it really need PD? they are kind of expensive and there are chargers out there with 5V, 6V, 9V, 12V @ 3A
e.g.:
https://www.amazon.de/CSL-Schnellla...id=1510146615&sr=1-4&keywords=usb+3a+netzteil
Tikerz said:
The phone requires a USB PD (Power Delivery) charger for rapid charging. It must have [email protected] and [email protected]
It doesn't support Qualcomm's Quick Charge.
I ordered this one and it rapid charges. It supports 5V/3A, 9V/3A, 15V/ 3A, 20V/2.25A
https://www.amazon.com/iClever-Delivery-Nintendo-Notebook-Compatible/dp/B07194RXTS/
Click to expand...
Click to collapse
Actually, It *does* support QC 3.0 and USB PD.
compuguy1088 said:
Actually, It *does* support QC 3.0 and USB PD.
Click to expand...
Click to collapse
Essential confirmed on their subreddit that it does not support Qualcomm Quick Charge. It supports USB PD.
Sent from my PH-1 using Tapatalk
Tikerz said:
Essential confirmed on their subreddit that it does not support Qualcomm Quick Charge. It supports USB PD.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Then why does the phone indicate it's rapidly charging when plugged into a QC 3.0 charger then?
compuguy1088 said:
Then why does the phone indicate it's rapidly charging when plugged into a QC 3.0 charger then?
Click to expand...
Click to collapse
I'm not sure how Android is programmed to display "Rapidly Charging", but I'm sure it's not by charging standard. Probably based on supplied power, but it definitely doesn't charge as fast as the stock charger. I noticed this with my QC chargers. It will say rapidly charging for a couple minutes and then just not charge at all or say charging slowly. Frustrating as hell so I bought an extra USB PD charger.
My Samsung chargers all work, and charge the phone to 100%. They just say charging, not quick charging, but whatever... The % goes up.
Sent from my PH-1 using Tapatalk
compuguy1088 said:
Then why does the phone indicate it's rapidly charging when plugged into a QC 3.0 charger then?
Click to expand...
Click to collapse
Try using the Ampere app on the Play store. It will show you what amounts of current etc is being used to charge the phone..
USB C Charger,CRDC Quick Charge 3.0 5V/3A 27W Type C Charger for iPhone,Xiaomi,Nexus 6P Nexus 5X,Nintendo Switch,Google Pixel XL
http://s.aliexpress.com/IZBBVbE3
(from AliExpress Android)
I ordered this. Won't be here for awhile though as it's coming from China. I brought the essential because it was cheap, might as well stick to the theme.
compuguy1088 said:
Then why does the phone indicate it's rapidly charging when plugged into a QC 3.0 charger then?
Click to expand...
Click to collapse
Yeah...it doesn't. I'm such a tool I assumed it did and bought two Ankar QC3 wall chargers and a Tronsmart QC3 car charger. None of them are able to charge the phone at all, says that it's charging slowly but doesn't seem as though it's charging at all.
bavarianblessed said:
Yeah...it doesn't. I'm such a tool I assumed it did and bought two Ankar QC3 wall chargers and a Tronsmart QC3 car charger. None of them are able to charge the phone at all, says that it's charging slowly but doesn't seem as though it's charging at all.
Click to expand...
Click to collapse
Phone needs a charger with USB-C Power Delivery and not QC. Anker has at least one model and Incipio has one as well. There are many others on Amazon.. The cool thing about those is that they also change my XPS-13. Only carry one charger when I travel.
I've got a few QC 2/3 chargers and a few USB-C PD chargers and what I've found is that depending on which USB-C to USB-A makes a difference whether I get rapid charge or not.
I'm slowly converting over to USB-C to USB-C but it is stupid expensive for some things like the power packs with USB-C...
Anyway, try a few different cables and see if it works for you, also it seems to work a tiny bit better on the Oreo Beta however my QC 2.0 car charger doesn't charge as fast as it did on 7.1.1 but luckily the car chargers are the cheapest USB-C PD items to buy, roughly about the same price as a cable.
One last note, the same charger and cable don't always go into rapid charging mode so replugging the cable in sometime kicks in rapid mode for me.
What is the best car charger?
Zargone said:
What is the best car charger?
Click to expand...
Click to collapse
Haven't tried it, but something like this with USB PD sounds like it would be good - https://www.amazon.co.uk/Charger-Delivery-Output-Adaptor-Samsung/dp/B01M2BLLVN/
I had my phone plugged into a regular USB jack on a car this weekend and the battery didn't charge at all
Alas, not available in the US...
I have the Samsung Note 4. Like the OP6, it has a proprietary "quick charge" mode, but I find it will also charge quite fast when provided with a non-Quick Charge source such as a battery that can source several amps of current.
How fast does the OP6 charge without the Dash charger and cable? (in terms of amps drawn from source?)
Like it would take years like why would you want to know this, if you broke your charger buy another and look after it like. It's one of the main features of the phone and they don't talk about how fast it charges like
At work i use a QC3.0 charger for my OP6. Didn't notice a great difference to the DASH charger at home. Maybe DASH is a few minutes faster.
40% to 70% charge with QC3.0 is still insanely fast.
Stay on topic guys. OP asked a question, which could be answered with facts, rather than opinions and scenarios. In my regular car charger, I go from 22 to about 70 in 40 minutes, if I can recall correctly.
ItsLaggyY said:
Like it would take years like why would you want to know this, if you broke your charger buy another and look after it like. It's one of the main features of the phone and they don't talk about how fast it charges like
Click to expand...
Click to collapse
I'm not sure if you're serious or sarcastic, but In case of the former, here are a few reasons why someone might be interested in charging with other than the Dash Charger:
1) AFAIK, Dash is available in AC mains or 12V Car charger versions. I often use a 20K mAH Anker powerbank battery for charging. That is usually in situations where other power is not available, but a quick charge is needed. Huge current is available, but would the OP6 use it?
2) I use a compact travel charger that has 5 USB charging ports. Using a Dash charger would require carrying another charger (big, bulky, without retractable prongs), and occupying one (or more due to the shape) additional AC outlets.
3) I have a phone charger in my bedroom, at my desk, in my travel bag (both AC and Car style), and in my car. A quick check on Amazon seems to indicate that the Oneplus6 charger is several times more expensive than other "quick charge" chargers. Over multiple charger locations, the extra costs add up.
Using the word "like" so many times makes it difficult to understand the post.
dwj said:
Using the word "like" so many times makes it difficult to understand the post.
Click to expand...
Click to collapse
I'm Irish, apology
I have a stockpile of fast chargers that used the weird Nexus standard (5V, 3A, non QC) and they're okay, and for overnight or at my desk at work that's plenty fast to get the job done. The phone shows them as "charging" and not "charging slowly."
I purchased a "Tinduqin oneplus5T charger" from Amazon that works and looks exactly the same as the original dash charger for about $20, but it seems to already be sold out.
If you don't use dash charger,you only can charge at 5v 1.5a,I have tested it with apple 45w pd charger,xiaomi qc3.0 and nexus 5v3a charger
timg11 said:
I have the Samsung Note 4. Like the OP6, it has a proprietary "quick charge" mode, but I find it will also charge quite fast when provided with a anon-Quick Charge source such as a battery that can source several amps of current.
How fast does the OP6 charge without the Dash charger and cable? (in terms of amps drawn from source?)
Click to expand...
Click to collapse
It won't charge very fast because it doesn't use any on board quick charge it's all in the dash charging brick
I have a bunch quick chargers 3.0 at home. It takes a life time. I end up buying the dash charger. I still use the quick charger for over night charging
there must be some sort of software restrictions on oneplus6 since measures show that oneplus6 cannot be charged with more than 5V-1.5A.
x111 said:
there must be some sort of software restrictions on oneplus6 since measures show that oneplus6 cannot be charged with more than 5V-1.5A.
Click to expand...
Click to collapse
Do you own the OP6? Do you have a USB power meter that could measure the charging current with and without the Dash charger and reply with the values?
On my Note 4, it charges at about 1.17A / 5 V when the screen is on, and the current goes up to 1.6A with the screen off. That is with either a QC2 Quick Charger or a battery power pack. The phone reports "quick charger connected" in both cases.
oneplus6 has 85% battery left, measured with usb voltmeter and original oneplus dash charger 5V-4A, it shows that oneplus6 is dawning 5V-1.3A and same thing is happening with other usb chargers capable to deliver over 5V-2A.
I guess oneplus6 should be discharged less than 50% or something in order to start receiving over 5V-3A
1N1ghth4wk said:
At work i use a QC3.0 charger for my OP6. Didn't notice a great difference to the DASH charger at home. Maybe DASH is a few minutes faster.
40% to 70% charge with QC3.0 is still insanely fast.
Click to expand...
Click to collapse
Is it possible to use a the original DASH-adapter but with another USB-C cable? I need a longer cable so I can use the phone whilwe charging.
OnePlus has a original cable for sale which is only 150cm Long.
My question is if I can buy any other manufacturers cable whish also support some sort of fast charging. I've heard for example that DASH-charging is the same charging model that Huawei P20 Pro uses, they just have different name. .
So, is there anyone here that has switched the OP original cable and charge it up with a cable from another manufacturer?
There has to be a solution to this. Me myself can't. be the only one that needs s longer cable.
x111 said:
oneplus6 has 85% battery left, measured with usb voltmeter and original oneplus dash charger 5V-4A, it shows that oneplus6 is dawning 5V-1.3A and same thing is happening with other usb chargers capable to deliver over 5V-2A.
I guess oneplus6 should be discharged less than 50% or something in order to start receiving over 5V-3A
Click to expand...
Click to collapse
That's normal. Phones pull the most amps when on low battery, then progressively less as they are charged.
Check how much it pulls on <40% and <80% respectively.
Well, I charged my Op6 with a no-name USB 3.0 charger yesterday (forgot my dash charger at home, I was by a friend) and from 3% to 100% it took about ~1 hour and 55 minutes.
Not that bad I guess. But I still prefer my dash charger
I'm using a huawei p20 pro charger atm. Phone states from 75 - 100 it will take 33 minutes. (prob a bit faster if I don't use the phone.
Here is a charging session with a Oneplus 2 charger without quick charge
Charging from 27% to 100% in 2 hrs, 40 min - avg. Charging speed: about 1000 mA/h
Hello,
I'm using this old thread since we're talking about the same thing.
Is there a kernel or rom for the OP6 that enables to draw as much current as possible form third party chargers? It's sad that it's stuck at 1.5A no matter the charger unless you use dash charger. 2A is already something, 3A would be awesome.
Of course only if this a software limit.
The 7 Pro is supposed to support 5v/3A, 15W charging from a Power Delivery charger, but I'm only seeing 4.5v/1.8A, which is about 8W slow charging.
Am I reading this wrong? What's the best/highest/fastest charging you've seen from a PD charger?
Charger used: https://www.amazon.com/gp/product/B07H9WMW6N/ USB C PD Charger with GaN Tech, RAVPower Wall Charger Adapter 45W Type-C Power Delivery
Cable used: https://www.amazon.com/gp/product/B06Y25Y6WX/ Anker Powerline+
Your battery is above 50% and charging speed slows with increasing battery percentage. To determine maximum speed of USB PD for the OP7Pro you need to check at a lower charge level. Warp charge will also not charge with 30W all the way.
What battery app is that?
Even with the OP charger once you get to 50-70% changing rate slows down by at least 50%, try when the phone is at 10% and then watch it for a couple minutes, that will tell you the max for that particular charger
Sent from my GM1915 using Tapatalk
Protomize said:
What battery app is that?
Click to expand...
Click to collapse
It's the built in diagnostics. Dial *#808# in the OP Phone app.
Swipe to the second screen, "Device debugging", and there's one test for Normal Charger, and one for Fast Charger.
Harry Pothead said:
Your battery is above 50% and charging speed slows with increasing battery percentage. To determine maximum speed of USB PD for the OP7Pro you need to check at a lower charge level. Warp charge will also not charge with 30W all the way.
Click to expand...
Click to collapse
DonKilluminati23 said:
Even with the OP charger once you get to 50-70% changing rate slows down by at least 50%, try when the phone is at 10% and then watch it for a couple minutes, that will tell you the max for that particular charger
Click to expand...
Click to collapse
That's a great point, thanks! I'll try again from a lower charge state!
OnePlus has said it supports 15w PD while screen is off and 5v 1.5a while display is on.
parsa5 said:
OnePlus has said it supports 15w PD while screen is off and 5v 1.5a while display is on.
Click to expand...
Click to collapse
Link?
338lm said:
That's a great point, thanks! I'll try again from a lower charge state!
Click to expand...
Click to collapse
Basically no change when the battery was much lower :crying:
parsa5 said:
OnePlus has said it supports 15w PD while screen is off and 5v 1.5a while display is on.
Click to expand...
Click to collapse
Relatively no change between screen on vs off
338lm said:
Link?
Click to expand...
Click to collapse
Question: Do the OnePlus 7 and 7 Pro supportpower
338lm said:
Basically no change when the battery was much lower :crying:
Click to expand...
Click to collapse
I'm seeing the same thing. I tried three different USB PD chargers that I used on my Pixel XL. The highest charge current I saw was 1980mA. The battery was in the low to mid 30% range. I used the Ampere app. To check the accuracy of the app, I tried two things. 1. I used the stock Oneplus Warp charger and Ampere showed 5740mA (wow, 5.7A is kicking some butt!). 2. While using my Belkin USB-PD car charger, I noted the voltage and current coming from my bench power supply. The bench supply was outputting about 10W so an Ampere reading of about 8W of energy into the phone made sense. I used three different cables too.
All my cables are USB-C to USB-C since all my PD chargers have a USB-C port on them. I see the standard for USB 3.1 has a max rating of [email protected] which can be done over a USB-A to USB-C cable. I wonder if the only way to get 15W into the phone (besides the Oneplus chargers) is to use a USB-A to USB-C cable with a charger that has a USB-A port and can support 3A? Edit: No, more research shows there there should be no problems with C-C. The Belkin PD car charger I have doesn't specifically say it supports [email protected], but the Anker AC USB charger does list [email protected] I can't get more than about 1900mA out of it even with the battery low.
I basically support all the users that OP failed this point to include proper USB PD function. Only 7.5w to 10w is supported without any dash or warp charger. Confirmed
should be fixed with 10.0.2
Power Delivery (PD) is very complex. For example the USB PD Revision 3 specification is 657 pages. Much of the complexity involves the negotiation protocols between chargers and phones or other devices. In cases where a compatible protocol can't be negotiated between a charger and phone the page 242 of the spec says: "Shall supply the default [USB 2.0], [USB 3.2], [USB Type-C 2.0] (USB Type-C®) or [USBBC 1.2] voltage and current to VBUS when a Contract does not exist (USB Default Operation)." That's my guess why people are seeing lower charging currents than advertised by the chargers.
The OP's charger has this interesting cryptic note on their Amazon page: "Rapid charge: USB-C charger delivers 45-watts of power to charge and recharge all of your important devices at a high speed with PD 3. 0 (5V/ 3a, 9V/ 3a, 12V/ 3a, 15V/ 3a, 20V/ 2. 25a) Note: USB adapter will not be able to trigger the PD protocol
Specifications are at https://www.usb.org/document-library/usb-power-delivery
Does this model support power delivery like the Pro model? If so has anyone tested how many watts it pulls from a power delivery charger? Oneplus states the pro model supports 5V/3A power delivery which I believe is 15watts.
Pro 30W
Non Pro 20W
Linuxkek said:
Pro 30W
Non Pro 20W
Click to expand...
Click to collapse
These specs are for Oneplus's proprietary warp charging which is separate from the power delivery standard.
Without that it's unreal slow, maybe 1A
Linuxkek said:
Without that it's unreal slow, maybe 1A
Click to expand...
Click to collapse
you are uninformed. in addition to Warp, the 7p supports PD upto 3a with screen off. Android police confirmed this in their review.
OP is asking if 7 also supports this.
I have not measured charging speeds, etc. but I have a bunch of official Google PD bricks here for my 2XL and my OP7 charges just as fast, if not faster, than my Pixel. Just anecdotal but I was happy with charging performance.
I've charged my OnePlus 7 from 14% to 100% in about 1h and 15min. I call that really fast charging.
nIGhT-SoN said:
I've charged my OnePlus 7 from 14% to 100% in about 1h and 15min. I call that really fast charging.
Click to expand...
Click to collapse
With the charger that came with the phone or a different charger?
The included charger, it's the 20W one.
Linuxkek said:
Without that it's unreal slow, maybe 1A
Click to expand...
Click to collapse
nIGhT-SoN said:
The included charger, it's the 20W one.
Click to expand...
Click to collapse
Do you know what this thread is about?
Everyone knows Dash 20W is super fast. We're asking about USB PD.
heov said:
Do you know what this thread is about?
Everyone knows Dash 20W is super fast. We're asking about USB PD.
Click to expand...
Click to collapse
Like I sad, it will be 1A, maybe for the first 50% 1.5A, because with 3A a lot will not pay the extra bucks for Dash charger.
Pro: 5V/6A - 3A
Non-Pro: 5V/4A - 3A? No way... with luck maybe 2A
I will get my OP7 next week and I can test it but I'm sure you will get up to 1.5A
I've charged it with a power bank from Huawei, with fast charge and it charged pretty quick. I haven't look at the time it took, but next time I will.
Linuxkek said:
Like I sad, it will be 1A, maybe for the first 50% 1.5A, because with 3A a lot will not pay the extra bucks for Dash charger.
Pro: 5V/6A - 3A
Non-Pro: 5V/4A - 3A? No way... with luck maybe 2A
I will get my OP7 next week and I can test it but I'm sure you will get up to 1.5A
Click to expand...
Click to collapse
So you are saying:
OP7 Pro supports USB 3.1, USB PD protocol to 3A, and Warp-protocol to 6A
OP7 supports USB 3.1, Dash-protocol to 4A, but NOT USB-PD?
Please do test it- to confirm, you must have 1. screen off 2. a USB power meter that can measure the draw (or an app that can record the draw while the screen is off- viewing current while in app will not work since it only works with screen off.
There seems to be a lot of people who don't understand what USB-PD is. Of course, if you use a normal USB charger that is neither Dash/Warp nor USB PD, it will not draw more than 1.5A.
nIGhT-SoN said:
I've charged it with a power bank from Huawei, with fast charge and it charged pretty quick. I haven't look at the time it took, but next time I will.
Click to expand...
Click to collapse
You can use a app, which will tell you how fast it charge.
heov said:
There seems to be a lot of people who don't understand what USB-PD is. Of course, if you use a normal USB charger that is neither Dash/Warp nor USB PD, it will not draw more than 1.5A.
Click to expand...
Click to collapse
Dude, USB-PD means USB Power Delivery. How somebody can not understand what this mean?
Oppo slow it down to sell VOOC/Dash charger (and cable) in the kernel, like on the OnePlus devices before.
When the OP7 support 3A, with 5V, you will get 15W, which is almost QC 3.0, so you can get 5 charger and any cable you want for the same price as a Dash charger. There is no way!
So I've tried today charging with my power bank, a HUAWEI 10000mAh QuickCharge power bank, from 1% to 100% and it took about 2h and 30min. From 15% I think it would take about 2h to charge. Power bank fast charging is rated at 9V 2A 18W. With Ampere it was showing to chager at about 1.3-1.4A. I would say it's pretty ok, it's not as fast as with the original charger, but it's ok.
nIGhT-SoN said:
So I've tried today charging with my power bank, a HUAWEI 10000mAh QuickCharge power bank, from 1% to 100% and it took about 2h and 30min. From 15% I think it would take about 2h to charge. Power bank fast charging is rated at 9V 2A 18W. With Ampere it was showing to chager at about 1.3-1.4A. I would say it's pretty ok, it's not as fast as with the original charger, but it's ok.
Click to expand...
Click to collapse
That is not a USB-PD bank. It'll charge at 1.5A tops with that. Our phones can't do QuickCharge.
Do the same test if you can, but use a USB-PD charger and screen off.
This thread is about getting a confirmation that it can regulate with USB-PD upto 3A when the screen is off. Our phones will not support QuickCharge or any other proprietary protocol.
We know It does Dash/Warp, regular USB upto 1.5A, and now we want to know if it does USB PD.
---------- Post added at 09:16 AM ---------- Previous post was at 09:04 AM ----------
So I caved and finally tested it myself.
Yes, the regular OnePlus 7 does support USB-PD 5v upto 3A with the screen off. With the screen on, I could get 1.94A
I used an Essential PH-1 included charger, which is a USB-PD charger that can do 5V and 9V upto 3A. I went from 60% to 70% in 8 minutes, and used the logkit to capture the current. While on, I was getting a consistent 1.94A, which is higher than a regular USB charger which usually peaks around 1.4-1.5A. With the screen off, I kept the logkit going, and you can see the average is well above 2A (again, this is average- I had the screen on for a while before an after, which is why the average isn't 3A). It's also worth noting this was only from 60-70%.
So yes, like the OP7 Pro, the OP7 also supports USB-PD up to 3A with the screen off, and upto 2A with the screen on, much faster than a regular USB Charge, and ALMOST on-par with Dash Charging with screen off.
So hopefully this puts this thread to rest, and you can feel confident buying a USB-PD brick, and those that doubted it have learned that OnePlus didn't skimp on the USB controller on the regular OP7.
From the graph, you can see the flat line at -3 when the screen was off, and how it bounces "up" to -1.7 when it's on.
Can confirm, used my USB PD charger while away last week. Charge from 5ish% to full was around 2 hours. Much quicker than the old standard Microsoft USB C charger I use at home.
Charge time with PD was similar to that with my old mate 20 pro which showed 'fast charging' to indicate PD being used.