I'm not responsible for bricked devices, dead SD cards, thermonuclear war.
Please do some research if you have any concerns about features included in the products you find here before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Your warranty will be void if you tamper with any part of your device / software.
Click to expand...
Click to collapse
With MIUI 12.0.3, the blur effect in the Control Center was removed in the Redmi Note 8, and a gray background replaced blur.
I created a magisk module to bring back blur effect.
This module is for MIUI 12.0.0.6 EEA version
Note: The Bootloader must be unlocked and rooted in order to perform the operations.
INSTALL STEPS:
1. Open the Magisk Manager application
2. Go to the "Modules" section
3. Select the "Load from internal storage" option
4. Find and select the file blur-ginkgo-magisk-v12.0.0.6-EEA.
5. Restart the phone.
SCREENSHOOTS:
Check attachment!
IMPORTANT!
* This module is for Redmi Note 8. Do not apply to other devices.
* If phone won't boot after restart, just flash the Magisk Uninstaller from TWRP.
* Your device must be rooted.
* The module cannot be installed on devices without root!
It works on Willow?
toledo22 said:
It works on Willow?
Click to expand...
Click to collapse
no i try this and when i reboot the device the screen has gone black.. (redmi note 8t eea 12.0.3
bro we need blur enable for willow version
I don't have willow, sorry
Works like a charm
I
Ahsene said:
working fine for me (willow)
Click to expand...
Click to collapse
I
Ahsene said:
bro we need blur enable for willow version
Click to expand...
Click to collapse
have global willow, it's working fine here.
Related
ZIPS I FLASH ON STOCK ROM
Disclaimer:
Your warranty is now voided. I am not responsible for Bricked Devices, Dead SD Cards, World War 3 or You getting late on your date because the alarm app failed. Please do some research if you have any concerns about flashing ROMs or any other doubts!You are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
ZIPS
1. SUPER SU ZIP - Download from website
2. XPOSED ZIP - App has the download feature of xposed zip for various set of ROMs, CLICK HERE TO DOWNLOAD XPOSED
3. UNIVERSAL BUSYBOX INSTALLER ZIP - Download
4. Android O Emoji Font - Download
5. Magisk Installer - Visit here for more info and download
KEEP VISITING FOR FUTHER UPDATES,
NOTE : 1. I DON'T OWN ANY OF FILES .
2. ALL OF ROMS ARE TAKEN FROM 4PDA AND LENOVO-FORUMS.RU
3. DON'T BLAME ME FOR ANYTHING HAPPENS TO YOUR DEVICE AT OWN RISK
Click to expand...
Click to collapse
Disclaimer:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TOOL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Credits:
All the credits go to user gaguga and the people from the 4PDA. The contents of this guide are not my work - I merely translated it.
Requirements:
1. For this method to work you first need to unlock the bootloader or at least obtain the unlock code. That is explained in threads Unlock bootloader HONOR 9 and [Guide] How to get Bootloader unlock Code easily through Chinese site.
2. Owners of non-Chinese models have to disable FRP. Read about what that is and how to disable it here.
3. Enable the USB debugging mode in the Developer options.
MOD EDIT: Updated HWOTA found here thanks to @gaguga
Steps:
1. Download the file HWOTA.zip and unpack it to the root of your system. For instructions in English instead of Russian replace the hwota.sh file with this one.
2. Make a backup of all the important files since all the data will be erased during the process (consider this as a warning!).
3. Check if the USB debugging is enabled and the FRP disabled.
4. Download the three zip-archives from here if you wish to flash the EU version of ROM. Otherwise download the files of the desired region using Firmware Finder.
5. Move the downloaded files to folder "HWOTA\Update" and rename them in this way:
- update_data_full_public .zip to update_data_public .zip
- update_full _... .zip to update_all_hw .zip
- update.zip remains as is
6. Launch the file named update.bat which is located in the folder HWOTA and follow the instructions.
7. As a mode of update first choose the Rebrand option, then go to the Recovery and wipe all the data (including internal storage). If you only want to update the firmware to the newest version you can skip this step and go directly to the next one.
8. Run the batch file again and select Change the firmware option this time.
9. If you experience bootloops after flashing go to the Recovery and perform a factory reset (including wiping internal storage) then flash the firmware again.
Reserved.
lsvet1 said:
Disclaimer:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TOOL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Credits:
All the credits go to user gaguga and the people from the 4PDA. The contents of this guide are not my work - I merely translated it.
Requirements:
1. For this method to work you first need to unlock the bootloader or at least obtain the unlock code. That is explained in threads Unlock bootloader HONOR 9 and [Guide] How to get Bootloader unlock Code easily through Chinese site.
2. Owners of non-Chinese models have to disable FRP. Read about what that is and how to disable it here.
3. Enable the USB debugging mode in the Developer options.
Steps:
Download the file HWOTA.zip and unpack it to the root of your system.
1. Make a backup of all the important files since all the data will be erased during the process (consider this as a warning!).
2. Check if the USB debugging is enabled and the FRP disabled.
3. Download the three zip-archives from here if you wish to flash the EU version of ROM. Otherwise download the files of the desired region using Firmware Finder.
4. Move the downloaded files to folder "HWOTA\Update" and rename them in this way:
- update_data_full_public .zip to update_data_public .zip
- update_full _... .zip to update_all_hw .zip
- update.zip remains as is
5. Launch the file named update.bat which is located in the folder HWOTA and follow the instructions. Some instructions are in Russian since I haven’t yet had the time to translate them. Use Google Translate for the moment.
6. As a mode of update first choose the Rebrand option, then go to the Recovery and wipe all the data (including internal storage).
7. Run the batch file again and select Change the firmware option this time.
8. If you experience bootloops after flashing go to the Recovery and perform a factory reset (including wiping internal storage) then flash the firmware again.
Click to expand...
Click to collapse
Any idea why this keeps happening?
@RobertHarkness It seems to be an encoding problem. Check out this thread.
lsvet1 said:
@RobertHarkness It seems to be an encoding problem. Check out this thread.
Click to expand...
Click to collapse
I'm still running into trouble
RobertHarkness said:
I'm still running into trouble
Click to expand...
Click to collapse
Did you run it as admin?
lsvet1 said:
Did you run it as admin?
Click to expand...
Click to collapse
Yeah, No luck.
This looks promising... but we have to conqur language barrier first... Hope Honor 9 owner best of luck!
I got this to work, but back button no longer works :S
RobertHarkness said:
I got this to work, but back button no longer works :S
Click to expand...
Click to collapse
At 130 firmware does not work
For 120 works
gaguga said:
At 130 firmware does not work
For 120 works
Click to expand...
Click to collapse
Yeah I worked it out, All is working now and my phone is running perfectly
RobertHarkness said:
Yeah I worked it out, All is working now and my phone is running perfectly
Click to expand...
Click to collapse
it's good
Here in English
https://yadi.sk/d/-EIIGunq3LqChX
gaguga said:
it's good
Here in English
https://yadi.sk/d/-EIIGunq3LqChX
Click to expand...
Click to collapse
Thank you, I updated the guide.
lsvet1 said:
Thank you, I updated the guide.
Click to expand...
Click to collapse
7 point is only needed if you change China to eu
This is a file change oeminfo
gaguga said:
7 point is only needed if you change China to eu
This is a file change oeminfo
Click to expand...
Click to collapse
Okay, added the explanation.
it works! thx a lot!
I have updated my L09 phone through DNS from FF
So far everything is working fine
I've seen that my battery is much improved
Nice guide. I'm just wondering, if I have the STF-AL10 model (6gb ram/64GB), could I flash to the STF-L09 firmware? From what I've seen, the European firmware is 4gb ram, so the hardware is slightly different to my Chinese 6gb variant.
Ring0h said:
Nice guide. I'm just wondering, if I have the STF-AL10 model (6gb ram/64GB), could I flash to the STF-L09 firmware? From what I've seen, the European firmware is 4gb ram, so the hardware is slightly different to my Chinese 6gb variant.
Click to expand...
Click to collapse
You can, that's the whole point of rebranding.
One more question, does it cover every variant of honor 9?! Or there's a variant which can't be rebranded
**Among all the pie roms I tried for Redmi 5 this one was the most stable**
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Treble-ized 0s for Redmi 5
Credits: Phhusson, AOSIP
What works -
EVERYTHING!!
BUGS-
You tell me
How to Install
**First you will have your phone the official 8.1.0 Pixel Experience Rom installed (As a bugless treble base)**
Flash treble recovery.
Wipe - Factory data reset
Flash Gsi (Treble-ized 0s)
!!THEN REBOOT THE PHONE AND CONNECT WIFI!!
Then again go to twrp
Flash gapps
Reboot phone
Install the given camera apk( Portrait mode for both front and back cam, HDR+ :angel: )
Then again go to twrp
Install the camera fix file for the camera t work
ENJOY!
LINKS:
I just gave path directory and file names. Add https:// before all of them to use the links. And for the first two links remove the space after www and mega.
Treble recovery -
www .fahadpardesi.ga/2018/08/19/treble-recovery-for-redmi-5/?i=1
GSI (Treble-ized 0s-system a-only.zip) -
mega .nz/#F!rBsUyYYC!QlOfpjv7lnhrrgYssjLivA?nMk0CSIb
Gapps -
opengapps.org
Camera APK -
bit.ly/pfixgcam
Camera Fix file -
bit.ly/pgcamcrashfix
Thanks for reading. Enjoy pie!
Sakeef Sani said:
**Among all the pie roms I tried for Redmi 5 this one was the most stable**
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Treble-ized 0s for Redmi 5
Credits: Phhusson, AOSIP
What works -
EVERYTHING!!
BUGS-
You tell me
How to Install
**First you will have your phone the official 8.1.0 Pixel Experience Rom installed (As a bugless treble base)**
Flash treble recovery.
Wipe - Factory data reset
Flash Gsi (Treble-ized 0s)
!!THEN REBOOT THE PHONE AND CONNECT WIFI!!
Then again go to twrp
Flash gapps
Reboot phone
Install the given camera apk( Portrait mode for both front and back cam, HDR+ :angel: )
Then again go to twrp
Install the camera fix file for the camera t work
ENJOY!
LINKS:
I just gave path directory and file names. Add https:// before all of them to use the links. And for the first two links remove the space after www and mega.
Treble recovery -
www .fahadpardesi.ga/2018/08/19/treble-recovery-for-redmi-5/?i=1
GSI (Treble-ized 0s-system a-only.zip) -
mega .nz/#F!rBsUyYYC!QlOfpjv7lnhrrgYssjLivA?nMk0CSIb
Gapps -
opengapps.org
Camera APK -
bit.ly/pfixgcam
Camera Fix file -
bit.ly/pgcamcrashfix
Thanks for reading. Enjoy pie!
Click to expand...
Click to collapse
Best pie rom dude! Smooth. I'm loving it.:good:
Why not post this in the ROM section?
drnoellyg said:
Why not post this in the ROM section?
Click to expand...
Click to collapse
As i am only a junior member, i can't post in the rom section .
I have testing rom for a long time but never tried something on my own so didn't post anything. I made this gsi combo on my own and found it to be the more perfect and more stable than the two pie related ROMs posted in the ROM section before. Now I desperately want to share and help with this but can't.
Sorry brother.
Sakeef Sani said:
As i am only a junior member, i can't post in the rom section .
I have testing rom for a long time but never tried something on my own so didn't post anything. I made this gsi combo on my own and found it to be the more perfect and more stable than the two pie related ROMs posted in the ROM section before. Now I desperately want to share and help with this but can't.
Sorry brother.
Click to expand...
Click to collapse
I will try it. Thank you for creating it.
Kindly correct download link ....
A$h!$h said:
Kindly correct download link ....
Click to expand...
Click to collapse
I just gave path directory and file names. Add https:// before all of them to use the links. And for the first two links remove the space after www and mega.
Sakeef Sani said:
I just gave path directory and file names. Add https:// before all of them to use the links. And for the first two links remove the space after www and mega.
Click to expand...
Click to collapse
still error comes
A$h!$h said:
still error comes
Click to expand...
Click to collapse
Dude, I tried them all again and they r working fine for me. If you tell on which specific link the error is occurring, i will reupload that.
This ROM have the same bug like others such as Hotspot.
arrijalifal said:
This ROM have the same bug like others such as Hotspot.
Click to expand...
Click to collapse
Try havoc gsi ..its fix
A$h!$h said:
Try havoc gsi ..its fix
Click to expand...
Click to collapse
Can you give me a link, please?
installed PE and installed treble recovery flashed the system a only img file but when i reboot it was stuck in boot logo. What went wrong?
Change Default Storage WITHOUT FORMATTING AS INTERNAL
The method given here will work for every device with any android version. However there are some devices which has option in storage settings to change default storage but that's only exists in old low end phones.
There are 2 methods
1. Universal-Magisk needed
2. Alternative-(recommended for non pie and Q user) Magisk not needed (Not for Pie and Q)
Code:
[B]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included here.
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/B]
1. UniversalRequirements
1. Micro SDcard.
2. EdXposed for pie and Q user.
Official Xposed for non pie and q user
3. XInternalSD app (download from xposed app)
4. Magisk.
5. ExSDcard write access enabler Magisk module. (download it from magisk app)
Method
This works for all android versions but its mainly targeted to android pie and Q because xposed pie and Q are not completely stable right now.
1. Flash ExSDcard write access enabler. (download it from magisk app)
2. Download and install XInternalSD app.
3. Open the app and tick "enable for all apps" and "include system app"
4. Click on Path to Internal storage and write /mnt/media_rw/<your ext.sdcard's no.>
5. Open xposed app, go to modules section tick XInternalSD app and reboot.
Done!!✓
2. Alternative
Requirements NON PIE and Q
1. Micro SDcard.
2. Official Xposed by rovo89
3. XInternalSD app (download from xposed app
Method. [8.1 and below]Highly recommended for non pie and Q user
Note:- Don't use this method for pie and Q. Instead use the method give above. This is not for pie and Q
1. Download and install XInternalSD app.
2. Open the app and tick "enable for all apps" and "include system app"
3. Click on Path to Internal storage and write (may be already written) /storage/<your ext.sdcard's no.>
4. Open xposed app, go to modules section tick XInternalSD app and reboot.
Done!!✓
#reserved
working great in oneui device j5 pro
tutibreaker said:
working great in oneui device j5 pro
Click to expand...
Click to collapse
This works for each and every android device
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
What is this?
this is a simple zip for A/B devices only that will separate the ROM in your current slot so that it won't interfere with the ROM in the opposite slot, which we'll call the primary ROM.
How does it work?
it modifies the fstab of the ROM in your current slot to have separate data and shared internal storage, data will be in /data/media/multiboot in the actual data partition.
What's the catch?
this of course comes with a few unsolvable issues such as:
1- SElinux must be permissive on the ROM you're multibooting (secondary ROM)
2- NO ENCRYPTION, do not use this on encrypted data, it will break everything.
3- don't use multiple users on the secondary ROM, it's unlikely to work (not tested)
4- Magisk modules exhibit weird behavior, such as modules from the primary ROM showing in the secondary, it is strongly recommended to use core only mode if you're using Magisk (only on the secondary ROM)
5- and most importantly, screen lock is likely to stop working on the primary ROM every time you switch and switch back, once you're back to the primary ROM, your PIN/pattern might not be recognized, same thing that happens some times when you restore the data partition, it's recommended to remove your screen lock before switching to the secondary ROM, or delete /data/system/locksettings.db once you're back.
6- and lastly, this is unlikely to work on stock/ported ROMs, not tested though, feel free to try.
and that's all OK, as this is intended for testing purposes only, maybe you want to test a new ROM or a GSI but don't want to commit to it yet, this doesn't mean you don't need to backup your data, this has only been confirmed working on ONE device, no guarantees it will work for you.
USAGE:
flash the secondary ROM normally (flash, switch slot, reboot recovery, gapps, magisk etc...)
flash this zip
flash Kernel Sepolicy Patcher and switch to permissive.
Working great on the Mi A2 booted MIUI and Evo without any issues!
Rexee said:
Working great on the Mi A2 booted MIUI and Evo without any issues!
Click to expand...
Click to collapse
which evo? pie or Q?
yayakuya said:
which evo? pie or Q?
Click to expand...
Click to collapse
Evo 3.2 Q
Rexee said:
Evo 3.2 Q
Click to expand...
Click to collapse
so it's possible to have pie & Q running?
that's awesome...
which ROM you have as primary?
I'm on Evox 3.2 also on my slot A
need a guide to get secondary ROM
Great tool, thanks for your hard work
Working on mi a2 lite with miui 12 port as primary and posp as secondary
Nebrassy said:
flash Kernel Sepolicy Patcher and switch to permissive.
Click to expand...
Click to collapse
Links is down. Error 404
Haldi4803 said:
Links is down. Error 404
Click to expand...
Click to collapse
https://zackptg5.com/downloads/archive/Kernel-Sepolicy-Patcher.zip
Hi!
How can I realize it on super partition with A11 ?
I guess, I need reassemble my super with needed system_b, vendor_b and product_b? something else?