Database Info

Oneplus one stuck in boot logo while updating latest TWRP 3.0.2

Hi,
was trying to install new ROM & completly wipe out OPO (Including OS). to do so got some error in zip file execution.
So tried to update TWRP (2.8.6 to 3.0.2) and now stuck into OPO boot screen.
Please help!
Thanks in advance!
BR//
Ashok

ashokyadav668 said:
Hi,
was trying to install new ROM & completly wipe out OPO (Including OS). to do so got some error in zip file execution.
So tried to update TWRP (2.8.6 to 3.0.2) and now stuck into OPO boot screen.
Please help!
Thanks in advance!
BR//
Ashok
Click to expand...
Click to collapse
Can you boot into the recovery? Or fastboot? Also before trying to install a new ROM did you backup your previous?

Durso81 said:
Can you boot into the recovery? Or fastboot? Also before trying to install a new ROM did you backup your previous?
Click to expand...
Click to collapse
Can't boot into recovery mode, maybe something went wrong while updating TWRP to 3.0.2 but can boot into fastboot.
also had backup of previous rom but since i can't boot into TWRP now so can't restore it. Earlier on TWRP 2.8.6 i was getting zip file execution error while restoring/installing new ROM.
So for now i have only access to fastboot mode, how to proceed futher?

ashokyadav668 said:
Can't boot into recovery mode, maybe something went wrong while updating TWRP to 3.0.2 but can boot into fastboot.
also had backup of previous rom but since i can't boot into TWRP now so can't restore it. Earlier on TWRP 2.8.6 i was getting zip file execution error while restoring/installing new ROM.
So for now i have only access to fastboot mode, how to proceed futher?
Click to expand...
Click to collapse
You have 2 options you can flash the stock rom and recovery via fastboot here is a guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 (Just skip step 4 don't relock the bootloader specially if you want to install TWRP) Make sure you download the correct file there is a 64gb and a 16gb listed in this guide or you can download the stock file straight from cynogen OS here https://cyngn.com/support
Or you can reinstall TWRP via fastboot by downloading TWRP here https://dl.twrp.me/bacon/ and install your backup if its still there. If its not there you can either download and install any custom rom you want or if you want the stock rom go with option 1 above and then re-install twrp. (Always remeber after installing TWRP don't fully boot into the system or you will loose TWRP, boot straight to recovery once its done flashing TWRP by holding the power button and volume down. )

Durso81 said:
You have 2 options you can flash the stock rom and recovery via fastboot here is a guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 (Just skip step 4 don't relock the bootloader specially if you want to install TWRP) Make sure you download the correct file there is a 64gb and a 16gb listed in this guide or you can download the stock file straight from cynogen OS here https://cyngn.com/support
Or you can reinstall TWRP via fastboot by downloading TWRP here https://dl.twrp.me/bacon/ and install your backup if its still there. If its not there you can either download and install any custom rom you want or if you want the stock rom go with option 1 above and then re-install twrp. (Always remeber after installing TWRP don't fully boot into the system or you will loose TWRP, boot straight to recovery once its done flashing TWRP by holding the power button and volume down. )
Click to expand...
Click to collapse
Thanks!
Do you recommend any video guide for option 2 (TWRP via Fastboot).

ashokyadav668 said:
Thanks!
Do you recommend any video guide for option 2 (TWRP via Fastboot).
Click to expand...
Click to collapse
Never watched a video so can't recommend one particular. But here is a link to all guides and how to http://forum.xda-developers.com/oneplus-one/general/index-oneplus-one-resources-compilation-t2843675
Also there is a one click tool here to make it easy
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987

ashokyadav668 said:
Thanks!
Do you recommend any video guide for option 2 (TWRP via Fastboot).
Click to expand...
Click to collapse
Thank you Durso81,
i have successfully installed TWRP & ROM.
Thanks for your time & effort for a beginner.

[guide] how to root zenfone 3 official oreo firmware

HERE IS A STEP BY STEP GUIDE TO ROOT ZENFONE 3 FOR PEOPLE WHO HAVE UNLOCKED THEIR BOOTLOADER AND ROOTED THEIR NOUGAT ROM PREVIOUSLY.
-first of you need to update your firmware to oreo.
-if you have unlocked your phone bootloader and/or rooted, you need to download and flash the latest nougat firmware through stock recovery which is 'WW-14.2020.1712.85' here https://www.asus.com/Phone/ZenFone-3-ZE552KL/HelpDesk_BIOS/
-after you finished flashing the latest nougat firmware, boot your phone as usual. and then download the official oreo firmware which is 'WW-15.0410.1712.31 here https://www.asus.com/Phone/ZenFone-3-ZE552KL/HelpDesk_BIOS/
-then put that 'WW-15.0410.1712.31' firmware to your SD card
-your phone will automatically detect an oreo firmware is available to be flashed that are located on your SD card then click on update
-then your phone will go to the updating/flashing process took around 5-10 minutes. after you're done your phone are now using the official stock firmware.
-then to proceed to root your oreo firmware, you need to flash a TWRP recovery. you can download twrp recovery here https://drive.google.com/drive/folders/1KYX8G6wgOa_X7uJfIar7ENuk2Q1nQyWB
-choose the right model for your phone either ZE520KL(5.0inch) or ZE552KL(5.5inch)
-rename the twrp recovery you just downloaded to "oreo_twrp_recovery.img"
-then put your phone to 'fastboot' mode and connect usb to laptop/pc
-put the twrp recovery that you just downloaded inside the 'Kit Root Zenfone 3' on your laptop/pc
-press shift and right click then click on 'Open command window here'
-then on cmd, type "fastboot flash recovery oreo_twrp_recovery.img" and click enter
-it will tell you flashing is finished
-then click on cmd type 'fastboot reboot' and click enter
-then your phone are now using TWRP recovery instead of the stock recovery
-next, go to magisk manager . com (no space)
-download the magisk manager apk version 5.5.5 [2.4mb]
-download magisk v15 [5.81mb] zip file
-boot your phone and install the magisk manager apk like normal
-then put the magisk v15 zip file to your SD card
-then boot your phone to TWRP recovery and flash the magisk v15 zip file
-after done, reboot system from twrp recovery
-open the magisk manager app and you're ROOTED!
done. your welcome.
[MY REVIEW OF THE OFFICIAL OREO FIRMWARE AFTER ALMOST A WEEK OF USE]
-oreo battery life sucks compare to stock nougat rom
-i can notice the battery drain faster than when im on nougat
-system performance, for me 5-10% faster than on nougat, especially the in settings or swiping the notification panel, other than its the same
-gaming performance are 10-15% worse than on nougat. when i play a game called 'Dokdo', moving the ship around the ocean are smoother when im on nougat and the framerate are stable, but when i play the game on oreo, the framerate are lower and i can feel the difference when im playing on nougat and oreo. the game feels more smoother when im on nougat compare to oreo. other games performance also noticeable when i play 'Rules of Survival', i can feel the framerate are slightly smoother on nougat compare to oreo
-there's no bugs that i found so far
[MY FINAL REVIEW OF ZENFONE 3 OFFICIAL OREO FIRMWARE]
-oreo battery life is real ****, i dont even have many apps installed and the battery life is already ****
-i prefer the nougat firmware compare to oreo.
-the only thing that i like about oreo is the quick settings icon are changed, it looks cleaner and smaller compare to nougat the quick settings icons are bigger and doesn't look good
-everyday i check on https://www.asus.com/Phone/ZenFone-3-ZE552KL/HelpDesk_BIOS/ hoping there's a new oreo firmware update saying 'battery life improved' or something thats all i want
*14 february guide updates*
incase you guys hasn't already know, there's a second(current latest) oreo updates from asus, the firmware is called 'Version WW-15.0410.1801.40'.
if you are on rooted oreo firmware 'Version WW-15.0410.1712.31' and you want to update to the latest oreo version and root it again. follow this steps below:
*NOTE: you can't proceed to flash the stock firmware if you're phone are rooted so you need to unroot or remove magisk root first before flashing the oreo firmware otherwise the flashing process will fail or a possible of bootloop will occur, so follow the steps below carefully*
-first, you need to remove magisk root by downloading the magisk uninstaller zip file from the magisk manager . com (no space) or from their xda page
-then flash/install the magisk uninstaller zip file from TWRP recovery
-after you flashed the uninstaller, you're phone are now unrooted. then you can proceed to flash the 'Version WW-15.0410.1801.40' firmware.
-after you flashed the 'Version WW-15.0410.1801.40' firmware your TWRP recovery will be replaced back to asus stock recovery
-so you need to reinstall TWRP recovery as usual through fastboot
-reboot your phone as usual and as you know your phone root access is currently gone since you uninstalled magisk earlier
-to root your phone back, download and install the latest magisk manager from their site or xda site
-click on download zip file, and put that magisk zip file on your SD CARD
-boot to twrp recovery
-flash the magisk zip file that are located on your SD CARD
-reboot system
-now your latest 'Version WW-15.0410.1801.40' firmware are now rooted again.
YES I KNOW IT IS SUCH A HASSLE, BUT THIS IS WHAT YOU MUST GET THROUGH IF YOU WANT ROOT ACCESS. ANDROID IS NOT EASY.

By the way, don't go to magiskmanager<dot>com. It's not official.
Download Magisk from the official thread here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

w1040 said:
-next, go to magisk manager . com (no space)
Click to expand...
Click to collapse
Careful with that site, as that's not an official distribution site for Magisk. There was a tweet from XDA regarding that site within the past few weeks. The only 100% trustworthy place to get it is from the official thread.
I'm getting better battery life on Oreo than I did on Nougat. I did do a factory reset after installing Oreo, though, so if you haven't done that it's worth a try.
You're right about the framerate issue with some games. Some that ran fine on Nougat get oddly choppy at times on Oreo. The last Oreo beta (although it had the same version number) was a heck of a lot worse than the release version, so hopefully the next update will help.

the reason why i put the magisk manager official site is because i rooted my phone by downloading both the magisk manager apk and the zip file and the app and the zip file from their official site works for rooting my phone so i think there is no harm. if you feel insecure you can just go to https://forum.xda-developers.com/app...mless-t3473445

Not working.
I exactly followed the steps but I could not install twrp. Stock recovery still keeps running.
However, If I use the previous version of twrp (20180203) phone cannot boot, then had to flash roms from M to O.
Edit: I tried over and over again and succeeded at last, but I do not know how exactly!

asenler said:
I exactly followed the steps but I could not install twrp. Stock recovery still keeps running.
However, If I use the previous version of twrp (20180203) phone cannot boot, then had to flash roms from M to O.
Edit: I tried over and over again and succeeded at last, but I do not know how exactly!
Click to expand...
Click to collapse
at cmd when you're phone on fastboot. after you typed "fastboot flash recovery (name of your recovery)".img and enter, make sure it says flashing successful.

new firmware
How about ZE552KL_ WW_15.0410.1801.40 ?

asenler said:
How about ZE552KL_ WW_15.0410.1801.40 ?
Click to expand...
Click to collapse
what about it? i have yet to flash it

So the same procedure applies.
Flash the update + go to fastboot + re-install magisk.
Success.
Thanks everyone.

asenler said:
So the same procedure applies.
Flash the update + go to fastboot + re-install magisk.
Success.
Thanks everyone.
Click to expand...
Click to collapse
yes, its the same procedure. the latest firmware update is still oreo afterall

GUIDE UPDATES - 14 february

Hi !
So yesterday I tried flashing TWRP but no luck.
I'm on the latest firmware (1801), bootloader unlocked, stock recovery with no root.
When I try to flash TWRP with fastboot, I get no error message but I still have the stock recovery instead of TWRP.
I tried multiple times and downloaded the file again but it doesn't work.
Any idea ?

aftee you flashed twrp through fastboot. type on "fastboot reboot" on cmd. then if your phone directs you to stock recovery instead of twrp. click on reboot system in your stock recovery. then it will brings you to twrp. i know its weird. but thats what happen to me too at first.
then if you finally got to twrp and you reboot system from twrp but your phone still brings you back to twrp recovery everytime or it stucks on asus logo (bootloop), dont panic, go to twrp and flash your stock oreo firmware that are located from ur sdcard from twrp, then when you reboot system from twrp, then your phone will boot to normal. dont worry it wont erase data.
try this. it works for me.

Guys. Can I use the above, android already oreo but not in unlock bootloader.

Putra.dim said:
Guys. Can I use the above, android already oreo but not in unlock bootloader.
Click to expand...
Click to collapse
its not possible to root zenfone 3 without unlocking bootloader.

w1040 said:
its not possible to root zenfone 3 without unlocking bootloader.
Click to expand...
Click to collapse
I've been looking for how to unlock zen 3 oroe. but i did not find it. please help me. i want to root my phone.

Here is the official unlock method.
You will not be able to get OTA updates then, but zenfone3 may not get any upgrade anyway.

I found the solution to my problem (couldn't boot into twrp after flashing it)
1-After flashing twrp, do not fastboot reboot !
2-Unplug the device
3-Power it off (long press power key)
4-Power it on into recovery mod (long press power key + low volume key)
You should end up in twrp recovery or on a screen suggesting to boot into recovery which you do
5-A message will appear asking to allow modification of twrp recovery. Swipe to allow.
6-Done !

w1040 said:
aftee you flashed twrp through fastboot. type on "fastboot reboot" on cmd. then if your phone directs you to stock recovery instead of twrp. click on reboot system in your stock recovery. then it will brings you to twrp. i know its weird. but thats what happen to me too at first.
then if you finally got to twrp and you reboot system from twrp but your phone still brings you back to twrp recovery everytime or it stucks on asus logo (bootloop), dont panic, go to twrp and flash your stock oreo firmware that are located from ur sdcard from twrp, then when you reboot system from twrp, then your phone will boot to normal. dont worry it wont erase data.
try this. it works for me.
Click to expand...
Click to collapse
After updating on 15.0410.1801.40, i flash TWRP through fastboot, and i get stuck in bootloop on Asus logo. I go back in TWRP,flash the 15.0410.1801.40 zip, and i remain in bootloop.
With a custom recovery, we didn't need any No Verity File Encrypt like root in Nougat? (On nougat I root my ZE552KL by following this process: https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926)

siberflyers said:
After updating on 15.0410.1801.40, i flash TWRP through fastboot, and i get stuck in bootloop on Asus logo. I go back in TWRP,flash the 15.0410.1801.40 zip, and i remain in bootloop.
With a custom recovery, we didn't need any No Verity File Encrypt like root in Nougat? (On nougat I root my ZE552KL by following this process: https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926)
Click to expand...
Click to collapse
if you got bootloop after trying to reboot ur phone from twrp after flashing twrp. flashing the stock oreo rom from twrp again will make your phone boot. thats how i did it. im not sure why it doesn't work for you.
we still need "no verity..." message in oreo. that no verity message appears are actually caused by your phone bootloader unlocked not because of your phone rooted.

[TWRP][OFFICIAL] TWRP 3.3.x for UMIDIGI One Max [MT6763]

This TWRP recovery is compiled from source & not official yet
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Prerequisites
1. Unlocked bootloader.
Bugs
1. No bugs
2. If you have found a bug, please consider posting it to my GitHub Issues.
Instructions
1. Go to the fastboot mode.
2. Download the recovery.img and transfer it to the adb folder.
3. Open the cmd/terminal and change directory into the adb folder.
4. Now confirm/check that device is connected by typing:-
Code:
fastboot devices
If you got your device seriel number there then you are ready to continue otherwise try connecting device again and make sure USB debugging is on and you have granted permission to the PC to debug.
5. After that we will flash this TWRP recovery to the recovery partition by below command:-
Code:
fastboot flash recovery twrp-name.img
BooM ! TWRP flashed successfully.
6. Now unplug your device and then hold power button untill the phone turned off,after that press power button while holding vol down(-) button simultaneously and you will boot into TWRP recovery mode.
Enjoy !
Downloads
Official TWRP Website : https://twrp.me/umidigi/onemax.html
GitHub Release : Here (release name : TWRP-UMIDIGI-One_Max)
Version Information
ROM OS Version: 8.1.x Oreo
Source Code: Device Tree
Based On: TWRP
Credits
Omni Team for minimal TWRP source
@chankruze (myself) for device tree and compilation.
SUPPORT
Official Telegram Group
Official Telegram Channel

Hey ! Good job ! I tried building my own TWRP today but then noticed someone already did it ! Does encryption work ? I cant seem to decrypt the partition after flashing your TWRP.
EDIT : Couldn't wait, ended up formatting with encryption disabled via a zip + magisk
I've then proceeded to flash some GSI for Android 9 (even tried Q Beta 3) and if we want 9.0 one day, some heavy work will be needed : Cellular doesn't work; other than that, it all seems fine to me, camera is only 12mpx, front is 13mpx. Haven't tested more, i'm back to stock
EDIT 2: After comparing camera from stock and gsi, GSI wins easily. The camera is not as slow as stock.

Are there any decent ROMs yet for this phone? LineageOS would be fantastic.

@kgoerbig not to my knowledge. Maybe I'll try porting a 9.0 GSI soon.

I'm not sure if this is helpful or not, but Umidigi posts stock ROM on there forum. Can ROMs be ported based on there code? Or is it more complicated then that?
https://community.umidigi.com/m/?a=viewthread&tid=18692

_cab13_ said:
Hey ! Good job ! I tried building my own TWRP today but then noticed someone already did it ! Does encryption work ? I cant seem to decrypt the partition after flashing your TWRP.
EDIT : Couldn't wait, ended up formatting with encryption disabled via a zip + magisk
I've then proceeded to flash some GSI for Android 9 (even tried Q Beta 3) and if we want 9.0 one day, some heavy work will be needed : Cellular doesn't work; other than that, it all seems fine to me, camera is only 12mpx, front is 13mpx. Haven't tested more, i'm back to stock
EDIT 2: After comparing camera from stock and gsi, GSI wins easily. The camera is not as slow as stock.
Click to expand...
Click to collapse
I have tested LineageOS 16.0 GSI Android 9.0 (and many others ...) and it works well, even GSM and Camera.
The only thing I cannot have is a complete root : I install Magisk 19.3 correctly, but applications cannot get root permission (Titanium Backup cannot have su permission)

Hi to all!!!
I've unlocked bootloader, flashed twrp in post but when I power Off and On+Vol - my device doesn't power up...
Also if I make fastboot reboot recovery, my device reboot in fastboot mode again...
What's wrong??? I would test Descendant_ThreeDotZero_arm64_aonly rom!!!!
Pls Help me!!!!

silviuss82 said:
Hi to all!!!
I've unlocked bootloader, flashed twrp in post but when I power Off and On+Vol - my device doesn't power up...
Also if I make fastboot reboot recovery, my device reboot in fastboot mode again...
What's wrong??? I would test Descendant_ThreeDotZero_arm64_aonly rom!!!!
Pls Help me!!!!
Click to expand...
Click to collapse
If you use the stock boot.img with an GSI system image, it will not boot, you must first flash Magisk.zip before reboot!
It will disable dm-verity, and you can boot after.
If it continue reboot in bootloader mode, use spflashtool to flash a stock rom and all will be right
Or if you have a TWRP backup, restore all partitions except boot/recovery/cache/system/data and you can boot

@ dreambo Can you make a writeup of properly unlocking the bootloader/rooting? Or did you use these methods?
https://community.umidigi.com/forum.php?mod=viewthread&tid=17376
https://www.youtube.com/watch?v=xM_M5XP--Z8&t=176s
I should be receiving my Umidigi One Max in a day or so, and do not want to bork anything up! I have SPflash installed both on a Win10 laptop, and on a Ubuntu Linux machine.
dreambo said:
If you use the stock boot.img with an GSI system image, it will not boot, you must first flash Magisk.zip before reboot!
It will disable dm-verity, and you can boot after.
If it continue reboot in bootloader mode, use spflashtool to flash a stock rom and all will be right
Or if you have a TWRP backup, restore all partitions except boot/recovery/cache/system/data and you can boot
Click to expand...
Click to collapse

kgoerbig said:
@ dreambo Can you make a writeup of properly unlocking the bootloader/rooting? Or did you use these methods?
https://community.umidigi.com/forum.php?mod=viewthread&tid=17376
https://www.youtube.com/watch?v=xM_M5XP--Z8&t=176s
I should be receiving my Umidigi One Max in a day or so, and do not want to bork anything up! I have SPflash installed both on a Win10 laptop, and on a Ubuntu Linux machine.
Click to expand...
Click to collapse
You do not need to unlock you phone, mine is rooted with Magisk and have TWRP installed without unlock bootloader.
Just use spflashtool to flash a stock rom, but replace the recovery by TWRP and the boot.img by magisk_patched.img one.
Here how I do exactly:
1- in my running stock rom, I install MagiskManager and install Magisk by choosing the last option (patch existing boot.img)
2- give it your stock boot.img (extracted from stock rom) and it create for you /sdcard/Download/magisk_patched.img
3- use this to replace your stock boot.img and use also TWRP.img to replace stock recovery.img and flash the whole rom with SPFlashTool

Can you backup with TWRP with a locked bootloader? Isn't write access blocked with a locked bootloader?
dreambo said:
You do not need to unlock you phone, mine is rooted with Magisk and have TWRP installed without unlock bootloader.
Just use spflashtool to flash a stock rom, but replace the recovery by TWRP and the boot.img by magisk_patched.img one.
Here how I do exactly:
1- in my running stock rom, I install MagiskManager and install Magisk by choosing the last option (patch existing boot.img)
2- give it your stock boot.img (extracted from stock rom) and it create for you /sdcard/Download/magisk_patched.img
3- use this to replace your stock boot.img and use also TWRP.img to replace stock recovery.img and flash the whole rom with SPFlashTool
Click to expand...
Click to collapse

kgoerbig said:
Can you backup with TWRP with a locked bootloader? Isn't write access blocked with a locked bootloader?
Click to expand...
Click to collapse
If you can run the TWRP with a locked bootloader (and you can in case of umidigi one max) you can do any thing

dreambo said:
If you can run the TWRP with a locked bootloader (and you can in case of umidigi one max) you can do any thing
Click to expand...
Click to collapse
One last question. =)
Which boot file from stock did you use to patch with?
Downloadable from: https://community.umidigi.com/forum.php?mod=forumdisplay&fid=211
UMIDIGI One Max V1.0
or
UMIDIGI One Max E V1.0

kgoerbig said:
One last question. =)
Which boot file from stock did you use to patch with?
Downloadable from: https://community.umidigi.com/forum.php?mod=forumdisplay&fid=211
UMIDIGI One Max V1.0
or
UMIDIGI One Max E V1.0
Click to expand...
Click to collapse
I have used the European one, UMIDIGI One Max E V1.0

So I just received my One Max today. I was able to patch the boot image, and root the phone. I also, installed TWRP, but I'm running into an issue. From TWRP, I formatted with a normal wipe, It asked "Do you want to do this, it wipes data encryption Etc". I typed yes, and it did it's thing. Rebooted. Setup my basic settings on the phone. I rebooted back into TWRP, and it immediatly asked for a "decryption" password. It also won't allow me to mount internal partitions or sdcard. This even after I rooted via a patched boot file, and verified root access while booted in android (with root verify app). What am I doing wrong for TWRP to gain access to storage?

"Couldn't wait, ended up formatting with encryption disabled via a zip + magisk"
How did you format without encryption? I try to format from TWRP, type 'yes' , to verify, and encryption is still active. I'd like to disable encryption, so that I can properly backup everything from TWRP.

kgoerbig said:
So I just received my One Max today. I was able to patch the boot image, and root the phone. I also, installed TWRP, but I'm running into an issue. From TWRP, I formatted with a normal wipe, It asked "Do you want to do this, it wipes data encryption Etc". I typed yes, and it did it's thing. Rebooted. Setup my basic settings on the phone. I rebooted back into TWRP, and it immediatly asked for a "decryption" password. It also won't allow me to mount internal partitions or sdcard. This even after I rooted via a patched boot file, and verified root access while booted in android (with root verify app). What am I doing wrong for TWRP to gain access to storage?
Click to expand...
Click to collapse
Search in xda forum a zip that you can flash with TWRP before installing the Magisk zip from TWRP.
its name is disable_dm_verity????.zip, it disable in the boot.img the encryption.
After that format the data partition (format and not wipe, it's important!) and reboot normally, and your data partition will not be encrypted

dreambo said:
Search in xda forum a zip that you can flash with TWRP before installing the Magisk zip from TWRP.
its name is disable_dm_verity????.zip, it disable in the boot.img the encryption.
After that format the data partition (format and not wipe, it's important!) and reboot normally, and your data partition will not be encrypted
Click to expand...
Click to collapse
I eventually found all the correct files to remove encryption. I also installed AOSP. I'm kind of torn between the stock and AOSP. AOSP has better performance, but one annoying aspect is that I cannot find anywhere in the settings to switch the navigation buttons in AOSP (Back button is on the far left, I like it on the right side). Seems trivial, but it's annoying. I can now fully backup & restore in TWRP, which makes life a lot easier.

kgoerbig said:
I eventually found all the correct files to remove encryption. I also installed AOSP. I'm kind of torn between the stock and AOSP. AOSP has better performance, but one annoying aspect is that I cannot find anywhere in the settings to switch the navigation buttons in AOSP (Back button is on the far left, I like it on the right side). Seems trivial, but it's annoying. I can now fully backup & restore in TWRP, which makes life a lot easier.
Click to expand...
Click to collapse
Which AOSP ? where do you found it ?

dreambo said:
Which AOSP ? where do you found it ?
Click to expand...
Click to collapse
This thread:
https://forum.xda-developers.com/android/development/umidigi-one-max-custom-rom-modding-t3942521
This Rom
https://github.com/phhusson/treble_experimentations/releases
Do a complete backup of stock from TWRP onto microsd or USB first! System, data, modem, nvram partitions etc. That way you can restore from TWRP, and not lose os, data, or nvram (IMEI).
Specifically, system-arm64-aonly-gapps-su.img.xz
1. Download and extract file you downloaded, onto your phone.
2. Do a format (type yes)
3. Install from TWRP as "image".

GUIDE | Go Back to Stock ROM | Recovery | Fastboot

Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery
3. Latest adb & fastboot files
4. Stock ROM ZIP files
5. Stock Recovery [OPTIONAL]
Custom Recovery Method:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_*.zip /sdcard or MTP
3. Wipe data, cache & dalvik (format data if stuck at boot animation)
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip. Your device will have Stock Recovery with Stock ROM. Finally Reboot.
Fastboot Method:
Note: Following process formats internal storage, so backup the internal storage files. If your device is in Stock ROM & somehow system partition is messed up just flash only system.
1. Download required Fastboot files
2. If downloaded 7z files, extract system.img file.
3. Enter
Code:
fastboot -w && fastboot erase system && fastboot flash recovery recovery.img && fastboot flash boot boot.img && fastboot flash vbmeta vbmeta.img && fastboot flash dtbo dtbo.img && fastboot flash system system.img && fastboot reboot
4. It takes a while to flash System partition, have patience.
5. Device reboots to system if everything is flashed successfully.
Stock Recovery Method:
1. Download Stock ROM OZIP Files & Stock Recovery
2. Copy *.ozip to sdcard or internal storage.
2. Goto fastboot & enter fastboot flash recovery recovery.img
3. Reboot to recovery, wipe (1st option). Then go back to main menu Install from storage locate the *.ozip file & install.

I'm sorry, but this doesn't work for me..stuck with the rooted but uninstalled magisk OS.. :'(

ceesiama said:
I'm sorry, but this doesn't work for me..stuck with the rooted but uninstalled magisk OS.. :'(
Click to expand...
Click to collapse
zip isn't installed successfully? can you also send screenshot, so I can help you.

4j17h said:
zip isn't installed successfully? can you also send screenshot, so I can help you.
Click to expand...
Click to collapse
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(

ceesiama said:
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
Click to expand...
Click to collapse
ok no problem, so what do you want to know about? Clear data, cache, dalvik after or before flashing stock zip it won't bootloop. Yes, since device is decrypted lock screen doesn't work. Coming to Magisk, yes that method is not reliable. I have figured out 100% working way which works for everyone & doesn't fail anytime. Maybe I will make a new guide soon or ...Mod edit: Link to Telegram removed

4j17h said:
ok no problem, so what do you want to know about? Clear data, cache, dalvik after or before flashing stock zip it won't bootloop. Coming to Magisk, yes that method is not reliable. I have figured out 100% working way which works for everyone & doesn't fail anytime. Maybe I will make a new guide soon or ...Mod edit: Link to Telegram removed
Click to expand...
Click to collapse
I'm sorry I mistyped in the above comment, when i followed your method, zip installed successfully but it bootlooped into stock recovery everytime. I hope that clarifies a bit. I''ll be very grateful if you can help me..

ceesiama said:
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
Click to expand...
Click to collapse
Try install magisk manager, maybe ur device still rooted

haditriw said:
Try install magisk manager, maybe ur device still rooted
Click to expand...
Click to collapse
no that's not how magisk works in Realme 3 Pro, if device is restarted there will be no magisk. You need to goto fastboot then goto recovery, it boots to system. We have magisk. Yes this method tricky. I am going to publish new guide, it will be simple & straight forward.

Bricked/ Bootlooping
4j17h said:
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery or Pitch Black Recovery
3. Latest adb & fastboot files
4. Stock ROM zip files: RMX1851_A15
5. Stock Recovery [OPTIONAL]
Follow the below steps:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_A15.zip /sdcard or MTP
3. Wipe data, cache & dalvik
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip, Reboot to System. You get the stock Recovery & stock ROM.
Previous Firmware: RMX1851_A14 Google Drive || AndroidFileHost || Mega Cloud storage
Note: This guide will be updated in coming days with fastboot flash files & custom recovery flashable files with latest versions.
Click to expand...
Click to collapse
pls help me, im stuck on bootlooop :'(
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
4j17h said:
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery or Pitch Black Recovery
3. Latest adb & fastboot files
4. Stock ROM zip files: RMX1851_A15
5. Stock Recovery [OPTIONAL]
Follow the below steps:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_A15.zip /sdcard or MTP
3. Wipe data, cache & dalvik
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip, Reboot to System. You get the stock Recovery & stock ROM.
Previous Firmware: RMX1851_A14 Google Drive || AndroidFileHost || Mega Cloud storage
Note: This guide will be updated in coming days with fastboot flash files & custom recovery flashable files with latest versions.
Click to expand...
Click to collapse
pls help me, im stuck on bootloop :'(

malakaz27 said:
pls help me, im stuck on bootlooop :'(
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
pls help me, im stuck on bootloop :'(
Click to expand...
Click to collapse
I have seen you have started a new thread of bootloop. Is this because you flashed one of these stock zip? you were going back to stock from los?

this method worked perfectly fine for me. i tried both lineage os roms available and both of them caused bootloop or end up destroying boot. so thanks to developer for making this zip file.

4j17h said:
I have seen you have started a new thread of bootloop. Is this because you flashed one of these stock zip? you were going back to stock from los?
Click to expand...
Click to collapse
hi i am stuck in bootloop after flashing all stuff in fastboot guide

leo77g said:
hi i am stuck in bootloop after flashing all stuff in fastboot guide
Click to expand...
Click to collapse
bootloop to recovery? have you tried fastboot -w usually this should boot to system or else flash stock recovery, wipe full. This should definitely get back the device to system.

4j17h said:
bootloop to recovery? have you tried fastboot -w usually this should boot to system or else flash stock recovery, wipe full. This should definitely get back the device to system.
Click to expand...
Click to collapse
formatting worked and thanx for help )

Moderators' Announcement: I've removed the links to Telegram and references to it. This is not a development thread, and support is to be provided through XDA. Many posts proved this has not been the case!
You may be asking, "Why was my Telegram or Whatsapp thread closed?"
Well, it's just becoming too much.
Going forward, we will only allow one Telegram chat link on a development thread by the ROM's developer and only if thorough support is still provided in the ROM thread on XDA.
All discussion channels, photography channels, whatnot channels will be strongly discouraged and removed with immediate effect. Please reference the forum rules:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Also, we now have an official XDA Discord Server. We would encourage you to try it out.
Announcing the Official XDA-Developers Discord Server
FYI
Thanks,
The Moderation Team
Click to expand...
Click to collapse

Need Help
Hi, everybody. Really need help.
There is a phone Realme X Lite. Write that it is Realme 3 Pro for the Chinese market, as well as firmware.
My version was: RMX1851_11_A.05
Tried to flash RMX1851EX_11_OTA_0150_all_2Zfcensdoezk.ozip, recovery gave an error, *_0140_* wrote that the current version is newer.
In depth test APK on the version out of the box wrote that this version of the phone is not supported, so the bootloader could not unlock.
But in the official website came across an offer to join the testing of Android Q
r1.realme.net/general/20190522/1558492614147.pdf
There are two files, the second for rollback.
I installed P2Q, everything went well, but the SnapDragon camera is used and it is terrible if there is not enough light. In depth test is not even installed, apparently not supported in the new version.
I decided to roll back, chose in Recovery Q2P archive, there were no errors, but after rebooting the phone hangs on the initial screen saver and after 10 minutes throws in the recovery with the error "Data error, select wipe data to recovery system". Wipe doesn't help. The same with other archives for Realme 3 Pro.
Also found RMX1851_11_A.12_190423_abecd1fa.ofp for firmware via MsmDownloadTool, but it requires authorization and support refuses to call login details.
Can who faced a similar problem on this or other phone.
Please help, pay for the time spent =)

ResSetOk said:
Hi, everybody. Really need help.
There is a phone Realme X Lite. Write that it is Realme 3 Pro for the Chinese market, as well as firmware.
My version was: RMX1851_11_A.05
Tried to flash RMX1851EX_11_OTA_0150_all_2Zfcensdoezk.ozip, recovery gave an error, *_0140_* wrote that the current version is newer.
In depth test APK on the version out of the box wrote that this version of the phone is not supported, so the bootloader could not unlock.
But in the official website came across an offer to join the testing of Android Q
r1.realme.net/general/20190522/1558492614147.pdf
There are two files, the second for rollback.
I installed P2Q, everything went well, but the SnapDragon camera is used and it is terrible if there is not enough light. In depth test is not even installed, apparently not supported in the new version.
I decided to roll back, chose in Recovery Q2P archive, there were no errors, but after rebooting the phone hangs on the initial screen saver and after 10 minutes throws in the recovery with the error "Data error, select wipe data to recovery system". Wipe doesn't help. The same with other archives for Realme 3 Pro.
Also found RMX1851_11_A.12_190423_abecd1fa.ofp for firmware via MsmDownloadTool, but it requires authorization and support refuses to call login details.
Can who faced a similar problem on this or other phone.
Please help, pay for the time spent =)
Click to expand...
Click to collapse
since your bootloader is locked, all you can do is wipe full data or flash back P2Q then format & then flash Q2P.

4j17h said:
since your bootloader is locked, all you can do is wipe full data or flash back P2Q then format & then flash Q2P.
Click to expand...
Click to collapse
I did Wipe before and after firmware, on P2Q is stitched without problems, but under firmware in Q2P in recovery writes, that not managed wipe userdata. The data was not encrypted, the password is not asked.

do you have video for Fastboot Method ?

[No message]

[ROM][HUAWEI MEDIAPAD T3 10 AGS-W09][UNOFFICIAL] | Custom stock Rom

KINDLY CHECK THE LATEST POST. I HAVE AN UPDATE REGARDING THIS ROM.​------------------------------------------------------------------​THIS IS NOT A CUSTOM ROM! IS A MODIFIED VERSION OF THE ORIGINAL ROM!​​
Code:
Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
FLASHING PROCEDURE
Download the latest build
Reboot to recovery
Take Backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build
Reboot
Done!
DOWNLOAD LINK:​V1.0​​
IMPROVED
Faster scroll
Deleted bloatware apps (More space)
More coming in the future!

Firstly, thanks for taking the time to make this, it's appreciated.
I have followed your instructions to the best of my abilities:
*Reboot to recovery (TWRP)
*Wipe System, Data, Cache , Dalvik
*Flash the latest build
*Reboot
but now TWRP is telling me there is no OS? WTF? Help!!
I can still boot into TWRP recovery and fastboot if needed but would prefer to maintain root if at all possible.

iFink said:
Firstly, thanks for taking the time to make this, it's appreciated.
I have followed your instructions to the best of my abilities:
*Reboot to recovery (TWRP)
*Wipe System, Data, Cache , Dalvik
*Flash the latest build
*Reboot
but now TWRP is telling me there is no OS? WTF? Help!!
I can still boot into TWRP recovery and fastboot if needed but would prefer to maintain root if at all possible.
Click to expand...
Click to collapse
If you reboot, it boots? And if you want root, you can use magisk

When i reboot it boots straight to Huawei eRecovery not normal system

If you or someone can help me, because this is my first rom.
I don't knwow why is booting in Huawei eRecovery...
But, if you extract, try to repack system.img and flash with fastboot the file "system.img" (the repacked file)

AndroTwrpid said:
If you or someone can help me, because this is my first rom.
I don't knwow why is booting in Huawei eRecovery...
But, if you extract, try to repack system.img and flash with fastboot the file "system.img" (the repacked file)
Click to expand...
Click to collapse
Hi
On my huawei mediapad t3 tablet, I wanted to do a factory reset on TWRP and by mistake I selected "system". By trying the custom installation goes well but when I reboot the tablet hangs on "your device booting now ..."
Can someone help me

I found solution , i posted it to help anyone : #Poste318

Hmm good to see people using this device still!!

Hi,
Many thanks for creating this ROM.
I am wondering if you can help me, I am fairly new to flashing.
I managed to unlock the bootloader and flash TWRP no problem.
In TWRP, I have tried to flash this rom using your instructions, with the exception of flashing Magisk 21.2 immediately after (before reboot). I did also do a format aswell as advanced wipe on the partitions you mentioned, was this my mistake?
Now i just get "Your device is booting now" which never happens.
I went back into TWRP and repeated the process, also flashed a Magisk uninstaller script just incase, then repeated the process again. Still getting the same problem after about 4 attempts.
Do I need to go back to stock and start again?
If so, any help on that would also be appreciated!
Thanks

A better solution is to extract the zip, then boot in twrp mode, then move the system.img to internal storage, click install, select the img file, then choose "system" and done.

Someone here has managed to install this successfully?

twolitrepinto said:
Hi,
Many thanks for creating this ROM.
I am wondering if you can help me, I am fairly new to flashing.
I managed to unlock the bootloader and flash TWRP no problem.
In TWRP, I have tried to flash this rom using your instructions, with the exception of flashing Magisk 21.2 immediately after (before reboot). I did also do a format aswell as advanced wipe on the partitions you mentioned, was this my mistake?
Now i just get "Your device is booting now" which never happens.
I went back into TWRP and repeated the process, also flashed a Magisk uninstaller script just incase, then repeated the process again. Still getting the same problem after about 4 attempts.
Do I need to go back to stock and start again?
If so, any help on that would also be appreciated!
Thanks
Click to expand...
Click to collapse
Hello,
Sorry, this is a bit of off topic, can you tell me how you rooted your device? i can't seem to root mine.
I am totally a noob.

Does this rom fully work?
Thanks for your answer.

gr981888 said:
Hello,
Sorry, this is a bit of off topic, can you tell me how you rooted your device? i can't seem to root mine.
I am totally a noob.
Click to expand...
Click to collapse
You need to first go to dc-unlocker.com, then buy 4 credits, download the software and login in your account in the software. Then enable on the tablet usb debugging and click the magnifying glass and you will get the bootloader code. Then insert the usb cable in the tablet, then go in fastboot mode then open cmd and type: "fastboot oem unlock code" (replace code with the code obtained in dc unlocker) then on the tablet click yes and your tablet will format. done.

Chris_wafer said:
Does this rom fully work?
Thanks for your answer.
Click to expand...
Click to collapse
I don't tested.

Does sanyone have an updated download link? The one on the original post is broken

Lane-boy21 said:
Does sanyone have an updated download link? The one on the original post is broken
Click to expand...
Click to collapse
hey, i lost the files sorry, i'm trying to find it.

I will put the same does anyone can update the download link please ?

Lane-boy21 said:
Does sanyone have an updated download link? The one on the original post is broken
Click to expand...
Click to collapse
Did you get that link in the end ?

Me too