KINDLY CHECK THE LATEST POST. I HAVE AN UPDATE REGARDING THIS ROM.------------------------------------------------------------------THIS IS NOT A CUSTOM ROM! IS A MODIFIED VERSION OF THE ORIGINAL ROM!
Code:
Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
FLASHING PROCEDURE
Download the latest build
Reboot to recovery
Take Backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build
Reboot
Done!
DOWNLOAD LINK:V1.0
IMPROVED
Faster scroll
Deleted bloatware apps (More space)
More coming in the future!
Firstly, thanks for taking the time to make this, it's appreciated.
I have followed your instructions to the best of my abilities:
*Reboot to recovery (TWRP)
*Wipe System, Data, Cache , Dalvik
*Flash the latest build
*Reboot
but now TWRP is telling me there is no OS? WTF? Help!!
I can still boot into TWRP recovery and fastboot if needed but would prefer to maintain root if at all possible.
iFink said:
Firstly, thanks for taking the time to make this, it's appreciated.
I have followed your instructions to the best of my abilities:
*Reboot to recovery (TWRP)
*Wipe System, Data, Cache , Dalvik
*Flash the latest build
*Reboot
but now TWRP is telling me there is no OS? WTF? Help!!
I can still boot into TWRP recovery and fastboot if needed but would prefer to maintain root if at all possible.
Click to expand...
Click to collapse
If you reboot, it boots? And if you want root, you can use magisk
When i reboot it boots straight to Huawei eRecovery not normal system
If you or someone can help me, because this is my first rom.
I don't knwow why is booting in Huawei eRecovery...
But, if you extract, try to repack system.img and flash with fastboot the file "system.img" (the repacked file)
AndroTwrpid said:
If you or someone can help me, because this is my first rom.
I don't knwow why is booting in Huawei eRecovery...
But, if you extract, try to repack system.img and flash with fastboot the file "system.img" (the repacked file)
Click to expand...
Click to collapse
Hi
On my huawei mediapad t3 tablet, I wanted to do a factory reset on TWRP and by mistake I selected "system". By trying the custom installation goes well but when I reboot the tablet hangs on "your device booting now ..."
Can someone help me
I found solution , i posted it to help anyone : #Poste318
Hmm good to see people using this device still!!
Hi,
Many thanks for creating this ROM.
I am wondering if you can help me, I am fairly new to flashing.
I managed to unlock the bootloader and flash TWRP no problem.
In TWRP, I have tried to flash this rom using your instructions, with the exception of flashing Magisk 21.2 immediately after (before reboot). I did also do a format aswell as advanced wipe on the partitions you mentioned, was this my mistake?
Now i just get "Your device is booting now" which never happens.
I went back into TWRP and repeated the process, also flashed a Magisk uninstaller script just incase, then repeated the process again. Still getting the same problem after about 4 attempts.
Do I need to go back to stock and start again?
If so, any help on that would also be appreciated!
Thanks
A better solution is to extract the zip, then boot in twrp mode, then move the system.img to internal storage, click install, select the img file, then choose "system" and done.
Someone here has managed to install this successfully?
twolitrepinto said:
Hi,
Many thanks for creating this ROM.
I am wondering if you can help me, I am fairly new to flashing.
I managed to unlock the bootloader and flash TWRP no problem.
In TWRP, I have tried to flash this rom using your instructions, with the exception of flashing Magisk 21.2 immediately after (before reboot). I did also do a format aswell as advanced wipe on the partitions you mentioned, was this my mistake?
Now i just get "Your device is booting now" which never happens.
I went back into TWRP and repeated the process, also flashed a Magisk uninstaller script just incase, then repeated the process again. Still getting the same problem after about 4 attempts.
Do I need to go back to stock and start again?
If so, any help on that would also be appreciated!
Thanks
Click to expand...
Click to collapse
Hello,
Sorry, this is a bit of off topic, can you tell me how you rooted your device? i can't seem to root mine.
I am totally a noob.
Does this rom fully work?
Thanks for your answer.
gr981888 said:
Hello,
Sorry, this is a bit of off topic, can you tell me how you rooted your device? i can't seem to root mine.
I am totally a noob.
Click to expand...
Click to collapse
You need to first go to dc-unlocker.com, then buy 4 credits, download the software and login in your account in the software. Then enable on the tablet usb debugging and click the magnifying glass and you will get the bootloader code. Then insert the usb cable in the tablet, then go in fastboot mode then open cmd and type: "fastboot oem unlock code" (replace code with the code obtained in dc unlocker) then on the tablet click yes and your tablet will format. done.
Chris_wafer said:
Does this rom fully work?
Thanks for your answer.
Click to expand...
Click to collapse
I don't tested.
Does sanyone have an updated download link? The one on the original post is broken
Lane-boy21 said:
Does sanyone have an updated download link? The one on the original post is broken
Click to expand...
Click to collapse
hey, i lost the files sorry, i'm trying to find it.
I will put the same does anyone can update the download link please ?
Lane-boy21 said:
Does sanyone have an updated download link? The one on the original post is broken
Click to expand...
Click to collapse
Did you get that link in the end ?
Me too
Related
Hi. I'm here for help you
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Click to expand...
Click to collapse
1) How to install? If you have stock zenui go to 1C, if you have a custom ROM go to 1A
If you don't backup all your data you lost all.
1A) First do a TWRP backup on sdcard (if you don't have sdcard just do in internal storage and save the backup on pc. Select system, data, recovery and boot. Then go to wipe - advanced wipe, select dalvik, system, data, cache and Swype.
Then reboot in fastboot.
Now your phone don't have any OS installed so don't boot. We are going to install the stock and unmodified firmware and recovery on the phone.
1B) Download Asus flashtool:
https://drive.google.com/file/d/0B9rp3AJHKJXjNmRuRUJMWmtOT3c/view
and android 7 raw firmware for
ZE552KL:
http://www.mediafire.com/file/o12vo...14.2020.1703.28_M3.10.47.3_Phone-user.raw.zip
ZE520KL: http://www.mediafire.com/file/5qrp2...14.2020.1703.28_M3.10.47.3_Phone-user.raw.zip
Now boot your phone in fastboot, connect to pc, install and open Asus flash tool, select raw file and device model and flash the firmware. If the pc don't detect your phone install the drivers.
1C) Download from Asus site the latest nougat update:
WARNING: IF YOU OPEN THE ZIP FILE THE RECOVERY FAIL TO UPDATE
And you must delete this zip and download another
ZE552KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-WW-14.2020.1712.85-user.zip
ZE520KL:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE520KL/UL-ASUS_Z017D_1-WW-14.2020.1712.85-user.zip
Put in device storage and wait the device to detect the update. Tap on notification and install. If fail try in order:
-put in sdcard and update via STOCK recovery
-sideload the file from your PC via adb
-download the file with another browser and delete the previous
After that, so the same with Android 8.0 update
ZE552KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-WW-15.0410.1712.31-user.zip
ZE520KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE520KL/UL-ASUS_Z017D_1-WW-15.0410.1712.31-user.zip
2) Flash recovery
I know there are another method to flash a recovery but this method is simply:
2A) Download twrp from this thread:
https://forum.xda-developers.com/zenfone-3/development/recovery-twrp-3-2-1-ze520kl-ze552kl-t3742765
Download Zenfone 3 toolkit from this thread:
https://forum.xda-developers.com/zenfone-3/how-to/tool-zenfone-3-one-click-tool-t3507417
2B) Unpack and go to zenfone3_clictool/twrp folder. Delete both recoveries and put the 3.2.1 twrp in folder. If you have ZE552KL rename with " twrp-3.0.2-Z012D ", if you have ZE520KL rename with " twrp-3.0.2-Z017D ". Now boot your phone in fastboot, connect to pc and open the Zenfone 3 click tool, follow the instructions and select flash twrp for your device. Reboot your phone in recovery and see if can read internal storage. If read 0B try another time.
3) Rooting is so simple. Just download Magisk
boot in twrp and flash
Xposed work well, I tested only gravitybox
Substratum works... Meh
Reserved
ExperienceTesla said:
2) Flash recovery
I know there are another method to flash a recovery but this method is simply:
2A) Download twrp: https://www.dropbox.com/s/r9o4a3elbgvg6rj/twrp-3.2.1-0-Z012-20171220-oreotest.img?dl=1
Download Zenfone 3 toolkit from this thread:
https://forum.xda-developers.com/zenfone-3/how-to/tool-zenfone-3-one-click-tool-t3507417
2B) Unpack and go to zenfone3_clictool/twrp folder. Delete both recoveries and put the 3.2.1 twrp in folder. If you have ZE552KL rename with " twrp-3.0.2-Z012D ", if you have ZE520KL rename with " twrp-3.0.2-Z017D ". Now boot your phone in fastboot, connect to pc and open the Zenfone 3 click tool, follow the instructions and select flash twrp for your device. Reboot your phone in recovery and see if can read internal storage. If read 0B try another time.
Click to expand...
Click to collapse
Great job!
However, I have a question. TWRP you mention to in 2A's version is 3.0.2 or 3.2.1?
I'm sorry that my English is bad.
So, just to be sure, I'm currently on ViperOS, I need to follow from 1A step, right? Or anything before that I have to do first?
nyanntaryou said:
Great job!
However, I have a question. TWRP you mention to in 2A's version is 3.0.2 or 3.2.1?
I'm sorry that my English is bad.
Click to expand...
Click to collapse
Is 3.2.1 . It's a beta TWRP so may have some bug. But basic functions works
tkhquang said:
So, just to be sure, I'm currently on ViperOS, I need to follow from 1A step, right? Or anything before that I have to do first?
Click to expand...
Click to collapse
Yes. You need to follow whole thread: first start with backup, save backup to pc, flash stock ecc ecc
ExperienceTesla said:
Is 3.2.1 . It's a beta TWRP so may have some bug. But basic functions works
Click to expand...
Click to collapse
Can it work on both ze520kl and ze552kl?
Thank you in advance for your kind cooperation.
nyanntaryou said:
Can it work on both ze520kl and ze552kl?
Thank you in advance for your kind cooperation.
Click to expand...
Click to collapse
No, it doesn't work on the ZE520KL.
As oreo is finally available on this phone I'll also build a new twrp version for it
(If anyone is wondering: I posted OP's twrp some time ago in the oreo beta leak thread here)
Stay tuned...
planet9 said:
No, it doesn't work on the ZE520KL.
As oreo is finally available on this phone I'll also build a new twrp version for it
(If anyone is wondering: I posted OP's twrp some time ago in the oreo beta leak thread here)
Stay tuned...
Click to expand...
Click to collapse
Thank you for the great work!
The ZE552KL TWRP works fine for flashing the Magisk at my ZE520KL but not much else
I can't wait to get a proper TWRP for my ZE520KL
Will this also work for Z012DC (Canadian 5.5" Zenfone3)? I'm running WW_14.2020.1709.68 with TWRP and rooted, would I start from 1A or 1C?
rdmozero said:
Thank you for the great work!
The ZE552KL TWRP works fine for flashing the Magisk at my ZE520KL but not much else
I can't wait to get a proper TWRP for my ZE520KL
Click to expand...
Click to collapse
Is there any issues when you flashed twrp on your phone ze520kl?
rdmozero said:
Thank you for the great work!
The ZE552KL TWRP works fine for flashing the Magisk at my ZE520KL but not much else
I can't wait to get a proper TWRP for my ZE520KL
Click to expand...
Click to collapse
I really didn't expect this to work - there's always something new to learn
mecoromeo said:
Is there any issues when you flashed twrp on your phone ze520kl?
Click to expand...
Click to collapse
You can find the proper twrp version for your devices here:
https://forum.xda-developers.com/zenfone-3/development/recovery-twrp-3-2-1-ze520kl-ze552kl-t3742765
Ok, so I flash TWRP recovery and everything is OK, but, When I start the phone, it goes to bootloop...What should I do? Am I missing a step?
@Kevinxdfun29
Flash magisk, supersu binary or the no verify file if you don't want root. Then wipe cache and dalvik .
ExperienceTesla said:
Hi. I'm here for help you
1) How to install? If you have stock zenui go to 1C, if you have a custom ROM go to 1A
If you don't backup all your data you lost all.
1A) First do a TWRP backup on sdcard (if you don't have sdcard just do in internal storage and save the backup on pc. Select system, data, recovery and boot. Then go to wipe - advanced wipe, select dalvik, system, data, cache and Swype.
Then reboot in fastboot.
Now your phone don't have any OS installed so don't boot. We are going to install the stock and unmodified firmware and recovery on the phone.
1B) Download Asus flashtool:
https://drive.google.com/file/d/0B9rp3AJHKJXjNmRuRUJMWmtOT3c/view
and android 7 raw firmware for
ZE552KL:
http://www.mediafire.com/file/o12vo...14.2020.1703.28_M3.10.47.3_Phone-user.raw.zip
ZE520KL: http://www.mediafire.com/file/5qrp2...14.2020.1703.28_M3.10.47.3_Phone-user.raw.zip
Now boot your phone in fastboot, connect to pc, install and open Asus flash tool, select raw file and device model and flash the firmware. If the pc don't detect your phone install the drivers.
1C) Download from Asus site the latest nougat update:
WARNING: IF YOU OPEN THE ZIP FILE THE RECOVERY FAIL TO UPDATE
And you must delete this zip and download another
ZE552KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-WW-14.2020.1712.85-user.zip
ZE520KL:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE520KL/UL-ASUS_Z017D_1-WW-14.2020.1712.85-user.zip
Put in device storage and wait the device to detect the update. Tap on notification and install. If fail try in order:
-put in sdcard and update via STOCK recovery
-sideload the file from your PC via adb
-download the file with another browser and delete the previous
After that, so the same with Android 8.0 update
ZE552KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE552KL/UL-ASUS_Z012D-WW-15.0410.1712.31-user.zip
ZE520KL: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE520KL/UL-ASUS_Z017D_1-WW-15.0410.1712.31-user.zip
2) Flash recovery
I know there are another method to flash a recovery but this method is simply:
2A) Download twrp: https://www.dropbox.com/s/r9o4a3elbgvg6rj/twrp-3.2.1-0-Z012-20171220-oreotest.img?dl=1
Download Zenfone 3 toolkit from this thread:
https://forum.xda-developers.com/zenfone-3/how-to/tool-zenfone-3-one-click-tool-t3507417
2B) Unpack and go to zenfone3_clictool/twrp folder. Delete both recoveries and put the 3.2.1 twrp in folder. If you have ZE552KL rename with " twrp-3.0.2-Z012D ", if you have ZE520KL rename with " twrp-3.0.2-Z017D ". Now boot your phone in fastboot, connect to pc and open the Zenfone 3 click tool, follow the instructions and select flash twrp for your device. Reboot your phone in recovery and see if can read internal storage. If read 0B try another time.
3) Rooting is so simple. Just download Magisk
boot in twrp and flash
Xposed work well, I tested only gravitybox
Substratum works... Meh
Click to expand...
Click to collapse
My phone is now WW-15.0410.1712.31
I cant sure that my phone will boot or not after flashed twrp. So I go to fastboot mode, and boot into twrp by command:
fastboot boot twrp-3.2.1-0-Z012-20171220-oreotest.img
downloading 'boot.img'...
OKAY [ 0.786s]
booting...
But nothing happens, my phone still in fastboot mode.
I can boot into twrp with beta oreo previously released.
I think that twrp is not compatible with official oreo now.
sontranngoc said:
My phone is now WW-15.0410.1712.31
I cant sure that my phone will boot or not after flashed twrp. So I go to fastboot mode, and boot into twrp by command:
fastboot boot twrp-3.2.1-0-Z012-20171220-oreotest.img
downloading 'boot.img'...
OKAY [ 0.786s]
booting...
But nothing happens, my phone still in fastboot mode.
I can boot into twrp with beta oreo previously released.
I think that twrp is not compatible with official oreo now.
Click to expand...
Click to collapse
Try install recovery following the instructions in first post. Worked for me
If the "zenfone3 clicktool" method not work try
fastboot flash recovery twrp-3.2.1-0-Z012-20171220-oreotest.img
So reboot in recovery and give me a feedback
ExperienceTesla said:
Try install recovery following the instructions in first post. Worked for me
If the "zenfone3 clicktool" method not work try
fastboot flash recovery twrp-3.2.1-0-Z012-20171220-oreotest.img
So reboot in recovery and give me a feedback
Click to expand...
Click to collapse
Yes. I flashed the twrp successfully. But I cant boot into twrp without flashed it. I need to backup the latest stock recovery, in order to flash a new stock rom in future.
i got bootloop after trying to reboot my phone from twrp recovery. wtf
Flat Bar Indicator
w1040 said:
i got bootloop after trying to reboot my phone from twrp recovery. wtf
Click to expand...
Click to collapse
When does Android 8.0 support the Flat Bar Indicator module?
dzunghooca said:
When does Android 8.0 support the Flat Bar Indicator module?
Click to expand...
Click to collapse
Wrong thread bro
first some back story:
it's been a long time since i did a lot of rooting so i lost a lot of knowledge.
I got the phone close to release in the EU.
There was only BETA stage twrp at the time.
So i flashed this unstable twrp and rooted with magisk.
And i run stock Oxy Rom.
But the main problem is, whenever i boot into recovery, twrp ask me for a password. (i have none) so i press continue.
And it then ask for unmodified system partition. (not sure what to select here)
But when i swipe to allow modification, i can't find the root of the phone? i cannot find the download folder where i flash updates or other modified apk's.
It's all just numbers and random letter. i have no idea on how to proceed or how to update twrp safely without falling into boot loop and other problems.
Some help would be appriciated. Thank you.
saitek1911 said:
first some back story:
it's been a long time since i did a lot of rooting so i lost a lot of knowledge.
I got the phone close to release in the EU.
There was only BETA stage twrp at the time.
So i flashed this unstable twrp and rooted with magisk.
And i run stock Oxy Rom.
But the main problem is, whenever i boot into recovery, twrp ask me for a password. (i have none) so i press continue.
And it then ask for unmodified system partition. (not sure what to select here)
But when i swipe to allow modification, i can't find the root of the phone? i cannot find the download folder where i flash updates or other modified apk's.
It's all just numbers and random letter. i have no idea on how to proceed or how to update twrp safely without falling into boot loop and other problems.
Some help would be appriciated. Thank you.
Click to expand...
Click to collapse
Boot to bootloader, flash original boot img than follow the guide to flash original twrp
Hitman478™ said:
Boot to bootloader, flash original boot img than follow the guide to flash original twrp
Click to expand...
Click to collapse
and which of my problems does this solve?
First of all flash official TWRP now. Makes no sense to use the unofficial version because its not stable.
Enter PW -> decrypt data for TWRP
No PW -> hieroglyphs
I successfully used official twrp, version 3.2.2 and then did a "format data" and then used fastboot again to install the full rom.
Kollachi said:
First of all flash official TWRP now. Makes no sense to use the unofficial version because its not stable.
Enter PW -> decrypt data for TWRP
No PW -> hieroglyphs
Click to expand...
Click to collapse
ok i figured it out, added a password. and now it shows correct folder names etc. thanks.
saitek1911 said:
first some back story:
it's been a long time since i did a lot of rooting so i lost a lot of knowledge.
I got the phone close to release in the EU.
There was only BETA stage twrp at the time.
So i flashed this unstable twrp and rooted with magisk.
And i run stock Oxy Rom.
But the main problem is, whenever i boot into recovery, twrp ask me for a password. (i have none) so i press continue.
And it then ask for unmodified system partition. (not sure what to select here)
But when i swipe to allow modification, i can't find the root of the phone? i cannot find the download folder where i flash updates or other modified apk's.
It's all just numbers and random letter. i have no idea on how to proceed or how to update twrp safely without falling into boot loop and other problems.
Some help would be appriciated. Thank you.
Click to expand...
Click to collapse
U have corrupted u r data partation u have to factory reset along with wiping internal storage and then transfer u r rom File through MTP in sd card of phone and then flash rom.
Or u can flash fastboot flashable rom via fastboot mode.
Then install your official twrp via fastboot mide after installing rom.
Now twrp will detect all data from sd card
pankspoo said:
U have corrupted u r data partation u have to factory reset along with wiping internal storage and then transfer u r rom File through MTP in sd card of phone and then flash rom.
Click to expand...
Click to collapse
Thank you, all i did was add a four digit code when twrp asked me for a password. now the folders are showing up correctly. not just random numbers and letters.
still need to update twrp safely. can i flash a new twrp within twrp or do i need to update via computer?
saitek1911 said:
Thank you, all i did was add a four digit code when twrp asked me for a password. now the folders are showing up correctly. not just random numbers and letters.
still need to update twrp safely. can i flash a new twrp within twrp or do i need to update via computer?
Click to expand...
Click to collapse
U can directly flash new twrp installer in current recovery no problem
saitek1911 said:
and which of my problems does this solve?
Click to expand...
Click to collapse
All of your problems i presume
Can Anyone help me, please? I have somehow the same problem. The phone literally itself without doing anything started doing a download(odin) mode loop. So I deleted data, dalvik, cache, system partitions without internal storage since it has very very important files for me and a lot of projects for the university!!! and before and after the folders in internal storage in twrp shows as random numbers and letters. I don't know why since when the phone was working normally I was protecting it by fingerprint and a password. And when I installed a stock ROM after it without wiping the internal storage. The storage is showing in negative. If anyone can help me this would be super appreciated and helpful. Thank you!
Hitman478™ said:
Boot to bootloader, flash original boot img than follow the guide to flash original twrp
Click to expand...
Click to collapse
Can you help please?
Madara818181 said:
Can Anyone help me, please? I have somehow the same problem. The phone literally itself without doing anything started doing a download(odin) mode loop. So I deleted data, dalvik, cache, system partitions without internal storage since it has very very important files for me and a lot of projects for the university!!! and before and after the folders in internal storage in twrp shows as random numbers and letters. I don't know why since when the phone was working normally I was protecting it by fingerprint and a password. And when I installed a stock ROM after it without wiping the internal storage. The storage is showing in negative. If anyone can help me this would be super appreciated and helpful. Thank you!
Click to expand...
Click to collapse
If it is already showing folders with random file names in the internal storage it means it needs to format data (to remove file encryption) which deletes all files in the internal storage.
Don't wipe system because it removes your OS.
Always secure backup before messing your device.
Hitman478™ said:
Boot to bootloader, flash original boot img than follow the guide to flash original twrp
Click to expand...
Click to collapse
You may try this boot.img just rename to boot.img only.
Credits to RR10 TG channel by Enzo #CatGang.
tiga016 said:
If it is already showing folders with random file names in the internal storage it means it needs to format data (to remove file encryption) which deletes all files in the internal storage.
Don't wipe system because it removes your OS.
Always secure backup before messing your device.
You may try this boot.img just rename to boot.img only.
Credits to RR10 TG channel by Enzo #CatGang.
Click to expand...
Click to collapse
Thanks Man. All my university stuff is in the phone's internal storage so wiping it is no no for me and I need the files today!!! I flashed the boot.img file you attached using TWRP but now the phone is in a boot loop and it did not solve anything!!! Sorry for this but what the f**k should I do man. All my important files are on the phone!!!
Madara818181 said:
Thanks Man. All my university stuff is in the phone's internal storage so wiping it is no no for me and I need the files today!!! I flashed the boot.img file you attached using TWRP but now the phone is in a boot loop and it did not solve anything!!! Sorry for this but what the f**k should I do man. All my important files are on the phone!!!
Click to expand...
Click to collapse
Sorry I thought you are also literally same issues with OP but then it's not. Are you able to reboot to twrp? And what is the whole story of you device? I mean if you are rooted, what ROM you came from and all that you did before the issues occur. And did you tried to switch slot? Since you wiped everything with system included then you have no OS installed. Did you tried to flash OS via OTG? Or flash via fastboot.
I flashed another os without deleting the internal storage but the storage is now showing in negative values. Story is The phone literally itself without doing anything started doing a download(odin) mode loop. So I deleted data, dalvik, cache, system partitions without internal storage since it has very very important files for me and a lot of projects for the university!!! and before and after the folders in internal storage in twrp shows as random numbers and letters. I don't know why since when the phone was working normally I was protecting it by fingerprint and a password. And when I installed a stock ROM after it without wiping the internal storage. The storage is showing in negative and yes I can still boot into twrp
tiga016 said:
Sorry I thought you are also literally same issues with OP but then it's not. Are you able to reboot to twrp? And what is the whole story of you device? I mean if you are rooted, what ROM you came from and all that you did before the issues occur. And did you tried to switch slot? Since you wiped everything with system included then you have no OS installed. Did you tried to flash OS via OTG? Or flash via fastboot.
Click to expand...
Click to collapse
This is the story
Madara818181 said:
This is the story
Click to expand...
Click to collapse
I know that but it seems incomplete. It did not mention what I ask recently. It is always a need for detailed story.
Hi folks. As the title suggest I'm having problems installing TWRP recovery on teclast M89 tablet. I've tried a few different tutorials with no success. When I do it with fastboot it says that its installed, after that when I try to reboot the device, I'm stuck in bootloop. I've tried to do it a few times and its always the same problem. Does anyone have a solution? Thanks.
Hello, the same for me with my M89, I'm going crazy.... Help us please!!!! Thanks!!!
Teclast M89 TWRP 3.3.1
Teclast M89 TWRP 3.3.1
TWRP 3.3.1 for Teclast M89
The archive includes:
ZIP file for flashing via stock recovery
IMG file for flashing via fastboot
TWRP source code
Teclast M89 uses well-known firmware signature Android keys (test keys), that's why you can flash TWRP without unlocking the bootloader and erasing user data.
Installation instruction is inside the archive.
https://www.androidfilehost.com/?fid=6006931924117883832
My small Teclast M89 website: https://teclast-m89.neocities.org/
M89 TWRP Worked!
ValdikSS said:
Teclast M89 TWRP 3.3.1
TWRP 3.3.1 for Teclast M89
The archive includes:
ZIP file for flashing via stock recovery
IMG file for flashing via fastboot
TWRP source code
Teclast M89 uses well-known firmware signature Android keys (test keys), that's why you can flash TWRP without unlocking the bootloader and erasing user data.
Installation instruction is inside the archive.
https://www.androidfilehost.com/?fid=6006931924117883832
Click to expand...
Click to collapse
This TWRP worked like a charm for me. I had already rooted via Magisk- but was really looking for a working TWRP for backing up before I really went crazy with mods.
Thanks so much!!
Jmlanner said:
This TWRP worked like a charm for me. I had already rooted via Magisk- but was really looking for a working TWRP for backing up before I really went crazy with mods.
Thanks so much!!
Click to expand...
Click to collapse
Make sure to backup nvram, nvdata, private partitions.
ValdikSS said:
Make sure to backup nvram, nvdata, private partitions.
Click to expand...
Click to collapse
Will do. I did bkk nvdata, will double check if I bkk privdata. again TK!
stuck
Hi, i tried this method but couldnt boot in system, only twrp all the time. after initial install this TWRP 3.3.1, it bootlooped in twrp but storage wasnt seen in pc, so i formatted data and restarted in twrp. from there it couldnt restart system anymore. actually i managed to flash magisk 19.3 . i flased another version of twrp 3.2.3 that seemed to work fine, to see if it was the version, and it bootloops (restarts until logo) all the time. Any hint please?
It says in little print "your device now unlocked...your device will boot in 5 seconds" but restart. Cant get it into fastboot by volume up; unresponsive at all. just bootloops in logo.
Any help is very much appreciated. thanks
voland34 said:
Hi, i tried this method but couldnt boot in system, only twrp all the time. after initial install this TWRP 3.3.1, it bootlooped in twrp but storage wasnt seen in pc, so i formatted data and restarted in twrp. from there it couldnt restart system anymore. actually i managed to flash magisk 19.3 . i flased another version of twrp 3.2.3 that seemed to work fine, to see if it was the version, and it bootloops (restarts until logo) all the time. Any hint please?
It says in little print "your device now unlocked...your device will boot in 5 seconds" but restart. Cant get it into fastboot by volume up; unresponsive at all. just bootloops in logo.
Any help is very much appreciated. thanks
Click to expand...
Click to collapse
Hi
I think you are going to have to reflash the original Rom using SPFlahtool. Then you must install Magisk Manage on tabletr. Copy the boot image from the ROM files to Your phone. Then use Magisk Manager to Patch the copied boot image. Transfer modified boot image to PC. Use fastboot to flash modified boot image back onto the tablet. The long and the short of it is - you need to find a way to patch the boot image with Magisk before any TWRP will work.
Right. The problem was accesing the tablet enough time as it stayed connected and recognized by pc only 3-5 secs, and then permanent unresponsive through buttons, but i used then sp flash to just flash boot, then preloader, then recovery from stock at every reboot. From there i could turn it off, It got out of the loop, and accesible to reflash whole stock rom. In the end i only flashed magisk through fastboot, as twrp is not so useful to me as no custom rom, so better no risks.
Thanks for your reply though
voland34 said:
Right. The problem was accesing the tablet enough time as it stayed connected and recognized by pc only 3-5 secs, and then permanent unresponsive through buttons, but i used then sp flash to just flash boot, then preloader, then recovery from stock at every reboot. From there i could turn it off, It got out of the loop, and accesible to reflash whole stock rom. In the end i only flashed magisk through fastboot, as twrp is not so useful to me as no custom rom, so better no risks.
Thanks for your reply though
Click to expand...
Click to collapse
I am glad you got your tablet running again. I had originally started out with just Magisk as root also. I do like to have a working TWRP for backing up though. You should be able now to flash the above mentioned TWRP now via SpFlashtool or fastboot.
voland34 said:
Hi, i tried this method but couldnt boot in system, only twrp all the time. after initial install this TWRP 3.3.1, it bootlooped in twrp but storage wasnt seen in pc, so i formatted data and restarted in twrp. from there it couldnt restart system anymore. actually i managed to flash magisk 19.3 . i flased another version of twrp 3.2.3 that seemed to work fine, to see if it was the version, and it bootloops (restarts until logo) all the time. Any hint please?
It says in little print "your device now unlocked...your device will boot in 5 seconds" but restart. Cant get it into fastboot by volume up; unresponsive at all. just bootloops in logo.
Any help is very much appreciated. thanks
Click to expand...
Click to collapse
It seems OEM unlock fills "para" partition with some data which forces it to boot into recovery. Stock recovery reads this data and perform data partition wipe or something similar, but TWRP does not handle this data and you get a boot loop. You can fix that by cleaning "para" partition. Execute the following command while booted into TWRP, either from TWRP terminal itself or from adb shell:
Code:
dd if=/dev/zero of=/dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/para
ValdikSS said:
It seems OEM unlock fills "para" partition with some data which forces it to boot into recovery. Stock recovery reads this data and perform data partition wipe or something similar, but TWRP does not handle this data and you get a boot loop. You can fix that by cleaning "para" partition. Execute the following command while booted into TWRP, either from TWRP terminal itself or from adb shell:
Code:
dd if=/dev/zero of=/dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/para
Click to expand...
Click to collapse
Ok, i'll try. Thanks!
Does anybody know if this guide also works for the new Teclast M89 PRO-model???
gizmo862 said:
Does anybody know if this guide also works for the new Teclast M89 PRO-model???
Click to expand...
Click to collapse
No, most probably it won't. PRO model has different SoC/CPU.
gizmo862 said:
Does anybody know if this guide also works for the new Teclast M89 PRO-model???
Click to expand...
Click to collapse
No. It won't. I bricked my ****ing tablet. It refuses to reboot once it's unlocked because (as the screen say) it is now untrusted. There is no way to relock the bootloader again and the the tablet is stuck in a bootloop.
Teclast is ****.
Hello i'm new in XDA, i have this tablet althougth i can't conect the hdmi port to the tv, the screen keep in black, i think it's because of the display format (4:3) can the root solve this problem?
Thank You!!
w1nst0n sm1th said:
No. It won't. I bricked my ****ing tablet. It refuses to reboot once it's unlocked because (as the screen say) it is now untrusted. There is no way to relock the bootloader again and the the tablet is stuck in a bootloop.
Teclast is ****.
Click to expand...
Click to collapse
The bootloop is not because you've unlocked the bootloader, but most probably because the firmware is designed to perform userdata partition setup in the recovery upon first boot, and you don't have stock recovery, that's why it can't finish formatting procedure.
This could be fixed by flashing stock recovery and booting once.
You can ask for a firmware from Teclast (I used to ask them on vkontakte because they didn't respond my mails), they will provide it.
OR you can write zeros to "para" partition using fastboot, it should do the trick too.
---------- Post added at 16:58 ---------- Previous post was at 16:56 ----------
Edgaralanmx said:
Hello i'm new in XDA, i have this tablet althougth i can't conect the hdmi port to the tv, the screen keep in black, i think it's because of the display format (4:3) can the root solve this problem?
Thank You!!
Click to expand...
Click to collapse
Try to unplug/plug again HDMI cable several times. It seems that the HDMI controller or drivers are buggy.
To change the resolution I use "SecondScreen" software (requires root).
Hi guys,
I´m looking for a working rooting method for my Teclast M89 Pro model ??
Any idea ?? What about the "One Click Root" Program ???
Thank´s a lot
The device was trying to root.
I get the following information when restarting:
orange state
the device has been unlocked and can't be trusted
your device will boot in 5 seconds
Click to expand...
Click to collapse
When I try TWRP via sideload or recovery menu I get the following:
Supported API:3
-- Install /sdcard/teclast_m89_twrp_311.zip ...
Finding update packacke ...
Opening update package ...
Verifying update package ...
Update package verification took 0.5 s (result 0).
Installing update ...
E:Failed to find META-INF/com/android/metadata in update package.
Installing Teclast M89 TWRP Recovery
script succeeded: result was [1.000000]
Install from SD Card complete.
Click to expand...
Click to collapse
But TWRP is not installed.
Where is the problem?
kumpi said:
But TWRP is not installed.
Where is the problem?
Click to expand...
Click to collapse
Are you trying to enter recovery right after flashing it, without booting the OS first? I think you need do enter TWRP right after flashing it.
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery
3. Latest adb & fastboot files
4. Stock ROM ZIP files
5. Stock Recovery [OPTIONAL]
Custom Recovery Method:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_*.zip /sdcard or MTP
3. Wipe data, cache & dalvik (format data if stuck at boot animation)
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip. Your device will have Stock Recovery with Stock ROM. Finally Reboot.
Fastboot Method:
Note: Following process formats internal storage, so backup the internal storage files. If your device is in Stock ROM & somehow system partition is messed up just flash only system.
1. Download required Fastboot files
2. If downloaded 7z files, extract system.img file.
3. Enter
Code:
fastboot -w && fastboot erase system && fastboot flash recovery recovery.img && fastboot flash boot boot.img && fastboot flash vbmeta vbmeta.img && fastboot flash dtbo dtbo.img && fastboot flash system system.img && fastboot reboot
4. It takes a while to flash System partition, have patience.
5. Device reboots to system if everything is flashed successfully.
Stock Recovery Method:
1. Download Stock ROM OZIP Files & Stock Recovery
2. Copy *.ozip to sdcard or internal storage.
2. Goto fastboot & enter fastboot flash recovery recovery.img
3. Reboot to recovery, wipe (1st option). Then go back to main menu Install from storage locate the *.ozip file & install.
I'm sorry, but this doesn't work for me..stuck with the rooted but uninstalled magisk OS.. :'(
ceesiama said:
I'm sorry, but this doesn't work for me..stuck with the rooted but uninstalled magisk OS.. :'(
Click to expand...
Click to collapse
zip isn't installed successfully? can you also send screenshot, so I can help you.
4j17h said:
zip isn't installed successfully? can you also send screenshot, so I can help you.
Click to expand...
Click to collapse
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
ceesiama said:
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
Click to expand...
Click to collapse
ok no problem, so what do you want to know about? Clear data, cache, dalvik after or before flashing stock zip it won't bootloop. Yes, since device is decrypted lock screen doesn't work. Coming to Magisk, yes that method is not reliable. I have figured out 100% working way which works for everyone & doesn't fail anytime. Maybe I will make a new guide soon or ...Mod edit: Link to Telegram removed
4j17h said:
ok no problem, so what do you want to know about? Clear data, cache, dalvik after or before flashing stock zip it won't bootloop. Coming to Magisk, yes that method is not reliable. I have figured out 100% working way which works for everyone & doesn't fail anytime. Maybe I will make a new guide soon or ...Mod edit: Link to Telegram removed
Click to expand...
Click to collapse
I'm sorry I mistyped in the above comment, when i followed your method, zip installed successfully but it bootlooped into stock recovery everytime. I hope that clarifies a bit. I''ll be very grateful if you can help me..
ceesiama said:
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
Click to expand...
Click to collapse
Try install magisk manager, maybe ur device still rooted
haditriw said:
Try install magisk manager, maybe ur device still rooted
Click to expand...
Click to collapse
no that's not how magisk works in Realme 3 Pro, if device is restarted there will be no magisk. You need to goto fastboot then goto recovery, it boots to system. We have magisk. Yes this method tricky. I am going to publish new guide, it will be simple & straight forward.
Bricked/ Bootlooping
4j17h said:
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery or Pitch Black Recovery
3. Latest adb & fastboot files
4. Stock ROM zip files: RMX1851_A15
5. Stock Recovery [OPTIONAL]
Follow the below steps:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_A15.zip /sdcard or MTP
3. Wipe data, cache & dalvik
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip, Reboot to System. You get the stock Recovery & stock ROM.
Previous Firmware: RMX1851_A14 Google Drive || AndroidFileHost || Mega Cloud storage
Note: This guide will be updated in coming days with fastboot flash files & custom recovery flashable files with latest versions.
Click to expand...
Click to collapse
pls help me, im stuck on bootlooop :'(
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
4j17h said:
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery or Pitch Black Recovery
3. Latest adb & fastboot files
4. Stock ROM zip files: RMX1851_A15
5. Stock Recovery [OPTIONAL]
Follow the below steps:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_A15.zip /sdcard or MTP
3. Wipe data, cache & dalvik
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip, Reboot to System. You get the stock Recovery & stock ROM.
Previous Firmware: RMX1851_A14 Google Drive || AndroidFileHost || Mega Cloud storage
Note: This guide will be updated in coming days with fastboot flash files & custom recovery flashable files with latest versions.
Click to expand...
Click to collapse
pls help me, im stuck on bootloop :'(
malakaz27 said:
pls help me, im stuck on bootlooop :'(
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
pls help me, im stuck on bootloop :'(
Click to expand...
Click to collapse
I have seen you have started a new thread of bootloop. Is this because you flashed one of these stock zip? you were going back to stock from los?
this method worked perfectly fine for me. i tried both lineage os roms available and both of them caused bootloop or end up destroying boot. so thanks to developer for making this zip file.
4j17h said:
I have seen you have started a new thread of bootloop. Is this because you flashed one of these stock zip? you were going back to stock from los?
Click to expand...
Click to collapse
hi i am stuck in bootloop after flashing all stuff in fastboot guide
leo77g said:
hi i am stuck in bootloop after flashing all stuff in fastboot guide
Click to expand...
Click to collapse
bootloop to recovery? have you tried fastboot -w usually this should boot to system or else flash stock recovery, wipe full. This should definitely get back the device to system.
4j17h said:
bootloop to recovery? have you tried fastboot -w usually this should boot to system or else flash stock recovery, wipe full. This should definitely get back the device to system.
Click to expand...
Click to collapse
formatting worked and thanx for help )
Moderators' Announcement: I've removed the links to Telegram and references to it. This is not a development thread, and support is to be provided through XDA. Many posts proved this has not been the case!
You may be asking, "Why was my Telegram or Whatsapp thread closed?"
Well, it's just becoming too much.
Going forward, we will only allow one Telegram chat link on a development thread by the ROM's developer and only if thorough support is still provided in the ROM thread on XDA.
All discussion channels, photography channels, whatnot channels will be strongly discouraged and removed with immediate effect. Please reference the forum rules:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Also, we now have an official XDA Discord Server. We would encourage you to try it out.
Announcing the Official XDA-Developers Discord Server
FYI
Thanks,
The Moderation Team
Click to expand...
Click to collapse
Need Help
Hi, everybody. Really need help.
There is a phone Realme X Lite. Write that it is Realme 3 Pro for the Chinese market, as well as firmware.
My version was: RMX1851_11_A.05
Tried to flash RMX1851EX_11_OTA_0150_all_2Zfcensdoezk.ozip, recovery gave an error, *_0140_* wrote that the current version is newer.
In depth test APK on the version out of the box wrote that this version of the phone is not supported, so the bootloader could not unlock.
But in the official website came across an offer to join the testing of Android Q
r1.realme.net/general/20190522/1558492614147.pdf
There are two files, the second for rollback.
I installed P2Q, everything went well, but the SnapDragon camera is used and it is terrible if there is not enough light. In depth test is not even installed, apparently not supported in the new version.
I decided to roll back, chose in Recovery Q2P archive, there were no errors, but after rebooting the phone hangs on the initial screen saver and after 10 minutes throws in the recovery with the error "Data error, select wipe data to recovery system". Wipe doesn't help. The same with other archives for Realme 3 Pro.
Also found RMX1851_11_A.12_190423_abecd1fa.ofp for firmware via MsmDownloadTool, but it requires authorization and support refuses to call login details.
Can who faced a similar problem on this or other phone.
Please help, pay for the time spent =)
ResSetOk said:
Hi, everybody. Really need help.
There is a phone Realme X Lite. Write that it is Realme 3 Pro for the Chinese market, as well as firmware.
My version was: RMX1851_11_A.05
Tried to flash RMX1851EX_11_OTA_0150_all_2Zfcensdoezk.ozip, recovery gave an error, *_0140_* wrote that the current version is newer.
In depth test APK on the version out of the box wrote that this version of the phone is not supported, so the bootloader could not unlock.
But in the official website came across an offer to join the testing of Android Q
r1.realme.net/general/20190522/1558492614147.pdf
There are two files, the second for rollback.
I installed P2Q, everything went well, but the SnapDragon camera is used and it is terrible if there is not enough light. In depth test is not even installed, apparently not supported in the new version.
I decided to roll back, chose in Recovery Q2P archive, there were no errors, but after rebooting the phone hangs on the initial screen saver and after 10 minutes throws in the recovery with the error "Data error, select wipe data to recovery system". Wipe doesn't help. The same with other archives for Realme 3 Pro.
Also found RMX1851_11_A.12_190423_abecd1fa.ofp for firmware via MsmDownloadTool, but it requires authorization and support refuses to call login details.
Can who faced a similar problem on this or other phone.
Please help, pay for the time spent =)
Click to expand...
Click to collapse
since your bootloader is locked, all you can do is wipe full data or flash back P2Q then format & then flash Q2P.
4j17h said:
since your bootloader is locked, all you can do is wipe full data or flash back P2Q then format & then flash Q2P.
Click to expand...
Click to collapse
I did Wipe before and after firmware, on P2Q is stitched without problems, but under firmware in Q2P in recovery writes, that not managed wipe userdata. The data was not encrypted, the password is not asked.
do you have video for Fastboot Method ?
[No message]
Goodmorning everyone
I have a problem on my TF300TG which I picked up from my drawer after a while
I upgraded to 7.1 nougat following the instructions given in the letter (very clear) but now my tablet does not start the system, I explain better:
it turns on and the writing unlock remains The device is unlocked with the ASUS logo in the Center but does not start.
I can go back to recover twrp at any time and reflect what I have repeated several times even with different versions but I always have the same problem.
I can also re-revise the original flash blob and start again
Giangi_TF300TG said:
I upgraded to 7.1 nougat following the instructions given in the letter (very clear) but now my tablet does not start the system, I explain better:
it turns on and the writing unlock remains The device is unlocked with the ASUS logo in the Center but does not start.
I can go back to recover twrp at any time.
Click to expand...
Click to collapse
First of all format data through Kang TWRP recovery. It may take until one hour. Be patient. Let it run. After that install rom, SUSuperuser and pico Gapps in one run.
Not boot again
ebonit said:
First of all format data through Kang TWRP recovery. It may take until one hour. Be patient. Let it run. After that install rom, SUSuperuser and pico Gapps in one run.
Click to expand...
Click to collapse
I just finished the procedure that you suggested that it did not return me errors but does not boot.
just restarted of the recovery mode updates the twrp restarts and remains nailed on the Asus screen if I want I can restart in recovery.
Any other suggestions?
Giangi_TF300TG said:
I just finished the procedure that you suggested that it did not return me errors but does not boot.
just restarted of the recovery mode updates the twrp restarts and remains nailed on the Asus screen if I want I can restart in recovery.
Any other suggestions?
Click to expand...
Click to collapse
Yes, you should do carefully a Buster99: https://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
This procedure brings you back on a clean stock rom Android 4.2 Jelly Bean. Then you have to flash Kang TWRP firstly.
PS: Attention! If you restart in recovery with the 3 icons, never touch the third one in order to "Wipe Data". It bricks your device!
ebonit said:
Yes, you should do carefully a Buster99: https://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
This procedure brings you back on a clean stock rom Android 4.2 Jelly Bean. Then you have to flash Kang TWRP firstly.
PS: Attention! If you restart in recovery with the 3 icons, never touch the third one in order to "Wipe Data". It bricks your device!
Click to expand...
Click to collapse
The factory reset has been done correctly the system has restarted correctly after reinserting the nougant yet the system does not boot the only thing that has changed and that now reboots into the loop by returning to the asus screen repeatedly
Giangi_TF300TG said:
The factory reset has been done correctly the system has restarted correctly after reinserting the nougant yet the system does not boot the only thing that has changed and that now reboots into the loop by returning to the asus screen repeatedly
Click to expand...
Click to collapse
It seems there has been a big misunderstanding by you. I advised to format data through Kang TWRP, but you did a factory reset, didn't you?.
Too many people mix up wipes and formats. Format only data means, not factory reset, not wipe - you format it ext4, then convert it to f2fs. Formatting in Kang TWRP takes until 1 hour. If it went faster you did not format. Kang TWRP does a deep format that rewrites everything in the partition. No moldy leftovers.
Now your device is in a boot loop, but not bricked. So doing a Buster99 is the only way to solve the problem. If you need help with fastboot, head over to the General section. Download and install "Minimal ADB and Fastboot" on your PC.
ebonit said:
It seems there has been a big misunderstanding by you. I advised to format data through Kang TWRP, but you did a factory reset, didn't you?.
Too many people mix up wipes and formats. Format only data means, not factory reset, not wipe - you format it ext4, then convert it to f2fs. Formatting in Kang TWRP takes until 1 hour. If it went faster you did not format. Kang TWRP does a deep format that rewrites everything in the partition. No moldy leftovers.
Now your device is in a boot loop, but not bricked. So doing a Buster99 is the only way to solve the problem. If you need help with fastboot, head over to the General section. Download and install "Minimal ADB and Fastboot" on your PC.
Click to expand...
Click to collapse
Excuse me surely I did not understand here now I follow your advice step by step.
Now I'm running a buster99 but I don't need ADB, I already have a fastboot working.
PS that is I'm starting fastboot not from adb but from a folder on my pc that is executing the buster commands
Then what do I reinsert the right Kang bootloader?
Excuse my ignorance
Giangi_TF300TG said:
Excuse me surely I did not understand here now I follow your advice step by step.
Now I'm running a buster99 but I don't need ADB, I already have a fastboot working.
PS that is I'm starting fastboot not from adb but from a folder on my pc that is executing the buster commands
Then what do I reinsert the right Kang bootloader?
Excuse my ignorance
Click to expand...
Click to collapse
Now my system is restarted with the original rom I reinsert twrp_tf300t_kang_2.8.7.2.img,
after how do I proceed?
Giangi_TF300TG said:
Now my system is restarted with the original rom I reinsert twrp_tf300t_kang_2.8.7.2.img,
after how do I proceed?
Click to expand...
Click to collapse
Congratulations, good job!
Please look here: https://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479
ebonit said:
Congratulations, good job!
Please look here: https://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479
Click to expand...
Click to collapse
I have already inserted this twrp tf300t kang 2.8.7.2.img, through fastboot do I have to do it with the linux procedure?
the system now has boot recovery and starts normally with the old system.
Now that I do I have to delete the given partition or do I flash the three roms?
Giangi_TF300TG said:
I have already inserted this twrp tf300t kang 2.8.7.2.img, through fastboot do I have to do it with the linux procedure?
the system now has boot recovery and starts normally with the old system. What does old system mean?
Click to expand...
Click to collapse
I'm sorry, but it is not easy to understand what you did. As far as I know your device is on stock rom Android 4.2 Jelly Bean. Correct?
The next step should be to flash (not insert!) "twrp_tf300t_kang_2.8.7.2_signed.zip" via fastboot. The command is: "fastboot -i 0x0B05 flash recovery foo.img". Replace foo.img with the recovery image name! Did you?
If yes, you may start the device into recovery. Kang TWRP should start. After that install through TWRP Nougatella #39, pico Gapps and Super SU from the external memory of your device in one run. That's it!
Please pay attention you did download the newest versions in post #1: https://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702 !
ebonit said:
I'm sorry, but it is not easy to understand what you did. As far as I know your device is on stock rom Android 4.2 Jelly Bean. Correct?
The next step should be to flash (not insert!) "twrp_tf300t_kang_2.8.7.2_signed.zip" via fastboot. The command is: "fastboot -i 0x0B05 flash recovery foo.img". Replace foo.img with the recovery image name! Did you?
If yes, you may start the device into recovery. Kang TWRP should start. After that install through TWRP Nougatella #39, pico Gapps and Super SU from the external memory of your device in one run. That's it!
Please pay attention you did download the newest versions in post #1: https://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702 !
Click to expand...
Click to collapse
Sorry I'm using google translate
So far I have flashed the recovery twrp_tf300t_kang_2.8.7.2.img.
I restarted in recovery mod TWRP and I installed the 3 zip in sequence through sd card
KatKiss-7.1_TF300T_039.zip, open_gapps-arm-7.1-pico-20200325.zip, SuperSU-v2.82-201705271822.zip all OK
I ran Wipe cache / dalvik
I restarted
performed a first start where the bar under ASUS quickly colored blue
It has restarted
but later stuck on ASUS. I don't know where I'm wrong
From the fact that you have not replied to my last message, I think we have given up.
Just one thing I'm curious to know are there versions of this Tablet with different hardware or different firmware (bios) you can update? I don't know I thought even if I had to have a rom already cooked and functioning on an equal tablet I could shoot it in a single flash
Giangi_TF300TG said:
Sorry I'm using google translate
I don't know where I'm wrong
Click to expand...
Click to collapse
I'm sorry, but I also don't know where have been wrong? How should I reply after so less information about the situation. There are many different possibilities.
Hopefully you have a backup of the system through TWRP after finishing the Buster99. If so, please start the TWRP recovery and restore the backup.
Search here for "TF300TG": https://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702
ebonit said:
I'm sorry, but I also don't know where have been wrong? How should I reply after so less information about the situation. There are many different possibilities.
Hopefully you have a backup of the system through TWRP after finishing the Buster99. If so, please start the TWRP recovery and restore the backup.
Search here for "TF300TG": https://forum.xda-developers.com/transformer-tf300t/development/rom-t3453702
Click to expand...
Click to collapse
Sorry but once done the Buster99 procedure I don't need to do a restore of the Backup since the tablet restarts regularly with the original system I didn't perform any backup I didn't need it