help i think i bricked device - Shield Tablet Q&A, Help & Troubleshooting

I was trying to install cwm recovery with flashify. after i installed it i formated some wrong directories (?) so after reboot it is stuck at nvidia logo and i cant boot to recovery. i was trying to boot it with adb but no use because pc doesnt see shield and i wasnt able to install drivers . sorry for bad english any help is appreciated .

Try installing universal naked driver and minimal adb fastboot and flash factoryimage with fastboot.

Related

Brick?!?

Hello, I think my NS is bricked...
I was in recovery, I Unmounted /SDcard, I remounted /sdcard. I went to reboot system, but that's not what happened. Instead I'm in fastboot.
At the top, it says In red caps: FASTBOOT MODE - NO BOOT OR RECOVERY IMG.
My volume buttons and power button aren't working. I cant do anything. I'm not good with ADB, but is there a solution there? I can't get into my phone at all, I can only stay in fastboot. Can anyone help?
Your phone does not have a boot , therefore cannot start a ROM, and it does not have a recovery. It says that it is in fastboot, therefore it can listen to your pc and download a recovery from it.
You probably used fastboot to unlock your boot loader.
You therefore have to find a thread with instruction to unlock the boot loader. It will give you instruction and files for downloading a recovery image to your phone.
Good luck
Lionhe
Inviato dal mio Nexus S
I dunno about that, I'll try it, but when plugged in whilst in fastboot, my computer doesnt recognize anything.
you need to install the drivers on your PC, then suggest you install CWM, root, flash a rom of your choice.
This is a good place to start
http://nexusshacks.com/nexus-s-root/how-to-root-nexus-s-or-nexus-s-4g-on-ics-or-gingerbread/
I have the drivers installed properly, I rooted my phone a few months back..
nope, if your phone is not recognised you need to reinstall the drivers, happens all the time...just try it
Try this... Just "play along" until you get to the "unlock bootloader" option.
Once you get all that done, it should install CWM and everything for you. I have not tried it in your exact scenario; however, I have used variations of this tool for ages.
http://forum.xda-developers.com/showthread.php?t=1845663
Bricked ?
if your stuck in fast boot mode , just flash original image from here :- https://dl.google.com/dl/android/aosp/soju-jro03e-factory-c9f5a67d.tgz , using fastboot flash commands , pm me if you need a hand , ok
Start with this get ADB working right.
http://wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK
Then this guide to flash CWM
http://www.intomobile.com/2012/01/30/install-clockworkmod-touch-recovery-galaxy-nexus-and-nexus-s/
After getting CWM to work, press volume up +power to go to Fastboot then choose recovery to enter CWM
if all works well you can flash any ROM you want
Good luck

I'm so bricked. please help!!!!!!!!!!!

I updated to the newest version from asus site Version WW_V10.6.1.8 and then by mistake flashed the latest version of TWRP recovery. now the tablet is bricked. I cant access fast mode, no adb. it only boots into recovery each time but I cant restore anything and cant access external sd card. please help!!!
tainka said:
I updated to the newest version from asus site Version WW_V10.6.1.8 and then by mistake flashed the latest version of TWRP recovery. now the tablet is bricked. I cant access fast mode, no adb. it only boots into recovery each time but I cant restore anything and cant access external sd card. please help!!!
Click to expand...
Click to collapse
If the tablet is new and you still have the receipt my best advice is to try and take to the store and they will exchange it for you. other than that your only choice is to try and see if updating the drivers from Asus or even using another PC let's you gain access to Fastboot. Other than that the incompatible version of TWRP that you flashed most likely bricked your device.
Erik
When tablet will be in twrp, in connect tablet to PC and command "adb reboot bootloader". Now flash asus 4.2.1 via fastboot
Hazard17 said:
When tablet will be in twrp, in connect tablet to PC and command "adb reboot bootloader". Now flash asus 4.2.1 via fastboot
Click to expand...
Click to collapse
ok, this worked! I have fastboot but adb shell does not work. The weirdest thing is when I press the green android icon in boot loader screetn the system boots normally!!!! but!!! when i do restart it always boots into the twrp screen. the only way to boot the system is with your command. I tried to flash the patched recovery which works with the new firmware (the flash is ok) but i cant pass the recovery screen. How can I get rid of this recovery????

No fastboot detection,No recovery mode,Bootloop,(Micromax62)

I am not sure whether my mobile is Bricked or it has nothing installed in it.It is in boot loop and there is showing a triangle wit exclamatory mark in it,I think it has no recovery installed.
Mobile:-Micromax A62
I tried following idea.
1.Tried using fastboot but fastboot don't detect my phone(drivers are installed).
2.Using DownloadManager,It does not proceed after "Checking Baudrate".
3.Sp tool also don't detect it .
Please Please answer my question .
mayur42 said:
I am not sure whether my mobile is Bricked or it has nothing installed in it.It is in boot loop and there is showing a triangle wit exclamatory mark in it,I think it has no recovery installed.
Mobile:-Micromax A62
I tried following idea.
1.Tried using fastboot but fastboot don't detect my phone(drivers are installed).
2.Using DownloadManager,It does not proceed after "Checking Baudrate".
3.Sp tool also don't detect it .
Please Please answer my question .
Click to expand...
Click to collapse
you can download driver manually from this link: https://www.hard-reset.in/micromax-a62-hard-reset.html
I have drivers
There is no problem with drivers .Even though I installed drivers my phone is not detecting in fastboot devices,So i am unable to flash any recovery from fastboot or sp tool .

Crashed my phone

Hi guys i need help with my oneplus one...
yesterday i tryed to flash it with twrp but it gave me a error, then i wiped all(incl. system =S) now i flashed with fastboot the original recovery!
but how i can get cyanogenmod flashable zip on my device?? i cant mount the sdcart to put it on the device...
I tried wit "adb push rom.zip /sdcard/rom.zip", installed drivers ect. but it doesnt detects the device...
how can i go ahead now?? i have to activate usb debugging??? but how, if i cant get into the (not existing) system!
thanks!
There should be several posts/threads here which should tell you how to unbrick it, no?
Fabse91 said:
Hi guys i need help with my oneplus one...
yesterday i tryed to flash it with twrp but it gave me a error, then i wiped all(incl. system =S) now i flashed with fastboot the original recovery!
but how i can get cyanogenmod flashable zip on my device?? i cant mount the sdcart to put it on the device...
I tried wit "adb push rom.zip /sdcard/rom.zip", installed drivers ect. but it doesnt detects the device...
how can i go ahead now?? i have to activate usb debugging??? but how, if i cant get into the (not existing) system!
thanks!
Click to expand...
Click to collapse
Forget about trying to use recovery to flash. Download the fastboot images and flash with fastboot. See section 8a of my guide:
http://forum.xda-developers.com/showthread.php?t=2839471

nubia x fastboot loop

hi community
i hope someone is still active in this nubia x section, because i hope for some help.
i flashed twrp to my nubia x with using Minimal ADB and Fastboot.
with twrp i flashed the new rom 3.21.
as i tried also to flash gaps i got in the "your device is corrupt. it can't be trusted and will not boot g.com/abh" error.
but because i still was able to flash files with Minimal ADB and Fastboot i flashed all the *.img files i found in the NX616J-update.zip to the phone.
so i was able to boot the recovery mode and flashed the original rom 3.21 with otg from usb stick.
then the nubia x booted normal to the original rom, but because the playstore wasn't working, i flashed again twrp with Minimal ADB and Fastboot.
in twrp i used all swipe and format functions because i thinked i want clean what i can to start from the beginning.
sorry i dont remeber exactly all the steps i did.
and now my problem is the phone only boot to the fastboot menu.
Minimal ADB and Fastboot seems to still work normal, i can unlock the device and flash twrp.
but after reboot i am still in the fastboot menu.
only boot do edload don't boot to fastboot, and if i boot edload i can connect the phone to my pc and with the qfil-tool i see connect:
"Qualcomm HS-USB QDLoader 9008 (COM4)
But to use qfil to flash i think i need a "MetaBuild Configuration (contents.xml)", and i can't find this file for nubia x.
i hope someone has an idea how i get my phone out of this fastboot-loop and share it here.
thanks and kind regards
hoitschau
i found the solution, thanks to rcsj.
https://forum.xda-developers.com/nubia-x/help/install-rom-stock-3-18-gapps-support-t4108715
flashing the file vbmetaDISABLED.img from the google drive with fastboot was my rescue.

Categories

Resources