120 hz with Power saving mode?? - Samsung Galaxy Note 20 Ultra Questions & Answers

I know the trick where you have to do it manually every time, but i dont like that because i use adaptive power saving mode. Back in one ui 2.5 if your on on 120 hz and adaptive power saving mode kicks in it would still run in 120 hz refresh rate. Now in one ui 3 they patched that. Can anyone make a magisk to bypass that? Or if you know a way for adaptive power saver work with adaptive motion smoothness pls let me know thank you

Related

Seriously annoying bug

With all power saving modes disabled brightness reduces when you open browser and several other apps. Unless brightness is very low or very high. Really annoying when you're outdoors and suddenly can't see anything
If you use power saving mode, it reduces brightness all the time but when you restart phone brightness is normal again
Only happened after enabling power save mode for first time so 100 percent a bug. Still present in latest Chinese developer Rom so not going to be fixed any time soon.
How can such an obvious bug exist in the first place let alone be around for over 6 months

Has anyone figure method(s) to Force 120Hz display yet ?

Has anyone figure method(s) to Force 120Hz display yet ? The dynamic refresh rate in both auto and 120Hz mode is now, the only thing on this phone bothers me so much.
EU rom (under display and brightness) has the option to choose : "Auto Select"; "120Hz" or "60Hz" in Screen Refresh Rate
BlueMeany68 said:
EU rom (under display and brightness) has the option to choose : "Auto Select"; "120Hz" or "60Hz" in Screen Refresh Rate
Click to expand...
Click to collapse
That's true, however, OP points out the fact that even at "120 Hz" setting the phone does some sort of battery saving stuff like optimizing the refresh rate based on applications used, battery level etc.
Which is not a bad thing, don't get me wrong - saving battery when the app (or user) don't benefit from 120 Hz setting is a pretty useful stuff. But then it should not be called "120 Hz" mode but rather "Light Adaptive mode" or something.
Btw Oneplus 8 Pro has even more aggressive approach to this, it literally switches to 60 Hz when you don't touch the screen, back to 120 Hz for two seconds when you touch the screen and then reverts to 60 Hz.
This is the reason why Oneplus 8 Pro is so good in all 120 Hz battery drain tests because, basically... it almost never runs it. This should not be called 120 Hz even though I fully appreciate the battery saving mechanism.
You can check here whether Oppo Find X2 Pro stays at 120 Hz (fps) or switches to 60 Hz right after you touch it like Oneplus: https://www.testufo.com
Killer007TV said:
That's true, however, OP points out the fact that even at "120 Hz" setting the phone does some sort of battery saving stuff like optimizing the refresh rate based on applications used, battery level etc.
Which is not a bad thing, don't get me wrong - saving battery when the app (or user) don't benefit from 120 Hz setting is a pretty useful stuff. But then it should not be called "120 Hz" mode but rather "Light Adaptive mode" or something.
Btw Oneplus 8 Pro has even more aggressive approach to this, it literally switches to 60 Hz when you don't touch the screen, back to 120 Hz for two seconds when you touch the screen and then reverts to 60 Hz.
This is the reason why Oneplus 8 Pro is so good in all 120 Hz battery drain tests because, basically... it almost never runs it. This should not be called 120 Hz even though I fully appreciate the battery saving mechanism.
You can check here whether Oppo Find X2 Pro stays at 120 Hz (fps) or switches to 60 Hz right after you touch it like Oneplus: https://www.testufo.com
Click to expand...
Click to collapse
Thanks for clarifying my point. In addition, OnePlus's high refresh rate displays can be forced to run at the constant value via ADB method but I have no clue for an OPPO's. I don't understand that why OPPO provides both 120Hz and auto refresh rate options but perform exactly the same.
MaKuRoZuMK2 said:
Thanks for clarifying my point. In addition, OnePlus's high refresh rate displays can be forced to run at the constant value via ADB method but I have no clue for an OPPO's. I don't understand that why OPPO provides both 120Hz and auto refresh rate options but perform exactly the same.
Click to expand...
Click to collapse
Sorry if I misunderstood. I've used the website suggested and my x2 pro remains at 118-120hz throughout ?
BlueMeany68 said:
Sorry if I misunderstood. I've used the website suggested and my x2 pro remains at 118-120hz throughout ?
Click to expand...
Click to collapse
Try it on browser like Microsoft Edge or Chrome Dev. Those browsers are limited at 60Hz while I can force run my OnePlus 8's at 90Hz all time via ADB.
MaKuRoZuMK2 said:
Has anyone figure method(s) to Force 120Hz display yet ? The dynamic refresh rate in both auto and 120Hz mode is now, the only thing on this phone bothers me so much.
Click to expand...
Click to collapse
I try something via adb
adb shell settings list secure
And I found this
coloros_screen_refresh_rate=3
3 = 120hz
2=60hz
0=Auto
But I cant put any number because android.permission.WRITE_SECURE_SETTINGS not granted
Maybe, just maybe, if you can put it to another number ( like 1 or 4 ), you can force 120hz on Oppo Find X2/X2Pro
BIBUBO BCJ said:
I try something via adb
adb shell settings list secure
And I found this
coloros_screen_refresh_rate=3
3 = 120hz
2=60hz
0=Auto
But I cant put any number because android.permission.WRITE_SECURE_SETTINGS not granted
Maybe, just maybe, if you can put it to another number ( like 1 or 4 ), you can force 120hz on Oppo Find X2/X2Pro
Click to expand...
Click to collapse
Tried this, was able to put both 1 and 4 and unfortunately, it's not forced at 120Hz. Now it's the dead end haha.
MaKuRoZuMK2 said:
Tried this, was able to put both 1 and 4 and unfortunately, it's not forced at 120Hz. Now it's the dead end haha.
Click to expand...
Click to collapse
ps. 1 is fake 90Hz mode and I have no idea with 4 and beyond.
ps.2 you have to disable permission monitoring in dev options first in order to set those settings.
MaKuRoZuMK2 said:
ps. 1 is fake 90Hz mode and I have no idea with 4 and beyond.
ps.2 you have to disable permission monitoring in dev options first in order to set those settings.
Click to expand...
Click to collapse
Oh I really forgot that option :cyclops:
BTW, There's some command like auto_switch and frozen_time, while Find X2/X2 Pro are using an adaptive 120hz, so any ideas ?
BIBUBO BCJ said:
Oh I really forgot that option :cyclops:
BTW, There's some command like auto_switch and frozen_time, while Find X2/X2 Pro are using an adaptive 120hz, so any ideas ?
Click to expand...
Click to collapse
Will try that as soon as I can
Sad that a 120hz phone only runs 120hz in a few apps, my Moto edge is 90hz in almost every app as I can see, Razer phone was 120hz in every app or you could force an app to run 120hz if it wasn't already, sad
If you want 120Hz in more apps you have to enable O1 Ultra Vision on 120Hz. 1080p only though.
That will make apps like IG smoother and YT in 120Hz.
Jordytjes said:
If you want 120Hz in more apps you have to enable O1 Ultra Vision on 120Hz. 1080p only though.
That will make apps like IG smoother and YT in 120Hz.
Click to expand...
Click to collapse
And I have to sacrifice that 2K resolution on my display
Working around for those options
BIBUBO BCJ said:
Oh I really forgot that option :cyclops:
BTW, There's some command like auto_switch and frozen_time, while Find X2/X2 Pro are using an adaptive 120hz, so any ideas ?
Click to expand...
Click to collapse
Update, I tried to config those two commands with no success
hope to run 120hz every app
Most apps are not optimized for running at 120hz yet, it's down to individual apps, when you set it to auto only the user interface and oppos apps run at 120 but all other apps run at 60, basically some apps do some apps don't , not oppos fault
---------- Post added at 12:34 AM ---------- Previous post was at 12:33 AM ----------
Jordytjes said:
If you want 120Hz in more apps you have to enable O1 Ultra Vision on 120Hz. 1080p only though.
That will make apps like IG smoother and YT in 120Hz.
Click to expand...
Click to collapse
The ultra vision only adds frames on to the video that your playing that's all, doesn't smooth out the actual app
kevinireland11 said:
Most apps are not optimized for running at 120hz yet, it's down to individual apps, when you set it to auto only the user interface and oppos apps run at 120 but all other apps run at 60, basically some apps do some apps don't , not oppos fault
---------- Post added at 12:34 AM ---------- Previous post was at 12:33 AM ----------
The ultra vision only adds frames on to the video that your playing that's all, doesn't smooth out the actual app
Click to expand...
Click to collapse
That is not true. YT is normally only 60Hz to save battery for example. With O1 it has to be on 120Hz as the actual video is also interpolated to 120Hz. Try it out for your self.
We mean 120hz scrolling/animations within an app, not video playback
For_itembine said:
We mean 120hz scrolling/animations within an app, not video playback
Click to expand...
Click to collapse
+1

Auto refresh rate manual over-ride?

Hi all,
I was just wondering if there is a way to force certain apps to run at 120 Hz when my phone is set to the ‘Auto Select’ refresh rate. I have had this on since i bought the phone but the Microsoft Launcher will only run at 60fps unless i force the phone to remain at 120 Hz universally, something i don’t wish to have enabled for battery reasons.
Many thanks!
I got this problem too , 120Hz is not real

Shift 60hz / 120hz

Hello, does anyone know if there is any way to create a shortcut to change the screen from 60 hz to 120 hz without having to go into settings.
Does anyone know anything?
Thanks
Tasker and/or Bixby routine

Question 12s ultra LTPO problem (refresh rate) in EU ROM

I think the LTPO2 is not working properly on eu rom currently im on last update 13.0.11 and i can see that the refresh rate is not going to 1fps in main menu or in settings, the frames going only low to 90fps in Facebook and i think this draining a lot of battery. Could you check on your phones how it is, go in developer settings and enable "show refresh rate" to see do you have this problem as well and if there is any solution for that, thanks
mititko123 said:
I think the LTPO2 is not working properly on eu rom currently im on last update 13.0.11 and i can see that the refresh rate is not going to 1fps in main menu or in settings, the frames going only low to 90fps in Facebook and i think this draining a lot of battery. Could you check on your phones how it is, go in developer settings and enable "show refresh rate" to see do you have this problem as well and if there is any solution for that, thanks
Click to expand...
Click to collapse
Adjust brightness.
Screen in FHD+ 60Hz
Minimum brightness: stay at 60
Brightness in the middle: goes to 30
Maximum brightness: goes to 10
With any other settings, the minimum reached is 10.
Surely a particular scenario is needed to reach 1.
You were going to 1 with the stock rom?
https://xiaomi.eu/community/threads...-rate-not-working-correctly.61079/post-650620
NOSS8 said:
Adjust brightness.
Screen in FHD+ 60Hz
Minimum brightness: stay at 60
Brightness in the middle: goes to 30
Maximum brightness: goes to 10
With any other settings, the minimum reached is 10.
Surely a particular scenario is needed to reach 1.
You were going to 1 with the stock rom?
https://xiaomi.eu/community/threads...-rate-not-working-correctly.61079/post-650620
Click to expand...
Click to collapse
Thank you for information, i have never used the phone with stock CH ROM, but now i have realised the brightest is the main thing as well, thanks and it works alright

Categories

Resources