Hello everyone and well I have to say I am at my wits end over here.
I have literally just spent hours trying to find the solution without luck. So any help will be greatly appreciated.
I am completely new to android as well and this only makes things much more worse.
I have a Proscan PLT-7035 a cheap tablet by all means and my son accidentally locked the screen under too many password attempts.
I have been trying to factory restore it only to learn this Chinese hardware apparently was not shipped with a recovery option.
This means I cannot put it under USB debugging and I cannot disable mount the mass storage device. So when I connect it to my computer I am able to access all the files but that is it. Honestly it is the biggest 4G usb stick I have ever owned.
Anyway I have tried multiple guides to root and what not as well as I tried multiple button combinations to no avail. It also seems I am able to enter recovery mode by clicking the power button + volume down after shutting the device.
You can hear the sounds in windows of a device being connected and disconnected. There was also an uninstalled driver when i checked Device manager. This is how I was ultimately able to install the drivers as per this guide
It now shows under Android Device as Android Composite ADB Interface.
Now I have tried using Rockchip Batch Tool but It also gets stuck on <Layer 3-3> Test Device Start.
I have tried ICS Root Unlocker and I get error :device not found.
I try adb devices and no devices are listed.
My device is clearly not being detected and I do not know if this is due to driver incompatibility or due to the fact I cannot set the device to USB debugging.
I already disabled driver signature enforcement I'm on Win8Enterprise N x64.
Now someone here was kind enough to upload these and I have absolutely no idea. How to install them or have them run.
So you all can see I've been almost everywhere and in all honesty I have no idea what to do next.
Any lleads will be Godsend. Thanks in advance.
Please let me know if this is in the wrong category. Thanks
Hey guys here is my issue:
Purchased a Verizon S6 that was flashed with CM 5.0.1. I need to restore to a stock rom and somewhere along the flash with ODIN something went wrong. The phone reset and now the phone starts up and goes to the Verizon green screen that mentions something about my system failing to start.
I can't access the recovery menu which includes the wipe cache option. I can access download mode and the Maintenance Boot mode.
Download Mode: When I try to connect it to the computer I get USB device not recognized. I have tried KIES i have tried smart switch. I have installed, uninstalled and reinstalled every USB driver. Device manager shows the phone as Unknown USB Device ( Device Descriptor Request Failed). I have tried 4 different Official Samsung cables and 3 non official. Girlfriends S6 is recognized instantly in download mode. Have tried 4 different machines. Windows 10, Windows 8, Windows 7.I have tried advice from many threads on here for 6 days now with no luck.
Maintenance Mode: Gives me options including wipe system. When I press any option the phone simply resets.
Can't access adb or fastboot, because the computer wont recognize it!
I have suspicions that this phone is " hard bricked ". I am without a phone at the moment and my job relies on it. I found a shop on the other side of the country that fixes hard bricks. I'm hoping this is still fixable via software, if you think you can fix this remotely please contact me! I am willing to pay $50.00 via paypal or square cash. I am on a windows 10 machine with an i7 and team viewer installed. Let me know if you are willing to give it a shot.
You might want to post in the Verizon s6 forum
Hello everybody,
I know there are many threads with broken screens and so on, but I've been searching the internet the whole day & night and tried nearly every solution.
My Smartphone fell on the ground two days ago, I can see everything, but touch isn't working anymore.
Usually I'm rooting my phones but i didn't root my XZ5 so far (big mistake!), so I don't have a custom recovery.
I have USB Debugging activated, but I haven't connected my phone since it updated to the new firmware, so I'm getting RSA Fingerprint Message which I can't allow.
After my Z5 fell on the ground, the fingerprint didn't work so I had to restart my phone - now I'm forced to enter the key to unlock the system.
At first, I tried "Android Control" with adb, but when I connect my phone, adb says "unauthorized" - no remote control possible.
After that, I bought a OTG Cable and plugged in a mouse. This isn't working, because I have to search for a plugged-in USB device first in the settings (the phone doesn't recognize the USB device itself).
Fastboot & Flash Mode are still working.
Is there a possibility to skip RSA Fingerprint with USB debugging or deleting my lock screen? I thought of unlocking my bl and installing TWRP, but then the mobilephone would be wiped as far as I know.
Maybe someone of you knows a "temporary recovery" which can be booted from SD-Card or another way to get to my internal data..
It would be awesome, if someone could help me with this!
Many thanks in advance!
Only way i can think of are to downgrade to lollipop with flashtool without wipe.
Then the usb mouse should start to work directly if im not mistaken.
Atleast i think it was this they before mm upgrade.
Did you try to boot the phone with the mouse connected?
Skickat från min E6653 via Tapatalk
yes, unlocking would completely wipe your phone, including internal memory so it's not a solution.
Rsa key request means you cannot run any adb command right, included adb shell right?
Did you try to do an extensive google search with "broken screen rsa"?
Particularly, http://stackoverflow.com/questions/...b-rsa-key-with-broken-touch-screen-on-android
talks about rebooting in "recovery mode", so you could try to use adb commands in fastboot mode (or download mode)
bobrovsky35 said:
Hello everybody,
I know there are many threads with broken screens and so on, but I've been searching the internet the whole day & night and tried nearly every solution.
My Smartphone fell on the ground two days ago, I can see everything, but touch isn't working anymore.
Usually I'm rooting my phones but i didn't root my XZ5 so far (big mistake!), so I don't have a custom recovery.
I have USB Debugging activated, but I haven't connected my phone since it updated to the new firmware, so I'm getting RSA Fingerprint Message which I can't allow.
After my Z5 fell on the ground, the fingerprint didn't work so I had to restart my phone - now I'm forced to enter the key to unlock the system.
At first, I tried "Android Control" with adb, but when I connect my phone, adb says "unauthorized" - no remote control possible.
After that, I bought a OTG Cable and plugged in a mouse. This isn't working, because I have to search for a plugged-in USB device first in the settings (the phone doesn't recognize the USB device itself).
Fastboot & Flash Mode are still working.
Is there a possibility to skip RSA Fingerprint with USB debugging or deleting my lock screen? I thought of unlocking my bl and installing TWRP, but then the mobilephone would be wiped as far as I know.
Maybe someone of you knows a "temporary recovery" which can be booted from SD-Card or another way to get to my internal data..
It would be awesome, if someone could help me with this!
Many thanks in advance!
Click to expand...
Click to collapse
So I recovered my password from the dust and figured this is my chance to help..
Better be working..
I dropped my z3c while I was holding my newborn baby, it contained all the pictures from birth, ****ing fool I am for not backing up..
Get that short '.. to usb' - thing from the box. Use that to connect your Bluetooth mouse and tada that should work. Use it to unlock your phone and do you what you want to do.
It worked for me, hope I can help you.
my lava pixel v1 is pattern locked .i want to install twrp but my pc doesn't detect the phone in switch off state even when the battery is removed. when it is on , it only charges and does nothing...
I think that i have all the mtk vcom drivers installed as i have flashed my moto c many times.
all i wanna do is remove the pattern.
i think the usb debugging isn't enabled.
aroma file manager isn't flashable in the recovery mode so that i can remove the gesture.key....
my device is android one
android version marshmallow.
shows MT6582 in sp tool scatter file.
Is there any way that i can remove the pattern and if there isn't any please explain me the reason.
but please try your best to come up with a solution.
any help will be appreciated.
please help.Reply fast.
So I am assuming you forgot the lock pattern for your phone or something similar? Here is the thing, most phones encrypt their data when the phone is locked. When the phone gets unlocked ,the data is encrypted. Therefore, if you do not know the lock code or pattern, it is nearly impossible to access the data. The only other option I can think of is if you don't mind your data getting erased, you can go to recovery mode and wipe all the data. Then you would need to go to youtube and look at some FRP bypass methods for your specific phone.
Now if your goal is to simply install twrp, that has to be done in your phone's download mode. Every device has different methods of accessing it.
Hi I'm new to all this I unlocked my boot loader which took ages to do and now I can't seem to flash TWRP I keep getting an error message from my command page saying error cannot load twrp.........img. I am trying to do this so I can install the miui 12 as I really like the look of it. Any help would be greatly appreciated as I'm a complete newbie to all this. Thank you.
Did you keep all your adb-files keep in one folder in the root of your PC? Here are my files, you can copy them into C:/ https://drive.google.com/file/d/1SQB8TVIuc4aCq8PE-62ggm451xey6DC0/view?usp=sharing
Maybe, they will help you. Important: In developer options you have to activate USB-Debigging and OEM-Unlock, also set a password for display lock - best is, to use the same password for your sim and display lock. Often the cables are a problem, if you can´t connect your phone to fastboot. After i changed my cable to an older S8-cable, i have had a stable connection.
If your phone is connected after setting USB-Debugging you must accept it on the phone. Tick also, that it remember this PC.
Wish you good luck.