My moto e 2015 xt1521 lte doesn't bootup( it shows "boot up failed connect to pc for software repair") up and I have tried ways to revive it back but it turns out to be a failure. After some research on web I have come to the conclusion that I am in need of Moto-xt-1521 firmware for 6.0/mpi24.65-39-4/3 which is not available in any website. It would be highly appreciated if anyone is able to help me out.
JOEL JOE PIOUS said:
My moto e 2015 xt1521 lte doesn't bootup( it shows "boot up failed connect to pc for software repair") up and I have tried ways to revive it back but it turns out to be a failure. After some research on web I have come to the conclusion that I am in need of Moto-xt-1521 firmware for 6.0/mpi24.65-39-4/3 which is not available in any website. It would be highly appreciated if anyone is able to help me out.
Click to expand...
Click to collapse
I was also looking to root and reset and found image in the below link. But i don't know if it works or not.
Motorola Moto E XT1521 Firmware (Stock Flash File ROM) - Firmware File
Motorola Moto E XT1521 Firmware (flash file ROM) is used to repair stuck at the Moto Android logo quite easily. This file also help to
firmware-file.com
Related
I got a Moto G from Boost Mobile then i downloaded Blur_Version.175.44.1.falcon_cdma.Boost.en.US to downgrade my Moto G to Kitkat 4.4.2. During the flashing process i got an error message about INVALID SYSTEM IMAGE and then flash finished. Now the Moto G hangs at boot STARTING SERVICES. Then just shuts down on it's own and starts back up. It goes into a reboot loop. Can any of you show me where i can download the correct rom to flash so i can get my phone back up and working again? Any help here on getting the correct image for this phone would be greatly appreciated. Please Help!
Downgrading is not recommended. Did you flash the gpt.bin when you tried to downgrade?
no i left out gpt.bin
Zabraxis said:
no i left out gpt.bin
Click to expand...
Click to collapse
you dun goofed
well yeah lol i read somewhere in the forums to leave out gpt.bin does anyone know where to fin the Kitkat 4.4.4 for this Moto G from Boost mobile so i can flash it?
Not exactly sure if this will help but you can get the recovery image from Motorola
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1028 using xda-developers.com, powered by appyet.com
Motorola only provides recovery images for the moto x Dev edition. I don't believe a 4.4.4 stock factory image has been released yet. If you have a gsm model there is a EU 4.4.4 flashable zip available.
Zabraxis said:
I got a Moto G from Boost Mobile then i downloaded Blur_Version.175.44.1.falcon_cdma.Boost.en.US to downgrade my Moto G to Kitkat 4.4.2. During the flashing process i got an error message about INVALID SYSTEM IMAGE and then flash finished. Now the Moto G hangs at boot STARTING SERVICES. Then just shuts down on it's own and starts back up. It goes into a reboot loop. Can any of you show me where i can download the correct rom to flash so i can get my phone back up and working again? Any help here on getting the correct image for this phone would be greatly appreciated. Please Help!
Click to expand...
Click to collapse
The thread below is what you need.
http://forum.xda-developers.com/showthread.php?t=2542219
To recover a boost mobile to 4.4.4 you'll have to look around, I found it a while ago but don't remember where.
I got it figured out y'all. I found the KitKat 4.4.4 for the Moto G on Boost Mobile. I also found a way to flash my Moto G without unlocking the bootloader.
Sent from my XT1031 using XDA Free mobile app
You don't need an unlocked bootloader to flash Motorola signed firmware
Cool man thanks for the information
Sent from my XT1031 using XDA Free mobile app
Boost Moto G 4.4.4 firmware
> http://motofirmware.com/files/file/...-444-kxb2114-l157-57-release-keys-cid9xmlzip/
Can you please share how ? I messed up mine and every time I try to flash a factory AIO Wireless firmware it fails at the bootloader portion.
Thanks!
ATTACK said:
Boost Moto G 4.4.4 firmware
> LINK
Click to expand...
Click to collapse
If this works. Thanks so much. been going on for 5hrs straight without a phone looking for a fix non stop! Will edit to post results!
EDIT: It works. How the **** Did you find it I've been searching for it for hours.
barkerb23 said:
If this works. Thanks so much. been going on for 5hrs straight without a phone looking for a fix non stop! Will edit to post results!
EDIT: It works. How the **** Did you find it I've been searching for it for hours.
Click to expand...
Click to collapse
It was posted in the Droid Razr M/HD forums.
> http://motofirmware.com/
My phone is rooted. I got update from motorola. I jumped at it. But after the update the phone wont start. It gives error "No Command". kindly anyone give directions how to recover it????
Are you able to run fastboot?
Yes
Then I would suggest you flash a stock motorola firmware file using ADB/Fastboot, If you need any help with this I could reffer you to some guides or give you some instructions, this of course deletes all your data from the phone.
Hi guys, I'm kinda lost by now.
I tried to root my Moto G 1st Gen today, but whenever it was supposed to reboot again after to rooting process, I got the "dead" android with the no command warning. So I tried to some alternatives with the only result that my phone is now stuck in a bootloop. Luckily I can still access the bootloader menu, but when I try flash back to the firmware, I get the hab "check failed for boot" and recovery message, with the result that it doesn't work and I'm still in the same situation. I guess I have the wrong firmware but I can't seem to find the correct 1st gen xt1034 firmware for a german phone.
So yeah, if you could help me, that would be reaaaaally great, and if you need some additional information, I'll try my best to find it out.
Cheers
Hi,
you are sure you have an xt1034 german phone? From what I read, the xt1034 is special to America, so you should find your answer here. Good luck on reviving your phone!
I was facing problems like lags and battery/memory leaks since i got my MOTO G (XT1032) updated to 5.0.2. Then i received 5.1 but no improvement. Unfortunately, my device not going to receive 5.1.1, then i decided to downgrade it to 4.4.4. But again, my brother updated it with OTA 5.0.2 and while installation it went all black. Just LED blink while charging or using key combinations but not getting bootloader/fastboot. It is completely dead. MOTO Care say we need to change motherboard but it's not an hardware issue. So please, if someone know what is the actual issue, kindly help me.
warrior6124` said:
I was facing problems like lags and battery/memory leaks since i got my MOTO G (XT1032) updated to 5.0.2. Then i received 5.1 but no improvement. Unfortunately, my device not going to receive 5.1.1, then i decided to downgrade it to 4.4.4. But again, my brother updated it with OTA 5.0.2 and while installation it went all black. Just LED blink while charging or using key combinations but not getting bootloader/fastboot. It is completely dead. MOTO Care say we need to change motherboard but it's not an hardware issue. So please, if someone know what is the actual issue, kindly help me.
Click to expand...
Click to collapse
maybe because of bootloader..?
You flashed Bootloader repeatedly with different versions. OTA Updates also included Bootloader upgrade. You have hard-bricked your phone.
Motherboard does indeed need to be replaced, alternatively join all the other lost souls in this thread who have been waiting for almost a year for a fix:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
no fastbooty, no fixy
lost101 said:
You flashed Bootloader repeatedly with different versions. OTA Updates also included Bootloader upgrade. You have hard-bricked your phone.
Motherboard does indeed need to be replaced, alternatively join all the other lost souls in this thread who have been waiting for almost a year for a fix:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Click to expand...
Click to collapse
1). What if I get it's "BOOT IC" (instead of whole motherboard) replaced for a new one ? Will it work?
2). And what does this mean "FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)" ?
warrior6124` said:
1). What if I get it's "BOOT IC" (instead of whole motherboard) replaced for a new one ? Will it work?
2). And what does this mean "FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)" ?
Click to expand...
Click to collapse
If no-one responds here, I suggest you ask your questions in the 'Hard-Brick' thread I linked to. Regarding, solution (1) - I've never heard it proposed before, but I'm no expert in this area.
Same problem((((
Moto G (XT1032/Falcon) - Unbrick
After a whole long disappointing year of trying hands on my Moto G to unbrick it, I found a thread to unbrick it and succesfully did it.
Here is the link to XDA thread which helped me recover my device : http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788
If any of the Moto G user wants to recover his/her dead Moto G, he/she must visit the link given above.
I hope it will also work for you guys.
GOOD LUCK!!!
Hello Everyone,
I'm in need of help. I rooted my device XT 1096 and it got soft-bricked. I was able to get it working again. While it updated automatically to Lolipop, it died. Its now dead/ hard-bricked .
I tried doing the blankflash but I think my model's blank flash files aren't available yet. I took it to the market and they said it needs to be fixed with Jtag.
They have several Jtag boxes of different companies, but none of them supports my model. So I was hoping if anyone can help me find either
1) the right Blank flash files for my model (Moto X XT 1096)
or
2 ) The Dll file for the Jtag for my model. Please mention the Jtag box as well to use for that dll file.
Thank you
No Reply yet pls guys help me
Did you tried this? https://forum.xda-developers.com/moto-x-2014/general/retail-marshmallow-xt1097-mpe24-49-18-t3275894
I think this is your solution for bricked Moto X series, thanks to Gundabolu SC: https://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057