Hi guys! I am trying to unlock my bootloader from my Redmi 6. I've enabled developer mode, USB debugging and the option to unlock the bootloader. When I enter Fastboot and I try to unlock it with the Unlock tool, I am getting the message that I have to add my device to my account under Developer Options -> Mi Unlock Status. I already tried that a million times. When I press the "Add account and device" (after approving the permissions request of course), the button greys out and after a few minutes it will show the message "Request parameter error".
I also checked the devices under my Mi account, but my phone isn't present in Devices section. I am out of options, who can help?
It's running MIUI Global 11.0.4 and Android 9. Hope someone knows what's going wrong. Thanks!
Related
Model: MAH-L09C432B156
EMU: 5.0
Android Ver: 7.0 NOT ROOTED!
No access to Devlepoer options for USB Debugging
Hi I have a Huawei Mate 9 which is FRP locked, I have gained the unlocking code from Huawei and have all relevent software and instructions to unlock Bootloader and remove the FRP protecton but I am really struggling with connecting the device in CMD with adb.
I have drivers installed and have allowed connections to phone with HiSuite on device and PC, I am unable to get into Developer settings due to FRP protection bur according to what I have seen in every walkthrough shows that this should not be a problem, even though I am unable to enabe USB debugging. Anyway I did have it connected once but have not been able to since so if anone can tell me where i might be going wrong I would be grateful.
After resetting phone and following instuctions via Huawei to prepare device I hold Vol- and plug in USB to Boot into Fastboot/Recovery mode.
Open CMD and execute Adb.exe in command, after that I enter command \adb devices which gets deamon running but showing no device.
I have tried going into what settings I am able to enter and enable USB in any way possible but still to no joy.
I have looked at posts on here but not found anything that seems to help as yet or I have just not looked in correct place.
Please can someone help as this is frustrating. Thanks Stew.
If you entered fastboot already try "fastboot devices" instead of adb
Did you go into about phone and tap the "build number" 7 times to enable developer options? If so you should be able to access and enable USB debugging
Sent from my MHA-AL00 using XDA-Developers Legacy app
" I have gained the unlocking code from Huawei "
please could you tell me how did you get that frp unlocking code from stupid Huawei?
they didn't answer my emails for one month now!
jr313 said:
Did you go into about phone and tap the "build number" 7 times to enable developer options? If so you should be able to access and enable USB debugging
Sent from my MHA-AL00 using XDA-Developers Legacy app
Click to expand...
Click to collapse
frp lock doesnt matter if you dont have oem unlock permission it wont help try using HWOTA with unlock code
i am in same boat since a month now and unable to bring the device back to life as i dont have usb debugging enabled and oem unlock permission and phone is bricked through huawei own official app and firmware
hello guys
first off all there is no "oem unlocking" option in developer options menu
i tried to unlock my zenfone 4 max boot-loader in 2 ways
first i tried asus official app which didn't work
and then i tried to unlock it with "fastboot oem unlock" command then i got this massage " unlock boot loader" i select yes
but after a reboot a pop up came which said encrypting and nothing has happened
is there any other way ?
Look inside here:
https://www.getdroidtips.com/unlock-bootloader-zenfone-4-max/
Yes, I have searched the whole forum and after finding mixed answers I decided to post a question myself. I have used the Huawei Bootloader Unlock app from the Play Store in a P10 Lite and it worked fine but it says P20 is not supported. I have read on methods like disassembling the device but that's out of my range. So the question here is: Is there ANY way (apart from the disassembling one) to unlock the bootloader?
Thanks.
TotallyNotInUse said:
Yes, I have searched the whole forum and after finding mixed answers I decided to post a question myself. I have used the Huawei Bootloader Unlock app from the Play Store in a P10 Lite and it worked fine but it says P20 is not supported. I have read on methods like disassembling the device but that's out of my range. So the question here is: Is there ANY way (apart from the disassembling one) to unlock the bootloader?
Thanks.
Click to expand...
Click to collapse
I asked DC_Unlocker Support if they could Unlock my Bootloader on my P10Lite with android 8 ! And they told me after Android 8, and Emui 5+ the P10Lite Devices aren't Supported now.
If their would be a Way or if anyone has an other Idea... DLoad, Flashing Roms Rollback didn't worked for me.
But i would really like to try other Ways if their would be a Chance for a Working Way to Rollback on Android 7. Couse than DC-Unlocker would Work and could Unlock the Bootloader and Root the Phone, Flash TWRP and Doing much other things.
Sent from my [device_name] using XDA-Developers Legacy app
I'd love to know... I have my unlock code, but I have no idea how to use it. I got my code from Huawei before they stopped providing them.
ElChe said:
I'd love to know... I have my unlock code, but I have no idea how to use it. I got my code from Huawei before they stopped providing them.
Click to expand...
Click to collapse
First of all, enable the Developer Option
1. To Enable the Developer Option, Go to your Settings –> System -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
2. Now go to Developer optiosn in the settings and Enable OEM unlock
3. Download Minimal ADB and Fastboot
4. Turn off your phone and Press Volume Up and Power button simultaneously to open Fastboot mode or enter the command [to enter command, you need to connect your phone to PC using USB Cable]
Code:
adb reboot bootloader
5. now unlock your device’s bootloader with this command line.
Code:
fastboot oem unlock *****************
You need to replace the ****** with the unique unlock code.
Once it is done, you can reboot your phone. Now you can install TWRP Recovery, Custom Kernel, Root or even install Custom ROM. Enjoy!
TotallyNotInUse said:
First of all, enable the Developer Option
1. To Enable the Developer Option, Go to your Settings –> System -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled“
2. Now go to Developer optiosn in the settings and Enable OEM unlock
3. Download Minimal ADB and Fastboot
4. Turn off your phone and Press Volume Up and Power button simultaneously to open Fastboot mode or enter the command [to enter command, you need to connect your phone to PC using USB Cable]
Code:
adb reboot bootloader
5. now unlock your device’s bootloader with this command line.
Code:
fastboot oem unlock *****************
You need to replace the ****** with the unique unlock code.
Once it is done, you can reboot your phone. Now you can install TWRP Recovery, Custom Kernel, Root or even install Custom ROM. Enjoy!
Click to expand...
Click to collapse
Wow thanks! I'll get on that this weekend!
Device: Redmi Note 8 (India)
Windows 10
Official Mi Unlock Tool
Problem:
I add my account in developer Options
boot my phone to fastboot mode
connect to pc
install drivers
whenever I run miflash_unclok.exe it says>unlock>sign in to your account
but whenever I sign in, insted of a unlock page, it shows me my account details (like when you sign in from browser).
IDK what to do? cant get any help from anywhere
PS: tried both official and unofficial tools
POCO F1 Mi Unlock status stuck, keeps saying "Connect to network and try again" while mobile net is ok
I have the same problem as there:
Mi Unlock status stuck, keeps saying "Connect to network and try again" while net is
Mi Unlock status stuck, keeps saying "Connect to network and try again" while net is I'm trying to activate Mi unlock status on my old redmi3 so I can unlock the bootloader using their tool, but every time I press the button it 1st says...
forum.xda-developers.com
and spent on it 10+ hours..
kamerek said:
POCO F1 Mi Unlock status stuck, keeps saying "Connect to network and try again" while mobile net is ok
I have the same problem as there:
Mi Unlock status stuck, keeps saying "Connect to network and try again" while net is
Mi Unlock status stuck, keeps saying "Connect to network and try again" while net is I'm trying to activate Mi unlock status on my old redmi3 so I can unlock the bootloader using their tool, but every time I press the button it 1st says...
forum.xda-developers.com
and spent on it 10+ hours..
Click to expand...
Click to collapse
Check that everything is correct:
Unlock bootloader
https://new.c.mi.com/global/post/101245
https://en.miui.com/unlock/index.html
and ignore the error.
Bind your Xiaomi account to your phone. Tap Mi Unlock status » Agree » Add account and device. Make sure your device can connect to the internet using mobile data.
Click to expand...
Click to collapse
impossible to pass this step -
kamerek said:
impossible to pass this step -
Click to expand...
Click to collapse
What is the problem(details)?
Check my guide.
If you use 2 SIMs remove 1.
NOSS8 said:
What is the problem(details)?
Click to expand...
Click to collapse
"Connect to network and try again" while mobile internet is working OK - tried to log out and log in again many times, even tried : fastboot oem unlock - and then in cmd it says - not possible - locked phone
So basically the developer options in android 10 in POCO f1 (miui 12 global) in the MI unlock status - add account and device - > cant adde hone there..
FInd phone is working OK, I just checked all options that I found here in xda for - registered also new MI account , wiped old one and ..the same.
Retrial said:
Check my guide.
If you use 2 SIMs remove 1.
Click to expand...
Click to collapse
seen and did Your tutorial many times - never passed through :
5. Link the device to your Mi account in Settings > Additional settings > Developer options > Mi Unlock status
as
Connect to .. and try again - while Mobile data is OK.
Seems like servers are not allowing me to connect to them.
My phone is also after reset to factory default - by the fact I did fastboot lock > and then I restored phone - but nothing changed -> seems like bug in Miui 12 OR servers not allowing to add device and account to procedure of unlocking (I am from EU)
kamerek said:
"Connect to network and try again" while mobile internet is working OK - tried to log out and log in again many times, even tried : fastboot oem unlock - and then in cmd it says - not possible - locked phone
So basically the developer options in android 10 in POCO f1 (miui 12 global) in the MI unlock status - add account and device - > cant adde hone there..
FInd phone is working OK, I just checked all options that I found here in xda for - registered also new MI account , wiped old one and ..the same.
Click to expand...
Click to collapse
Check here that the phone appears and that everything matches.
Several unsuccessful attempts can block the procedure.
Preferably use your email address linked to the account rather than the phone number.
A factory reset can be useful (not 100% guaranteed).
Edit:
Following your previous post, this may come from your mobile provider and/or your plan or from Xiaomi (similar case with a poco X3 nfc).
i can see many people nowadays have this probem even with new poco f3...
NOSS8 said:
Check here that the phone appears and that everything matches.
Several unsuccessful attempts can block the procedure.
Preferably use your email address linked to the account rather than the phone number.
A factory reset can be useful (not 100% guaranteed).
Click to expand...
Click to collapse
checked many times...
I have seen a lot of feedback on this subject including for recent devices, surely a problem on the side of Xiaomi.
Wait and see.
NOSS8 said:
Edit:
Following your previous post, this may come from your mobile provider and/or your plan or from Xiaomi (similar case with a poco X3 nfc).
Click to expand...
Click to collapse
my simcard had one number - temporary one, then I was moving number from other provider to this recent one, and my simcard has this my omved number now for many months.. but is is usual normal procedure when moving from one to other operator. curently mi account receives sms etc from my number and it worked/works, the temp number is not available for smsm confirmations.
solved:
Steps to fix:
1. Change Region Settings to Singapore (Settings App -> Additional Settings -> Region -> Singapore)
2. Use a Singapore VPN (Don't disconnect the VPN till the end.)
3. Log out from your Mi Account
4. Click on create an account, make sure your VPN is still connected and choose Country/Region to Singapore and create a new mi account
5. Go to Mi Unlock Status and it should work now
These are the steps which I followed to get this issue fixed. Tell me if it works for you.
Mi Unlock Status | Connect to network and try again
I have already tried to just unlock the bootloader without the mi unlock status but i got an error that I can't unlock without doing that... you should try to connect your phone to mi account on phone some times, then connect to pc and it will work
xiaomi.eu