Related
the title would sum it up guys!. its a falcon! i have twrp installed, but even when i go to recovery it reboot before i can do anything! help please guys! when i go into fastboot mode (i think its called fastboot, idk i am a noob, by pressing power and volume down key) , all options are visible and its stable, i.e it does not reboot! however if i go to recovery, it starts rebooting! usb debugging is disabled! idk what to do! is there any way i can enable usb debugging via fastboot? help please!
got exactly the same problem. it would be a great help if someone could assist us @AndyCr15
Saadjamil36 said:
got exactly the same problem. it would be a great help if someone could assist us @AndyCr15
Click to expand...
Click to collapse
In case of a bootloop, I suggest you download a new rom and install it via twrp's file manager, using a pendrive/otg pendrive. Else,your can flash the stock motorola firmware using fastboot. that method always works in case of softbrick.
Tried to reflash twrp?
Debanka said:
In case of a bootloop, I suggest you download a new rom and install it via twrp's file manager, using a pendrive/otg pendrive. Else,your can flash the stock motorola firmware using fastboot. that method always works in case of softbrick.
Click to expand...
Click to collapse
Hey, thank you the problem was solved but then I installed CyanogenMod 13.0 on my moto g. After a day of use the phone automatically stopped working and i restarted it. Didnt display screen after CyanogenMod animation. I booted into TWRP recovery, was backing up data into a usb otg when the backup failed and the phone rebooted itself. Now it doesnt even display the CyanogenMod startup animation. I tried to enter twrp recovery again. It shows the main blue screen with twrp written on it but doesnt proceed further instead it restarts. I tried flashing twrp recovery again but the same problem persists. please help me out
Try flashing stock ROM, then again TWRP and CM13 via TWRP. I suggest this version of TWRP (NOTHEME version!).
Yesterday my phone died for no reason, and i've been trying everything i can to restore it...
What heleped me a little was the QFIL software, and downloading with it the Color OS.... the problem is that i can't access the fastboot, and the recovery boot only lets me wipe cache and data...
anyone knows how to acces the fast boot??? or is there a way to install CM12 and TWRP with QFIL??
I really need to preserve some data already in the phone, so i havent risked the chance to wipe everything...
xchikyx said:
Yesterday my phone died for no reason, and i've been trying everything i can to restore it...
What heleped me a little was the QFIL software, and downloading with it the Color OS.... the problem is that i can't access the fastboot, and the recovery boot only lets me wipe cache and data...
anyone knows how to acces the fast boot??? or is there a way to install CM12 and TWRP with QFIL??
I really need to preserve some data already in the phone, so i havent risked the chance to wipe everything...
Click to expand...
Click to collapse
If you're able to boot into recovery,why not in fastboot(vol+ + power)? That's strange.Also it is really a matter of doubt that you'll be able to save your data if you're not able to boot into fastboot mode.
Did you tried to flash another twrp recovery with Twrp?
Mr.Ak said:
If you're able to boot into recovery,why not in fastboot(vol+ + power)? That's strange.Also it is really a matter of doubt that you'll be able to save your data if you're not able to boot into fastboot mode.
Did you tried to flash another twrp recovery with Twrp?
Click to expand...
Click to collapse
i installed a mix of color OS + CM13 and getting into recovery and then advanced lets me reboot into fastboot, which is good... i installed TWRP, but the section with the "slide to confirm" in my phone is damaged (screen not working there) so.... i need to see how to flash everything via fastboot that it's what's been working for me...
any help witht his? tutorials everywhere list only how to install TWRPand then installing OS from there, which is impossible for my device
xchikyx said:
i installed a mix of color OS + CM13 and getting into recovery and then advanced lets me reboot into fastboot, which is good... i installed TWRP, but the section with the "slide to confirm" in my phone is damaged (screen not working there) so.... i need to see how to flash everything via fastboot that it's what's been working for me...
any help witht his? tutorials everywhere list only how to install TWRPand then installing OS from there, which is impossible for my device
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
If you want to save your internal,dont do the "userdata" command.
Mr.Ak said:
If you're able to boot into recovery,why not in fastboot(vol+ + power)? That's strange.Also it is really a matter of doubt that you'll be able to save your data if you're not able to boot into fastboot mode.
Did you tried to flash another twrp recovery with Twrp?
Click to expand...
Click to collapse
Mr.Ak said:
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
If you want to save your internal,dont do the "userdata" command.
Click to expand...
Click to collapse
thank you very much... i'lll try and comment the results
I'm getting this error in the fastboot while trying to flash system
FAILED: (remote: data too large)
xchikyx said:
I'm getting this error in the fastboot while trying to flash system
FAILED: (remote: data too large)
Click to expand...
Click to collapse
Are you using original USB cable? Try it a few more times by rebooting into fastboot mode again.
Mr.Ak said:
Are you using original USB cable? Try it a few more times by rebooting into fastboot mode again.
Click to expand...
Click to collapse
yes, i am using original cable...
and it keeps showing the data too large
UPDATE:
I installed this https://forum.xda-developers.com/showthread.php?t=2317790 and seems to be working
xchikyx said:
yes, i am using original cable...
and it keeps showing the data too large
UPDATE:
I installed this https://forum.xda-developers.com/showthread.php?t=2317790 and seems to be working
Click to expand...
Click to collapse
I'm glad it worked.
But I didn't thought that It was a driver issue as you were able to do other commands just fine but anyways the good thing is ,it worked.:fingers-crossed:
Mr.Ak said:
I'm glad it worked.
But I didn't thought that It was a driver issue as you were able to do other commands just fine but anyways the good thing is ,it worked.:fingers-crossed:
Click to expand...
Click to collapse
yeah, now i need to find a way to install the Gapps... i need a) another recovery that doesnt use the bottom part of the screen (so, no TWRP) ; b) gapps in a IMG file
any idea?
xchikyx said:
yeah, now i need to find a way to install the Gapps... i need a) another recovery that doesnt use the bottom part of the screen (so, no TWRP) ; b) gapps in a IMG file
any idea?
Click to expand...
Click to collapse
Cos13.1.x already has Gapps mate.Btw,im wondering how you use bacon with broken touch? Screen mirroring to PC?
Just FYI,lcd+digitizer replacement doesn't cost much and even you can replace it at home.I did myself a few months ago.
Mr.Ak said:
Cos13.1.x already has Gapps mate.Btw,im wondering how you use bacon with broken touch? Screen mirroring to PC?
Just FYI,lcd+digitizer replacement doesn't cost much and even you can replace it at home.I did myself a few months ago.
Click to expand...
Click to collapse
its not all the screen, just the bottom inch....
and i use it rotating it 180º, which had worked fine for over half a year now... i bought and replaced a screen once, but it only lasted 11 days...
anyway... if cos13.1.x has gapps, why does it stays in the boot logo forever? :/
xchikyx said:
its not all the screen, just the bottom inch....
and i use it rotating it 180º, which had worked fine for over half a year now... i bought and replaced a screen once, but it only lasted 11 days...
anyway... if cos13.1.x has gapps, why does it stays in the boot logo forever? :/
Click to expand...
Click to collapse
You mean it didn't booted? FYI,Gapps has nothing to do with rom booting,they are optional.
First boot can usually take 20-30 mins.
Mr.Ak said:
You mean it didn't booted? FYI,Gapps has nothing to do with rom booting,they are optional.
First boot can usually take 20-30 mins.
Click to expand...
Click to collapse
oh, so it takes longer than what i let it... i'lltry again
What QFIL software did you use? Similar thing happened to mine
Sent from my A0001 using Tapatalk
clevebb said:
What QFIL software did you use? Similar thing happened to mine
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
QFIL 1.0.0.2
It worked fine letting me enter fast boot...,
however i havent been able to make the phone work again... it doesnt pass the boot logo
I have oneplus one 64gb but when I was trying to reset my phone it went into brick state. now with the help of my friend I installed a new rom in it but now it is showing 16gb memory. please guide in this regard
Gakhar123 said:
I have oneplus one 64gb but when I was trying to reset my phone it went into brick state. now with the help of my friend I installed a new rom in it but now it is showing 16gb memory. please guide in this regard
Click to expand...
Click to collapse
pretty sure he installed the userdata_16g instead of userdata_64g
and i'm not even an expert hahaha
can you tell me which OS he installed and how? i really want to recover my phone
Hello guys. I need your help badly.
I am using Galaxy Grand Prime smg530h
The problem is when I push the power button, my phone automatically boots to recovery mode which is Twrp, yeah I was my only problem last time. I guess I wipe something using twrp, my phone says "NO OS INSTALLED" . Then I googled some ways to fix so I installed a custom rom using twrp. I though my problem was solved but still when I turn on my phone it automatically boots recovery. I googled again and did something. But a big problem shows up, When I turn on my phone, it boots automatically to twrp but after the samsung logo flashes, black screen appears. Its just blank but the my phone black light is on and I think im on twrp since everytime I touch the screen it vibrates.
Please help me
Htxenuj said:
Hello guys. I need your help badly.
I am using Galaxy Grand Prime smg530h
The problem is when I push the power button, my phone automatically boots to recovery mode which is Twrp, yeah I was my only problem last time. I guess I wipe something using twrp, my phone says "NO OS INSTALLED" . Then I googled some ways to fix so I installed a custom rom using twrp. I though my problem was solved but still when I turn on my phone it automatically boots recovery. I googled again and did something. But a big problem shows up, When I turn on my phone, it boots automatically to twrp but after the samsung logo flashes, black screen appears. Its just blank but the my phone black light is on and I think im on twrp since everytime I touch the screen it vibrates.
Please help me
Click to expand...
Click to collapse
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
RAZERZDAHACKER said:
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
Click to expand...
Click to collapse
Hmm. Can you show me a guide sir? On reinstalling? 'cos I dont know what to do since I am stuck on a blank screen.
Htxenuj said:
Hmm. Can you show me a guide sir? On reinstalling? 'cos I dont know what to do since I am stuck on a blank screen.
Click to expand...
Click to collapse
There is already a guide available for how to flash stock rom, which you can check out here. You can get the stock rom from sammobile, the official samsung firmware resource which you can check out here.
Good luck!
Edit: You can then try to reflash twrp and if it doesn't work, post about it in the twrp thread for your device.
RAZERZDAHACKER said:
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
Click to expand...
Click to collapse
Samsung doesn't use fastboot, they use download mode and flash with Odin. Be familiar with these kinds of specifics about a device if you're going to give advice, otherwise you might tell someone something very wrong unintentionally.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
Samsung doesn't use fastboot, they use download mode and flash with Odin. Be familiar with these kinds of specifics about a device if you're going to give advice, otherwise you might tell someone something very wrong unintentionally.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Adb: Recover > Update from ADB
Fastboot: Boot to download mode > fastboot access on most devices (confirmed on my S4)
RAZERZDAHACKER said:
Adb: Recover > Update from ADB
Fastboot: Boot to download mode > fastboot access on most devices (confirmed on my S4)
Click to expand...
Click to collapse
adb works on Samsung, fastboot does not.
Sent from my SM-S903VL using Tapatalk
RAZERZDAHACKER said:
Have you tried to re-install everything including your recovery? Perhaps even your bootloader or try to flash your ROM manually from fastboot or adb.
Click to expand...
Click to collapse
How can I boot to Download mode since I am stuck at blank screen?
Htxenuj said:
How can I boot to Download mode since I am stuck at blank screen?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=gYA3ZMlDO3Q
Htxenuj said:
Hello guys. I need your help badly.
I am using Galaxy Grand Prime smg530h
The problem is when I push the power button, my phone automatically boots to recovery mode which is Twrp, yeah I was my only problem last time. I guess I wipe something using twrp, my phone says "NO OS INSTALLED" . Then I googled some ways to fix so I installed a custom rom using twrp. I though my problem was solved but still when I turn on my phone it automatically boots recovery. I googled again and did something. But a big problem shows up, When I turn on my phone, it boots automatically to twrp but after the samsung logo flashes, black screen appears. Its just blank but the my phone black light is on and I think im on twrp since everytime I touch the screen it vibrates.
Please help me
Click to expand...
Click to collapse
i have 2 of this devices,they all go to same trouble,never show twrp. no change no picture just blank (seems grey into black)
Suryo75 said:
i have 2 of this devices,they all go to same trouble,never show twrp. no change no picture just blank (seems grey into black)
Click to expand...
Click to collapse
It fix by using cwm, twrp is not compatible with twrp especially g530h which is has xxu based
Suryo75 said:
It fix by using cwm, twrp is not compatible with twrp especially g530h which is has xxu based
Click to expand...
Click to collapse
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
dv8ted said:
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
Click to expand...
Click to collapse
Just visit link with quote cwm for g530h
dv8ted said:
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
Click to expand...
Click to collapse
CWM is a dead project, it is no longer supported, that is why you are only finding TWRP. If you want custom recovery, use TWRP, it is a much better recovery than CWM anyway.
Sent from my LGL84VL using Tapatalk
dv8ted said:
Can you help with a working link for CWM for 530H? I cant seem to find anything apart from TWRP
Click to expand...
Click to collapse
try this
Is their any solution to use twrp on g530h xxu based?
On flashing many custom roms through cwm, their is nothing on screen but gray broken lines.
Please help if anyone have it's solution.
Hi guys,
I was trying to root my phone(EMUI 4.0, Marsh mellow), first i unlocked bootloader, then installed twrp, everything was right till then, when i installed SU, and rebooted the phone got stuck at logo screen.
Then I installed another rom, which changed phone model to HI6210SFT, but wifi and bluetooth was not working.
So, I installed another rom, this time indian version, bluetooth, wifi, sim were working fine, but still Model remained HI6210SFT.
Then i got another rom, this time the pak version, after flashing that, the phone is now stuck at boot screen, nothing works.
I can go into Fastboot, TWRP, but not into UPDATE mode.
I tried flashing multiple roms, still phone is stuck.
Xaadi Xhahid said:
Hi guys,
I was trying to root my phone(EMUI 4.0, Marsh mellow), first i unlocked bootloader, then installed twrp, everything was right till then, when i installed SU, and rebooted the phone got stuck at logo screen.
Then I installed another rom, which changed phone model to HI6210SFT, but wifi and bluetooth was not working.
So, I installed another rom, this time indian version, bluetooth, wifi, sim were working fine, but still Model remained HI6210SFT.
Then i got another rom, this time the pak version, after flashing that, the phone is now stuck at boot screen, nothing works.
I can go into Fastboot, TWRP, but not into UPDATE mode.
I tried flashing multiple roms, still phone is stuck.
Click to expand...
Click to collapse
You nerd to flash stock ROM...
hassanjavaid8181 said:
You nerd to flash stock ROM...
Click to expand...
Click to collapse
How, can you explain please?I tried flashing at least 4 different roms, the only one booted the phone but the problem was the phone had no connectivity, i cannot go into UPDATE mode, so tried flashing via fastboot. but still no luck, its stuck on the first screen...
any help will be appreciated, thanks in advance
hassanjavaid8181 said:
You nerd to flash stock ROM...
Click to expand...
Click to collapse
all those 4 roms were stock.
Xaadi Xhahid said:
all those 4 roms were stock.
Click to expand...
Click to collapse
Flashed it via dload method?
hassanjavaid8181 said:
Flashed it via dload method?
Click to expand...
Click to collapse
no, via FASTBOOT method, System.img, recovery.img, boot.img
I tried the dload method, but the phone doesnt go into UPDATE mode, instead it goes to twrp on pressing Vol +, Vol - and power button
Xaadi Xhahid said:
no, via FASTBOOT method, System.img, recovery.img, boot.img
I tried the dload method, but the phone doesnt go into UPDATE mode, instead it goes to twrp on pressing Vol +, Vol - and power button
Click to expand...
Click to collapse
You will have to flash stock recovery then use dload method
Dload will not work on twrp..
hassanjavaid8181 said:
You will have to flash stock recovery then use dload method
Dload will not work on twrp..
Click to expand...
Click to collapse
It should work, dload method doesn't use normal recovery. I think it uses eRecovery.
Thanks, I will try your methods, and will update if i get lucky.
Xaadi Xhahid said:
Thanks, I will try your methods, and will update if i get lucky.
Click to expand...
Click to collapse
First of all install TWRP from Here
https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
Now Download the MM Rom From Here
http://www.carbontesla.com/2016/07/download-honor-4c-b530-marshmallow-update-india/
Now wipe all partitions from TWRP
and flash the MMRom.zip through twrp it will boot your device normally.
For more info go to this link
https://forum.xda-developers.com/honor-4c/how-to/installing-p8lite-roms-honor-4c-t3617942
try using adb
Xaadi Xhahid said:
Hi guys,
I was trying to root my phone(EMUI 4.0, Marsh mellow), first i unlocked bootloader, then installed twrp, everything was right till then, when i installed SU, and rebooted the phone got stuck at logo screen.
Then I installed another rom, which changed phone model to HI6210SFT, but wifi and bluetooth was not working.
So, I installed another rom, this time indian version, bluetooth, wifi, sim were working fine, but still Model remained HI6210SFT.
Then i got another rom, this time the pak version, after flashing that, the phone is now stuck at boot screen, nothing works.
I can go into Fastboot, TWRP, but not into UPDATE mode.
I tried flashing multiple roms, still phone is stuck.
Click to expand...
Click to collapse
you can use adb if your custom recovery is working, the do a sideload
brianjb_jbbrian said:
you can use adb if your custom recovery is working, the do a sideload
Click to expand...
Click to collapse
What about if the recovery is not working?
arczangel said:
What about if the recovery is not working?
Click to expand...
Click to collapse
You can flash stock recovery via adb fastboot..
arczangel said:
What about if the recovery is not working?
Click to expand...
Click to collapse
Extract ur exact stock rom using Huawei extractor and then flash the system.img and cust.img
recently got a hard brick oneplus one (A0001) from my friend.
After trying several times I finally installed the correct driver on win 10 pc and save it out of the hardbrick status using the Color OS method.
but now it won't boot into any os at all. It won't even boot into recovery. Everytime I boot it up, it just stays at the black screen with white 1+ logo there.
I have tried to install TWRP, or reflash cm11s, cm13 on the phone... none of them could get it out of the 1+ logo.
I can't get into recovery at all even after flash twrp successfully via fastboot.
Please let me know if there is other way to get out of the soft brick, no recovery, no os status.
Thank you.
Is the bootloader unlocked properly. If so and its still not working I would try a complete factory reset as there is an image on the forums for it. The if that works look at twrp after. I suggest the tuga version though.
Shinobi_warrior said:
Is the bootloader unlocked properly. If so and its still not working I would try a complete factory reset as there is an image on the forums for it. The if that works look at twrp after. I suggest the tuga version though.
Click to expand...
Click to collapse
Yes, both line on bootloader show "ture ".
I have flash several cm builds via fastboot but none of them works for me.
I also flash twrp but still can't boot into twrp either.
Would you mind point me to the TUGA version? I have been hanging around xda and oneplus forum last couple days but still no luck.
https://www.androidfilehost.com/?w=files&flid=50417
Should use the -5 version it could possibly be your computer have you tried a different one? Maybe its a driver related issue?
":TWRP_3.1.1-5-TugaPower.img"
laofan said:
recently got a hard brick oneplus one (A0001) from my friend.
After trying several times I finally installed the correct driver on win 10 pc and save it out of the hardbrick status using the Color OS method.
but now it won't boot into any os at all. It won't even boot into recovery. Everytime I boot it up, it just stays at the black screen with white 1+ logo there.
I have tried to install TWRP, or reflash cm11s, cm13 on the phone... none of them could get it out of the 1+ logo.
I can't get into recovery at all even after flash twrp successfully via fastboot.
Please let me know if there is other way to get out of the soft brick, no recovery, no os status.
Thank you.
Click to expand...
Click to collapse
The TWRP which you tried is latest official one,right?
Shinobi_warrior said:
https://www.androidfilehost.com/?w=files&flid=50417
Should use the -5 version it could possibly be your computer have you tried a different one? Maybe its a driver related issue?
":TWRP_3.1.1-5-TugaPower.img"
Click to expand...
Click to collapse
thanks, let me try this one.
Mr.Ak said:
The TWRP which you tried is latest official one,right?
Click to expand...
Click to collapse
I was using twrp 3.1.1.0 bacon.img. No luck.
laofan said:
I was using twrp 3.1.1.0 bacon.img. No luck.
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Did you try using this? Although,it is based on colour os restore tool,it flashes cm11s instead of colour os through usb-debugging port method(ofcourse,not fastboot).
Mr.Ak said:
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Did you try using this? Although,it is based on colour os restore tool,it flashes cm11s instead of colour os through usb-debugging port method(ofcourse,not fastboot).
Click to expand...
Click to collapse
I did that already.. No luck. Still on 1+ logo
laofan said:
I did that already.. No luck. Still on 1+ logo
Click to expand...
Click to collapse
I'm afraid it's hardware issue then.