Question realme c2 fastboot problem - Realme C2

hey so i have a realme c2 phone when i boot it to recovery adb doesn`t detect it and i have try reinstall the driver but nothing happend someone could fix it for me pls

ADB doesn't work in recovery mode. Use Fastboot.

Related

help i think i bricked device

I was trying to install cwm recovery with flashify. after i installed it i formated some wrong directories (?) so after reboot it is stuck at nvidia logo and i cant boot to recovery. i was trying to boot it with adb but no use because pc doesnt see shield and i wasnt able to install drivers . sorry for bad english any help is appreciated .
Try installing universal naked driver and minimal adb fastboot and flash factoryimage with fastboot.

Phone Stuck in Bootloop

Hello,
Recently I flashed a CWM file for 'Lava Iris X1' found on this site for my android 'Lava Iris X1 Grand'. Now my phone is stuck in a bootloop. For some reason i cant enter recovery mode even before my phone was stuck in a bootloop. I am not sure whether my phone has USB debugging enabled or not. I rooted my android with KingRoot before all this happened. I have downloaded your Minimal Adb and Fastboot but it cant find my device.
Overall problem:
1) Phone Stuck in Bootloop
2)USB debugging enabled ? Not sure
3) Can't enter recovery mode
4) ADB wont find my device
Note : When I used Minimal Adb and Fastboot, I typed 'fastboot devices' and some numbers appear:
0123456789ABCDEF devices
but when I used the command 'adb devices' my device is not shown:
List of devices attached
I have a backup at my phone through the Flashify app but since recovery mode cant show I cant recover it. I also need a some flash recovery images.
Please help me out here. I don't know what else to do.
Thank You in advance
Fixed
Nevermind guys, i was able to get my phone out of bootloop using SP Flash Tool.
Now all I have to do is restore IMEI.
Marticco said:
Nevermind guys, i was able to get my phone out of bootloop using SP Flash Tool.
Now all I have to do is restore IMEI.
Click to expand...
Click to collapse
Can you please tell me how did you do that.. i am also in the same situation.

Stuck at boot after fastboot flash !

Hello Guys
My device is Gm1910 variant
I flashed 9.5.11 Gm21AA via fastboot normally with flash.bat command
No errors occured , everything is ok
Then i got stuck at boot
After 20 minutes i reset the phone via stock recovery to ensure a clean startup , still same result
I flashed 9.5.3 Gm21AA via fastboot
Still same result
Bootloader is unlocked
What should i do ?
How can i boot it up
Please help me , i feel helpless !
extract images.zip and Othersflashall.zip to the directory. Then run Flash-all-partitions-fastboot
PerthBoi92 said:
extract images.zip and Othersflashall.zip to the directory. Then run Flash-all-partitions-fastboot
Click to expand...
Click to collapse
Am i picking the right rom for this !
Which rom is the safest to flash for my model ?
Yes I have the Chinese model aswell. Its the correct one
I have another problem , my windows fall apart so i installed it again
And now i dont have drivers
Since I cant boot to enable usb debugging
Which drivers should i install to recognize a fastboot device ?
You don't need to boot the phone.. Hold VOL UP and DOWN and POWER at the same time. It will boot into Fastboot. Windows should automatically detect the phone.
PerthBoi92 said:
You don't need to boot the phone.. Hold VOL UP and DOWN and POWER at the same time. It will boot into Fastboot. Windows should automatically detect the phone.
Click to expand...
Click to collapse
True , but after i installed one plus drivers and open adb\fastboot cmd ,
entering fastboot devices shows blank
how can i get it to recognize the device on fastboot ?
i got it recognized in fastboot mode , now i will commence your solution with 9.5.11
Flash-all-partitions-fastboot completed with success ,, the device didnt reboot automatically so i powered the device off from the bootloader and booted manually ,,
Still Stuck at Boot !
what should i do , please help !

Taken Down

Taken Down
i tried to install various twrp (c1, 2 pro, etc) in my realme 2 but when ever i go to recovery it shows stock recovery
i also tried > fastboot boot rfecovery.img
but it stucks on realme boot logo
but again after starting my phone when i tries to boot recovery it shows stock recovery again and again
plz help me to install and run twrp in my realme 2
brother did you get your solution? same peoblem here
sachin282 said:
i tried to install various twrp (c1, 2 pro, etc) in my realme 2 but when ever i go to recovery it shows stock recovery
i also tried > fastboot boot rfecovery.img
but it stucks on realme boot logo
but again after starting my phone when i tries to boot recovery it shows stock recovery again and again
plz help me to install and run twrp in my realme 2
Click to expand...
Click to collapse
yo please share solutuion if you found i t
ikiwev said:
brother did you get your solution? same peoblem here
yo please share solutuion if you found i t
Click to expand...
Click to collapse
Did any of you have the solution? Cause I faced the same problem....
sachin282 said:
i tried to install various twrp (c1, 2 pro, etc) in my realme 2 but when ever i go to recovery it shows stock recovery
i also tried > fastboot boot rfecovery.img
but it stucks on realme boot logo
but again after starting my phone when i tries to boot recovery it shows stock recovery again and again
plz help me to install and run twrp in my realme 2
Click to expand...
Click to collapse
Download vbmeta.zip for ur phone and install it with this command (fastboot)
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
And then try unofficial twrp for realme 2

nubia x fastboot loop

hi community
i hope someone is still active in this nubia x section, because i hope for some help.
i flashed twrp to my nubia x with using Minimal ADB and Fastboot.
with twrp i flashed the new rom 3.21.
as i tried also to flash gaps i got in the "your device is corrupt. it can't be trusted and will not boot g.com/abh" error.
but because i still was able to flash files with Minimal ADB and Fastboot i flashed all the *.img files i found in the NX616J-update.zip to the phone.
so i was able to boot the recovery mode and flashed the original rom 3.21 with otg from usb stick.
then the nubia x booted normal to the original rom, but because the playstore wasn't working, i flashed again twrp with Minimal ADB and Fastboot.
in twrp i used all swipe and format functions because i thinked i want clean what i can to start from the beginning.
sorry i dont remeber exactly all the steps i did.
and now my problem is the phone only boot to the fastboot menu.
Minimal ADB and Fastboot seems to still work normal, i can unlock the device and flash twrp.
but after reboot i am still in the fastboot menu.
only boot do edload don't boot to fastboot, and if i boot edload i can connect the phone to my pc and with the qfil-tool i see connect:
"Qualcomm HS-USB QDLoader 9008 (COM4)
But to use qfil to flash i think i need a "MetaBuild Configuration (contents.xml)", and i can't find this file for nubia x.
i hope someone has an idea how i get my phone out of this fastboot-loop and share it here.
thanks and kind regards
hoitschau
i found the solution, thanks to rcsj.
https://forum.xda-developers.com/nubia-x/help/install-rom-stock-3-18-gapps-support-t4108715
flashing the file vbmetaDISABLED.img from the google drive with fastboot was my rescue.

Categories

Resources