After a recent major update in February, the apps started downloading from samsung store which I've disabled prior to update. All of a sudden my screen got hung and i've restarted and thought it's pretty normal but to my surprise it got struck in the boot loop. I took to s samsung service center and they said they would hard reset but after 15 minutes to my surprise they said something might be wrong with the board and they said they have to replace the board and it would cost me 7k. After a day to my surprise it started normally and after 5 minutes it froze and once again into boot loop. It happened twice but now i'm unable to do this again. I downloaded odin, the latest firmware, but whenever i connect my usb cable it says "USB not recognised'. I've installed the samsung drivers, checked on multiple usb ports, another pc ...Earlier when i got into download mode..it's green with download image and couple of lines. But now i see Product name,binary and many other text..Can anyone help me out?
I have also kind of same problem.. but my phone keep restarting whenever i used it for 2,3 minutes.
I tried installing latest firmware through odin . Still no changes.
I also tried a custom rom called priesh os which is based on one ui 3.0 .
Nothing works.
Related
I ended up sending this to Samsung for repair. Luckily my tab was still under warranty. It took them 3 times to finally get it fixed correctly. First time they replaced the main board and the data link cable plug. When I got it back it lasted about an hour before it started doing the reboot loop again. So I sent it back and that time that did a software upgrade, but they obviously didn't even test it before sending it back cuz it only lasted 30 min. then it started with the reboot loop. Before I sent it back for the 3rd time I got in contact with a manager cuz I was so frustrated at this point. That time I sent the tablet directly to her to make sure it was fixed and tested before sending it back to me. I've had it for about 2 weeks now with no problems. They replaced the main board again. So either they gave me a faulty one the first time they "fixed" it or they didn't do anything to it.
So if your tab is stuck in the reboot loop and there's nothing you can do to make it stop, contact Samsung.
I bought this about 2 weeks ago and got to use it for about 5 days.
Woke up in the middle of the night cuz I kept hearing the start up sound to my tablet. So what it does is starts up then I get a prompt saying "Unfortunately, the process com.google.process.gapps has stopped" I click ok and then another prompt that says "Unfortunately, Goole+ has stopped" with the choice of clicking "Report" of "Ok" then the screen freezes and it all starts again.
So I have about 3 - 5 seconds after it starts up and I've tried going in and doing a system restore but it crashes before I can do that. I have manged to go in and delete my google account but when it restarts my account is back.
So then I tried using the Odin3 program with every different file that I could find that would be compatible with my tab and it shows that it installs fine but nothing ever changes on the tab it self. I have tried using the Pit file and the stock rom, the stock rom alone, the pit file alone, twrp open recovery, clockwork open recovery, CF Auto Root, but no luck. I have tried having the auto reboot on and off and then rebooting it myself, still no change.
When I go into recovery mode it shows the android with a red triangle. and of course if I try to install anything from there it always does the signature fail. Which I'm guessing cuz it's not rooted. So at this point I am wondering is there a way to just completely wipe everything off and start completely over? I have wasted so much time on this POS I'm about to just throw it away. Any advice would be more greatly appreciated.
Thank you.
GT-P5100
Hi Im a new member. Im have the same trouble also.
there is an endless restart cycle, and my tablet can last only for around 10 to 15 seconds power on then it will restart again and repeat the process until the battery die.
I can only power off if i connect to the power supply.
I already tried ODIN with several stock PDA files, root with CWM and philtouch, but nothing happens. Everything is passed but there is no change on the about devices after the reboot. Then it continue the endless restart again.
When i boot in original recovery, there is an error already. if i flash zip file root, there is an error in signature.
Please help me brothers and sisters.
Any luck figuring this problem out?
OSANG said:
Hi Im a new member. Im have the same trouble also.
there is an endless restart cycle, and my tablet can last only for around 10 to 15 seconds power on then it will restart again and repeat the process until the battery die.
I can only power off if i connect to the power supply.
I already tried ODIN with several stock PDA files, root with CWM and philtouch, but nothing happens. Everything is passed but there is no change on the about devices after the reboot. Then it continue the endless restart again.
When i boot in original recovery, there is an error already. if i flash zip file root, there is an error in signature.
Please help me brothers and sisters.
Click to expand...
Click to collapse
Have you had any luck fixing this problem?
OSANG said:
Hi Im a new member. Im have the same trouble also.
there is an endless restart cycle, and my tablet can last only for around 10 to 15 seconds power on then it will restart again and repeat the process until the battery die.
I can only power off if i connect to the power supply.
I already tried ODIN with several stock PDA files, root with CWM and philtouch, but nothing happens. Everything is passed but there is no change on the about devices after the reboot. Then it continue the endless restart again.
When i boot in original recovery, there is an error already. if i flash zip file root, there is an error in signature.
Please help me brothers and sisters.
Click to expand...
Click to collapse
Same Problem with me, for me it says USB device is not recognized and I cannot sent anything from my computer now. Totally Stuck with this stupid thing.
Hi all,
Firstly I apologise for actually posting as I've spent a week trying to not be a twat and to fix it myself but alas I'm at the end of my tether.
OK I have a Tab 2 10.1 P5100 (thus with sim). I originally got it about 3 years ago in Poland and their OTAs are about as frequent as, well, they never happened. So, over the years whilst working there I flashed via Odin various official updates to get it up to scratch. Last one being Jelly Bean.
Everything has been fine until a week ago when suddenly it would boot, get to the log in screen, let me enter my pin, work for 10 seconds and then suddenly reboot. It's an endless loop but it's not stuck on booting up it just crashes ONCE started up fully.
It won't connect to Kies. Now, this is probably the rubbish cable (This is the third official cable in 3 years I've goe thru). The system restore option from manual booting does nothing and wipes nothing so I've been trying to just load an official ROM from the SD..that does nothing.
It starts to install and then goes back to the "no command" screen.
Can I simply download something onto the SD and install from there? the zip files I keep trying dont work.
Any advice is appreciated!
Hello!
Around a month ago I installed a custom rom on my Samsung Galaxy Note Pro 12.2 (SM-P905), which ran smoothly until a week ago, when my tablet suddenly wouldn't leave the Samsung Galaxy Logo screen when booting. I was also unable to access recovery (I had TWRP installed), however I was able to access download mode. Then I decided to try to install the stock firmware using Odin. It seemed fine until it was about halfway through the installation, when it seemed to disconnect and the installation failed. After several attempts this still happened. I also tried installing both TWRP and CWM, both of which passed in Odin, however I am still unable to access recovery mode. I also tried installing the custom rom, with the same results as I mentioned earlier. In addition to this the screen has also begun flickering a whole lot, both when showing the Samsung logo and when in download mode, however it seems to intensify during the latter. This, in addition to the fact that I am unable to get any response when it isn't hooked up to my computer, has led me to believe that there is some issue with the battery as well, however I am absolutelly clueless at the moment.
I also have to mention that this is my first post here and my first attempt at installing a custom rom or doing anything of this nature to my devices. Any help would really be appreciated!
mbrau said:
. In addition to this the screen has also begun flickering a whole lot, both when showing the Samsung logo and when in download mode, however it seems to intensify during the latter. This, in addition to the fact that I am unable to get any response when it isn't hooked up to my computer, has led me to believe that there is some issue with the battery as well, however I am absolutelly clueless at the moment.
Click to expand...
Click to collapse
Your battery connector needs to be re soldered first before trying to flash firmware.
Read the threat " Flickering Screen " for more information. Cracked battery connector will cause flickering screen, reboot, hang on samsung logo at boot..etc...
Hi guys, so recently I bought a Galaxy S6 Verizon off of eBay. I got it for fairly cheap because it was stuck in a boot loop. I usually have no problem fixing stuff like this, but this time is different. So the first thing I tried when I got the phone was to do a reset and cache wipe from recovery. I rebooted the phone and it showed a screen that said "Android is starting, optimizing app 9 out of 31." when it got to 21 the phone rebooted and went back to 9. It did this several times before I attempted to wipe/reset again. I then downloaded the tar file G920VVRU4CPH1 and flashed it in Odin. I did a manual reset before the phone booted, and it is doing the same thing again. reboots to a green screen where it tries to optimize apps, stays there for about 20 seconds, and reboots over and over again in the same cycle. I have tried all other stock marshmallow roms that i can find, Odin won't flash older ones, (assuming its not letting me downgrade). Also another weird thing, every time I flash, the blue update screen goes to 32%, stops, erases, and reboots. Phone is on 6.0.1 version MMB29K.G920VVRU4CPH1 as seen in recovery. Any help would be gladly appreciated. Thank you!
I am having a similar problem with loading new rom. The farthest it gets is 32%. Sometimes it doesn't get even that far.
I ended up just buying a trashed s6 and swapping the motherboards. Only way I could fix it
I had my phone just sitting on a wireless charger this morning and had been there for about 15-30 minutes. I noticed it was rebooting, odd I thought? I took it off and then realized it was going into a boot loop. I gave it a soft reset and then it would turn on and stay on for about 10 seconds before boot looping again. I again gave it a soft reset after a couple loops and now it seems to totally dead, as the title implies.
No button combination has worked and I've held them all down for well over 30 seconds each. I've tried plugging it into my PC and haven't gotten any response that way. The blue LED is on so I know it's not dead...I think? To make matters worse, I bought this phone off Craigslist about 5 months ago and it's the Exynos version so I definitely can't get any kind of warranty on it. I'm hoping someone has had this problem and can help or just has some advice. Thanks everyone.
EDIT: To keep this updated, I have been able to get into Odin Mode and have tried to flash stock firmware. Odin says everything went fine but the phone hangs up at the Samsung Galaxy S7 logo. I'm unable to boot into recovery mode and I've even tried to reinstall TWRP with Odin and that has not worked.
Seen the LED only problem before, waiting for the battery to drain and the phone to turn off seems to be the only known cure atm
Once it does, connect the charger for 15 mins, then boot directly into recovery and clear caches to try fix the bootloop, possible it may need factory resetting / clean flash of stock ROM
Using the MicroUSB > USB white adapter, you may be able to connect a power hungry USB peripheral to the phone to drain the battery faster, I use a USB desktop fan, but some people report it not working when it is stuck in this LED loop and have just had to wait it out
Thanks for that advice, I'll let it drain over night. However, I have been able to get it to boot into Odin Mode and Odin v.3 recognized it. I flashed the stock firmware but upon rebooting nothing happened and now it gets stuck at the Samsung logo screen. I can still get it back into Odin mode, which I believe will be the fastest way to kill the battery, but I find it odd that I can get into that but not recovery? I am rooted and have TWRP installed, if that matters at all.
If you can get into Download (ODIN) mode, then letting the battery drain probably won't help, that only seems to help when the phone is completely stuck with nothing but the LED working
Make sure you flash CSC (Not HOME_CSC) along with the other 3 sections of the ROM, using ODIN 3.12.3, that should factory reset the phone after the flash
If you successfully flashed stock with ODIN already, you are no longer rooted and do not have TWRP installed, flashing stock with ODIN replaces all that with stock
I updated Odin and once again tried to flash the 4 parts, making sure I used the right CSC file, but I'm still getting hung up at the Samsung Galaxy S7 logo. Do you have a suggestion as to which region's firmware I should use? I have been trying the Australia one from SamMobile's site.
EDIT: And to clarify, I have the G930FD(the duos one).
jonny727272 said:
I updated Odin and once again tried to flash the 4 parts, making sure I used the right CSC file, but I'm still getting hung up at the Samsung Galaxy S7 logo. Do you have a suggestion as to which region's firmware I should use? I have been trying the Australia one from SamMobile's site.
EDIT: And to clarify, I have the G930FD(the duos one).
Click to expand...
Click to collapse
Any region would work, and the F firmware works for the FD too