Hello guys. I just had an unexpected problem. i finally managed to install custom firmware (miui to be exact) and i have A BIG PROBLEM!!!
When i press the power button, in order to lock in, my phone just shuts down!
I tried installing different versions of miui, I even installed CM to to test.. but problem still apears. This means i cant use any custom firmwares, except standart one.
I saw many comments, that people saying it works and etc. but mine lock in button just shuts down the whole phone.
Huawei u8800pro
Android Version: 2.2.2
Kernel Version: 2.6.32.9-perf
Build number: 203026
Please, i beg you, help someone! Give atleast a tip or smth, I would appreciate any help.
I was helping him with this, since i have more expierience with flashing and rooting phones (Hey DHD and Xperia X1), and i can add that the phone was stock bought, and CWM was installed. It was not upgraded to 2.3.5 (Why would you need to do that, if you later wipe it via CWM. Or maybe that update contained some baseband update we needed?), it was just CWM installation, and then zip flashing via the menus. 2x MIUI ROM's were tryed, one CM7 ROM. All three of which were causing shutdowns when you lock the phone. I had the same problem with my DHD some time ago when running MIUI, but then it was just kernel related, so we tryed the CM7 ROM, but it was hanging too. Would be nice if someone could help.
Thank you.
Related
I Know this should be in the Developer section, but I don't have enough posts. (Since you have to have at least 10 to do so...)
BUT, I installed a kernel from Blades which is the 1.6ghz with the latest version of CWM. The problem is that whenever I try to boot up the device it just stays on the first startup screen, and it also makes a weird popping noise from the speakers about every 10 seconds. I did wipe Dalvik Cache and I also made a back up before installing the new kernel. I've tried restoring but it does the same thing every time. Before installing the kernel I was running PRIMEORDIAL! v3.1...
Any help would be greatly appreciated....
Thanks
cdp
Hi Mate, You are not the only one. Unfortuantely 3.0.1 kernels don't work too well with 3.1 roms as you have discovered.
Not to worry though as this is an easy fix.
Simply flash the 3.1 stock kernel and you're up and running again. You can get it from here... http://forum.xda-developers.com/showpost.php?p=14283676&postcount=94
Wow, I didn't even realize that kernel was only for 3.0.1 lol. THANK YOU! Flashed it and it started right up! C:
You may now have wifi problems, since the kernel update will have installed a different module to the one you need, if this is the case just reflash whatever rom you are using.
Okay cool, I'm on wifi now and it seems to be working fine. So thanks again! :]
Hi All,
I had flashed my LG Optimus One P500 with Stock ROM + Custom Recovery with the help of this forum.
I had also rooted my mobile and tried to install ICSLunarPro v2.4.3. Post Installation, I could see that the status bar is not appearing and the mobile doesnt recognize the mobile network GSM/3G. Even the media such as mp3 and images were not recognized in the respective applications.
Below are the details about the issue:
Mobile: LG Optimus One P500
Current ROM/Firmware version: V20C + Custom Recovery (CWM)
Android Version: Android 2.3.3
SD Card Size: 8 GB
Custom ROM: ICSLunarPro v2.4.3 (to be installed)
Link: http://forum.xda-developers.com/showthread.php?t=1408952
I would like to know if this problem is due to baseband version compatibility issues. Please let me know your opinions on this. Even I had installed another ROM (ICS Themed with Android 2.3.7) which had the similar issues like this as well.
Thanks!!
You certainly have a new baseband, if you want to flash ROMs which support only old baseband you must revert to old baseband first.
Otherwise if you don't want to play with your baseband then there are other ROMs available here built over v20 platform.
Is it possible to upgrade the baseband according to the ROM or it would make some serious problems due to mobile network?
My phone has the latest baseband (v20g europe) and i have recently tested some CM-based ROM's without flashing the old baseband. The rom's work perfectly and you simply do not have GSM or data connection (wi-fi works though). If you are having problems with a ROM, they are very likely caused by unclean partitions: make sure to always do a factory reset, wike cache and format /system before applying a new ROM via zip file.
bye
I also flashed the new ICSLunarPro 2.4.6 with the New Baseband v20G(Used an guide on here to switch to it when I tried an Gingerbread ROM for an while.) I didn't realize it was an v10E baseband ROM, but the ROM still installed correctly and all. I did an switch of the baseband after and service worked when I did so but the dev for ICSLunarPro recommends an complete wipe/reinstall for it to work correctly.
What I would suggest doing, go into your recovery(i recommend CWM Recovery) Wipe Data, Cache, Dalvik Cache, and Battery Stats. Then Flash ICSLunarPRo, wait for it to boot, change the theme with Theme Chooser to either Ice Cream or LunarUI, then go back to Recovery, apply the Patch he posted for 2.4.6, then it should be set. Resetting the Dalvik is very important if you had an ROM running before hand, I think you skipped that.
Akhil
Hiiiiiiiiii
I also have the same problem,,
I am novice in this line, With the help of Google, I some how managed to upgrade my lg optimus p 500 to 4.0.0
Everything was well going, but when I tried tu upgrade it to 4.1, I lost my network bars neither GSM NOR 3G
Itried a lot of things but my phone stucked on LG logo.
Then I again took help of Google and fixed my phone to 2.2.2
Now I have upgraded it to 2.3.7
Whenever I upgrade it to 4.0 or 4.1, I lost my network bars...
Can anybody please help me out.
I am writing the description below.
Please help me on my email [email protected]
Android version
2.3.7
Baseband Version
LGP500AT-00-V10e-APP-XX-
FEB-23-2011+0
Kernel version
2.6.35.10-cyanogenmod
[email protected]
CPU info
ARMv6-compatible processor rev 5 (v6I)
Codename
[email protected]
akhilsood2007 said:
Hiiiiiiiiii
I also have the same problem,,
I am novice in this line, With the help of Google, I some how managed to upgrade my lg optimus p 500 to 4.0.0
Everything was well going, but when I tried tu upgrade it to 4.1, I lost my network bars neither GSM NOR 3G
Itried a lot of things but my phone stucked on LG logo.
Then I again took help of Google and fixed my phone to 2.2.2
Now I have upgraded it to 2.3.7
Whenever I upgrade it to 4.0 or 4.1, I lost my network bars...
Can anybody please help me out.
I am writing the description below.
Please help me on my email [email protected]
Android version
2.3.7
Baseband Version
LGP500AT-00-V10e-APP-XX-
FEB-23-2011+0
Kernel version
2.6.35.10-cyanogenmod
[email protected]
CPU info
ARMv6-compatible processor rev 5 (v6I)
Codename
[email protected]
Click to expand...
Click to collapse
You need the old baseband fix. Search the forum and you will surely find it.
Nexus7/ParanoidAndroid/MKernel
Good.. you didnt create a new thread for this.
There are only two types of baseband in LG P-500.
New Baseband.. " v20 c/d/e/g etc "
Old BB " v10 c/d/e/h etc".
As FitAmp said.. nowadays all the roms are made for NEW Baseband.
You can either upgrade Baseband using various methods or use a temporary FIX.
Flash the first link in my signature below AFTER flashing any rom.
If you arent able to flash the fix.. normally unzip it.. paste it in /system/lib using rootexplorer. Set right permissions.
Aki
Thankyou so very much.
I am getting signal now.
However WIFI Tethering has stopped working, but dont makes a big difference....
I am heartly thankful to you for your kind support..
Hi,
I tried almost all the roms to see wich one fits me the most and when testing all the roms I came across a problem that I can't manage to solve myself.
Here is the problem:
I downloaded Elegancia rom (ICS) and it worked fine, installed fine, etc. But I saw that they had a rom Elegancia (gingerbread) so I thought what's the diffrence and wanted to put the gingerbread rom on my phone. But here starts my problem. After installing the rom like I always did and starting up my phone, it keeps booting (htc logo, elegancia logo, off, htc logo, elegancia,logo, off,...). So I tried many diffrent roms again to see where the problem lies and it seems that I can only use ICS based roms now. The gingerbread roms (wich I also tried before) doesn't work for me anymore and after installation of a gingerbread based rom it keeps starting up.
Can anyone tell me how to get the gingerbread rom back to work?
Greetings Crasherke
you had to install a other firmware, dont know the number but youll find it in the firmware thread use something under the newest it will help
edit: here it is download and install 1.17 and it will work
http://forum.xda-developers.com/showthread.php?t=1459767
EDIT2: And next time search! here are a lot of threads with the same problem! For example (Want back Gingerbread) it is too much work for you to search first than make a thread?
I found a firmware thread and read it. If I'm right, the I have the 3.24 version and I need the 3.12 version for gingerbread to work. It wasn't smart of me to assume that a higher version of firmware is compatible with all previous roms. Thanks for the quick reply and you point me right back into the right direction.
Greetings Crasherke
Hi there, I have been trying for countless hours to make a custom ROM work on my P920 with no results, always some issues. I've managed to brick my phone in different ways a billion times now, then spent billion hours unbricking it and in the end I'm always back to where I started. I would really love some help please.
My phone is P920.
The android version I'm running is: 2.3.5
Kernel version: 2.6.35.7+
Software version: V21E
Rooting method: megatron
Now I would like a ROM that uses Android 4 and that can still use the 3D features such as 3D camera, the ROM calledthe Darkroom International would be an example I imagine.
While that's one of the ROMs that I would want, I've tried many, and always encountering issues, let me clarify.
First of all my device has to be rooted and since SuperOneClick doesn't work for me as it gets stuck on step 7, I use megatron which works well. I even double check if my phone is rooted with the Root Checker from the Android store. Now according to the guides I've read I need a custom recovery system, so I install Clockworkmod. I then place the ROM on the SD card, in the recovery menu I delete cache, that other cache, format it, format system, data, everything those guides tell me to. Afterwards, I install the ROM by selecting the zip and then I reboot. I've tried like 3 different ROMs, jellybem, cyanogenmod and some other. Yes I know none of them support 3D features - I didn't know at the time. Anyway, the issue was always the same, right after the LG logo there would be a screen with some weird colors showing the display of what happened before the phone crashed. Before it crashed? Yes, the phone would actually boot into the ROM but only for a few minutes, crashing afterwards. The next time I would boot, it would show that weird screen with those fancy colors with what happened just before it crashed. So I followed some steps and I got back to the original 2.3.5 ROM, everything back to normal.
I tried doing some more research and I came across the Darkroom Intentional ROM which had a bit different instructions. It asked me to install TWRP recovery with a bootloader, so I did, successfully, then did all the clean cache etc, installed ROM, bam, wouldn't boot at all. Oh boy have I had issues here, I couldn't even get it back to the default 2.3.5 stock ROM because my phone wasn't even recognized in the device manager. So I did some more research, found a solution, managed to flash back to 2.3.5 stock and I'm back to square one.
Now, could someone please help and explain to me what exactly have I done wrong and how I can make it right? I've spent countless hours now trying to install a custom ROM with no success. Sorry about the long read. If you need me to supply some more information please let me know. Thank you.
First of all if u want to use an ICS ROM then u need to update to ICS FIRST u can't flash it directly from 2.3.5 u can use xbsalls thread to update......
Next if cm based Roms are crashing then u need to flash bootloaders which means u should use os_hacking tool to flash ICS bootladers if u wanna update
Or flash GB bootloaders
So first update if u want
Root
Flash bootloaders
Flash recovery
Flash Roms
Sent from my Nexus 4 using xda app-developers app
I've been running cloudyg3 2.1 for about 6 months and I've developed an echo problem during calls( on the other end) and I've noticed a lag both problems in the last week. I'm running 4.4.2, M8974A-AAAANAZM-1.0.190084 Baseband, KERNAL VERSION 3.4.102 BUILD KOT491 on a D801 . No other mods. I tried running backup from existing recovery but failed twice. I've redownloaded Autorec , the baseband version and CloudyG3 2.2 as per cloudyfa but haven't run it because id rather be a vagina with an echoing phone than a dude with no phone at all. Would someone mind giving me some advice? Could my problem be solved with a fresh install or upgrading to 2.2? Should I hold my breath for Lp? And could someone walk me through the steps?
I really do appreciate the help and I'll gladly pay it back .
Thanks
[email protected]
dpulley77 said:
I've been running cloudyg3 2.1 for about 6 months and I've developed an echo problem during calls( on the other end) and I've noticed a lag both problems in the last week. I'm running 4.4.2, M8974A-AAAANAZM-1.0.190084 Baseband, KERNAL VERSION 3.4.102 BUILD KOT491 on a D801 . No other mods. I tried running backup from existing recovery but failed twice. I've redownloaded Autorec , the baseband version and CloudyG3 2.2 as per cloudyfa but haven't run it because id rather be a vagina with an echoing phone than a dude with no phone at all. Would someone mind giving me some advice? Could my problem be solved with a fresh install or upgrading to 2.2? Should I hold my breath for Lp? And could someone walk me through the steps?
I really do appreciate the help and I'll gladly pay it back .
Thanks
[email protected]
Click to expand...
Click to collapse
Are you sure that you don't have any tweak? It might be a ROM problem. I suggest you to flash the newest version of CloudyG3. If you have a problem with the recovery, is always good to have it up-to-date and then flash the newest ROM.
In my case I always had problems with the newest versions of Cloudy. I used to have it on my phone until 1.3 version and then the data did not work for me, so decided to go with Optimus G3 1.4.1, which was the last ROM I used in my LG G2 and everything worked smoothly. If you have the availability, give it a try.
SergioRmz said:
Are you sure that you don't have any tweak? It might be a ROM problem. I suggest you to flash the newest version of CloudyG3. If you have a problem with the recovery, is always good to have it up-to-date and then flash the newest ROM.
In my case I always had problems with the newest versions of Cloudy. I used to have it on my phone until 1.3 version and then the data did not work for me, so decided to go with Optimus G3 1.4.1, which was the last ROM I used in my LG G2 and everything worked smoothly. If you have the availability, give it a try.
Click to expand...
Click to collapse
Thanks. I appreciate the help. I found a video on YouTube with some guy flashing the exact same and it turned out fine.
I couldnt get it to back up using TWRP from the first flash of CloudyG3 2.1 so I used LG backup and saved it to pc. Then I flashed the Basrband for KitKat and CloudyG2 2.2 simultaneously. I beleive 2.2 to be the newest. Everything went through for the most part. All important data was there but I did have to reset up my contact profile and my display setting. also also the knock code does not consistently work. it didn't fix my sound issue but it did rerevert my camera back to what I had when I originally flashed G3 2.1. after that's all said and done, I remembered flashing a fix to repair the knock code on 2.1 and that's how I lost the camera in the first place.
anyway, everything's good . I stretched my G2 for an extra year without feeling like I had missed out on anything. I wonder how many others did the same thing. Cloudyfa may want to keep an eye out for LG ninja's. Thanks again.
Dennis Pulley