I got a micromax dead mobile phone . I want to flash it but I don't know its modle number
Anybody please help me
If anybody know ho to see the model number fom recovery mode
" PLS HELP ME "
" PLS "
mehulclid said:
I got a micromax dead mobile phone . I want to flash it but I don't know its modle number
Anybody please help me
If anybody know ho to see the model number fom recovery mode
" PLS HELP ME "
" PLS "
Click to expand...
Click to collapse
bro, if battery is removable it should be on the back or you may try to connect phone with recovery mode on and use adb command
adb pull /system/build.prop (location where to save file on pc)
after that open build.prop to see the model no and name.
Related
So my phone got bricked ! It had the fastboot error , after i did the recovery crap on cmd it only showed lg startup logo , but i was able to go to emergency mode ! Now my phone wont turn on at all . I followed these instructions : http://forum.xda-developers.com/showthread.php?t=875881
Please explain me , is there a way to fix this ?! Will i be able to exchange for a new phone if i still have the guarantee for my phone ? What should i do i am pretty desperate i don't want my mom to kill me lol .
PacManOG said:
So my phone got bricked ! It had the fastboot error , after i did the recovery crap on cmd it only showed lg startup logo , but i was able to go to emergency mode ! Now my phone wont turn on at all . I followed these instructions : http://forum.xda-developers.com/showthread.php?t=875881
Please explain me , is there a way to fix this ?! Will i be able to exchange for a new phone if i still have the guarantee for my phone ? What should i do i am pretty desperate i don't want my mom to kill me lol .
Click to expand...
Click to collapse
P.S
I mean doesnt turn ON !
When you KDZ... ALWAYS " DISABLE " LG USB MODEM in Device Manager.
See if your phone enters emergency mode. Search this forum.
If its under warranty.. they might replace it for free but dont tell them you rooted your phone or anything!!
rr0yy said:
When you KDZ... ALWAYS " DISABLE " LG USB MODEM in Device Manager.
See if your phone enters emergency mode. Search this forum.
If its under warranty.. they might replace it for free but dont tell them you rooted your phone or anything!!
Click to expand...
Click to collapse
I did disable LG USB Modem . I know what is emergency mode i mean i cant do ANYTHING , its like put it to a pc or a charger take battery out try the same put the batery in the same , nothing . It simply doesnt want to turn on
Edit :
Ok so i found out .
Bricked means dead = i have to get a new phone , had the phone for only 2-3 months , so i have the guarantee , hope they will exchange it for a new one or let them fix it by replacing the circuit board or something
Here
If its not entering Emergency.. there is no other way to recover. Go to Service Centre!!
I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone
mickeybatio said:
I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone
Click to expand...
Click to collapse
Those Guys out there in MMX service centre are nut xD.Okay you got your imei wiped .Its actually due to change of ur mother board.not an problem.its easy to implant it again.find ur both imei number in the packaging box .note it down in a piece of paper.now go to engineer mod and select GPRS .Choose the first sim and enter the first imei there .click write imei ---> ok , click attached--->ok ,click detached---> okay
Now repeat this for the second sim and enter the second imei.reboot the phone. Now check ur imei You can now reset your phone even for 1000 times but you have to implant it again and again every time u flash a new rom or reset
engineer mode
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me
chaitu.swaroop said:
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me
Click to expand...
Click to collapse
first select usb debuging option in developer optiion
then in eng mod go to radio wave option and put imi no
hi brother. thanks a lot for ur reply. i've tried what u said. but i'm unable to find that radio wave option. could u pls give the exact path so that it will be helpfull to me.
pls save my phone.
even though i put my phone in debugging enabled mode my pc is showing like pls put debugging mode on. this is another problem i am having right now. to root my phone i need this debugging mode enabled in pc. i've tried framaroot, z4root, z4 zte blade root, terminal emulator all the methods without pc i've tried to root my phone, but no use.
pls help me in this issue.
thanks a lot in advance :good:
hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Download the imei writing tool for m a110 http://support.moulnisky.com/index.php?dir=Micromax/00_A Serie/A110/Tools/
What if i do not know the IMEI nos?
very easy, back on ur phone inside d battery place
kamalahasang said:
What if i do not know the IMEI nos?
Click to expand...
Click to collapse
hi fnd u can know ur imei very easily. it is just back of ur phone. remove d battery & u can have ur both imei no.s there.:laugh::laugh:
hit thanks bcoz u know to hit as i helped u.
no luck at send failed heeeeeeeeelp please
chaitu.swaroop said:
hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
fix it plzz
xdag700 said:
fix it plzz
Click to expand...
Click to collapse
IMEI is quite easy to fix ! Use MTK Droid tools to write ur imei or S/N Write tool. There are many tutorials browse through for how to use this tool !
Flashing stock ROM through SP should solve imei. First select format in sp and then flash ROM through sp. Then after first boot take imei backup as mentioned in this thread. And replace it every time u face problem !
http://forum.xda-developers.com/mic...artition-a110q-canvas-2-t2568182/post48447661
( See only IMEI related in this thread. Leave others )
Reset IMEI of A110
Hey! I have got the same problem in my Canvas HD. What I do is:-
1. goto dialer and type *#*#3646633#*#*
2. Goto CDS information
3. Goto Radio
4. On the command bar, type AT+ EGMR, 1,7"YOUR IMEI"
5. And send command
If it says command sent, then good but if not, remove SIM and try again .
6. Reboot
Note: For SIM 1, the command is AT+ EGMR, 1,7"YOUR IMEI" but for SIM 2 it is, AT+ EGMR, 1,10"YOUR IMEI"
I hope you got the answer! :fingers-crossed: :fingers-crossed:
my frnd was gettin this error so i told him this method
everything went well but after reboot his device showing the same error again plz help
guys I need yo serios help..I rooted my fon micromax a88 sday usin root master..by tday whil I changd th font n rebooted th fon,it gt stuk at canvas..its nt movin aftr dt..guys I tries to go to recvry mod..bt its js givin a blank screen n nt goin ahed..is my fon brikd? guys pl help me n rep me ASAP..I need yo help.
Dave18392 said:
guys I need yo serios help..I rooted my fon micromax a88 sday usin root master..by tday whil I changd th font n rebooted th fon,it gt stuk at canvas..its nt movin aftr dt..guys I tries to go to recvry mod..bt its js givin a blank screen n nt goin ahed..is my fon brikd? guys pl help me n rep me ASAP..I need yo help.
Click to expand...
Click to collapse
I'll help, but I really can't understand a word you've written...
TagEHeuer said:
I'll help, but I really can't understand a word you've written...
Click to expand...
Click to collapse
c mate...i rooted my fon day before sday using a software called rootmaster...my fon model is micromax canvas a88...it is an indian brand...
so yesterday i tried to change th font of my fon usin rom toolbox...and after changin the font,they(software ppl) asked me to reboot the fon in ordr to make the changes in affect....wen i rebooted the fon,its nt moving after th canvas screen...so i went to the recovery mod but unfortunately its nt wrkin as its showin blank screen..so wat to do...its Mediatek device..MTK6577..
Dave18392 said:
c mate...i rooted my fon day before sday using a software called rootmaster...my fon model is micromax canvas a88...it is an indian brand...
so yesterday i tried to change th font of my fon usin rom toolbox...and after changin the font,they(software ppl) asked me to reboot the fon in ordr to make the changes in affect....wen i rebooted the fon,its nt moving after th canvas screen...so i went to the recovery mod but unfortunately its nt wrkin as its showin blank screen..so wat to do...its Mediatek device..MTK6577..
Click to expand...
Click to collapse
restore the phones system backup
jime1 said:
restore the phones system backup
Click to expand...
Click to collapse
hw to do it wn my fon s bootlokd n nt swichin on?
TagEHeuer said:
I'll help, but I really can't understand a word you've written...
Click to expand...
Click to collapse
pl help me mate..
anyway for me to get th stock rom for micromax a88
Dave18392 said:
hw to do it wn my fon s bootlokd n nt swichin on?
Click to expand...
Click to collapse
boot into recovery by pressing VOL UP + VOL DOWN + POWER to get into recovery mode
Dave18392 said:
pl help me mate..
anyway for me to get th stock rom for micromax a88
Click to expand...
Click to collapse
Check this link....
http://skyneel.blogspot.com/2013/06/Stock-Rom-V1-for-Micromax-A88-Canvas-Music.html
guys need a next help from u all...i did evrything as you told and now my phone isnt showing range and is sayin hat the IMEI is invalid...wat to do ??
And thanks for the previous helps..
Due to no range i cant niether cal nor reciev calls..so help me pleas.
Dave18392 said:
guys need a next help from u all...i did evrything as you told and now my phone isnt showing range and is sayin hat the IMEI is invalid...wat to do ??
And thanks for the previous helps..
Due to no range i cant niether cal nor reciev calls..so help me pleas.
Click to expand...
Click to collapse
Have You flashed stock rom?
Sent from my Explorer A310e using xda app-developers app
yes dude,...instaled it.
I flashed the stock rom and its getting switched on now...but it shows invalid IMEI and no range is coming..i gues i dont ve th back up also..
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Will this method work for micromax a88 for validating the IMEI after flashing th stock rom?
Dave18392 said:
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Will this method work for micromax a88 for validating the IMEI after flashing th stock rom?
Click to expand...
Click to collapse
First of all .. use Quote ("REPLY) button to specify with whom you are having this conversation!
now ..where did you get the above list of 13? give me the link..
Solution: its a similar link and it should work!
http://skyneel.blogspot.com/2013/08...-IMEI-no-in-Micromax-and-other-MTK-phone.html
jime1 said:
First of all .. use Quote ("REPLY) button to specify with whom you are having this conversation!
now ..where did you get the above list of 13? give me the link..
Solution: its a similar link and it should work!
http://skyneel.blogspot.com/2013/08...-IMEI-no-in-Micromax-and-other-MTK-phone.html
Click to expand...
Click to collapse
I asked that question in general and i ve done it..evrythin is working fine now...thought a of u can help me out.thats y asked
If the problem/issue is solved.. Then rename your (this) thread /post as SOLVED.. So that from Now on it can help others.
Also give a suitable title to this issue related thread rather than just [Q]..:beer:
Sent from my Explorer A310e using xda app-developers app
Please anyone help me .. my lenovo cant detect bot of simcard coz Imei invalid ..
I try all way i can find in google but still fail ..
from mobile uncle . Mtkdroid . simulator and etc ..
anyone please help me i m sad with this condition :crying:
andermeida said:
Please anyone help me .. my lenovo cant detect bot of simcard coz Imei invalid ..
I try all way i can find in google but still fail ..
from mobile uncle . Mtkdroid . simulator and etc ..
anyone please help me i m sad with this condition :crying:
Click to expand...
Click to collapse
Check your baseband.What it written?
please help me to fix my phone . i can't open the bootloader of my SM-J500H/DS .how can i fix this? when i turn it on, there are colored yellow words written at the upper right, ( set warranty bit : recovery ) , after that, after how many it turns of back .. what will i do please help me . THANK YOU
Bro u need to flash your phone.. Dl a stock rom for ur phone and flash it using odin..