**Among all the pie roms I tried for Redmi 5 this one was the most stable**
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Treble-ized 0s for Redmi 5
Credits: Phhusson, AOSIP
What works -
EVERYTHING!!
BUGS-
You tell me
How to Install
**First you will have your phone the official 8.1.0 Pixel Experience Rom installed (As a bugless treble base)**
Flash treble recovery.
Wipe - Factory data reset
Flash Gsi (Treble-ized 0s)
!!THEN REBOOT THE PHONE AND CONNECT WIFI!!
Then again go to twrp
Flash gapps
Reboot phone
Install the given camera apk( Portrait mode for both front and back cam, HDR+ :angel: )
Then again go to twrp
Install the camera fix file for the camera t work
ENJOY!
LINKS:
I just gave path directory and file names. Add https:// before all of them to use the links. And for the first two links remove the space after www and mega.
Treble recovery -
www .fahadpardesi.ga/2018/08/19/treble-recovery-for-redmi-5/?i=1
GSI (Treble-ized 0s-system a-only.zip) -
mega .nz/#F!rBsUyYYC!QlOfpjv7lnhrrgYssjLivA?nMk0CSIb
Gapps -
opengapps.org
Camera APK -
bit.ly/pfixgcam
Camera Fix file -
bit.ly/pgcamcrashfix
Thanks for reading. Enjoy pie!
Sakeef Sani said:
**Among all the pie roms I tried for Redmi 5 this one was the most stable**
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Treble-ized 0s for Redmi 5
Credits: Phhusson, AOSIP
What works -
EVERYTHING!!
BUGS-
You tell me
How to Install
**First you will have your phone the official 8.1.0 Pixel Experience Rom installed (As a bugless treble base)**
Flash treble recovery.
Wipe - Factory data reset
Flash Gsi (Treble-ized 0s)
!!THEN REBOOT THE PHONE AND CONNECT WIFI!!
Then again go to twrp
Flash gapps
Reboot phone
Install the given camera apk( Portrait mode for both front and back cam, HDR+ :angel: )
Then again go to twrp
Install the camera fix file for the camera t work
ENJOY!
LINKS:
I just gave path directory and file names. Add https:// before all of them to use the links. And for the first two links remove the space after www and mega.
Treble recovery -
www .fahadpardesi.ga/2018/08/19/treble-recovery-for-redmi-5/?i=1
GSI (Treble-ized 0s-system a-only.zip) -
mega .nz/#F!rBsUyYYC!QlOfpjv7lnhrrgYssjLivA?nMk0CSIb
Gapps -
opengapps.org
Camera APK -
bit.ly/pfixgcam
Camera Fix file -
bit.ly/pgcamcrashfix
Thanks for reading. Enjoy pie!
Click to expand...
Click to collapse
Best pie rom dude! Smooth. I'm loving it.:good:
Why not post this in the ROM section?
drnoellyg said:
Why not post this in the ROM section?
Click to expand...
Click to collapse
As i am only a junior member, i can't post in the rom section .
I have testing rom for a long time but never tried something on my own so didn't post anything. I made this gsi combo on my own and found it to be the more perfect and more stable than the two pie related ROMs posted in the ROM section before. Now I desperately want to share and help with this but can't.
Sorry brother.
Sakeef Sani said:
As i am only a junior member, i can't post in the rom section .
I have testing rom for a long time but never tried something on my own so didn't post anything. I made this gsi combo on my own and found it to be the more perfect and more stable than the two pie related ROMs posted in the ROM section before. Now I desperately want to share and help with this but can't.
Sorry brother.
Click to expand...
Click to collapse
I will try it. Thank you for creating it.
Kindly correct download link ....
A$h!$h said:
Kindly correct download link ....
Click to expand...
Click to collapse
I just gave path directory and file names. Add https:// before all of them to use the links. And for the first two links remove the space after www and mega.
Sakeef Sani said:
I just gave path directory and file names. Add https:// before all of them to use the links. And for the first two links remove the space after www and mega.
Click to expand...
Click to collapse
still error comes
A$h!$h said:
still error comes
Click to expand...
Click to collapse
Dude, I tried them all again and they r working fine for me. If you tell on which specific link the error is occurring, i will reupload that.
This ROM have the same bug like others such as Hotspot.
arrijalifal said:
This ROM have the same bug like others such as Hotspot.
Click to expand...
Click to collapse
Try havoc gsi ..its fix
A$h!$h said:
Try havoc gsi ..its fix
Click to expand...
Click to collapse
Can you give me a link, please?
installed PE and installed treble recovery flashed the system a only img file but when i reboot it was stuck in boot logo. What went wrong?
Related
Hey ,
Welcome to the goodness of Oreo. This topic will be dedicated to our bring up of Oreo for Moto G 2015
Disclamier:
* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
- Please Do Not Mirror our files without talking to us. We can do that ourselves should we desire to. -
What's working?
Camera
RIL
WiFi
Storage
4G
VoLTE
What's not working?
Camcorder (works in footej)
Downloads:
Download [surnia]
Credits:
ResurrectionRemix
AOSP
Open Gapps
LineageOS
TheMuppets
XDA:DevDB Information
[ROM][UnOfficial][surnia]ResurrectionRemix v6.0.0[8.1.0_r11], ROM for the Moto E 2015
Contributors
althafvly, Alberto97
Source Code: https://github.com/LineageOS/android_device_motorola_surnia
ROM OS Version: 8.x Oreo
Based On: Lineage
Version Information
Status: Beta
Created 2018-02-11
Last Updated 2018-02-10
Reserved
10-02-2018
-Initial build
Everything working good
Great work. Everything works fine
which gapps to use?
Thanks work very well
?
hello the truth are all the same of the same no serve because the main thing of a phone is the camera and video camera and it does not work the only thing they do is add things in configuration in conclusion in order to not download it ?. You can use camera of google version 3.24 gets downloaded in apk mirror that record
Hi, @althafvly
I've just flashed your build, will test and report here.
What version of twrp do you recommend? Little problem with wipe cache's - "unsupported file system - auto".
I edited updater script and deleted "assert...".
Xt1524.
Thanks for your work.
I used latest official TWRP -> https://twrp.me/motorola/motorolamotoelte.html and can't confirm your problem.
I did a wipe of data without any problems, installed ROM, gapps, magisk and Pixel 2 launcher, wiped cache and dalvik cache and reboot without any issue.
I also have XT1524
But I can't give any usefull feedback. I just use this phone for playing music. So only thing I can say bluetooth and wifi are running good.
Com.android.phone (I forgot the correct name) crashes at start up, I couldn't use the rom.
I tried installing the by itself (no gapps) and com.android.phone is still crashing at start-up.
I was able to log the crashes
https://drive.google.com/file/d/1k686PPGbCsL8jD7rJHrxN7m-LrNcIe6a/view?usp=drivesdk
https://drive.google.com/file/d/1DdrhrIBuIbsaAW6yqyqMTcFidGOHpc2w/view?usp=drivesdk
Hello.
With TWRP-3.1.1-0, I can't install on my test-phone.
Red text :
" Updater process ended with ERROR: 7
Error installing zip file '/external_sd/RR-O-v6.0.0-20180210-surnia.zip' "
XT1524, TWRP 3.1.1-0, RR-N-v5.8.5-20170925-surnia-Final.zip (works fine), wipe all nore sdcard. I'll try again...
md5sum OK, for the *.zip
trefix said:
Hello.
With TWRP-3.1.1-0, I can't install on my test-phone.
Red text :
" Updater process ended with ERROR: 7
Error installing zip file '/external_sd/RR-O-v6.0.0-20180210-surnia.zip' "
XT1524, TWRP 3.1.1-0, RR-N-v5.8.5-20170925-surnia-Final.zip (works fine), wipe all nore sdcard. I'll try again...
md5sum OK, for the *.zip
Click to expand...
Click to collapse
You need to extract & edit updater-script from RR.zip.
Delete few checking lines: "assert...".
dzidexx said:
You need to extract & edit updater-script from RR.zip.
Delete few checking lines: "assert...".
Click to expand...
Click to collapse
OK, I'd read about this but didn't understand... I'm a poor frenchie n00b
Well, VIM, Nano ? Deleting lines or a # can works ?...
Thanks a lot.
https://forum.xda-developers.com/showthread.php?t=2522762
All can be done on android phone with total commander f.e.
trefix said:
Hello.
With TWRP-3.1.1-0, I can't install on my test-phone.
Red text :
" Updater process ended with ERROR: 7
Error installing zip file '/external_sd/RR-O-v6.0.0-20180210-surnia.zip' "
XT1524, TWRP 3.1.1-0, RR-N-v5.8.5-20170925-surnia-Final.zip (works fine), wipe all nore sdcard. I'll try again...
md5sum OK, for the *.zip
Click to expand...
Click to collapse
Update twrp
Everything?
crazix said:
Great work. Everything works fine
Click to expand...
Click to collapse
Everything? Video camera, volte calls, picture in picture? Search button in settings
Gapps
crazix said:
Great work. Everything works fine
Click to expand...
Click to collapse
althafvly said:
Hey ,
Welcome to the goodness of Oreo. This topic will be dedicated to our bring up of Oreo for Moto G 2015
Disclamier:
* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
- Please Do Not Mirror our files without talking to us. We can do that ourselves should we desire to. -
What's working?
Camera
RIL
WiFi
Storage
4G
VoLTE
What's not working?
Camcorder (works in footej)
Downloads:
Download [surnia]
Credits:
ResurrectionRemix
AOSP
Open Gapps
LineageOS
TheMuppets
XDA:DevDB Information
[ROM][UnOfficial][surnia]ResurrectionRemix v6.0.0[8.1.0_r11], ROM for the Moto E 2015
Contributors
althafvly, Alberto97
Source Code: https://github.com/LineageOS/android_device_motorola_surnia
ROM OS Version: 8.x Oreo
Based On: Lineage
Version Information
Status: Beta
Created 2018-02-11
Last Updated 2018-02-10
Click to expand...
Click to collapse
Which gapps?
8.1 gapps not available on
openGapps.org
8.0 gapps will work?
dzidexx said:
https://forum.xda-developers.com/showthread.php?t=2522762
All can be done on android phone with total commander f.e.
Click to expand...
Click to collapse
Hello. Thanks a lot for this link : I did (with vim), now it works fine in my second Moto E (XT1524).
So : RR-6.0 for tests, RR-5.8.5 for daily use, no gapps, no cloud... :good:
This guide is based on information posted here:
GUIDE
A8 GSI by prashantp01
All credits for ozontec, and for prashantp01 for creating GSI for A8+
AOSP PIE GSI on A750FN
I'm not responsible for whatever damage this can cause to your device
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
How to:
Update to latest official firmware (tested on ARIC and ARL4)
Make full boot at least once
Make sure you have a TWRP installed, follow *click me for TWRP*
Boot once after installing TWRP
Download the latest AOSP GSI
Boot into recovery
Perform a Factory Reset, don't touch System or any other partitions
Flash Magisk
Flash AOSP image as System
Flash Camera Fix *click me for fix*
First boot may take up to 10 minutes
Download:
AOSP GSI - Pick arm64 one with "aonly", rest is up to you!
If anything went wrong, flash stock firmware with ODIN!
What is working:
-Calls
-Wifi, Bluetooth, NFC
-Camera
-SD Card
-Dual Sim
-Vibrations, Speaker, Microphone, Sensors
-Everything but...
What is not working:
-USB to PC
-VoLTE / VoWiFi
-NFC menu is laggy, very laggy...
Remember to say "thank you" to those people:
Credits:
@ozontec for creating raw guide
@prashantp01 for creating GSI for A8/A8+
@ashyx for TWRP
Screenshots soon
compatibility
does it work for A750FNXXU1ARK2/ARK4?
Which file do I need to flash, vanilla, floss or gapps?
NickDeveloper said:
does it work for A750FNXXU1ARK2/ARK4?
Which file do I need to flash, vanilla, floss or gapps?
Click to expand...
Click to collapse
It should work with EVERY firmware on FN, but I simply was not able to try it out this way. Vanilla don't have gapps, use gapps imo.
This is awesome, thanks. Would there be a way to use stock camera app for wide lens support?
hhadi said:
This is awesome, thanks. Would there be a way to use stock camera app for wide lens support?
Click to expand...
Click to collapse
Only way to do it would be porting default camera app together with libs/drivers :c
Finger print option is not there in the settings for me. Is this a /vendor problem?
It sucks to be a a750gn user right now
Bootloop after flashing (help)
Erecik said:
This guide is based on information posted here:
GUIDE
A8 GSI by prashantp01
All credits for ozontec, and for prashantp01 for creating GSI for A8+
AOSP PIE GSI on A750FN
I'm not responsible for whatever damage this can cause to your device
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
How to:
Update to latest official firmware (tested on ARIC and ARL4)
Make full boot at least once
Make sure you have a TWRP installed, follow *click me for TWRP*
Boot once after installing TWRP
Download the latest AOSP GSI
Boot into recovery
Perform a Factory Reset, don't touch System or any other partitions
Flash Magisk
Flash AOSP image as System
Flash Camera Fix *click me for fix*
First boot may take up to 10 minutes
Download:
AOSP GSI - Pick arm64 one with "aonly", rest is up to you!
If anything went wrong, flash stock firmware with ODIN!
What is working:
-Calls
-Wifi, Bluetooth, NFC
-Camera
-SD Card
-Dual Sim
-Vibrations, Speaker, Microphone, Sensors
-Everything but...
What is not working:
-USB to PC
-VoLTE / VoWiFi
-NFC menu is laggy, very laggy...
Remember to say "thank you" to those people:
Credits:
@ozontec for creating raw guide
@prashantp01 for creating GSI for A8/A8+
@ashyx for TWRP
Screenshots soon
Click to expand...
Click to collapse
Am I the only one who is having a bootloop after flashing? (I did everything exactly like in the instructions.) Can anyone help me?
limeswift said:
This guide is based on information posted here:
GUIDE
A8 GSI by prashantp01
All credits for ozontec, and for prashantp01 for creating GSI for A8+
AOSP PIE GSI on A750FN
I'm not responsible for whatever damage this can cause to your device
Am I the only one who is having a bootloop after flashing? (I did everything exactly like in the instructions.) Can anyone help me?
Click to expand...
Click to collapse
Same here, I spent whole day on this thing and tried it 5+ times and lo luck. Maybe because I was trying it on A750F varient
I try to install 4 times. SM-A750FN
2 times got boot without network, ROM detects 2 SIM cards but unknown, cant search for networks, no phone numbers, only WiFi works.
Erecik said:
This guide is based on information posted here:
GUIDE
A8 GSI by prashantp01
All credits for ozontec, and for prashantp01 for creating GSI for A8+
AOSP PIE GSI on A750FN
I'm not responsible for whatever damage this can cause to your device
How to:
Update to latest official firmware (tested on ARIC and ARL4)
Make full boot at least once
Make sure you have a TWRP installed, follow *click me for TWRP*
Boot once after installing TWRP
Download the latest AOSP GSI
Boot into recovery
Perform a Factory Reset, don't touch System or any other partitions
Flash Magisk
Flash AOSP image as System
Flash Camera Fix*click me for fix*
First boot may take up to 10 minutes
Download:
AOSP GSI - Pick arm64 one with "aonly", rest is up to you!
If anything went wrong, flash stock firmware with ODIN!
What is working:
-Calls
-Wifi, Bluetooth, NFC
-Camera
-SD Card
-Dual Sim
-Vibrations, Speaker, Microphone, Sensors
-Everything but...
What is not working:
-USB to PC
-VoLTE / VoWiFi
-NFC menu is laggy, very laggy...
Remember to say "thank you" to those people:
Credits:
@ozontec for creating raw guide
@prashantp01 for creating GSI for A8/A8+
@ashyx for TWRP
Screenshots soon
Click to expand...
Click to collapse
A7 2018 is released with Oreo,So It's support A/B Partition
a750fn android pie
in my a750fn with this firmware A750FNPUU1BSC4, the aosp gsi rom not work. The only custom rom work for me is Android P (PR1) sGSI that is unofficial rom and it is google pixel rom but data not work! please can you help me?
I followed all the instructions.... Bootloop on SM-A750GN.
This Havoc OS version is working on my 750FN
https://forum.xda-developers.com/showthread.php?p=79267026
I've updated to newest Pie One UI Firmware first.
I had Havoc OS at my Xperia XZ and its a very light rom.
And I like the customization features.
With GApps aroma you can pixelfy it very well.
Camera is also working.
In my opinion the battery drain is more less than Stock Samsung ROM (and i installed a lot Google stuff with GApps aroma).
There are two annoying bugs;
-In windows no Drives appaer with usb connection (MTP device is present in device manager)
-No auto brightness.
Maybe someone could help with this two bugs.
It dose not work on my A750F Pie version. The build number is A750FNPUU1BSC4. I tried this rom to flash but I faced with bootloop every time, I tried other versions of GSI also but not worked yet!
Is there any solition? Plz help me!
As you can see in my post, it's for A750FN!
Erecik said:
As you can see in my post, it's for A750FN!
Click to expand...
Click to collapse
Can you tell me why it will work only for A750FN and not other firmware version like GN etc.
blazzer12 said:
Can you tell me why it will work only for A750FN and not other firmware version like GN etc.
Click to expand...
Click to collapse
It's not firmware difference. GN, FN, F, G, etc are different HARDWARE versions, so some minor changes are present in every version of phone. That makes it works only on FN
Erecik said:
It's not firmware difference. GN, FN, F, G, etc are different HARDWARE versions, so some minor changes are present in every version of phone. That makes it works only on FN
Click to expand...
Click to collapse
Thank you for clearing that up for me.
Hijacks said:
This Havoc OS version is working on my 750FN
https://forum.xda-developers.com/showthread.php?p=79267026
I've updated to newest Pie One UI Firmware first.
I had Havoc OS at my Xperia XZ and its a very light rom.
And I like the customization features.
With GApps aroma you can pixelfy it very well.
Camera is also working.
Click to expand...
Click to collapse
Sorry to ask that annoying question, but do you know if VoLTE and or WiFi Calling are working on any of the GSI ROMs?
MIUI X Mi5 X ROM
This one isn´t my Rom i only provide this ROM to You from this Autor
IgorOriginal 4PDA Version / Thread
You can find out more and talk each other over the Telegram Chat: https://t.me/MiuiMIA1tissot
Also there wil be postet new Rom version´s.
Code:
include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
If you like to report errors use https://github.com/berlinux2016/MIUI10
All Rom Downloads are here availble: Androidfile Host (Right side).
The most up to date is the onelike these example: 9=Year 3= Month 1= Day
Also this one is Weekly Beta Version: xiaomi.eu_multi_MI A1_9.3.1_v10-8.1.zip
and this are Stable signed version > "MiRoom" < : Mi A1_MIUI_9.2.28_MiRoom_8.1.zip
Instructions how to Install if you are still on Android 8
- Wipe Data / System / Art / Dalvik
- Flash Rom
- If necessary, we flash the userdata
- Reboot, give time for initial setup We have patience, the setup takes about 15-25 minutes.
- After initial setup, restart again. it may seem that the system is terribly slow
Enjoying!
If system does not boot after 25 minutes:
Fastboot flash userdata with command
Code:
Code:
fastboot flash userdata userdata.img
Userdata Download
Reboot to recovery
Flash MIUI ROM
For Update:
- install the update without Wipe
-Reboot into Recovery and flash Rom
- after that set the Camera Fix you find them with Magisk Online "Mi A1 Camera Fix Lag Fix Oero" Once Downloaded/ Installed there you can use them next time with manual mode in Downloads folder.
For the one who are using the new Android 9 and need to downgrade need to use this tutorial for Downgrade without loosing the Imei:
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
Download of all files included the Downgrade files (about 3.2GB):
https://mega.nz/#F!v81xzQJb!JXXsokMUM8hwEa-v-ivs2g
I just made this relativly quick so please tell me if i forgot something.
By the way, here are the old Miui Thread: https://forum.xda-developers.com/mi-a1/development/rom-miui-10-mi-a1-epic-mod-t3879804
If you have questions, write to the topic.
Lets try
But where is they cámara Fix??
I Saw a Lot of roms.. but no te camera Fix..
Whats they difference between mirom and EU..
Camera Fix is in Magisk Online.
It´s the normal "Mi A1 Camera Lag FIx Oreo"
And one thing: Ican´t Boot the Weekly version 9.3.1. It was instant reboot to TWRP =/
I go with Normal version MiRoom and ignored the TWRP message in instal log.
First impression are: Verry snappy and fast.
The new miui 10 theme are not the same i know from Epic Miui because of the square shaped icon´s.
If you like to update Magisk u need to do this over the magisk app by Direct Install.
In epicrom, camera Fix, is for portait mode...
Portait mode works?
Mi cloud works?
Smartphone Camera for me are only to take fast shots. If i like to make good Pictures, i take my Sony Alpha 7 II
So i don´t know because i do not use them.
Maximaro said:
I just made this relativly quick so please tell me if i forgot something.
Click to expand...
Click to collapse
Telegram link: https://t.me/MiuiMIA1tissot
Miroom is not in spanish...
And xiaomi.eu 9.3.1 works perfect!
But i can't sing mi account... Pocarropa in epic rom do it!
Nueva actualización 9.3.14
I'm using the EU beta as my daily driver ?
i see only 9.3.1 on the download-link, u has 9.3.14, from where?
okay got it.
but the backlight of the 3 buttons is not working right.
it only lightning for 1-2 seconds, i setup to 5.
and most time it doesn´t light up
Can someone explain the differences of pro beta, Room beta, EU beta, and EU stable? Also, is this based on 4.9 or 3.18 kernel?
3.18 kernel, you can see in the screenshot of lovelyjcp above.
for me it´s currently not usable since i have the bug with the backlight of the buttons and also i think the power consumption is too high.
SeMo87 said:
i see only 9.3.1 on the download-link, u has 9.3.14, from where?
okay got it.
but the backlight of the 3 buttons is not working right.
it only lightning for 1-2 seconds, i setup to 5.
and most time it doesn´t light up
Click to expand...
Click to collapse
I don't have this bug ...
SeMo87 said:
i see only 9.3.1 on the download-link, u has 9.3.14, from where?
okay got it.
but the backlight of the 3 buttons is not working right.
it only lightning for 1-2 seconds, i setup to 5.
and most time it doesn´t light up
Click to expand...
Click to collapse
I can't find the 9.3.14
blade_m2003 said:
I can't find the 9.3.14
Click to expand...
Click to collapse
https://drive.google.com/file/d/1vUpOTlT1BWeBs1x9vSZ4Fmkp4rGli_Hc/view
I installed this rom, lots of force stops.
Sadegh said:
I installed this rom, lots of force stops.
Click to expand...
Click to collapse
LOL how about a clean install =/
I use the 9.3.14 version since there come out and hav not a singel problem!
So like always: the problem is in front of the screen.
Could you plz tell me the difference of these files:
xiaomi.eu_multi_MI A1_V10.2.3.0.ODBCNXM_v10-8.1.zip
xiaomi.eu_multi_MI A1_9.3.1_v10-8.1.zip
Mi A1_MIUI_9.2.28_MiRoom_8.1.zip
and 9.3.14 in google drive link above ?
are they all miui roms?
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this TREBLE
* SUPPORT before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Alright so this is only done on user demand since GSI's were not booting with stock and custom rom vendor images
Install Instruction:
* Flash OFFICIAL TWRP
* Format /system, /data and /cache
* Flash vendor zip:
https://sourceforge.net/projects/arrow-os/files/EXTRAS/X01BD/P-GSI-Vendor.zip/download
* Flash boot.img:
https://sourceforge.net/projects/arrow-os/files/EXTRAS/X01BD/boot_permissive.img/download
* Install any Pie GSI system image using TWRP (Install image -> choose your system.img -> select system partition)
* Reboot
Known issues:
You tell me
Bug report:
All bug reports without any logs will just be ignored.
Where can i find GSI?
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Working GSI's:
* PhhAOSP pie
* ArrowOS GSI 9.x
* AOSiP GSI pie
Lemme know and I'll update it here!
Contributors
@kubersharma, @bauuuuu
(GPL kernel source: https://github.com/ArrowOS-Devices/...tree/9e41580d6c9fb2d5d896fef5ac5403a12d882d00 for the bootimge (kernel inside) linked)
PS: Generic System Image are made to support all treble devices but do not expect it to work as perfectly as a device specific build nor expect to have everything working!
ENJOY
reserved
reserved
Is it for real?
Will sGsi roms boot.?
Anubhav_singh said:
Will sGsi roms boot.?
Click to expand...
Click to collapse
This is basically for properly made GSI (built from sources for example: the one from phhusson or based on his sources)
I am not sure if OEM ported (sGSI) will boot
But we will see what we can do. Thanks
Wow, thanks for this. You and Bauuuuu always surprise us.
Will android q gsi boot
reverseflash said:
Wow, thanks for this. You and Bauuuuu always surprise us.
Click to expand...
Click to collapse
+1
@kubersharma the vendor image does not seem to work with OEM ported GSIs. I've tested MIUI but that got stuck on Asus logo, didn't reach the bootanimation.
I've attached a zip (2 logs), one was tested with the vendor image on this thread and second with default Arrow vendor.
As the OP says it's for source built pie GSIs
There is a huge background story on how messed the treble is in our device right now thanks to Asus, for having too much blob dependency on system.
If someone wants to try Q GSI dp6 (Generic or Pixel) should give a try after flashing my latest (20190812) LineageOS 16.0 build
https://sourceforge.net/projects/ku...12-UNOFFICIAL-X01DB-user-release.zip/download
kubersharma said:
If someone wants to try Q GSI dp6 (Generic or Pixel) should give a try after flashing my latest (20190812) LineageOS 16.0 build
https://sourceforge.net/projects/ku...12-UNOFFICIAL-X01DB-user-release.zip/download
Click to expand...
Click to collapse
I tried pixel gsi but that didn't even reach bootanimation. Did you flash any additional patches?
Edit: I flashed permissiver and fix_zygote.
Thank you kuber and bauuua for your work for our device
Please make one too for X00RD. Plz ?
Need of Vendor For Android 10 OOS
Need vendor for android 10 Oxygen OS ...it's time you havent updated vendors Dev's...thanks in advance
Hi, @kubersharma. Sorry for the off-topic question but I have an Asus Zenfone 4 (ZE554KL) on which with the Oreo and Pie upgrade ASUS standardized BLOBs but does not created a dedicated vendor partition, so no official treble support. I wish I could flash the GSIs on it. The part of creating the vendor partition is no problem, but would you have any tips or tutorials on how to properly move the files from /system/vendor to /vendor in a functional way and the boot img hack needed to boot? Thank you very much!
does it work on android 10??
hi thank you for the rom. Can you make one for zs551kl(zenfone 4 pro) thank you very much
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS Modded is a free, community built, aftermarket firmware distribution of Android 12 (S), which is designed to increase performance and reliability over stock Android for your device.
LineageOS Modded is based on the Android Open Source Project and LineageOS with extra contributions from many people within the Android community.
All the source code for LineageOS Modded is available in the LineageOS Modded Github repo.
Make sure to wipe userdata, ensure you have at least taken one stock OTA!
Flashing Instructions:-
TinyFastbootScript:-
Make sure to wipe userdata
1. Download TinyFastbootScript
2. Download the ROM named *Images*
3. Unpack TinyFastbootScript and the ROM into the same directory
4. Run the bat file for TinyFastbootScript
5. Choose latest fastboot version
6. Place device in bootloader mode
7. Run the command for flashing custom firmware
8. Done!
Fastboot Method:-
1. Download the Images zip
2.
Code:
fastboot update *Images*.zip
3. Reboot and enjoy!
Bugs :
Permissive
Safetynet
DualSIM
Some Settings Functions
* Drop a comment down below if you need any help, you can also Join https://t.me/electimonrel on telegram if you need any help.
Downloads:
Lineage-Modded:
https://build.lolinet.com/file/lineage/nio/
Contributors
@Electimon, @erfanoabdi, @dianlujitao
Source Code: moto-sm8250
Version Information
Status: Beta
Jan 06: initial release
Amazing work
awesome
Great work on the ROM electimon, smoothest available, and the battery management is excellent.
Hi,
I think scoped storage doesn't work properly on my Moto Edge S with Lineage 19. I'm trying to use some apps that require it, but they crash every time I try to add a directory, like aethersx2 for example.
Hi all
I successfully installed the Rom but only sim 1 work
How to activate two sims please .
Thanks all
Makhreta said:
Hi all
I successfully installed the Rom but only sim 1 work
How to activate two sims please .
Thanks all
Click to expand...
Click to collapse
check again the above bug list
bawitdol said:
check again the above bug list
Click to expand...
Click to collapse
Yes i know ,
so this mean no solution for this problem ?
Makhreta said:
Yes i know ,
so this mean no solution for this problem ?
Click to expand...
Click to collapse
Some people on Telegram have reported both sims working by flashing Evolution X, then flashing to los-modded 19 without wiping. Your results may vary though
Beetle84 said:
Some people on Telegram have reported both sims working by flashing Evolution X, then flashing to los-modded 19 without wiping. Your results may vary though
Click to expand...
Click to collapse
but i cannot find evolution x rom for this device ???!!!
Makhreta said:
but i cannot find evolution x rom for this device ???!!!
Click to expand...
Click to collapse
Motorola Moto G100 / Edge S
The Motorola Moto G100 / Edge S is a 6.7" phone with a 1080x2520p resolution display. The Qualcomm SM8250-AC Snapdragon 870 5G chipset is paired with 6/8GB of RAM. The main camera is 64+16+2MP and the selfie camera is 16+8MP. The battery has a 5000mAh capacity.
forum.xda-developers.com
is it android 12?
i tried version 18 and the two sims is o.k
HOW TO INSTAL MAGISK in this rom
1. download TWRP 3.5.2 and magisk 23.0
2. command <fastboot boot twrp.img> in bootloader mode
3. command <adb push magisk.zip /sdcard> in twrp
4. flash magisk.zip file
5. reboot to system
^^
Works great thanks!
having some issues with Android Auto showing black display since switching to this tho?
anyone know how to fix?
Is there a newer build?
xisa11 said:
Is there a newer build?
Click to expand...
Click to collapse
Under development
Just wondering what the differences would be between thins and the non-modded Lineage? I'm assuming more features, add-ons, but what are they?
Hello and thanks to everyone who is working on these different Roms for the g100!
One question, which is the most stable Rom for the g100 (without Google) to use as an daily driver?
Is this Rom 19.0 capable as an daily driver?
Thank you
How do I flash this on Linux ?. I suppose it is a bunch of fastboot commands but I am not sure.