t-mobile note20 ultra to at&t - Samsung Galaxy Note 20 Ultra Questions & Answers

I usually buy unlocked notes, but this time ended up with t-mobile note20 ultra 5g.
Can i able to convert to at&t, by just flashing home_csc or need to flash a full at&t firmware? (if it is even allowed!)

mawin said:
I usually buy unlocked notes, but this time ended up with t-mobile note20 ultra 5g.
Can i able to convert to at&t, by just flashing home_csc or need to flash a full at&t firmware? (if it is even allowed!)
Click to expand...
Click to collapse
Is it locked or unlocked?
You can change csc from tmobile to att. I was able to do that using instructions from https://forum.xda-developers.com/t/...bands-and-services-5g-low-band-on-u1.4182293/
Pls note, with One UI 3.1 update, some codes don't work on some phones.

mindseye0803 said:
Is it locked or unlocked?
You can change csc from tmobile to att. I was able to do that using instructions from https://forum.xda-developers.com/t/...bands-and-services-5g-low-band-on-u1.4182293/
Pls note, with One UI 3.1 update, some codes don't work on some phones.
Click to expand...
Click to collapse
It is tmo locked, requested unlocking via twitter few days ago, still waiting.
Current firmware is N986USQU1BTJ4, but it is trying to push for a new update (by tomorrow morning). Dont want to get this too high and stuck.

i flashed N986USQU1DUB5 from "OTA and Non-OTA Firmware for N986U and N986U1" thread and used CSC file (instead of home csc) as my phone is blank. It did not do the factory reset/still showing tmobile only !
tried *#272*imei# to see if i can check the csc manually, but nothing happens ! - may be what @mindseye0803 already said as oneui3.1 !, will check by downgrade and see !
re flashed N986USQU1DUB5 with csc/userdata, it solved my issue, can see and enable wifi calling from at&t.

mawin said:
i flashed N986USQU1DUB5 from "OTA and Non-OTA Firmware for N986U and N986U1" thread and used CSC file (instead of home csc) as my phone is blank. It did not do the factory reset/still showing tmobile only !
tried *#272*imei# to see if i can check the csc manually, but nothing happens ! - may be what @mindseye0803 already said as oneui3.1 !, will check by downgrade and see !
re flashed N986USQU1DUB5 with csc/userdata, it solved my issue, can see and enable wifi calling from at&t.
Click to expand...
Click to collapse
Where did you get the ATT user data file?

Related

General G996U and G996U1 Firmware Links and Flashing Discussion Here

For those who aren't already aware, G996U is the model number of all of the US carrier versions of the S21+. The G996U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among these models: any U or U1 firmware version can be flashed to any U or U1 device at any time, assuming that you're not trying to downgrade the bootloader. A "U to U" or "U1 to U1" flash does not require a factory reset, but changing from one firmware to the other will require one. Also, U firmware is identical for the 4 base files (AP, BL, CP, CSC) for each individual build, no matter which carrier it comes from. So if you download 2 different carrier versions of the exact same build, the 4 base files will be identical. Where the firmware differs is in the USERDATA file - that's where the carrier bloatware and customizations reside.
Manual Odin flashing is designed for those who:
- want to manually update to a newer version of U firmware on their U device, either because they don't want to wait for their carrier's OTA or because OTAs aren't working on their device, or a different carrier got a new feature/patch before they did
- want to flash U1 firmware to their U device
- want to convert from U1 firmware to carrier U firmware
- want to convert from one carrier's U firmware (with all apps and bloatware) to a different carrier's U firmware (with all apps and bloatware)
For those who aren't already aware, anyone can now download firmware for almost any Samsung device any time that they want, via the various firmware download tools posted here on XDA like SamFirm or Frija. There are threads and info about them here on XDA so I won't waste time explaining - do a search if you're not already familiar with these tools. But they only provide whatever the latest/newest/current version is - nothing older. I pay for a subscription to a site that gets the official releases (usually) before they hit the firmware download tools, so that's where my files come from.
This is not a "beginner's guide to Odin flashing" -type post/thread, so I won't list basic, step-by-step flashing instructions. My threads are geared towards those who already know what they're doing. If you're new to manually flashing Samsung firmware (or haven't done it in a long time), I recommend you consult one of those "beginner's" guides- there are tons of them here on XDA.
Happy flashing!
U firmware: https://www.androidfilehost.com/?w=files&flid=322091
U1 firmware: https://www.androidfilehost.com/?w=files&flid=322092
Notes:
- DON'T QUOTE THE OP WHEN YOU REPLY, kthx
- I have lots of threads just like this one for other Samsung flagships, if it interests you. For those who have already made use of my previous threads for a different device and are upgrading to an S21, welcome back
- My zips are compressed extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- it's quite time consuming to download the files, zip them up, and upload them to AFH. And, I do threads like this for every single Sx and Note x model, so I won't be uploading every single version. The only full builds that I upload are ones where I get access to a new bootloader and/or Android version early, before they hit the firmware download tools.
- My naming method for folders on AFH is: build - bootloader - Android version
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and it's Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data. Flashing USERDATA will also wipe data.
- Since AT&T doesn't allow their firmware to be publicly available (for any of their devices), I'll try to always upload at least one USERDATA per bootloader increment for AT&T (and Cricket, if they get this model). I'll also upload any full builds if AT&T is the only carrier to get that specific build, because you won't be able to find the files anywhere else.
- For identifying USERDATAS, and to know what region/CSC to use in the firmware download tools if you're downloading yourself:
AIO = Cricket (not available via firmware download tools)
ATT = AT&T (not available via firmware download tools)
BST = Boost Mobile
CCT = Xfinity Mobile (Comcast)
CHA = Spectrum Mobile (Charter)
DSH = Dish Network
SPR = Sprint
TMB = T-Mobile
TMK = Metro PCS
USC = US Cellular
VZW = Verizon (available via firmware download tools, but Manual Entry is required - Auto will not work)
XAA = U1 firmware
- the correct procedure for switching from one carrier's firmware to another is:
1. Flash full U1 firmware package including non HOME CSC
2. Upon boot, insert a SIM of the carrier whose firmware you want
3. Watch for the popup that says "reboot to apply new carrier settings" etc, and do it
4. After that restart completes, reboot back to Download mode and flash the full U firmware package, with the USERDATA file of the carrier whose firmware you want
Initial U firmware and AT&T USERDATA are posted, along with U1 firmware. U firmware is not yet accessible in the firmware download tools like SamFirm and Frija, but if anyone wants a different carrier's USERDATA (for flashing bloatware to a U1 device or for converting a U device from one carrier's bloatware to a different one), let me know and I'll get it for you
Are the firmware in OP compatible for the S21 (Non-plus)?
craznazn said:
Are the firmware in OP compatible for the S21 (Non-plus)?
Click to expand...
Click to collapse
This thread is in the S21+ forum, not the S21 forum.
This thread is for model numbers G996U and G996U1, not G991U or G991U1.
If you're looking for S21 firmware, that will be found in the S21 forum
I agree with you
Does the firmware control the SIM lock? So, can you flash the U1-XAA firmware and use say a phone purchased from AT&T on another carrier? Or do you need to do the SIM unlock before flashing?
3BeersKen said:
Does the firmware control the SIM lock? So, can you flash the U1-XAA firmware and use say a phone purchased from AT&T on another carrier? Or do you need to do the SIM unlock before flashing?
Click to expand...
Click to collapse
SIM unlock always goes much deeper than firmware. Flashing U1 will never automatically unlock any model - the unlock has to be done separately. If desired, I can provide a recommendation for a professional 3rd party business to do the unlocking, for any interested users who may not meet the carrier's unlock requirement(s).
Thanks. That's what I figured, but wanted to make sure. I like to get off of the AT&T firmware as quickly as possible as you can't get their updates unless you have an active SIM in the phone.
3BeersKen said:
You can't get their updates unless you have an active SIM in the phone.
Click to expand...
Click to collapse
Correct. They're A-holes like that haha
iBowToAndroid said:
Correct. They're A-holes like that haha
Click to expand...
Click to collapse
I got TMobile s21+ and want flash to u1,do you know which odin should I use, thanks
yijinsa said:
I got TMobile s21+ and want flash to u1,do you know which odin should I use, thanks
Click to expand...
Click to collapse
3.14.1 patched
I don't have my S21+ yet but it will be here soon. I ordered from Samsung and selected the Verizon version as unlocked was considerably more expensive.
Does anyone know what Verizon specific bloatware the S21+ has?
Are there certain apps which can be uninstalled with the U1 version but not the Verizon U version?
Are there any potential speed benefits on the 5G network that would be lost using the U1 version, or features like tethering that won't work?
For updates in the future, would they arrive faster on the U1 version, slower, or the same?
My main purpose in flashing from U to U1 is to free up the maximum amount of space of the 128 GB while still retaining 100% of the speed and features I would have with the Verizon version.
Thank you for educating me! It's been a couple years since I flashed my Note 8.
I order a unlocked S21+ U1 version straight from Samsung and didn't have to put in any VZW info.
There is a buttload of Samsung bloatware but no VZW except fot MyVZX
Have anyone here with T-mobile version stuck on TMB/TMB/TMB after going to U1 firmware?
Someone over S21 Ultra have this problem, but I'm not sure if Android 11 tinker or T-mobile side. Used to be XAA/XAA/TMB
x1tymez said:
Have anyone here with T-mobile version stuck on TMB/TMB/TMB after going to U1 firmware?
Someone over S21 Ultra have this problem, but I'm not sure if Android 11 tinker or T-mobile side. Used to be XAA/XAA/TMB
Click to expand...
Click to collapse
Yes, that seems to be a common issue with T-Mobile S21s - all 3 models
iBowToAndroid said:
Yes, that seems to be a common issue with T-Mobile S21s - all 3 models
Click to expand...
Click to collapse
You think there will be a fix for this? It's weird that dialer codes also don't work.
x1tymez said:
Have anyone here with T-mobile version stuck on TMB/TMB/TMB after going to U1 firmware?
Someone over S21 Ultra have this problem, but I'm not sure if Android 11 tinker or T-mobile side. Used to be XAA/XAA/TMB
Click to expand...
Click to collapse
I've got a T-Mobile locked that I was able to get flashed over to U1 without much trouble. Shows mode number SM-G996U1 now, build number shows same.
edit: Nevermind, I see the TMB/TMB/TMB
krisology said:
You think there will be a fix for this? It's weird that dialer codes also don't work.
Click to expand...
Click to collapse
Dialer codes don't work? On which firmware?
iBowToAndroid said:
Dialer codes don't work? On which firmware?
Click to expand...
Click to collapse
XAA U1, VZW U1, stock TMB U, and I've tried the TLI U1 above and couldn't get it to work. Using google dialer, I input the codes like *#*#27262826#*#* and as soon as I type the last star it just disappears and nothing pops up. I tried with T-Mobile and Verizon sim.
krisology said:
XAA U1, VZW U1, stock TMB U, and I've tried the TLI U1 above and couldn't get it to work. Using google dialer, I input the codes like *#*#27262826#*#* and as soon as I type the last star it just disappears and nothing pops up. I tried with T-Mobile and Verizon sim.
Click to expand...
Click to collapse
Dialer codes usually don't work on VZW firmware, whether U or U1. But they almost always work on TMB and all others.
Have you tried *#06# ?

Since CSC change is not possible with latest UI 3.1 update what are options to change CSC

HI all,
With CSC change not possible using codes with latest UI 3.1 update what are options to change CSC?
For ex. I have SM-N986U unlocked Tmobile device but i changed CSC to ATT as im currently using ATT Prepaid and I'm on latest Apr update for ATT
How can i revert back to Tmobile CSC?
Do i need to flash Tmobile firmware using ODIN by first flashing to U1 firmware then Tmobile firmware or can i directly flash Tmobile latest firmware with Apr update using ODIN?
Will i be able to retain my app and data if I flash Tmobile firmware?
Any help will be appreciated.
Thanks
So you state csc change not possible then ask how to change it? lol.. and if it were as easy to just flash firmware in odin tgen that wouldve been the way to do it to begin with I would think lol
Update:
I was able to change CSC(ATT/ATT/TMB) to TMB/TMB/TMB but it was long and winded way. Just flashing firmware was not enough , need Tmobile sim to install carrier service and change CSC.
I followed the steps below:-
1) Did backup of my device using Smart Switch and removed my ATT sim.
2) Flashed latest T-Mobile firmware( N986USQU2DUC8 ) using instructions from post - https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/ . Also, downloaded the ODIN (patched version) and T-Mobile firmware from links in the post. Flashed HOME_CSC too.
3) After rebooting phone with new firmware , the boot up screen was still ATT and CSC was still ATT/ATT/TMB.
4)Shut down phone and inserted Tmobile SIM i had lying around.
5) On reboot, i was asked to install Tmobile carrier services and on restart , Tmobile logo came on boot up with CSC changed to TMB/TMB/TMB.
6) Now, i have esim enabled and SIM manager showing up too.
mindseye0803 said:
Update:
I was able to change CSC(ATT/ATT/TMB) to TMB/TMB/TMB but it was long and winded way. Just flashing firmware was not enough , need Tmobile sim to install carrier service and change CSC.
I followed the steps below:-
1) Did backup of my device using Smart Switch and removed my ATT sim.
2) Flashed latest T-Mobile firmware( N986USQU2DUC8 ) using instructions from post - https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/ . Also, downloaded the ODIN (patched version) and T-Mobile firmware from links in the post. Flashed HOME_CSC too.
3) After rebooting phone with new firmware , the boot up screen was still ATT and CSC was still ATT/ATT/TMB.
4)Shut down phone and inserted Tmobile SIM i had lying around.
5) On reboot, i was asked to install Tmobile carrier services and on restart , Tmobile logo came on boot up with CSC changed to TMB/TMB/TMB.
6) Now, i have esim enabled and SIM manager showing up too.
Click to expand...
Click to collapse
thats the normal process.. that firmware is same for each carrier.. firmware is multi csc which changes based on sim inserted.. shouldnt have to go through all of that really.. i think most ppl who have issues are trying to change csc without a active sim card or on carrier locked devices etc.
glad u figured it out tho!
elliwigy said:
thats the normal process.. that firmware is same for each carrier.. firmware is multi csc which changes based on sim inserted.. shouldnt have to go through all of that really.. i think most ppl who have issues are trying to change csc without a active sim card or on carrier locked devices etc.
glad u figured it out tho!
Click to expand...
Click to collapse
Well, the confusion for most ppl who are new to Samsung and CSC, like me , is that we could change CSC with code earlier and now cannot. Didn't have these issues with pixel and iPhone.
mindseye0803 said:
Well, the confusion for most ppl who are new to Samsung and CSC, like me , is that we could change CSC with code earlier and now cannot. Didn't have these issues with pixel and iPhone.
Click to expand...
Click to collapse
pixel and iphone dont have multi csc like samsung does.. just curious, when were u able to change csc with code earlier if ur new to samsung? lol
elliwigy said:
pixel and iphone dont have multi csc like samsung does.. just curious, when were u able to change csc with code earlier if ur new to samsung? lol
Click to expand...
Click to collapse
Yes, I was able to change CSC to ATT from TMobile, enable all LTE/5G bands before One UI update.Not, sure what u find so funny .
Yes, I'm aware that there is no CSC concept in pixel or iPhone or any other other manufacturer that I'm aware nor they are crippled in terms of hardware capability from carrier software like Samsung. LTE/5G bands not being enabled , esim not being enabled etc.
mindseye0803 said:
Yes, I was able to change CSC to ATT from TMobile, enable all LTE/5G bands before One UI update.Not, sure what u find so funny .
Yes, I'm aware that there is no CSC concept in pixel or iPhone or any other other manufacturer that I'm aware nor they are crippled in terms of hardware capability from carrier software like Samsung. LTE/5G bands not being enabled , esim not being enabled etc.
Click to expand...
Click to collapse
actually other devices are crippled in some cased disabled entirely.. for example u cant get a tmb oneplus 9 pro 5g and use it on verizon to get 5g bcuz vzw 5g bands are disabled in tmb variant..
its really the carriers to be honest..
and I say LOL all the time even in normal convo so not actually laughing sometimes, just say it out of habit
elliwigy said:
actually other devices are crippled in some cased disabled entirely.. for example u cant get a tmb oneplus 9 pro 5g and use it on verizon to get 5g bcuz vzw 5g bands are disabled in tmb variant..
its really the carriers to be honest..
and I say LOL all the time even in normal convo so not actually laughing sometimes, just say it out of habit
Click to expand...
Click to collapse
I have phones such as Z Flip3 5G and other models that do not change CSC like older models when following the flash procedure starting with U1, but the phones never prompt a restart. I have noticed it seems to be with TMB or VZW units. Any suggestion on how to actually get the CSC to change properly or is this something they are doing with new phones to avoid being able to use them fully on other carriers?
yygemmi770 said:
I have phones such as Z Flip3 5G and other models that do not change CSC like older models when following the flash procedure starting with U1, but the phones never prompt a restart. I have noticed it seems to be with TMB or VZW units. Any suggestion on how to actually get the CSC to change properly or is this something they are doing with new phones to avoid being able to use them fully on other carriers?
Click to expand...
Click to collapse
SamKey.org
Go to the page, download theirs Samkey app, buy few credits on Ebay and you can change the CSC as you wish in a minute, the phone will reboot without loosing your data, it's the easiest way as far as I know
Hi, I have yhe following issue and I need your thoughts please.
I have a Telus plan, canadian with US roaming option.
I am traveling in US alot. I have a Note 20 Ultra U1 from Samsung USA. When in US I can only register on Tmobile and I can get 5G icon too. Won't let me on ATT or Verizon.
With same sim card in Note20 Ultra "W" variant, canadian one, it wil register on all 3 major networks in US. No issues with the sim, I guess.
Also in Canada won't get 5G ever.
My provider said nothing to do with them, Samsung told me the same.
I reseted all network setings my APN is ok. VOLTE on. Only getting acces to Tmobile.
Any ideea how I can fix this ? Is it related to CSC ? Mine is XAA.
mindseye0803 said:
Update:
I was able to change CSC(ATT/ATT/TMB) to TMB/TMB/TMB but it was long and winded way. Just flashing firmware was not enough , need Tmobile sim to install carrier service and change CSC.
I followed the steps below:-
1) Did backup of my device using Smart Switch and removed my ATT sim.
2) Flashed latest T-Mobile firmware( N986USQU2DUC8 ) using instructions from post - https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/ . Also, downloaded the ODIN (patched version) and T-Mobile firmware from links in the post. Flashed HOME_CSC too.
3) After rebooting phone with new firmware , the boot up screen was still ATT and CSC was still ATT/ATT/TMB.
4)Shut down phone and inserted Tmobile SIM i had lying around.
5) On reboot, i was asked to install Tmobile carrier services and on restart , Tmobile logo came on boot up with CSC changed to TMB/TMB/TMB.
6) Now, i have esim enabled and SIM manager showing up too.
Click to expand...
Click to collapse
So I have a Verizon phone and I switched to t-mobile. If I use this method to switch my csc would that lock my phone or would it stay unlocked?
Stevieboy02008 said:
So I have a Verizon phone and I switched to t-mobile. If I use this method to switch my csc would that lock my phone or would it stay unlocked?
Click to expand...
Click to collapse
Unlocked. Phone once unlocked will not lock to any carrier.
dadmi said:
Unlocked. Phone once unlocked will not lock to any carrier.
Click to expand...
Click to collapse
Thank you

(HELP)SM-N986U1 change CSC to TMB - Enable ESIm

Hey Everyone,
I have unlocked SM-N986U1 with the latest update installed (Updated with latest June update). I wanted to change my CSC to TMB (T-Mobile) so as to enable ESeim support. I tried using Samkey, wasted 1 credit too. It said CSC updated but nothing happened, my carrier still shows XAA.
Can anyone please guide me on how can I change CSC to TMB?
Thanks.
dawinner said:
Hey Everyone,
I have unlocked SM-N986U1 with the latest update installed (Updated with latest June update). I wanted to change my CSC to TMB (T-Mobile) so as to enable ESeim support. I tried using Samkey, wasted 1 credit too. It said CSC updated but nothing happened, my carrier still shows XAA.
Can anyone please guide me on how can I change CSC to TMB?
Thanks.
Click to expand...
Click to collapse
These links'could help. I think you have to flash the TMB Rom which enables and support the eSim on the phone. It would help to have a Tmobile Sim around during this process but I have heard others say it is not needed.
Note 20 Ultra eSIM update is here!! (T-mobile USA)
Guys, FINALLY!!! Woohoo! We have eSIM support on Note 20 Ultra US Snapdragon version for T-mobile. There is an OTA you can download and then convert your physical SIM to eSIM :)
forum.xda-developers.com
[Guide] - eSim Firmware Flash/ Odin Upgrade/ Flashing and N986U to N986U1 & Vice Versa
Instructions are updated to get eSIM INTRODUCTION - Firstly sorry for posting this as this is common knowledge for many. I still see so many people asking the same questions again and again and i do want to help so decided to write a guide. If...
forum.xda-developers.com
Mbetu said:
These links'could help. I think you have to flash the TMB Rom which enables and support the eSim on the phone. It would help to have a Tmobile Sim around during this process but I have heard others say it is not needed.
Note 20 Ultra eSIM update is here!! (T-mobile USA)
Guys, FINALLY!!! Woohoo! We have eSIM support on Note 20 Ultra US Snapdragon version for T-mobile. There is an OTA you can download and then convert your physical SIM to eSIM :)
forum.xda-developers.com
[Guide] - eSim Firmware Flash/ Odin Upgrade/ Flashing and N986U to N986U1 & Vice Versa
Instructions are updated to get eSIM INTRODUCTION - Firstly sorry for posting this as this is common knowledge for many. I still see so many people asking the same questions again and again and i do want to help so decided to write a guide. If...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for the link to guide. I was going through it and there is a warning on the top saying if you have Bootloader 2 you won't be able to flash U firmware on U1. I believe as I have all the latest updates I wont be be able to flash it.
Thanks for your help.
dawinner said:
Thanks for the link to guide. I was going through it and there is a warning on the top saying if you have Bootloader 2 you won't be able to flash U firmware on U1. I believe as I have all the latest updates I wont be be able to flash it.
Thanks for your help.
Click to expand...
Click to collapse
Yes you can. My device is from Xfinity and I have done the switch to any Carrier I choose on bootloader 2. U1 to U and back is doable. The key is to use the modified Odin as specified in the guide.
"
2. Download Patched Odin here
3. Unpack/Unzip what you downloaded in Step 2 (Odin Compatible ROm) and put in a folder. Lets call the folder "Flash"
4. Run Odin, click on BL, Browse to the "Flash" folder, add BL file from there, Do the same for AP (click on AP, Add AP file, this will take some time), Same for CP (click on CP, Add CP file)
5. Do the same for CSC (click on CSC, Add the file with the name starting with Home_CSC). If you use Home_CSC your phone will not get formatted and data will remain Intact
USERDATA Stays empty.
6. Now connect USB cable to your laptop (Only laptop and not the phone)>> Turn off your phone >> Press volume up and volume down keep them pressed and plug in the USB type C into your phone.
7. You should be in download mode now, press volume up. In Odin you will see that phone is added.
8. Press start in Odin. Wait for it to finish and let the phone restart (it will happen On its own).
9. Done
Mbetu said:
Yes you can. My device is from Xfinity and I have done the switch to any Carrier I choose on bootloader 2. U1 to U and back is doable. The key is to use the modified Odin as specified in the guide.
"
2. Download Patched Odin here
3. Unpack/Unzip what you downloaded in Step 2 (Odin Compatible ROm) and put in a folder. Lets call the folder "Flash"
4. Run Odin, click on BL, Browse to the "Flash" folder, add BL file from there, Do the same for AP (click on AP, Add AP file, this will take some time), Same for CP (click on CP, Add CP file)
5. Do the same for CSC (click on CSC, Add the file with the name starting with Home_CSC). If you use Home_CSC your phone will not get formatted and data will remain Intact
USERDATA Stays empty.
6. Now connect USB cable to your laptop (Only laptop and not the phone)>> Turn off your phone >> Press volume up and volume down keep them pressed and plug in the USB type C into your phone.
7. You should be in download mode now, press volume up. In Odin you will see that phone is added.
8. Press start in Odin. Wait for it to finish and let the phone restart (it will happen On its own).
9. Done
Click to expand...
Click to collapse
Thanks for the steps. Couple of Quick Questions:
1) I used frija to download the firmware (I typed CSC: TMB in frija, as its the first time I am using it, is it the right way)
2) I also checked the version in frija with the CSC: XAA, the version is same. How can I make sure that I have downloaded the correct TMB firmware.
Thanks.
dawinner said:
Thanks for the steps. Couple of Quick Questions:
1) I used frija to download the firmware (I typed CSC: TMB in frija, as its the first time I am using it, is it the right way)
2) I also checked the version in frija with the CSC: XAA, the version is same. How can I make sure that I have downloaded the correct TMB firmware.
Thanks.
Click to expand...
Click to collapse
You might want to extract the files and check for differences. The Frija tool has been kind of good to me.
Mbetu said:
You might want to extract the files and check for differences. The Frija tool has been kind of good to me.
Click to expand...
Click to collapse
Thanks for all the help, one last question, and I dont know if you will know about this:
To enable ESIM (Only T-Mobile version has E-SIM), do I need to flash U version of T-Mobile of U1 version of T-Mobile will also provide me with the same ESIM functionality?
dawinner said:
Thanks for all the help, one last question, and I dont know if you will know about this:
To enable ESIM (Only T-Mobile version has E-SIM), do I need to flash U version of T-Mobile of U1 version of T-Mobile will also provide me with the same ESIM functionality?
Click to expand...
Click to collapse
I think I flashed the U version of Tmobile but it does not hurt to try both. This is what my device info says after converting my Xfiniti to Tmobile
Mbetu said:
I think I flashed the U version of Tmobile but it does not hurt to try both. This is what my device info says after converting my Xfiniti to Tmobile
Click to expand...
Click to collapse
Thanks!!!!
Mbetu said:
I think I flashed the U version of Tmobile but it does not hurt to try both. This is what my device info says after converting my Xfiniti to Tmobile
Click to expand...
Click to collapse
I flashed the complete U firmware except the USER DATA file. But my Service Provider Software version is still stuck at XAA, its not changing to TMB. Though the phone model has changed to what you have in your screenshot.
Any idea what to do?
dawinner said:
I flashed the complete U firmware except the USER DATA file. But my Service Provider Software version is still stuck at XAA, its not changing to TMB. Though the phone model has changed to what you have in your screenshot.
Any idea what to do?
Click to expand...
Click to collapse
So the Model is 986U/DS ? And is eSim enabled ?. That is the state you would want to be in. I understand the last XXX in the service provider software can't be changed. Mine didn't change and stayed CCT which is for xfinity but the as you can see, I have TMB/TMB, TMB/CCT. Esim is enabled and my Mint mobile (Tmobile) number is on it and I have a foreign physical Sim which is roaming on AT&T on the physical slot.
You might be close.
Mbetu said:
So the Model is 986U/DS ? And is eSim enabled ?. That is the state you would want to be in. I understand the last XXX in the service provider software can't be changed. Mine didn't change and stayed CCT which is for xfinity but the as you can see, I have TMB/TMB, TMB/CCT. Esim is enabled and my Mint mobile (Tmobile) number is on it and I have a foreign physical Sim which is roaming on AT&T on the physical slot.
You might be close.
Click to expand...
Click to collapse
Also picked this nugget up from another thread
"You have to flash full tmb firmware. Not xaa tmb but 986u tmb firmware. The esim is in the user data section you'll flash"
Others have suggested you have to do a factory reset or flash the actual CSC file not the Home CSC which means you will loose DATA. I was doing this on a phone I had not setup yet so didn't mind loosing DATA. I am also assuming you have a TMB sim card in the phone because I understand that is needed so the phone can connect to Tmobile and download the carrier data files that actually changes the CSC after a clean flash.
These are just some of the things I picked up from here when doing my conversion.
Mbetu said:
Also picked this nugget up from another thread
"You have to flash full tmb firmware. Not xaa tmb but 986u tmb firmware. The esim is in the user data section you'll flash"
Others have suggested you have to do a factory reset or flash the actual CSC file not the Home CSC which means you will loose DATA. I was doing this on a phone I had not setup yet so didn't mind loosing DATA. I am also assuming you have a TMB sim card in the phone because I understand that is needed so the phone can connect to Tmobile and download the carrier data files that actually changes the CSC after a clean flash.
These are just some of the things I picked up from here when doing my conversion.
Click to expand...
Click to collapse
Yup I used the TMB version only. The model Number changed to 986U/DS. In About phone, it shows me the IMEI of the Esim, but its greyed out.
The only thing I dont have is the T-Mobile Sim. I think thats whats causing the issue. I will arrange a t-Mobile sim and try it tomorrow.
Thanks for all the help.
Mbetu said:
Also picked this nugget up from another thread
"You have to flash full tmb firmware. Not xaa tmb but 986u tmb firmware. The esim is in the user data section you'll flash"
Others have suggested you have to do a factory reset or flash the actual CSC file not the Home CSC which means you will loose DATA. I was doing this on a phone I had not setup yet so didn't mind loosing DATA. I am also assuming you have a TMB sim card in the phone because I understand that is needed so the phone can connect to Tmobile and download the carrier data files that actually changes the CSC after a clean flash.
These are just some of the things I picked up from here when doing my conversion.
Click to expand...
Click to collapse
QQ: Does it has to be a T-Mobile Sim? or Mint mobile or anyother T-Mobile based MVNO should work?
dawinner said:
QQ: Does it has to be a T-Mobile Sim? or Mint mobile or anyother T-Mobile based MVNO should work?
Click to expand...
Click to collapse
Has to be a Tmobile Sim. I tried a Mint Sim it didn't work. If you are seeing the esim but greyed out, then you are close. Restart with a Tmobile Sim and you might be in business
Mbetu said:
Has to be a Tmobile Sim. I tried a Mint Sim it didn't work. If you are seeing the esim but greyed out, then you are close. Restart with a Tmobile Sim and you might be in business
Click to expand...
Click to collapse
Thanks that helps. I just have to figure a way to get a tmobile sim. I dont have it. Lol. Will try again once I get my hands on a Tmobile sim.
Thanks for the help.
dawinner said:
Thanks that helps. I just have to figure a way to get a tmobile sim. I dont have it. Lol. Will try again once I get my hands on a Tmobile sim.
Thanks for the help.
Click to expand...
Click to collapse
Anytime. FYI, dois not have to be an active TMB sim. Used ones are on ebay for about 2 bucks.
Mbetu said:
Anytime. FYI, dois not have to be an active TMB sim. Used ones are on ebay for about 2 bucks.
Click to expand...
Click to collapse
Thanks. Let me try those.
Since the OP looks like problem solved, and not wanting to waste new thread, i have similar issues, can you help?
I have an S10e I recently broke (amazon renewed w/U1 FW), so I got another S10e from amazon, renewed which appears to also be U1 FW.
Except the latest, the replacement phone, the one I have now, NOONE can hear me, like all the time!!!!!!! Dead spots everywhere! Its so annoying. Its like i have a bad Mic? Or something...
This didn't happen with my identical phone, the one I had prior to this one, using identical sim.
I'm on Mint mobile, which is a TMO MVNO and currently have XAA/XAG FW running on the new S10e, the new one w/bad Mic or FW problem
It appears I am on U1 Unlocked USA firmware on latest phone ( i may have flashed FW Odin when I got this new one-to be safe- i forgot)
ALSO: BOTH renewed S10e's I've Purchased from Amazon, when lookup the IMEI, it shows as the AT&T Model. Which i understand the U/U1 FW can be swapped, BUT, both phones were advertised as U1 Models for the Hardware, so they sold me U models but they flashed with U1 FW probably to make more money. (this may seem trivial, but Samsung specifically has stated TWICE, that I couldn't Beta Test their last to major android FW's, because my phone shows as At&t on their end, and not the truly unlocked U1 model, for which the beta tests were for. And i was told when i purchased it was fully unlocked U1 ver. The phone itself even says its 970u1 in settings etc.)
Are there ANY hardware (including frequency bands) differences between U and U1 Models???
Is it somehow possible that my CSC, or FW on my phone is affecting my phone so badly that people cant hear me like 88% of all calls? Like should i flash different FW, or reflash or use different CSC??
Is it possible that if I went with a locked TMO FW (or another) that I could possibly, maybe get better reception so folks can hear me better? Or hear me more often or more frequently?
How often do mics go bad or get dirty on these? Can a mic be cleaned?
I have been in the other Note 20 flashing thread but I am stuck. Tried so many ways but can't get the TMB csc to stick, always shows only XAA. I have TMO sim card too. Not sure if they blocked it on the newer releases of the phone
Has anyone tried Samkey to do this? Heard it only takes 1 credit but smallest amount of credits to purchase on ebay is 10 and I dont feel like investing more money into this effort

Question Change Service Provider Software

Hi all,
I bought this phone from my friend who was using it on ATT. It is global unlocked phone and I activate and register, change new 5gsim and no problem on Verizon Network.
It is working and fine but, it shows ATT logo when phone is boot up and still it has ATT bloatware.
Under the Software information > Service provider software version is showing below
SAOMC_SM-F711U_OYN_ATT_RR_0016
ATT/ATT/ATT
SO THIS PHONE IS legit!! even Verizon told us. They did everything with me for 3 hours. wow!
Anyway, I think it's the problem of other carrier's software is in
Do you guys know how to change provider software to Verizon? should I contact Samsung??
Please help me.
Thank you!!!!!!!!
Leeman78 said:
Hi all,
I bought this phone from my friend who was using it on ATT. It is global unlocked phone and I activate and register, change new 5gsim and no problem on Verizon Network.
It is working and fine but, it shows ATT logo when phone is boot up and still it has ATT bloatware.
Under the Software information > Service provider software version is showing below
SAOMC_SM-F711U_OYN_ATT_RR_0016
ATT/ATT/ATT
SO THIS PHONE IS legit!! even Verizon told us. They did everything with me for 3 hours. wow!
Anyway, I think it's the problem of other carrier's software is in
Do you guys know how to change provider software to Verizon? should I contact Samsung??
Please help me.
Thank you!!!!!!!!
Click to expand...
Click to collapse
Flash a U1 software and VZW userdata.
rogerandgina06 said:
Flash a U1 software and VZW userdata.
Click to expand...
Click to collapse
Thank you for reply. I don't know what you mean and how should I do it?
Would you let me know?
Leeman78 said:
Thank you for reply. I don't know what you mean and how should I do it?
Would you let me know?
Click to expand...
Click to collapse
Read here to get a idea.
F711U and F711U1 Firmware Links and Flashing Discussion Here
(WIP, files are currently processing and uploading) For those who aren't already aware, F711U is the model number of all of the US carrier versions of the Z Flip3. The F711U1 is the model number of the same device, but sold by Samsung SIM...
forum.xda-developers.com
rogerandgina06 said:
Read here to get a idea.
F711U and F711U1 Firmware Links and Flashing Discussion Here
(WIP, files are currently processing and uploading) For those who aren't already aware, F711U is the model number of all of the US carrier versions of the Z Flip3. The F711U1 is the model number of the same device, but sold by Samsung SIM...
forum.xda-developers.com
Click to expand...
Click to collapse
I found solutions and flash the firmware with Verizon userdata, but, still shwoing everything on ATT. Not Verizon.
I even flash with factory reset. Yes, I used Odin 3.13.1b patched and it passed...
Do you have any idea?
Leeman78 said:
I found solutions and flash the firmware with Verizon userdata, but, still shwoing everything on ATT. Not Verizon.
I even flash with factory reset. Yes, I used Odin 3.13.1b patched and it passed...
Do you have any idea?
Click to expand...
Click to collapse
Try google to search for a different csc. After that I don't have a clue...
I got it working. Thank you. your "Flash a U1 software and VZW userdata." help me a lot.
I did find out good firmware and software at Sammobile and now everything works as Verizon.
Thank you
Leeman78 said:
I got it working. Thank you. your "Flash a U1 software and VZW userdata." help me a lot.
I did find out good firmware and software at Sammobile and now everything works as
Leeman78 said:
I found solutions and flash the firmware with Verizon userdata, but, still shwoing everything on ATT. Not Verizon.
I even flash with factory reset. Yes, I used Odin 3.13.1b patched and it passed...
Do you have any idea?
Click to expand...
Click to collapse
Can you link me to the one you used ? I’m trying to flash mine to u1 and I can’t get it to pass for anything, I keep getting model mismatch or complete write fail
Click to expand...
Click to collapse
@iHeartslutsz https://www.sammobile.com/samsung/galaxy-z-flip-3/firmware/#SM-F711U1
Whenever I flash a new software through Odin after downloading it from Sammobile, the Dark Side RC theme (I think it's related somehow to the so called Star Wars special edition) for samsung, comes as one of two default themes into the system and can not be removed. Hence, even I change the theme from setting, this iron head appears everytime I restart the phone for a few seconds. So I tried different firmwares for my country but nothing changes. So someone from another forum said that my service provider software version differs than theirs. So in short, how to get rid of this silly iron head? Any help would be appreciated.
change csc, use SamKEY (paid) or SamFwFRPTool (free), then flash frimware you need with odin with CSC file (this will wipe your phone and reset to factory), not use home_csc in odin
wojtas69 said:
change csc, use SamKEY (paid) or SamFwFRPTool (free), then flash frimware you need with odin with CSC file (this will wipe your phone and reset to factory), not use home_csc in odin
Click to expand...
Click to collapse
Thank you. I downloaded totally different firmware files with different CSC code and the problem has solved.
SamFwFRPTool is a tool I use to change my CSC software channel. The way I understand it you need to change the CSC in the program before flashing the u1 software on it so you get a full unlock as opposed to a partial one.
I might be wrong here though so don't take everything I say as being true.

Question Need Unlocked Firmware For ATT S908USQU2AVDI

Having trouble finding the file to flash my att branded phone to the unlocked firmware. the phone is unlocked. i tried S908USQU2AVDJ insteadof I which was the only one that worked but then corrupted my phone and had to factory reset.
does the sim card inserted matter?
Unlocked firmware is U1 not U. Hand having sim in doesn't matter
butchieboy said:
Unlocked firmware is U1 not U. Hand having sim in doesn't matter
Click to expand...
Click to collapse
can you please give a link for the correct firmware for my unlocked att phone
i have no idea which version im supposed to use...
dreammachinebro said:
can you please give a link for the
Click to expand...
Click to collapse
OTA and Non-OTA Firmware for S22 Ultra SM-S908U and S22 Ultra SM-S908U1 Versions
See Post #2 and #3 for the Links to the Firmware All of the firmware posted here can be flashed on any U or U1 Device. Each of the firmware's are NOT carrier dependent and only has carrier labels listed in order to have an idea if you might get...
forum.xda-developers.com
butchieboy said:
OTA and Non-OTA Firmware for S22 Ultra SM-S908U and S22 Ultra SM-S908U1 Versions
See Post #2 and #3 for the Links to the Firmware All of the firmware posted here can be flashed on any U or U1 Device. Each of the firmware's are NOT carrier dependent and only has carrier labels listed in order to have an idea if you might get...
forum.xda-developers.com
Click to expand...
Click to collapse
how doi know which bootloader i have and which file to choose though?
thanksfor your help
i dont want to corrupt my phone again... settig it up again is such a pain and i thinki lost a bunch of data becayse the backup didnt get everything
5th character from the right . Will say U1 or U2. You can't go back to U1 bootloader if you updated to U2.
Flashing firmware in odin will wipe device anyway unless you use HOME_CSC instead of csc
This is bootloader
butchieboy said:
Flashing firmware in odin will wipe device anyway unless you use HOME_CSC instead of csc
Click to expand...
Click to collapse
Download Galaxy S22 Ultra SM-S908U1 (ATT) S908U1UEU2AVF7 in Samfw - Samsung firmware download
Galaxy S22 Ultra SM-S908U1 (ATT - United States) S908U1UEU2AVF7 S(Android 12) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
is this the latest version?
Yes
Sometimes when you go from U firmware back to U1 you will have to factory reset. So save your stuff on computer or to external SD. My opinion clean install is always best anyway. I don't mind setting everything back up that way I know all is good. But to each their own.
butchieboy said:
Sometimes when you go from U firmware back to U1 you will have to factory reset. So save your stuff on computer or to external SD. My opinion clean install is always best anyway. I don't mind setting everything back up that way I know all is good. But to each their own.
Click to expand...
Click to collapse
did u notice a difference in the unlocked firmware vs carrier firmware? i already had to factory reset cuz i messed up so i only have my google drive backup file
You can try to flash using HOME_CSC to save data instead of csc. But once flashed it may boot you back to stock recovery. If it does don't worry, you will just have to factory reset and it will boot. And if you get the Emergency blue screen don't panic you can still flash firmware on that screen.
No I did not notice a difference. My device is At&t locked. I just use ADB AppControl to debloat anyway to get rid of all the At&t crap. But no I did not notice a difference.
i think i got it brother, ty for your time.

Categories

Resources