Related
Hey guys,
Have had my Honor 6 H60-L02 FDD-LTE for little under 4 hours now
Already unlocked the bootloader and flashed CWM V.6.0.5.1
I installed the MIUI v4.9.6 Rom and i don't really like it, it keeps coming up saying com.android.phone has stopped, and when you update to v4.12 it gets stuck in a boot loop
So I don't think MIUI is very stable for the phone, and I want to install EMUI v3.0 (This isn't lollipop yet is it?)
Long story short, I figure i have to reflash the stock recovery firmware because CWM wont install an Update.App file
I downloaded the Honor 6 Multitool
When i get to install recovery, i choose my honor 6 model then it asks for EMUI 2.3 or 3.0, i tried all the 3.0's and they dont load the recovery, just go back into android
so i tried some of the EMUI 2.3's, i have no idea what each number at the end represent and which one suits my phone... i.e B118SP02?
So that is what stage im at, i have MIUI v4.9.6 with CWM V.6.0.5.1
And i am trying to install EMUI v3.0 stable
Any help would be pretty awesome, can say im slightly disappointed with the availability of roms for this phone, but hopefully this will change in the future
Ok ...
i will start from beginning , i will tell you how to get the last stable update for your phone .
witch is B310【EMUI3.0_Android4.4】.
First Download it from here it's 1GB .
or from here (you should translate it first and click on stable and download) .
Second continue with this link .
Attention : Do step 6 before 5 .
Or go to
http://forum.xda-developers.com/showpost.php?p=57274153&postcount=1
scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
Links to the revert package etc are in the post too
Tried Myahyam's method and now the phone is stuck in a boot loop (shows the honor, powered by android splash, goes black then repeats the splash)
need to unbrick the damn thing now
im following the honor 6 multitools unbrick method, its in fastboot transfering files now, will report back when its done.
Just out of curiosity, besides MIUI and EMUI, what other roms are available to flash using CWM or TWRP?
Okay, managed to get CWM back on and sideload the MIUI4 rom again, just to prove to myself that I didn't brick my phone, so that parts all good!
I will have to try your method another time Julsen, i fly out on a 3 week holiday tomorrow morning, and want to load some games and movies to the phone to watch on the plane.
Hopefully when I come back in 3 weeks, there will be a better choice of roms to install using CWM/TWRK
If not, I will attempt your method Julsen, at least i now know how to fix any softboot/bootloop problems, good learning experience all up!
Here u will find couple of custom roms flashable via cwm
http://bbs.anzhi.com/forum.php?mod=forumdisplay&fid=1387&filter=typeid&typeid=15409&mobile=no
Sent from my H60-L02 using Tapatalk
Help me please!
I am having exactly the same problem that serpent is having.
Did any1 found solution?
Hey all, back from my 3 week trip
@nrpetonr i went to that site and grabbed two roms to flash using CWM, they both seem to put it into a boot loop
This phone is strange really, ever since i have unlocked the bootloader and put on a custom rom, its been the only rom that has worked, the rest all put me into a bootloop
Maybe i should try TWRP instead
here is alternative rom for Vowney maybe someone can build it.
I flashed this rom for Vowney its work but name of telefon changed to Hasee.... its have to be changed in build prop.
and its only english and chinese language
How to flash
1-download Rom Vowney and Hasee rom
2- entpack both roms and delete system and userdata img from vowney rom
3-take only sytem and user data img files from Hasee rom put in to vowney rom
if you want change also boot logo take also logo.bin from Hasse rom put in to Vowney rom
4- Hasee rom file download-------http://www.needrom.com/wp-content/uploads/2016/01/HASEE-HL9916004.zip
5 Vowney rom https://mega.nz/#!WtFRjIQb!NrQlJeemUZVz0Lr9SlgM2pap7MDkYZPiz1PdTkn0yuI
6- in SP_Flash_Tool------ flash it done
Has anyone ever tried this rom? Are there some differences between Elephone's original ROM (which is very bad) and Hasee's rom? I would try Hasee's rom but I would like to have further informations about it
Edit:
I tested it:
no gapps
fingerprint doesn't work (application crash when setting)
the rom recognizes only 3 gb of ram
the phone is very hot
ok video 4K...
test in progress
4K recorded properly?
4K recorded properly?
Llopbal said:
4K recorded properly?
Click to expand...
Click to collapse
Sorry, I have not run records and now I installed the original rom given that no one has thought of doing the same my test
Thank you for try this Rom I found this Rom information by elephone officials Website and this Rom has function by me but I don't have experience about Rom building I thought maybe some Developer can do it for everyone the elephone vowney user
http://www.needrom.com/download/hasee-hl9916004/
Here is from Rom information
Is it possible like before hasee rom install this rom?
http://forum.xda-developers.com/pure-xl/orig-development/rom-allview-s-stock-modified-soon-t3366508
Vowney Hasee self testing Rom
I've been using this for a while. It's made my vowney a proper phone. Gets a little hot but better than stock. Everything works apart from Fingerprint.
Flashing succes finally...
Yep...
After a very long battle i have also been able to install this experimental vowney-hasee rom...
I have Windows 7, x64.
I encountered many problems on the way, of which nobody said anything on the posts above:
- everytime i tried flashing , the MTP USB device driver could not be installed by the windows update process, which i couldn't stop untill it finished searching for the driver and couldn't find it... It lookslike the problem is in the phone itself. Solution found: reboot phone, wipe cache partition.
- when trying to flash using guide above, phone got never detected by flashing software and gave error:
"the memory buffer for loading image verification fail"
That i could not get over ... but... i found something on another forum...
And i ended up flashing the rom using that tool, successfully !!!
Tool downloaded is SP_Flash_Tool_v5.1524.00.000.zip
Same procedure: Load DA file, load scatter, click "Download button", restart phone. Imediately after restart, phone starts getting flashed by software.
Now i have a new problem: i can't damn find to change to english, from chinese language, but i'll be back with details on it.
:good:
Ok, after having the rom for one day i considder it still very dissapointing in that that everything is chinese and there is no gapps at all. Tried to install manually Play Store, it didn't work at all after install...
Unusable... Flashing 20060125 original Vowney update back...
sagimarius said:
Ok, after having the rom for one day i considder it still very dissapointing in that that everything is chinese and there is no gapps at all. Tried to install manually Play Store, it didn't work at all after install...
Unusable... Flashing 20060125 original Vowney update back...
Click to expand...
Click to collapse
Change Language from Chinese to English
I found english, i changed to english, but there are still a bunch of stuff in chinese, that's what i meant... And no chance to install gapps....
And no working TWRP ...
I did
Traton said:
Change Language from Chinese to English
Click to expand...
Click to collapse
Yes, i did. That's what i mean... Even after changing language to english, still half the rom stays chinese and the most disapointing thing is: no chance to install google apps. n
alternative rom...
model: Creo Mark 1
Link download
Interesting..
did you try it on? any experiences with it?
does the camera make better detailed pics?
does it still warm up when used with video / skype etc ?
pakyto said:
alternative rom...
model: Creo Mark 1
Link download
Click to expand...
Click to collapse
I tried it, but i cant get it to work, after flashing it the phone only shows elephone logo
I flashed the creo mark 1 ROM successfully today. After flashing with sp tools, I rooted then immediately went into recovery, applied super su, then wiped dalvik cache, & cache. It then booted into creo ROM. Every thing worked apart from no 1 sim card. No 2 worked. Location always on & had to apply WiFi before setup. Has a cool auto update feature. Camera very good. All google services worked & updated. Never tried to make a call, but it showed answer machine message. I reverted back to stick 5.1. Somebody might see a ROM similar with 6.0 or 7.0 I can fiddle about with. Also the haase ROM also works very similar. Shame about the vowney phone, I bet 7.0 would run beautiful on it.
I know we don't have a complete implementation of recoveries, like twrp/of (I know it's basically the same), yet. But now that we have the kernel source, what is still missing (vendor?)?
Also and kinda of a similar question, what is still missing regarding a "normal" flashing process? Like wipe system, data, dalvik/art, cache, flash rom and not having to have a base stock firmware and needing to format data.
To be honest, I'm a bit confused with this phone. My other phones (admittedly last one's didn't get past Android 9), were so different in that regard.
So I'd really appreciate if someone could take the time to shed some light on this.
Maybe we'll see a stable version of twrp for surya but support for dynamic partitions will not be available soon.
Having to format data everytime you flash a new rom may be solved having the kernel source. I think it has to do with encryption keys. Even if you don't have any password set in the OS, miui still generates keys to encrypt the data and when you wipe only, they get deleted hence, data on the internal nemeory remains encrypted. That's what I think.
https://twrp.me/site/update/2019/10/23/twrp-and-android-10.html
Ok, to be honest and judging by the fact that the announcement by Dees_Troy was over a year ago, things look pretty difficult to say the least.
I had my last phone (axon7) for so long that all the new implementations, like dynamic linking and super partition, weren't really on my radar.
Guess I was a little naive in thinking that the kernel source would be of any help in that regard.
This lack of stable time-tested solutions worries me, too.
That's the main reason why I'm still on stock ROM on the Poco and the Axon 7 is still my daily driver.
.
pnin said:
This lack of stable time-tested solutions worries me, too.
That's the main reason why I'm still on stock ROM on the Poco and the Axon 7 is still my daily driver.
.
Click to expand...
Click to collapse
How about EU ROM ?
Thanks for your thread.
I'm asking too.
I went from an old device too (redmi note 4 mido), and i'm a bit lost on flashing process.
Is it possible to :
Install orangefox via fastboot.
Wipe all & format data.
Flash recommend firmware for rom.
Flash custom rom.
Flash gapps.
And boot ?
Any problem with that ? What i'm missing ?
Don't have phone now, I'm waiting for shipping, and will wait for unlock bootloader access. I hope it will more clear and simple when I will discover poco x3.
You can do all those things. What you can't do for example is make a backup and restore your current custom rom.
Oh ok.
Sorry, miss understood your op post.
I was confused because on some custom roms thread, I find strange install instructions, like : dont wipe anything, format data AFTER flash custom roms...
Somes roms requires frimware 12.0.3. What about if phone have a more recent ? Can I downgrade just by flash fw+vendor on recovery before flash rom ?
And some people said they have bricked there devices.
Just to be sure to don't make stupid error on fresh new device, that I can't solve with miflash and fastboot.
Thank you for your reply.
I only clean flash roms, never backup, don't have a lot of apps, and majority have import/export options in-app.
But I hope for you it will be fixed soon.
atifnr said:
How about EU ROM ?
Click to expand...
Click to collapse
As @[armitage] pointed, it doesn't enable nandroid backups that I know of.
.
Hello,
I got a big issue on my Mi 10 Ultra, the stock camera is not wanting to work anymore.
It's black only and then refuses to launch (see screenshot attached).
I've tried third party apps but quality is not as good and I can't use all the camera modules. I've bought the 10 Ultra for it's cameras and really want to keep using it. (I do a lot of macrophotography and the 10 Ultra is amazing for this but only on the wide angle module.)
Did someone encountered the same issue ?
I've tried installing GCam but I do not managed to install apks. Theres an issue during the package analysis... (I've tried all GCam apks I could find here.)
I'm on stock EU OS with TWRP and I just activated root to try to solve the issue.
Sorry for bad english and french screenshots
EDIT: Every camera is working in the CIT hardware tests, I think it's software but I resetted the phone and nothing changed.
loupyes said:
Hello,
I got a big issue on my Mi 10 Ultra, the stock camera is not wanting to work anymore.
It's black only and then refuses to launch (see screenshot attached).
I've tried third party apps but quality is not as good and I can't use all the camera modules. I've bought the 10 Ultra for it's cameras and really want to keep using it. (I do a lot of macrophotography and the 10 Ultra is amazing for this but only on the wide angle module.)
Did someone encountered the same issue ?
I've tried installing GCam but I do not managed to install apks. Theres an issue during the package analysis... (I've tried all GCam apks I could find here.)
I'm on stock EU OS with TWRP and I just activated root to try to solve the issue.
Sorry for bad english and french screenshots
EDIT: Every camera is working in the CIT hardware tests, I think it's software but I resetted the phone and nothing changed.
Click to expand...
Click to collapse
stock EU OS ?
you mean Xiaomi Eu ROM?
If the code name is CAS,there are chinesse firmware only.
maybe try that
Use this tool https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Unroot before and dont relock the bootloader.
Thanks for the answer
NOSS8 said:
stock EU OS ?
you mean Xiaomi Eu ROM?
If the code name is CAS,there are chinesse firmware only.
Click to expand...
Click to collapse
I got the Xiaomi.EU ROM as it was shipped with. It has a TWRP recovery from when I rooted it and got Magisk installed.
My MIUI 12 version is V12.0.15.0.QJJCNXM (stable).
Use this tool https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Unroot before and dont relock the bootloader.
Click to expand...
Click to collapse
I understand this is a tutorial to change my ROM, which is not what I'm searching for as the ROM works really well. Plus I only see the CAS on this thread's links which is the chinese ROM.
Not sure what you meant.
My bootloader was locked all the time, I just unlocked it during my testing but it did not change anything.
loupyes said:
Thanks for the answer
I got the Xiaomi.EU ROM as it was shipped with. It has a TWRP recovery from when I rooted it and got Magisk installed.
My MIUI 12 version is V12.0.15.0.QJJCNXM (stable).
I understand this is a tutorial to change my ROM, which is not what I'm searching for as the ROM works really well. Plus I only see the CAS on this thread's links which is the chinese ROM.
Not sure what you meant.
My bootloader was locked all the time, I just unlocked it during my testing but it did not change anything.
Click to expand...
Click to collapse
My MIUI 12 version is V12.0.15.0.QJJCNXM=chinesse version
With this tool you will make a complete installation not like with the Twrp and can be recovered your the camera.
https://xiaomifirmwareupdater.com/miui/cas/stable/V12.0.15.0.QJJCNXM/
NOSS8 said:
My MIUI 12 version is V12.0.15.0.QJJCNXM=chinesse version
With this tool you will make a complete installation not like with the Twrp and can be recovered your the camera.
https://xiaomifirmwareupdater.com/miui/cas/stable/V12.0.15.0.QJJCNXM/
Click to expand...
Click to collapse
Now in the tests, my 5x telephoto camera does not respond, so I think it's an hardware issue, but I don't think the camera is broken so I'd like to found people with the same experience.
I don't think changing the recovery will solve the problem.
Plus I like having TWRP
loupyes said:
Now in the tests, my 5x telephoto camera does not respond, so I think it's an hardware issue, but I don't think the camera is broken so I'd like to found people with the same experience.
I don't think changing the recovery will solve the problem.
Plus I like having TWRP
Click to expand...
Click to collapse
Flash this rom to be sure
Mi 10 Ultra ChinaStableFastbootV13.0.4.0.SJJCNXM
Just to be sure of something, I did a test. Thanks for answering all my messages but what I need and want now is info or a way to debunk the issue.
I wont flash a ROM in a language I don't understand on the phone I use every day just to test something.
I already tried resetting the phone (including dalvik cache iirc) and it did not change anything.
Plus I would need a PC and a flashing tool, this would take a lot of time...
Finally, the issue did not came with a ROM change, the actual ROM is stable.
Edit : I changed the camera module, everything works perfectly
According to my repair shop, Xiaomis are just unreliable.
hello people, I have a small Problem, i have a redmi Note 11 Pro 5g global bought over Amazon in Germany, before i got it i checked for sure that it will get a12 now in my news app they are talking about the Note 11 Pro 5g will get a12, the last Update was only November Security Patch.
and cuz' i read a Bit more about it there are custom Roms, but without twrp so If it gets updatet i need to Reset my Phone again.
sooo is there a way currently to get me a12 or a newer Version with OTA Updates?
since in the MIUI Downloader App there is a global MIUI 13 a12 Rom, with Recovery i read so much about those Things now i dont have a clue anymore i'll attach some Screenshots downbelow.
If there is a Option with only one time resetting the Phone i would do it, with a safe Guide thanks for Reading.
Fendonacci said:
hello people, I have a small Problem, i have a redmi Note 11 Pro 5g global bought over Amazon in Germany, before i got it i checked for sure that it will get a12 now in my news app they are talking about the Note 11 Pro 5g will get a12, the last Update was only November Security Patch.
and cuz' i read a Bit more about it there are custom Roms, but without twrp so If it gets updatet i need to Reset my Phone again.
sooo is there a way currently to get me a12 or a newer Version with OTA Updates?
since in the MIUI Downloader App there is a global MIUI 13 a12 Rom, with Recovery i read so much about those Things now i dont have a clue anymore i'll attach some Screenshots downbelow.
If there is a Option with only one time resetting the Phone i would do it, with a safe Guide thanks for Reading.
Click to expand...
Click to collapse
If you checked that the update is for your device, then you can take it, and flash it through your stock recovery.
By taking the other route, i.e. flashing a custom recovery, and so on, you always can return totally to stock, to take the update you want, if it is available. Also, when some TWRP appears (based on your words), then you can flash any stock ROM, that is prepared to be flashed through recovery.
SubwayChamp said:
If you checked that the update is for your device, then you can take it, and flash it through your stock recovery.
By taking the other route, i.e. flashing a custom recovery, and so on, you always can return totally to stock, to take the update you want, if it is available. Also, when some TWRP appears (based on your words), then you can flash any stock ROM, that is prepared to be flashed through recovery.
Click to expand...
Click to collapse
i would need a Guide dir this why is it so hard
Fendonacci said:
i would need a Guide dir this why is it so hard
Click to expand...
Click to collapse
Sorry for delay, I will show you with images.
Go to Settings/about phone:
Then open it, and tap on 13
Then tap 7 times on 13 Miui 13, to have more options
Then go to the three dots, up to the right, then you'll see the options to flash the package to your device, download the latest ROM package, and navigate to it, then your device will make the rest. Be sure to enable USB debugging previously, and set all the drivers correctly, to have more options, just in case.