does anybody have knowledge of what rom i should use. for my moto e5play (sku number xt1921-1) (build number opps27-91-121-19) i have tried a few but dont understand the what im doing wrong or what rom i should use. pretty sure if someone could just tell me what rom i need to get even stock firmwear id really appreciate it thought it would be as easy as a ps4... i was sooo wrong. thakns for taking the time of your day to help/read this.
p.s. yesterday i was in a boot loop and fixed the issue then had bad key.. kixed that and now i have no wifi, flashlight, Bluetooth ect.
Related
I've searched the forums relentlessly with no luck. I rooted, installed some roms, tried to install Cyanogens latest rom, became stuck on the bootup screen for 30 minutes. Tried to wipe and reinstall and I get the same thing. Well now the boot screen comes up and the phone powers down automatically after about 5 seconds. I cant get to bootloader either. I'm worried it's really done now. Sorry in advance for being a dumb noob but if anyone could help i'd really appreciate it. Btw, I have a mytouch 3g.
Ok. I got to the bootloader and reinstalled the last working (hero) rom I had. It appears to be loading now. I still would like to change this rom as I really need bluetooth support but after that scare, I'm not sure what I did wrong. I was under the impression Cyanogen's ROMs were fairly simple to load. Sorry if this is not thread worthy but I've had this phone less than a week and if I brick it, my wife will kill me!
Hello guys. I just had an unexpected problem. i finally managed to install custom firmware (miui to be exact) and i have A BIG PROBLEM!!!
When i press the power button, in order to lock in, my phone just shuts down!
I tried installing different versions of miui, I even installed CM to to test.. but problem still apears. This means i cant use any custom firmwares, except standart one.
I saw many comments, that people saying it works and etc. but mine lock in button just shuts down the whole phone.
Huawei u8800pro
Android Version: 2.2.2
Kernel Version: 2.6.32.9-perf
Build number: 203026
Please, i beg you, help someone! Give atleast a tip or smth, I would appreciate any help.
I was helping him with this, since i have more expierience with flashing and rooting phones (Hey DHD and Xperia X1), and i can add that the phone was stock bought, and CWM was installed. It was not upgraded to 2.3.5 (Why would you need to do that, if you later wipe it via CWM. Or maybe that update contained some baseband update we needed?), it was just CWM installation, and then zip flashing via the menus. 2x MIUI ROM's were tryed, one CM7 ROM. All three of which were causing shutdowns when you lock the phone. I had the same problem with my DHD some time ago when running MIUI, but then it was just kernel related, so we tryed the CM7 ROM, but it was hanging too. Would be nice if someone could help.
Thank you.
Hello, about a week ago i bought a brand new htc hero, and bein the idiot i am, i installed a custom rom, before activating my sprint phone
All i want to know is can i activate my phone even though it has a custom rom?
Yeah I'm pretty sure you can still activate your phone, all you have to do is call them and they'll do everything from their end. I dont see how rooting or putting a custom rom on will hinder you, unless you went in person or something.
It will need to be a Sense rom, I believe. AOSP won't cut it. If you're on AOSP, just do a backup and flash a stock rom. After you've done the activation, you can just restore the backup.
I need help. I know very little about the android stuff even though I have had the phone nearly 3 years I think. I got a problem of flashing(my first experience of flashing the firmware). Let me put it in details. I have xperia SL. My friend helped flash a new custom rom (MIUI) so my phone was rooted and unlocked bootloader. because there were always problems happening( not smooth, and apps always stopped working during they were in the process) while I was using the MIUI Rom. I decided to flash it by myself to firmware I had before, but I did a lot of reading about it before I did it, but I don't think i understand all. Before it was flashed, it had the stock: LT26ii_6.2.B.1.96. I tried to look for this one. But I could find only the firmware for Xperia S. I tried, but during flashing problems happened it said something like flashing aborted, I don't know why. when I turn my phone on it displayed only reparing picture on screen...then I tried to turn it off by holding volumn up key and power button for 10 seconds and tried to flash another frimware but It is the old version: LT26ii_6.1.A.2.55_1266-9957_Singapore by xdaNomNomM. It worked this time. I looked for the firmware of LT26ii_6.2.B.1.96 and I got one it is LT26ii_6.2.B.1.96_Generic. I decided to flash my phone again. Yes, flashing process till the end was fine. I didn't see any error message or something. But after flashing, I disconnect it and turned it on because I got the message to do so. It displayed the repairing image again, don't know what is wrong. I decided to flash it again using the old firmware again 4.0.4 it works and now I am stuck using the ICS, not really satified with it. Anyone can help provide the links to download the firmware LT26ii_6.2.B.1.96 that work for me? and can you tell what could be the problems while I was flashing? what should I do to my phone now, keep it like that?
Thank in advance! Sorry that I write a lot for you to read and sorry to disturb you all!
Rosely said:
I need help. I know very little about the android stuff even though I have had the phone nearly 3 years I think. I got a problem of flashing(my first experience of flashing the firmware). Let me put it in details. I have xperia SL. My friend helped flash a new custom rom (MIUI) so my phone was rooted and unlocked bootloader. because there were always problems happening( not smooth, and apps always stopped working during they were in the process) while I was using the MIUI Rom. I decided to flash it by myself to firmware I had before, but I did a lot of reading about it before I did it, but I don't think i understand all. Before it was flashed, it had the stock: LT26ii_6.2.B.1.96. I tried to look for this one. But I could find only the firmware for Xperia S. I tried, but during flashing problems happened it said something like flashing aborted, I don't know why. when I turn my phone on it displayed only reparing picture on screen...then I tried to turn it off by holding volumn up key and power button for 10 seconds and tried to flash another frimware but It is the old version: LT26ii_6.1.A.2.55_1266-9957_Singapore by xdaNomNomM. It worked this time. I looked for the firmware of LT26ii_6.2.B.1.96 and I got one it is LT26ii_6.2.B.1.96_Generic. I decided to flash my phone again. Yes, flashing process till the end was fine. I didn't see any error message or something. But after flashing, I disconnect it and turned it on because I got the message to do so. It displayed the repairing image again, don't know what is wrong. I decided to flash it again using the old firmware again 4.0.4 it works and now I am stuck using the ICS, not really satified with it. Anyone can help provide the links to download the firmware LT26ii_6.2.B.1.96 that work for me? and can you tell what could be the problems while I was flashing? what should I do to my phone now, keep it like that?
Thank in advance! Sorry that I write a lot for you to read and sorry to disturb you all!
Click to expand...
Click to collapse
Sorry dude but don't ask so long question.... No one has time to read it ....
noob w/rooted & unlocked d800 stuck on 4.2.2 (JDQ39b) need help flashing custom rom!
hey guys so ive had my lg g2 since Feb 2015, bought it ATT and unlocked and using it on cricket. so i rooted it soon after getting and tried flashing a rom and i cant remember what i did wrong but in between flashing a kernel and rom i briked my phone. i had used goomanager to flash twrp 2,6,3 i believe and then that to flash a rom. needless to say i wanted to go from 4.2 to the newest possible rom with no bloatware and very slim with good battery, undervoltage and overckock etc. after weeks having the lg dead and of using a different phone i spent some time trying to figure it out, and used the LG tool to flash the lg back.
now after doing this my phone was back to 4.2 and worked fine except i havent had data or mms working and the battery life is really bad. phone has been like this for a very long time. been so busy that havent had the luxury to experiment snd risk bricking again as i need to at least make calls and text. but i am SICK od paying for data and not having it. please dont tell me to search threads uve spent months before doing that and did all kinds of flashing to no avail. i need help in step by step to get twrp back working, to get the right kernel, to get the newest android version that is STABLE/long lasting battery and perhaps most importantly to have data back.
thanks in advance guys
current version: 4.2.2
baseband version: m8974a AAAANAZM 1.0.190034
build: JDQ39B
software version: d800 10d