hello i have suzuki baleno 2020 and i can't unlock the developer options + unknown sources in my android multimedia system
the system details are here:
Processor type: QuadCore-T3
Android version: 6.0.1
how can i hack that and unlock this? + when i'm trying to enter a pin code it does not actually enter stuff at all... what can i do?
pls help!
Not an MTCD, try Android Head units forum.
marchnz said:
Not an MTCD, try Android Head units forum.
Click to expand...
Click to collapse
thank you, i will try that.
Related
Hi guys,
I have here a fake samsung galaxy s3
After hours of searching I finally figured out that my phone is an MTK.
MTK Soft Ver: 0x1220
MTK HW Ver: MT6250
OS: MTK52D
Model: J5001
I wanted to root this phone but there is no development settings so no usb debugging option either..
Basically I want to put a new OS on this phone but I'm stuck not knowing what else to do to try rooting this phone..
What can I do to put a new OS on it..
Any helpful information would be much appreciated!
Nobody has a clue?
Does it run Android, and if so, what version? If it's 4.2+, then you need to repeatedly tap 'Build Number' in your about phone page of Settings.
Trying...
AmmonRahl said:
Nobody has a clue?
Click to expand...
Click to collapse
Using *#66*# you will find something like this (and factory tests):
VERSION SUMMARY: YLXJ5001_11B_272_Y7_ML10
MCU SW: YLXJ5001_11B_272_Y7_ML10
BB CHIP: MT6250
DSP CODE: 2000.00.00
DSP PATCH: 1.0
MS BOARD: ZHJ5001_11B_HW
BUILD: 2012/12/27
But nothing more to do from this point... This device is a shame for me, I can`t do anything.
-----------
P.S.
You can visit Mediatek's page and see by yourself the low power CPU MT6250 specifications
mediatek.com/_en/01_products/04_pro.php?sn=1062
Dear XDA,
I have a car unit and i need an update method of from where to download, how to instal. Do I even need the newest version? I need help as well how to switch off the rear camera not to be shown on the screen! So here are the details that you may need to know.
Mercedes Benz B180 CDI w245
Model number: A-MEDIA AUTO (1024x600 W)
Android version: 6.0.1
Kernel version: 3.10.0 [email protected] #1019
Build-number: px5-userdebug 6.0.1
CPU: 8 core 64bit CPU Coretex-A53 @ 1.5G
RAM: 2GB
Thank you in advance
What do you mean not show the rear camera on the screen? If you mean so it automatically comes on in reverse and off when your not that's down to wiring not software.
The latest firmware is available in the software development section or you can run malysiks Rom which is also in the software development section along with instructions on how to install it
Sent from my SM-G960F using Tapatalk
Mr.R™ said:
What do you mean not show the rear camera on the screen? If you mean so it automatically comes on in reverse and off when your not that's down to wiring not software.
The latest firmware is available in the software development section or you can run malysiks Rom which is also in the software development section along with instructions on how to install it
Sent from my SM-G960F using Tapatalk
Click to expand...
Click to collapse
I would like to deactivate the display rear camera when in reverse. I do not have a back camera to display on my screen therefore i would like to disable that function of course if its possible.
Settings > car > factory settings (pass 126) and it'll be under one of those tabs
Sent from my SM-G960F using Tapatalk
camera question all set!
thank you very much for the camera settings its working ? now i just have to find time for the updates. i will try to do it today
Dear Mr.R.
i found the links that you mentioned above about the updates, however there is millions of files to download i'm really not sure wich one i should download. Other than this there will be no questions about the head unit... unless i cant install but that should be a piece of cake. I just need the correct files to download.
Thank you
Hi
I need recovery.img file for my mtcd
it is RM h-772
android px5-userdebug 6.0.1 MXC89L
A-MEDIA AUTO (1024x600 O)
Kernel versio
3.10.0
[email protected] #1294
the attached image is for my recovery screen before I deleted it
Thanks
sa3aad said:
Hi
I need recovery.img file for my mtcd
it is RM h-772
android px5-userdebug 6.0.1 MXC89L
A-MEDIA AUTO (1024x600 O)
Kernel versio
3.10.0
[email protected] #1294
the attached image is for my recovery screen before I deleted it
Thanks
Click to expand...
Click to collapse
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 6.1
The link have many different MTCE GS,HA,KGL,KLD,LM,MX,XRC.
which one should i choose?
My MCU is MTCE_CZ_V2.77
ennysubo said:
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 6.1
Click to expand...
Click to collapse
vegechuang said:
The link have many different MTCE GS,HA,KGL,KLD,LM,MX,XRC.
which one should i choose?
My MCU is MTCE_CZ_V2.77
Click to expand...
Click to collapse
You can use any of then. I recommend MX or HA.
ennysubo said:
You can use any of then. I recommend MX or HA.
Click to expand...
Click to collapse
No! Why do you write such false statements? He must take MTCE_CZ!
Please edit your comment.
Thanks for your mention,
Does anyone could offer me the right recovery.img?
Ati_gangster said:
No! Why do you write such false statements? He must take MTCE_CZ!
Please edit your comment.
Click to expand...
Click to collapse
Ati_gangster said:
No! Why do you write such false statements? He must take MTCE_CZ!
Please edit your comment.
Click to expand...
Click to collapse
This guy not found mcu but recovery image. MCU must be CZ recovery image can use any of android 6.
I have a PX5 MX android 6(original) device. On this device I have tried all versions of android 6,,8 and now already 9. I tried image from HA, GS, CHS and many others. Everything is made from the original version with pre-application and changed theme.
ennysubo said:
This guy not found mcu but recovery image. MCU must be CZ recovery image can use any of android 6.
I have a PX5 MX android 6(original) device. On this device I have tried all versions of android 6,,8 and now already 9. I tried image from HA, GS, CHS and many others. Everything is made from the original version with pre-application and changed theme.
Click to expand...
Click to collapse
I'm aware of that. But you've written it so that they're all fully compatible, so software and MCU, and they're not. There are many here who can misunderstand that.
Software yes.
MCU must correspond to the respective manufacturer.
Hi,
I have an Eonon GA9156A.
The original data was:
Build:
px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20180522.143630 test-key
MCU Version:
MTCE_WWW_V20.85d_1
May 21 2018 18:13:41
Model
px5(1024x600)
I've installed the Hal9k (8.0) Rom and all was ok.
I've tryed to update to the Malaysk 9.0 Rom but someting was wrong. The recovery isn't installed correctely and the system not booting on.
Someone could tell me what is the correct recovery for my device?
Please send me also a guide to competely restore the radio.
Thanks
Razzox said:
Hi,
I have an Eonon GA9156A.
The original data was:
Build:
px5-userdebug 8.0.0 OPR5.170623.007 eng.hct.20180522.143630 test-key
MCU Version:
MTCE_WWW_V20.85d_1
May 21 2018 18:13:41
Model
px5(1024x600)
I've installed the Hal9k (8.0) Rom and all was ok.
I've tryed to update to the Malaysk 9.0 Rom but someting was wrong. The recovery isn't installed correctely and the system not booting on.
Someone could tell me what is the correct recovery for my device?
Please send me also a guide to competely restore the radio.
Thanks
Click to expand...
Click to collapse
Follow this instruction.
https://youtu.be/34GSX5aId8Q
Ati_gangster said:
Follow this instruction.
https://youtu.be/34GSX5aId8Q
Click to expand...
Click to collapse
Thank you. I've resolved.
hello everyone sorry for my appoximative English, I have an Amedia car radio mtcd_lm in my bmw x5 e53, I updated with a bad file and since the steering wheel controls no longer work ....
everything else works perfectly.
would be really nice to help me!
I no longer remember the version I had of origin it was mtcd_lm v ????
Hey, i'm a lucky owner of my Seicane Head Unit for my old Honda Jazz.
I'm looking for a MCU file of my HU.
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
If anyone can help with MCU file (or provide a list of file which is fully complatible with current one) i will really appreciate it.
LordBel said:
Right now i have MTCP_HF_V3.30_1 version
It's Android 9, PX5 device
Click to expand...
Click to collapse
mmm... MTCP? not MTCE?
Compatibility with MTCD/MTCE (this forum section) is not very clear...
BTW, this section is for the software development... you should ask in the general sections...
themissionimpossible said:
mmm... MTCP? not MTCE?
Click to expand...
Click to collapse
Yes, MTCP. As far as i understand P - is for 8-channel audio. Maybe there are some other differences, but this is the one i'm aware of.
Can you please share what you have? i will try to check if it can be flashed on my HU.
Thanks!
I have a MTCE_HF with MCU v. 3.30 (the latest known on the net), but I suspect it's not compatible with your HU, but anyway you have already a v 3.30, even if it's a v. 3.30_1 (for MTCP?).
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
Hi, I just bought a chinese Android Radio, I was looking for MCU updates or rooting it but after hours of searching for a fitting MCU i couldnt find anything. I dont have any expierence with Android Head units, so maybe im looking in the wrong places. I was hoping someone on here could help me out.
Edit: CPU says it is a UIS7862 if it helps
Requested moderator move to FYT forum.
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Why MCU update. It's discussed in the forum, and you the a very up to date version - more recent than mine. Are you confusing MCU to Android?
hynnes said:
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Click to expand...
Click to collapse
Check your FYT version with https://github.com/hvdwolf/JoyingBinRepo/raw/master/HWGet_info/HWGetInfo.apk . Read "ro.build.fytmanufacturer=" . YIN is normally 116.
Then read full post #1 and #2 of @surfer63 here
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
bluemask69 said:
Check your FYT version with https://github.com/hvdwolf/JoyingBinRepo/raw/master/HWGet_info/HWGetInfo.apk . Read "ro.build.fytmanufacturer=" . YIN is normally 116.
Then read full post #1 and #2 of @surfer63 here
General FYT based Spreadtrum uis7862(s) (unisoc ums512) & uis8581a (sc9863) - Q&A, Mods, tips, firmware
Last revised: 07 June 2023 (reason: added info for the uis8581a) This thread tries to be a "one fits all" thread about FYT based Spreadtrum Unisoc uis7862(s) (Unisoc ums512) and uis8581a (sc9863) head units and its software, modded or not. The...
forum.xda-developers.com
Click to expand...
Click to collapse
This awnserd a lot of my questions, thank you
I also need this MCU (YIN). Does any friend have a new one to provide
hynnes said:
Hi, I just bought a chinese Android Radio, I was looking for MCU updates or rooting it but after hours of searching for a fitting MCU i couldnt find anything. I dont have any expierence with Android Head units, so maybe im looking in the wrong places. I was hoping someone on here could help me out.
Edit: CPU says it is a UIS7862 if it helps
Click to expand...
Click to collapse
Hello, do you have the file of your MCU
Can you provide it if any?
Jerry ming said:
Hello, do you have the file of your MCU
Can you provide it if any?
Click to expand...
Click to collapse
What do you mean? Do you need the Android firmware or the low-level MCU firmware? And if you need the low-level firmware: what is your manufacturer id?
And don't put your email address in if you don't want to get spammed by all kind of mail bots. Besides: a 1.3 GB firmware can't be sent via email anyway.
Jerry ming said:
Hello, do you have the file of your MCU
Can you provide it if any? [email protected]
Click to expand...
Click to collapse
choose the firmware according to the type of radio screen you have, I had flashed it by mistake on my radio which is a FYT NOR and not a FYT YIN (and on restarting the radio a warning green bar indicated that it was only for YIN).
Support / Software Download Address
7862 7inch/8inch
7862/9" 10"
7862-9"-10"-360
The latest MCU is required
surfer63 said:
What do you mean? Do you need the Android firmware or the low-level MCU firmware? And if you need the low-level firmware: what is your manufacturer id?
And don't put your email address in if you don't want to get spammed by all kind of mail bots. Besides: a 1.3 GB firmware can't be sent via email anyway.
Click to expand...
Click to collapse
Jerry ming said:
View attachment 5770659The latest MCU is required
Click to expand...
Click to collapse
On 4pda they have more MCU firmares, but it is not allowed to put links in XDA to 4pda.
surfer63 said:
On 4pda they have more MCU firmares, but it is not allowed to put links in XDA to 4pda.
Click to expand...
Click to collapse
Hey, i tried backing up my firmware with the guide you gave in your post, i plugged in my usb stick which does not have any other files than the backup files. Rebooted the thing, but it just startet like normal. Do i need to select a boot via usb stick ?
hynnes said:
Hey, i tried backing up my firmware with the guide you gave in your post, i plugged in my usb stick which does not have any other files than the backup files. Rebooted the thing, but it just startet like normal. Do i need to select a boot via usb stick ?
Click to expand...
Click to collapse
No, it should immediately work.
Can you do a listing of your USB-stick and show it here?
hynnes said:
I should also add that i cannot acceces my system settings, it requieres me to put in a 4 digit code, which i dont have. Factory reseting the unit didnt work either, it just restarts everytime i try. Is there anything i can do ?
Click to expand...
Click to collapse
Add a clean data file to upgrade. The file name updatecfg is