wanna remove carrier bloatware and boot on my s9 g960u (att) - General Questions and Answers

I have been seeking to remove carrier bloatware and boot screen on my G960U (ATT) and I found out that if I flash U1 (XAA) on my G960U will it remove (ATT) bloatware and boot screen should I risk it?

just make .bat to automate removing bloatware via adb with command "pm uninstall -k --user 0" fast,simple and efficient

Vagueststring said:
I have been seeking to remove carrier bloatware and boot screen on my G960U (ATT) and I found out that if I flash U1 (XAA) on my G960U will it remove (ATT) bloatware and boot screen should I risk it?
Click to expand...
Click to collapse
Boot screen ( logo ) is part of Android's boot.img what is processed by device's bootloader when device boots up: it's NOT a so-called bloatware.

jwoegerbauer said:
Boot screen ( logo ) is part of Android's boot.img what is processed by device's bootloader when device boots up: it's NOT a so-called bloatware.
Click to expand...
Click to collapse
I know that but can I flash xaa u1 firmware on g960u att so csc can be unlocked and boot.img be stock

ineedroot69 said:
just make .bat to automate removing bloatware via adb with command "pm uninstall -k --user 0" fast,simple and efficient
Click to expand...
Click to collapse
can I flash xaa u1 firmware on g960u att via Odin so csc can be unlocked and boot.img be stock but I ll have to disable repartioning it said on a forum so still will it bootloop or boot normally

Vagueststring said:
I know that but can I flash xaa u1 firmware on g960u att so csc can be unlocked and boot.img be stock
Click to expand...
Click to collapse
IDK. Don't own your device.

Vagueststring said:
can I flash xaa u1 firmware on g960u att via Odin so csc can be unlocked and boot.img be stock but I ll have to disable repartioning it said on a forum so still will it bootloop or boot normally
Click to expand...
Click to collapse
Yes, you can do it, of course your device must be carrier unlocked and OEM unlock, USB debugging and those stuffs have to be enabled, you can use some Odin modded to do it in case the normal won´t work. Regarding repartitioning you don´t need to do (usually) nothing so this option is unticked in Odin by default. Use the new CSC contained in the new firmware not the HOME_CSC and this will delete all the bloatware and also the boot splash.

SubwayChamp said:
Yes, you can do it, of course your device must be carrier unlocked and OEM unlock, USB debugging and those stuffs have to be enabled, you can use some Odin modded to do it in case the normal won´t work. Regarding repartitioning you don´t need to do (usually) nothing so this option is unticked in Odin by default. Use the new CSC contained in the new firmware not the HOME_CSC and this will delete all the bloatware and also the boot splash screen
Click to expand...
Click to collapse
so you mean that i cant flash G960U1(unlocked) on G960U(locked) so u1 can be flashed on u1 and u on u

Vagueststring said:
so you mean that i cant flash G960U1(unlocked) on G960U(locked) so u1 can be flashed on u1 and u on u
Click to expand...
Click to collapse
I just warned that this way works fine but always there is some workaround if you follow carefully the steps https://forum.xda-developers.com/t/...th-a-t-mobile-stock-rom.3777035/post-76226613

jwoegerbauer said:
IDK. Don't own your device.
Click to expand...
Click to collapse
bru hahaha

SubwayChamp said:
I just warned that this way works fine but always there is some workaround if you follow carefully the steps https://forum.xda-developers.com/t/...th-a-t-mobile-stock-rom.3777035/post-76226613
Click to expand...
Click to collapse
Thnx bruh my phone is unlocked and got rid of bloatware and att splash screen

Related

Flash only CP?

Can you flash just the CP file? Using the unlocked US firmware but wanted to use the T-Mobile modem. Tried to flash it and it just fails with no error. So are we not able to flash just the CP?
I wouldn't flash t-mobile modem drivers on to universal firmware. This can disable carrier aggregation permanently. Unless you want to use the phone with T-mobile only.
D1G1T4L said:
Can you flash just the CP file? Using the unlocked US firmware but wanted to use the T-Mobile modem. Tried to flash it and it just fails with no error. So are we not able to flash just the CP?
Click to expand...
Click to collapse
Normally yes... But your unlocked US Model is this exynos or snapdragon?
seemcity said:
I wouldn't flash t-mobile modem drivers on to universal firmware. This can disable carrier aggregation permanently. Unless you want to use the phone with T-mobile only.
Click to expand...
Click to collapse
Well it was originally a T-Mobile version. I flashed the unlocked US firmware on it.
maik005 said:
Normally yes... But your unlocked US Model is this exynos or snapdragon?
Click to expand...
Click to collapse
Snapdragon
Ok

[GUIDE] How To Install TWRP & Root Galaxy S8 After Oreo Update

A simple guide for users which will help them to install TWRP on their S8 after Oreo Update.
This guide is only for Exynos models.
Requirement -
1. PC/Laptop
2. Original Samsung USB Type-C Cable
3. Prince Comsy Odin (Because some users reported on this thread that normal Odin doesn't work)
Instructions -
1. Backup your important data from internal storage before proceeding towards the installation.
2. Now go to Settings - About Phone - Software Information - Tap On Build Number 7 Times.
3. Now come back to Settings Home and Open Developer Options. Check OEM Unlock is turned ON.
4. Power off device and boot into download mode.
5. Connect your device to the PC/Laptop.
6. Now Open Prince Comsy Odin and click on the AP option.
7. Choose the TWRP .tar file and press the START button.
8. Now after Odin says PASS, press the VOLUME UP, BIXBY KEY, and POWER BUTTON at the same time until device boots into TWRP recovery.
9. Now allow the modifications and go to WIPE option.
10. Choose FORMAT DATA - Type yes - ENTER.
11. Just Reboot Once Into Recovery Once.
12. Flash no-verity-opt-encrypt.zip.
12. Now Choose INSTALL option and install Magisk or SuperSU.
13. Done!
You can also refer to this video for installation of TWRP - https://www.youtube.com/watch?v=2SqgHFcHLMw
Downloads -
Latest TWRP For Exynos S8 - TWRP 3.2.1-0-DREAMLTE
Prince Comsy Odin - https://drive.google.com/open?id=1enVG5a_ocyjhRlta8AX_0b7LLoHWciVU
No dm-verity - https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Magisk - https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
SuperSU - https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Credits -
@jesec for TWRP
@topjohnwu for Magisk
@Chainfire for SuperSU
Prince Comsy Odin
The main problem is that most users dont have oem unlock after oreo update (e.g me)
EugenStanis said:
The main problem is that most users dont have oem unlock after oreo update (e.g me)
Click to expand...
Click to collapse
Flash this official firmware through Odin if you have Exynos S8, and you'll get OEM unlock option.
I also manually updated to Oreo through this firmware and not through OTA. Also, note that flashing this will not wipe any of your existing data and also will not trip your knox
Ruturaj Kadam said:
Flash this official firmware through Odin if you have Exynos S8, and you'll get OEM unlock option.
I also manually updated to Oreo through this firmware and not through OTA. Also, note that flashing this will not wipe any of your existing data and also will not trip your knox
Click to expand...
Click to collapse
Flashed official XEO for Poland and still OEM unlock isnt there :/
Does the Oreo update affect the the locked bootloader on the Snapdragon version? I thought it was impossible to install TWRP on the Snapdragon versions of the S8?
I have installed but now shows me 0 mb on inernal sotorage , ive tried to change data but nothing cant mount sdcard
EugenStanis said:
Flashed official XEO for Poland and still OEM unlock isnt there :/
Click to expand...
Click to collapse
Try use AQK7 ( 4 file firmware + re-partition PIT)
In my case I 100% success returned form CRAP to AQK7.
OEM unlock is in dev settings, no RMM and FRP.
Powodzenia ^_^
I'm guessing this is not for the US snapdragon variant.
There's no way this can work on US Snapdragon, we don't have a OEM unlock option here.
Tired of the US locked bootloaders.
Next time I'll get a Exynos GS9 for sure.
Will822 said:
I'm guessing this is not for the US snapdragon variant.
Click to expand...
Click to collapse
I'm sorry! It was one of my friends who told me the method is same. I'm sorry again. OP edited
iamnotexisting said:
There's no way this can work on US Snapdragon, we don't have a OEM unlock option here.
Click to expand...
Click to collapse
I'm sorry for that! Edited the OP! Got misguided due to one of my friends
Silenus21 said:
Tired of the US locked bootloaders.
Next time I'll get a Exynos GS9 for sure.
Click to expand...
Click to collapse
Haha yes! Exynos devices are best in performance and battery too.
This method trip knox? I can still use Samsung Pay and other features that require Knox to not be tripped?
168 hours Open my device oem lock on of after twrp flash data storage 0 dm verity flash wipe data
thiagomed said:
This method trip knox? I can still use Samsung Pay and other features that require Knox to not be tripped?
Click to expand...
Click to collapse
TWRP trips Knox if I'm not mistaken.
i did this guide and everything is went good but when i restarted the phone it went to a softbrick and i had to do a restore...
the error was something on the original binary
to have the OEM option, will I have to go back to crap?
I have just tried this method and booted into TWRP but the screen was totally unresponsive, rebooted and still the same. I had to go back to Oreo.
How do I get around this problem?
dr.vetony said:
I have installed but now shows me 0 mb on inernal sotorage , ive tried to change data but nothing cant mount sdcard
Click to expand...
Click to collapse
Wipe / format data - " yes"

S7 edge SM-G935F remove root/ back to stock

Hello all, i have some questions. I owe model S7 edge SM-G935F.
On weekend i tried to flash it and install TWRP and Magisk Manager - manaed to install it and play a round.
Now changed my mind and want to get back to official firmware which i was using before. At the moment i can access TWRP ( i wiped everyting) , but if i boot to system it just stays in ODIN dowload mode ( probably because i wiped everyting)
Before work today i left downloading official rom with latest security patch. After work will flash on official ROM.
After flashing do i need to enable/disable any settings inside phone to receive latter OEM updates? Can i lock bootlader? Or it will be locked automatically when i flash stock firmware.
Thanks
Vinni777 said:
Hello all, i have some questions. I owe model S7 edge SM-G935F.
On weekend i tried to flash it and install TWRP and Magisk Manager - manaed to install it and play a round.
Now changed my mind and want to get back to official firmware which i was using before. At the moment i can access TWRP ( i wiped everyting) , but if i boot to system it just stays in ODIN dowload mode ( probably because i wiped everyting)
Before work today i left downloading official rom with latest security patch. After work will flash on official ROM.
After flashing do i need to enable/disable any settings inside phone to receive latter OEM updates? Can i lock bootlader? Or it will be locked automatically when i flash stock firmware.
Thanks
Click to expand...
Click to collapse
No. If you flash full firmware you will receive oem updates again. You need to unlock developer settings and disable oem unlock to lock bootloader
kpwnApps said:
No. If you flash full firmware you will receive oem updates again. You need to unlock developer settings and disable oem unlock to lock bootloader
Click to expand...
Click to collapse
Thanks for reply. Will do today.
Can i flash using latest odin or i need patched version?
I know its rookie questions, but i was allready stressed to go work without phone as i run out of time yesterday.
Most important for me to get OEM updates and be able use Sam Pay and Etc.
Vinni777 said:
Thanks for reply. Will do today.
Can i flash using latest odin or i need patched version?
I know its rookie questions, but i was allready stressed to go work without phone as i run out of time yesterday.
Most important for me to get OEM updates and be able use Sam Pay and Etc.
Click to expand...
Click to collapse
You need to get the latest odin version because of the lz4 format of the firmware files. Unfortunately you cannot use sampay and knox again because of tripped warranty void
kpwnApps said:
You need to get the latest odin version because of the lz4 format of the firmware files. Unfortunately you cannot use sampay and knox again because of tripped warranty void
Click to expand...
Click to collapse
Thanks mate. I managed yesterday to flash on latest software and everything works perfectly apart Sam Pay and Sam Health Offcourse android pay and etc works fine.

Am I able to flash the U firmware on this Verizon Firmware?

Hello! I was trying to figure out if there was a way to remove the bloatware from this phone, without a root. I might not be able to since my build number is G930VVRSBCTC1, which is the B bootloader. If there is, or you need more info, please notify me. Thank you
TheVideoEffect said:
Hello! I was trying to figure out if there was a way to remove the bloatware from this phone, without a root. I might not be able to since my build number is G930VVRSBCTC1, which is the B bootloader. If there is, or you need more info, please notify me. Thank you
Click to expand...
Click to collapse
The issue with the B bootloader has to do with rooting, not with flashing unbranded firmware through Odin. You just need the correct U firmware and Odin.
You might also need the patched Odin, I can't recall which models require it but some do for flashing from carrier to non-carrier software. Try normal Odin first and if it gives a mismatch error then use patched Odin.
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Drunkpilot said:
The issue with the B bootloader has to do with rooting, not with flashing unbranded firmware through Odin. You just need the correct U firmware and Odin.
Click to expand...
Click to collapse
Well, how would I know which version of the U firmware I would need? Does it need to match my bootloader version?
I'm trying to do the opposite. I have a Verizon S7 that I long ago flashed to the 930U firmware. Now it's being sold, and it will need the 930V firmware. But all of my attempts to flash back to Verizon has failed miserably on every version of Odin I've tried. Not sure where to go next.
To add, I keep getting FAIL! (Auth) errors no matter what I do. I've tried different PCs. Different firmware. Different cables. Nothing.
Some of the firmwares are at different bootloader levels, so if the G930V firmware you're trying to flash is an older bootloader it'll fail. Try flashing everything but BL.
If that doesn't work also try patched Odin as it can bypass some fail messages https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Beanvee7 said:
Some of the firmwares are at different bootloader levels, so if the G930V firmware you're trying to flash is an older bootloader it'll fail. Try flashing everything but BL.
If that doesn't work also try patched Odin as it can bypass some fail messages https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Click to expand...
Click to collapse
Im finally getting around to flashing this, as my dumb phone went into the Verizon software error so why not
TheVideoEffect said:
Im finally getting around to flashing this, as my dumb phone went into the Verizon software error so why not
Click to expand...
Click to collapse
Alright here we go again. My phone gets stopped when it trys to flash the recovery.img in the AP file...

Magisk for Samsung Galaxy a42

Anyone has tried rooting using Magisk? I just bought this last week. I want to modify the CSC feature so that I can enable auto call recording restriction in my country. That needs rooting. I don't care about the warranty. Anyone?
MaXi32 said:
Anyone has tried rooting using Magisk? I just bought this last week. I want to modify the CSC feature so that I can enable auto call recording restriction in my country. That needs rooting. I don't care about the warranty. Anyone? [ouch sorry mod there was a similar question in Q and A section]. Can you delete this ?
Click to expand...
Click to collapse
Have you tried flashing the CSC of a country that does support call recording? Or does the A42 not support call recording in any country?
ShaDisNX255 said:
Have you tried flashing the CSC of a country that does support call recording? Or does the A42 not support call recording in any country?
Click to expand...
Click to collapse
In India a42 supports call recording but in Malaysia it does not. I think flashing CSC requires root access and that is what Magisk is all about from my first question.
Hi guys,I'm interested too for call recorder on Samsung galaxy a42 5g,any ideas?
where i can find is the Firmware for this phone ? (A426BXXU1ATK4) already search in sam mobile and nothing there yet.
Thanks
Found firmware at
SM-A426B | Samsung Galaxy A42 5G | Firmware Download for Spain | PDA/MODEM: A426BXXU1ATK4 | CSC: A426BOXM1ATK4 — Samfrew.com
Samsung Firmware Download, Model: SM-A426B, PDA/AP Version: A426BXXU1ATK4, CSC Version: A426BOXM1ATK4, Region: PHE
samfrew.com
have OEM Unlocked and ready to go, should I be concerned with Qualcomm secure boot: enable?
i have tryed rooting with magisk with Success,
My process was:
had no luck passing all Ap file to the phone, ... "could not read from device"
so I passed boot.img.lz4 in lz4tool, then flashed the boot.img in magisk and packed a tar with vbmeta and recovery and the renamed magisk_patched .img to boot img,
Try to flash via odin in download mode and it fail in ODIN 3.14.
Any one with success?
Please ignore
I edit this it should be some problem with the cable... and my pc Try it again and it worked. with Magisk
*Notice this will void warranty, and I'm not responsible for any damage you may cause or data loss etc...
Process to root with magisk
requirements:
Oem unlock (develpment mode and in bootloader)
ODIN 3.14
Firmware of the image
lz4tool
7zip
Install Magisk manager.
from the image firmware extract from AP the file boot.img.lz4.
pass this in boot img.lz4 in lz4tool and copy to phone the boot.img
Patch it boot.img in magisk manager
copy magisk_patched.img to pc and rename it to boot.img
use 7zip and create a tar "magisk_patched.tar" with the boot.img , vbmeta and recovery ( extract this to from the original fw AP)
In Odin in slot AP load the magisk_patched.tar and in option untick auto reboot and press start
reboot the phone using the combo keys to go to recovery and wipe/factory reset
let it boot and then your done
install magisk manager again if needed and let it set.
MaXi32 said:
In India a42 supports call recording but in Malaysia it does not. I think flashing CSC requires root access and that is what Magisk is all about from my first question.
Click to expand...
Click to collapse
Do you have a CSC with Indian region?
Penmann said:
Do you have a CSC with Indian region?
Click to expand...
Click to collapse
I need call recorder too,if you know from where I can download firmware with Indian region?
Penmann said:
Do you have a CSC with Indian region?
Click to expand...
Click to collapse
I thought in India it's already been enabled by the carrier CSC. BTW, I live in Malaysia. You need to root your phone with Magisk and then edit the CSC feature to enable call recorder. But remember warranty is 100% void.
MaXi32 said:
I thought in India it's already been enabled by the carrier CSC. BTW, I live in Malaysia. You need to root your phone with Magisk and then edit the CSC feature to enable call recorder. But remember warranty is 100% void.
Click to expand...
Click to collapse
How can help me root?
Quick question for those who rooted this phone: once rooted, you lose the ability to use Samsung Pay, don't you?
Mwyann said:
Quick question for those who rooted this phone: once rooted, you lose the ability to use Samsung Pay, don't you?
Click to expand...
Click to collapse
rootadvisor said:
i have tryed rooting with magisk with Success,
My process was:
had no luck passing all Ap file to the phone, ... "could not read from device"
so I passed boot.img.lz4 in lz4tool, then flashed the boot.img in magisk and packed a tar with vbmeta and recovery and the renamed magisk_patched .img to boot img,
Try to flash via odin in download mode and it fail in ODIN 3.14.
Any one with success?
Please ignore
I edit this it should be some problem with the cable... and my pc Try it again and it worked. with Magisk
Click to expand...
Click to collapse
Did it trip KNOX?
rootadvisor said:
*Notice this will void warranty, and I'm not responsible for any damage you may cause or data loss etc...
Process to root with magisk
requirements:
Oem unlock (develpment mode and in bootloader)
ODIN 3.14
Firmware of the image
lz4tool
7zip
Install Magisk manager.
from the image firmware extract from AP the file boot.img.lz4.
pass this in boot img.lz4 in lz4tool and copy to phone the boot.img
Patch it boot.img in magisk manager
copy magisk_patched.img to pc and rename it to boot.img
use 7zip and create a tar "magisk_patched.tar" with the boot.img , vbmeta and recovery ( extract this to from the original fw AP)
In Odin in slot AP load the magisk_patched.tar and in option untick auto reboot and press start
reboot the phone using the combo keys to go to recovery and wipe/factory reset
let it boot and then your done
install magisk manager again if needed and let it set.
Click to expand...
Click to collapse
What procedure did you use to unlock the bootloader?
Thanks!
SO WHAT DO I HAVE TO DO TO BE ABLE TO ROOT MY AMERICAN VERSION A42 G5 I AM BRAND NEW AT THIS ROOTING THING SO PLEASE TAKE IT EASY ON ME LOL I AM GONNA TRY AND ROOT MY NOTE 9 AS WELL
I haven't rooted my phone yet. It's not useful to root yet as the phone is currently powerful and have OTA update for android 12!
I just got my Android 12 on this phone few days ago.
mroohsoogreat68 said:
SO WHAT DO I HAVE TO DO TO BE ABLE TO ROOT MY AMERICAN VERSION A42 G5 I AM BRAND NEW AT THIS ROOTING THING SO PLEASE TAKE IT EASY ON ME LOL I AM GONNA TRY AND ROOT MY NOTE 9 AS WELL
Click to expand...
Click to collapse
Samsung locks bootloaders in the USA so you won't be able to root by regular means
ShaDisNX255 said:
Samsung locks bootloaders in the USA so you won't be able to root by regular means
Click to expand...
Click to collapse
So when you say root by regular means what do you mean because I'm trying to root my American model but I dont know a way to unless I'm able to unlock the bootloader
Knowledgeispower96 said:
So when you say root by regular means what do you mean because I'm trying to root my American model but I dont know a way to unless I'm able to unlock the bootloader
Click to expand...
Click to collapse
I mean that sometimes exploits are found that allow you to gain root access without the need to unlock the bootloader. To this day I've only seen it be done on S8 and S9 so I think your chances of an exploit like that being released are very slim. There were also paid services to gain special tokens that would allow you to unlock the bootloader but those were pretty expensive, at least like 100 USD. And it's been so long that I've seen them I have no clue if they're still in business.

Categories

Resources