Hi
I've oneplus 7 pro with Open Beta 19, I need to install A11, I've tried to install OP4, stable but installation progress stuck at 84% for very longtime,
is there anyway to solve this?
Can I flash it over TWRP?
Probably, try OB1 Android 11 then OB4. If I recall , was the same process with PIE, you need incremental update first.
@soka said:
Probably, try OB1 Android 11 then OB4. If I recall , was the same process with PIE, you need incremental update first.
Click to expand...
Click to collapse
Thanks for your reply,
so I cannot update directly form OB19 to 11.0.0.2 Stable?
Sure TWRP will work.
Related
Hello, I have a questions. How to install a new official update 9.0.2 from beta 6?
If I tried that, phone told me, that I have a newer version so it can not be installed.
DrzkaCZ said:
Hello, I have a questions. How to install a new official update 9.0.2 from beta 6?
If I tried that, phone told me, that I have a newer version so it can not be installed.
Click to expand...
Click to collapse
you temp boot twrp and flash in twrp.
After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.
Can anyone confirm if TWRP 3.3.1-x blu_spark v9.108 works with the latest 10.3.1 release? Do I need to even update TWRP or can I stay on the current version?
I am currently on v9.107 with 10.0.1 and I want to update without losing root or data.
dgunn said:
Can anyone confirm if TWRP 3.3.1-x blu_spark v9.108 works with the latest 10.3.1 release? Do I need to even update TWRP or can I stay on the current version?
I am currently on v9.107 with 10.0.1 and I want to update without losing root or data.
Click to expand...
Click to collapse
It works mate
mitas35 said:
It works mate
Click to expand...
Click to collapse
What process did you use to update without losing root and data and did you go from 10.0.1 to 10.3.1?
I followed my usual guide to upgrade...
https://forum.xda-developers.com/mi-a2-lite/how-to/10-0-4-0-to-10-0-7-0-ota-keeping-magisk-t3916863/
The May update is 11.0.5.0. I have a patched boot with Magisk 20.4
https://yasmar.net/xda/patched_boot_11.0.5.0_204.img.gz
And the vanilla boot
https://yasmar.net/xda/vanilla_boot_11.0.5.0.img.gz
Did you update from 9.0? or from previous 10.0 ROM?
smicas said:
Did you update from 9.0? or from previous 10.0 ROM?
Click to expand...
Click to collapse
I went from Pie 10.0.20.0 to Q 11.0.4.0 to 11.0.5.0.
I wasn't offered 11.0.2.0.
a1291762 said:
I went from Pie 10.0.20.0 to Q 11.0.4.0 to 11.0.5.0.
I wasn't offered 11.0.2.0.
Click to expand...
Click to collapse
Thanks,
And from 10.0.2.0 to 11.0.4.0 - did you also update the same way, or did you clean flash from fastboot?
smicas said:
And from 10.0.2.0 to 11.0.4.0 - did you also update the same way, or did you clean flash from fastboot?
Click to expand...
Click to collapse
I've been using the same process for every OTA since 10.0.4.0.
Only a few updates caused issues.
10.0.9.0 needed a newer TWRP.
Magisk 20 broke TWRP.
When I did the android 10 upgrade I had an issue with some Magisk modules that I had not upgraded. It would have been fine if I'd upgraded them first. I disabled them to boot and then installed the upgraded modules.
Does anyone have the boot img from version 11.0.10.0?
abracadabra02099 said:
Does anyone have the boot img from version 11.0.10.0?
Click to expand...
Click to collapse
There is no such version for Mi A2 Lite.
11.0.5.0 is the newest release (Android 10 with May security patches).
Hi @a1291762,
I'd like to know if
. it is possible to downgrade from 11.0.5 to latest Android 9
. it is possible to use a full working Gcam on 11.0.5 and how to install it.
Thank you!
I'm currently on v. 10.0.18 (I stopped the latest update for Pie) and I have a CSOT screen.
DekiS3 said:
Hi @a1291762,
I'd like to know if
. it is possible to downgrade from 11.0.5 to latest Android 9
. it is possible to use a full working Gcam on 11.0.5 and how to install it.
Thank you!
I'm currently on v. 10.0.18 (I stopped the latest update for Pie) and I have a CSOT screen.
Click to expand...
Click to collapse
It was only the first Android 10 (11.0.2.0) that had issues with screens. The 2 followups (11.0.4.0 and 11.0.5.0) work on all phones.
In theory, it is possible to downgrade back to 10.0.18.0 using a fastboot image.
https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
To get to 10.0.20.0 you'll need to get the OTA zip and install that. I'm not sure how to do that, but this process seems like it should work: https://forum.xda-developers.com/mi-a2-lite/how-to/how-to-manual-update-v11-0-4-0-users-t4082815
It might be worth checking if people have done the downgrade successfully. For example, the Pie-Oreo downgrade caused modem issues.
There's heaps of threads where people discuss gcams, but I do not know what the state is because I use the stock camera app.
DekiS3 said:
...
Click to expand...
Click to collapse
Apparently there was a 10.0.20.0 fastboot, but it's not on the fastboot thread
I don't know where I got this URL from but 10.0.20.0 is http://bigota.d.miui.com/V10.0.20.0...0.PDLMIXM_20200327.0000.00_9.0_2baf524aaf.tgz
a1291762 said:
I followed my usual guide to upgrade...
https://forum.xda-developers.com/mi-a2-lite/how-to/10-0-4-0-to-10-0-7-0-ota-keeping-magisk-t3916863/
The May update is 11.0.5.0. I have a patched boot with Magisk 20.4
https://yasmar.net/xda/patched_boot_11.0.5.0_204.img.gz
And the vanilla boot
https://yasmar.net/xda/vanilla_boot_11.0.5.0.img.gz
Click to expand...
Click to collapse
First of all, i never had magisk on android 8-9 before,then i want to install it on android 10 , i'm quiet understand with the fastboot step, but i don't know if its ok to do it right on a10, i mean if i just boot with your android 10 patched_boot then install magisk, did i just rooted my phone ?
I just wanted to install GCam btw
Thank you.
I had a oneplus 6 and that updated to android 10 a while ago.
Now I recieved a oneplus 7 pro. But the problem is it will not update to android 10.
Tried a system update check, Said up to date.
Contacted oneplus they mentioned the local file upgrade
Downloaded that ZIP and tried again, it tells me system update installation failed.
I am rooted and have TWRP installed as well as magisk.
Considered flashing from TWRP, but since it is an official system update not sure how that would work.
Is this my best option or anyone have an idea on why it fails.?
Tried different suggestions, nothing seemed to work. Did not try to delete cache yet.
Hi
Did u try Tool All-in-one? Marvellous tool!
Envoyé de mon GM1913 en utilisant Tapatalk
eracet said:
I had a oneplus 6 and that updated to android 10 a while ago.
Now I recieved a oneplus 7 pro. But the problem is it will not update to android 10.
Tried a system update check, Said up to date.
Contacted oneplus they mentioned the local file upgrade
Downloaded that ZIP and tried again, it tells me system update installation failed.
I am rooted and have TWRP installed as well as magisk.
Considered flashing from TWRP, but since it is an official system update not sure how that would work.
Is this my best option or anyone have an idea on why it fails.?
Tried different suggestions, nothing seemed to work. Did not try to delete cache yet.
Click to expand...
Click to collapse
Hi,
you cant update to the latest 10 from 9 ... you need to do it incrementally
eracet said:
I had a oneplus 6 and that updated to android 10 a while ago.
Now I recieved a oneplus 7 pro. But the problem is it will not update to android 10.
Tried a system update check, Said up to date.
Contacted oneplus they mentioned the local file upgrade
Downloaded that ZIP and tried again, it tells me system update installation failed.
I am rooted and have TWRP installed as well as magisk.
Considered flashing from TWRP, but since it is an official system update not sure how that would work.
Is this my best option or anyone have an idea on why it fails.?
Tried different suggestions, nothing seemed to work. Did not try to delete cache yet.
Click to expand...
Click to collapse
You have not provided
any information about your phone:
1.) What version of OxygenOS do you currently have on your phone?
2.) What is your Phone Model?
[GUIDE] OnePlus 7 Pro [Region] (MODEL)
P.S.
From Android 9 to Android 10 (Official Stock ROM)
First with local upgrade go on OxygenOS 10.0.3
After this, upgrade to the latest version of OxygenOS
Local Upgrade
1.) Download the file OxygenOS 10.0.3 Global OnePlus 7 Pro 2.0 GB and copy it to the root of the internal memory
2.) Go to Settings> System> System Updates> Click the gear at the top right> Local Upgrade> Click on the appropriate installation package> Update
3.) After the update is completed, click Restart
4.) The update was successful.
Note If you do not see the firmware file, then check the file extension should be .zip (if you have .zip.jar just rename it by deleting .jar)
eracet said:
I am rooted and have TWRP installed as well as magisk.
Click to expand...
Click to collapse
Read this first (Procedure with TWRP and Magisk):
Upgraded to Open Beta 16, TWRP and Magisk working!!
@soka said:
Hi,
you cant update to the latest 10 from 9 ... you need to do it incrementally
Click to expand...
Click to collapse
Do you know the easiest way to that?
laikexpert said:
You have not provided
any information about your phone:
1.) What version of OxygenOS do you currently have on your phone?
2.) What is your Phone Model?
[GUIDE] OnePlus 7 Pro [Region] (MODEL)
P.S.
From Android 9 to Android 10 (Official Stock ROM)
First with local upgrade go on OxygenOS 10.0.3
After this, upgrade to the latest version of OxygenOS
Local Upgrade
1.) Download the file OxygenOS 10.0.3 Global OnePlus 7 Pro 2.0 GB and copy it to the root of the internal memory
2.) Go to Settings> System> System Updates> Click the gear at the top right> Local Upgrade> Click on the appropriate installation package> Update
3.) After the update is completed, click Restart
4.) The update was successful.
NoteIf you do not see the firmware file, then check the file extension should be .zip (if you have .zip.jar just rename it by deleting .jar)
Read this first (Procedure with TWRP and Magisk):
Upgraded to Open Beta 16, TWRP and Magisk working!!
Click to expand...
Click to collapse
Sorry did not see earlier.
Here is other information as requested.sorry if I missed anything.
GM1917 model
Oxygen OS 9.5.8.GM21AA
Region US
eracet said:
Sorry did not see earlier.
Here is other information as requested.sorry if I missed anything.
GM1917 model
Oxygen OS 9.5.8.GM21AA
Region US
Click to expand...
Click to collapse
Use Oxygen updater.
https://play.google.com/store/apps/details?id=com.arjanvlek.oxygenupdater
Or
https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585
CosmicInsight said:
Use Oxygen updater.
https://play.google.com/store/apps/details?id=com.arjanvlek.oxygenupdater
Or
https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585
Click to expand...
Click to collapse
Updater didnt work, but ended up booting from local updater after the file was downloaded.
Then I ended up doing local update with the update from oneplus latest.
Now I am working on redoing TWRP. It is sticking on fastboot mode after doing a fastboot boot twrp-3.3.1-4-guacamole.img
Just hope I didnt mess something up when I did the TWRP Magisk A/B retention script.
May try a different TWRP boot img
Newest TWRP worked fine.
ReInstalled Magisk.
All Data and apps are good.
Few minor issues but nothing to serious.
Thanks for all your help !!
eracet said:
Newest TWRP worked fine.
ReInstalled Magisk.
All Data and apps are good.
Few minor issues but nothing to serious.
Thanks for all your help !!
Click to expand...
Click to collapse
I'm glad everything ended well.