Hi there. I got trouble rooting my Blackview BV5500Pro with Android 9.0
Its not the first smartphone im rooting, so im not new to this. But im also not a professional or something, even english is not my native language so sorry for my bad grammar.
At first i tried the way i done this bevore to my smartphones:
1. Unlock OEM via Fastboot
2. Flash TWRP 3.3.0 (The only working twrp i found) to Recovery
3. Boot into TWRP.
To this point everything works fine.
But when i install Magisk 21.4. i get a bootloop.
also when i install SuperSu 2.8.2
So i tried to patch the boot image via Magiskmanager App 8.0.7.. Everything works fine. I can flash the patched boot image via fastboot, twrp or sp flash tool. But when i open Magisk after booting the patched image, there is no option to install Magisk or root the Phone. Only to patch the boot image. Even when i boot the patched image directly with fastboot.
Maybe somone here can help me.
Best regards, Jules.
Edit: I Also treid to install Liniage OS 17 and 18. Via fastboot, twrp and sp flash tool, but also get a bootloop.
Hi
I'm sorry, I cant't answer your question, but I have one to you: I'm trying to install LineageOS on a bv5500pro too (by the guide from here), but I'm stuck at the TWRP installation. Can you tell me how you managed to do it and do you have perhaps a link to the TWRP you used?
I did unlock the bootloader by toggling OEM Unlock in developer settings, then via fastboot: fastboot flashing unlock. Then reboot.
Then I pushed TWRP 3.2 (from this source here, from the tutorial here) by fastboot flash recovery recovery.img. When I tried then to boot directly after flashing into twrp recovery by holding vol up + power, then selecting recovery mode and confirming with vol down, it tries to boot normally instead of recovery. I think, my TWRP flashing didn't work properly. Booting into TWRP by fastboot boot recovery.img doesn't work either, there it reboots and tries to boot normally too. fastboot tells me that it loses connection (normal, since my phone reboots, I think?):
Code:
fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.017s]
booting...
FAILED (status read failed (No such device))
finished. total time: 23.457s
What I have to confess, is that I did wipe the system, data and cache partitions using fastboot erase <partition>, perhaps someone knows if I have problems with twrp because of that? (I know that I shouldn't have done this, sometimes curiosity is equal to stupidity...) I did this because I tried to install LineageOS without twrp. Was a bad idea, I know now...
I am on a HP proBook using Debian 10 with adb and fastboot installed. Not sure if MK65xx drivers are installed. Might this pose problems?
Thanks in advance to all here!
EDIT: Sorry, I forgot to mention a lot of things. I corrected some of them here. A more complete overview in another post can be found here.
hi, at least im not alone having trouble with the BV5500pro. I don't remember where i got the twrp exactly, but i uploaded it for you.
File-Upload.net - recovery-verified.rar
Datei: recovery-verified.rar. Die Datei wurde von einem User hochgeladen. Laden Sie auch kostenlos Dateien hoch mit File Upload.
www.file-upload.net
At first i flashed TWRP with fastboot. But then everytime i could boot in twrp only one time. After the next reboot the stock Recovery was reinstalled. So i used the Stock images
Blackview BV5500 Pro factory firmware (flash file)
This Blackview BV5500 Pro firmware flash file (stock ROM) can help you easily un-brick or restore your device to its default or factory state. If you have previously rooted or modified the system (or other) partition of the phone in any way, flashing this stock ROM will overwrite all existing...
www.leakite.com
and replaced the recovery-verified.img with the TWRB image and fashed everyting wit sp flashtool on my phone. After that TWRP was permanent.
Ok, great, thanks for your fast reply. I'll try it again with your image.
GiRonimoon said:
At first i flashed TWRP with fastboot. But then everytime i could boot in twrp only one time. After the next reboot the stock Recovery was reinstalled.
Click to expand...
Click to collapse
How did you boot into TWRP then? By Volume up + power, then selecting recovery mode and confirm with vol down? or by terminal/fastboot command?
edit: small grammar
By Volume up + power.
Thank you
Ok, quick update: Flashing worked, but reboot not, I think. I managed to boot into TWRP, but I managed too once with my image before (I forgot to mention), where the screen was then not responding. A complete description of my case can be found here on xda. Sorry for the late corrections that are made in this post, I'll correct them above...
Now after the flash with the image from GiRonimoon above, I can boot into TWRP and the TWRP start screen shows: TWRP Recovery Project 3.3.0-by *nemo-nemo* (4pda.ru), and when I'm in, the screen is not responding. It was like this with my first TWRP image too, so perhaps the flashing didn't work and I have still my old image which is not working?
GiRonimoon said:
By Volume up + power.
Click to expand...
Click to collapse
Ok. But when I boot into recovery, the exact things I do is:
1. phone powered off
2. Hold volume up + power until boot mode selection screen appears
3. Select recovery mode with volume up, then confirm with volume down
4. the phone reboots (screen goes black for about 1 sec), Blackview logo is shown (as well as a 'orange state' warning message), 5 sec delay because of orange state.
5. screen goes black for 1/2 sec
6. TWRP is open, screen not responding, asking for password for decryption
Exactly the same for booting into recovery via terminal/fastboot (just insert fastboot command at 1.). So since the phone reboots once in between, is it possible that my new TWRP is erased every time? Do your BV5500pro behaves also like this (except the orange state, I think)?
Thanks in advance
How long you are waiting? In my case TWRP needs a long time to start. At first i was thinking that it freezes at startup.
I just foubnd out that every boot into twrp causes a boot loop.. Even when i just boot twrp to see the versionnumber, and then reboot normaly.
GiRonimoon said:
How long you are waiting? In my case TWRP needs a long time to start. At first i was thinking that it freezes at startup.
I just foubnd out that every boot into twrp causes a boot loop.. Even when i just boot twrp to see the versionnumber, and then reboot normaly.
Click to expand...
Click to collapse
When I manage to boot into TWRP it's rather fast - I have to wait around 7 sec or so, maybe 10. But I only manage sometimes. Normally I have to do fastboot boot recovery.img, and after that do the normal steps to boot into recovery. If I try to boot into recovery, it just tries to boot normally (which ends in a bootloop)...
But I think I'll try to flash a stock rom and retry from there, as it was suggested here.
Related
Hi i own an honor 8 FRD-L09 and it's rooted , so the other day i updated the EMUI from 4.1 to 5.0 and my xposed installer said frame work is not intsllad and then i checked my supper su and it said my phone was not rooted and that this point i was what!!
so tried to boot up to the TWRP recovey and gusses what i cant and frist it showed my the the phone recovey options not the custom TWRP that i installed before. i flased The TWRP Recovey in to my phone and wrote the commoade [adb reboot recovery] so it would boot the TWRP That i just flashed but gets stuck on your devie is booting now for 20 min!!! so i thought and this moment hey what not factory rest your phone and everthing mabye the then i can re root my phone but once agian it got stuck on the same screen as when i tried boot TWRP [ YOUR DEVICE IS BOOTING NOW] So a this point i gave up and i wonder did this happedn to you guys who updated ther honor 8 and can you re root you phone again?
oh P.S when i hold the power and volume down buttom my phone turns on when i hold the power and volume up buttom for tre sec it goes to the honor 8 revory mode not the twrp and its saying download the new version of the recovey and its fails evey time and when hold the power and the volume buttom simultaneously i think it't trying to boot the TWRP recovey but it get's stuck on you deviec is booting now screen.
and soryy for my english the my frist languages
i too faced the same problem. some one please help
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Mine won't boot to TWRP and when I use the EMUI boot screen its saying it can't connect to Huawei erecovery servers. So I can't even wipe the root at this point. Any ideas?
Many Thanks!
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Well this worked for me, after a day of googling. the twrp-3.1.1-1-frd.img worked, it may have been following the instructions about "fastboot reboot, while holding the volume up.
hey guys.. having the same issue..
I have DUK-L09C432B183 bootloader unlocked and phone u locked..
I downloaded twrp and side loaded with adb/fastboot
but when I reboot (fastboot reboot) it doesn't enter twrp recovery but emui recovery menu.. any suggestions?
(I tried fastboot reboot whole holding volume down.. didn't work)
ok [EDIT] i could finally get TWRP installed .. i backup everything on external SD
then i flashed MAGISK.zip (v14) and from there phone will show HONOR and jsut now it booted into HUAWEI Erecovery and gives me 2 options "factory data reset "Q or Download latest version and recovery !
any suggestions how i can ROOT it ? should i keep on try with MAGISK or ? thank you guys !
SECOND EDIT
so i did FACTORY data reset.. then i ADB side loaded twrp emmc .. then i installed magisk 13.3 .. rebooted and everythign goodf ! i've twrp and device is rooted !!
all good
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Thank you so much for linking to that image file! I was looking on the internet for days!
Telperion said:
While your phone is plugged into a computer with a USB cable, hold down volume down + power until your phone enters the bootloader. From there, flash the TWRP from this thread:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563
After flashing, hold down volume up and reboot with 'fastboot reboot'. Once you see your phone is booting message, let go of volume up and it should load TWRP. If it freezes and doesn't load after 3-5 minutes, try the official TWRP from twrp.me (for Marshmallow devices) since your Nougat flash may be messed up. If neither works, then flash the stock recovery from bootloader and follow the instructions to do a force-update with the full stock system image.
Click to expand...
Click to collapse
Hi,
If I used the official TRWP 3.1.1 first and it didn't work, can I just go ahead and flash the TWRP using the modified twrp.img at the above link to see if that works?
Hi !
I've unlocked my bootloader, flash TWRP with success (the shell tell me that works), and when I reboot the phone and use de key combo go to recovery, I've no TWRP, just a screen which say me that my device boot, and it can keep at this point all the time if I don't reboot him. If I go to eRecovery, that's eRecovery which boot, no TWRP, and if I boot normally, it boot on Android.
I've tried every solution of this post, where the author seem to have exactly the same problem.
Can you help me, please?
(Please excuse my bad english)
Tinerion said:
Hi !
I've unlocked my bootloader, flash TWRP with success (the shell tell me that works), and when I reboot the phone and use de key combo go to recovery, I've no TWRP, just a screen which say me that my device boot, and it can keep at this point all the time if I don't reboot him. If I go to eRecovery, that's eRecovery which boot, no TWRP, and if I boot normally, it boot on Android.
I've tried every solution of this post, where the author seem to have exactly the same problem.
Can you help me, please?
(Please excuse my bad english)
Click to expand...
Click to collapse
What TWRP you flashed. What's your Android version. This happens when your flashed TWRP is corrupt or incompatible. To exit the screen, press and hold all three buttons (Volume Up and down and power). It will bring up Dload and will fail. Then reboot tell me your Android version so I can give you proper TWRP
Mannan Qamar said:
What TWRP you flashed. What's your Android version. This happens when your flashed TWRP is corrupt or incompatible. To exit the screen, press and hold all three buttons (Volume Up and down and power). It will bring up Dload and will fail. Then reboot tell me your Android version so I can give you proper TWRP
Click to expand...
Click to collapse
I've flash :
- twrp-3.2.3-0-berlin.img
- twrp-3.2.2-0-berlin.img
- twrp-3.2.1-0-berlin.img
- twrp-3.1.1-0-berlin.img
- twrp-3.1.0-0-berlin.img
(A people on the post I've link have explain that the version can be the problem, so I've tried many of them, and none of them have work ^^)
My android version is the 7.0, with EMUI 5.0.3.
Tinerion said:
Hi !
I've unlocked my bootloader, flash TWRP with success (the shell tell me that works), and when I reboot the phone and use de key combo go to recovery, I've no TWRP, just a screen which say me that my device boot, and it can keep at this point all the time if I don't reboot him. If I go to eRecovery, that's eRecovery which boot, no TWRP, and if I boot normally, it boot on Android.
I've tried every solution of this post, where the author seem to have exactly the same problem.
Can you help me, please?
(Please excuse my bad english)
Click to expand...
Click to collapse
Just unplug your cable bro
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
zahidhasanzahid said:
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
Click to expand...
Click to collapse
Have you tried booting the recovery by pressing Power + Vol up?
zahidhasanzahid said:
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
Click to expand...
Click to collapse
Now since you are bootlooping we would need to install MIUI back again, to do this download the MiFlash Tool and the fastboot ROM for the latest MIUI, now copy it's file path and paste in MiFlash Tool, also make sure it detects your phone, now in the bottom right corner there would be an option like flash_everything_except_internal (similar to this) so that the internal storage isn't erased, now flash the ROM and let the phone boot up atleast once.
Once that's done use this TWRP (https://forum.xda-developers.com/re...unofficial-twrp-3-3-1-proper-t3933531/page4), it has a fix for the encryption bug and won't lead to a bootloop (the password/code/pattern asked in it is the same as the phone's), now you have TWRP installed and running
Thanks for your support. I followed the instruction and bootup the phone. But I'm afraid of flashing TWRP ?
It worked. I installed TWRP without any issue . Thanks again ?
TWRP 3.3.1 has bug, reinstall TWRP 3.2.3 and boot to recovery and then reboot to system.
Naveenthemi said:
Now since you are bootlooping we would need to install MIUI back again, to do this download the MiFlash Tool and the fastboot ROM for the latest MIUI, now copy it's file path and paste in MiFlash Tool, also make sure it detects your phone, now in the bottom right corner there would be an option like flash_everything_except_internal (similar to this) so that the internal storage isn't erased, now flash the ROM and let the phone boot up atleast once.
Once that's done use this TWRP (https://forum.xda-developers.com/re...unofficial-twrp-3-3-1-proper-t3933531/page4), it has a fix for the encryption bug and won't lead to a bootloop (the password/code/pattern asked in it is the same as the phone's), now you have TWRP installed and running
Click to expand...
Click to collapse
I have now flashed TWRP. But my phone isn't booting into TWRP recovery and the power button and volume UP button is booting the phone into MIUI recovery. Also when booting into the system, it's asking for a password when I had no passwords on the device. Will MiFlash Tool help in this case??
mad_hat said:
I have now flashed TWRP. But my phone isn't booting into TWRP recovery and the power button and volume UP button is booting the phone into MIUI recovery. Also when booting into the system, it's asking for a password when I had no passwords on the device. Will MiFlash Tool help in this case??
Click to expand...
Click to collapse
The password is on the phone lock screen? In that case your device must have got encrypted, you might have to format all partitions and then flash with Mi Flash.Do have a try with MiFlash first, might help if it's not encrypted. Also make sure you used the right commands to flash the recovery, and use OrangeFox or Peter's.
hey,
so I guess I made a major mistake. I wanted to flash twrp recovery with this ramdisk.img , it all worked fine, I could flash it and then I entered the recovery mode via adb with the command adb reboot recovery. The recovery mode twrp logo popped up and all I can see is the name teamwin and the project version, which says 3.2.1-0 btw and the names of the developers nothing more, the screen is frozen and I can't do anything else.
I tried to reboot into fastboot and bootloader with adb but all I does is, that the screen turns off then on and then it says "your device is booting now…" and it leads me back to the teamwin logo and freez again.
I can't do a normal reboot and I can't flash another .img recovery..
I hope someone can help me please..
There must be a way to get out of this.
MrSYS said:
hey,
so I guess I made a major mistake. I wanted to flash twrp recovery with this ramdisk.img , it all worked fine, I could flash it and then I entered the recovery mode via adb with the command adb reboot recovery. The recovery mode twrp logo popped up and all I can see is the name teamwin and the project version, which says 3.2.1-0 btw and the names of the developers nothing more, the screen is frozen and I can't do anything else.
I tried to reboot into fastboot and bootloader with adb but all I does is, that the screen turns off then on and then it says "your device is booting now…" and it leads me back to the teamwin logo and freez again.
I can't do a normal reboot and I can't flash another .img recovery..
I hope someone can help me please..
There must be a way to get out of this.
Click to expand...
Click to collapse
Were you on android 9 or 8, prior to flashing twrp?
Android 9.1, however I did this but I could get back to eRecovery after I pressed the volume up key and on/off key several times. I normally rebooted my phone and now I can use it again ?
But its still frustrating that it didn't work
anyone managed this? 10.4 flashes ok, and i can install twrp recovery but can't get it to start into twrp. using 'fastboot boot twrp.img' while holding up restarts but screen eventually shows kinda corrupted colours then restarts. recovery remains as standard miui.
apesgrapes said:
anyone managed this? 10.4 flashes ok, and i can install twrp recovery but can't get it to start into twrp. using 'fastboot boot twrp.img' while holding up restarts but screen eventually shows kinda corrupted colours then restarts. recovery remains as standard miui.
Click to expand...
Click to collapse
What version MIUI version exactly? And what TWRP did you use?
You must install 3.3.1 or Orange Fox otherwise you will brick.
https://forum.xda-developers.com/redmi-6/how-to/clearing-twrp-ambiguity-versions-t3981875
Che0063 said:
What version MIUI version exactly? And what TWRP did you use?
You must install 3.3.1 or Orange Fox otherwise you will brick.
https://forum.xda-developers.com/redmi-6/how-to/clearing-twrp-ambiguity-versions-t3981875
Click to expand...
Click to collapse
cereus_global_images_V10.4.4.0.PCGMIXM_20190927.0000.00_9.0_global_d8716e22a3.tgz
twrp-3.3.1-0-cereus.img
tried orangefox but same symptoms.
before trying with 3.3.1 i had tried with 3.3.0, same symptoms but escaped by reflashing V10.3.6 and it was all fine.
apesgrapes said:
cereus_global_images_V10.4.4.0.PCGMIXM_20190927.0000.00_9.0_global_d8716e22a3.tgz
twrp-3.3.1-0-cereus.img
tried orangefox but same symptoms.
before trying with 3.3.1 i had tried with 3.3.0, same symptoms but escaped by reflashing V10.3.6 and it was all fine.
Click to expand...
Click to collapse
I'm on 10.4.4 too but I used https://mifirm.net/downloadtwrp/62 3.3.1 by LR team.
Che0063 said:
I'm on 10.4.4 too but I used https://mifirm.net/downloadtwrp/62 3.3.1 by LR team.
Click to expand...
Click to collapse
cheers, will give that a try.
Che0063 said:
I'm on 10.4.4 too but I used https://mifirm.net/downloadtwrp/62 3.3.1 by LR team.
Click to expand...
Click to collapse
managed to flash that but can't boot into recovery, holding up doesn't give the corrupted colours, but it eventually vibrates then just boots into system again.
apesgrapes said:
managed to flash that but can't boot into recovery, holding up doesn't give the corrupted colours, but it eventually vibrates then just boots into system again.
Click to expand...
Click to collapse
Do you see the TWRP screen at all? I'm on 10.4.4 Global ROM on 4/64GB China Redmi 6 (unlocked bootloader of course)
1. Flash the recovery as normal
2. enter 'fastboot reboot recovery'. Hold down Vol + when you press Enter on your computer
3. Keep holding down the volume up
4. After a while the TWRP logo will show up. Do not let go of Vol +
5. Within another 5-10 seconds the phone will reboot. Do not let go of Vol +
6. The phone should then boot into TWRP again. On the second reboot into TWRP, you can let go of Vol +
After installing I'm not able to flash magisk successfully
theirs no install error adhere then system encription BS ..
zip gets flashed successfully but no magisk manager installed , after manually installing magisk manager akp, theirs no magisk system component installed
any ideas ?
Glitches instead of TWRP Rec Mode
Hey guys, I have got the same problem.
I had problems rooting the phone with twrp problems, such as: "couldn't mount" and "data encrypted" while doing the wipe format data. And Once I fixed these problems the phone got stuck at boot (not boot loop, it just was in boot for 20+ minutes).
So I flashed the last firmware with miflash. Installed it. The phone worked and I could go in fast boot mode.
But when I installed the twrp, in recovery mode, it just showed glitches with green, red, blue colours. I tried different versions of twrp and also tried to wait 20+ minutes and flash it in the terminal.
Nothing.
The phone is unlocked and I have usb debugging etc... in developers options.
Now I flashed the firmware again but still the same problem. I think that 10.4 may be the problem.
I would love to know if someone has the solution... I'll still try to use older versions of stuff.
that's exactly what I have installed - just to point out:
global image tested: cereus_global_images_V10.4.4.0.PCGMIXM_20190927.0000.00_9.0_global_d8716e22a3
twrp used:
twrp-3.3.1-0-cereus.img 16.6M 2019-05-19 03:42:44 EDT
twrp-3.2.3-2-cereus.img 16.6M 2018-12-26 19:51:21 EST
twrp-3.2.3-0-cereus.img 15.7M 2018-11-13 18:42:11 EST
I am a beginner in the android world so If I say something off, that's the reason why
rooting problems part 2
Guys, I would really appreciate if someone could read this message and tell me what to do, I would be glad to spam him thanks meter.
So I fixed the glitchy things in twrp flashing this: cereus_global_images_V10.3.3.0.OCGMIXM_20190610.0000.00_8.1_global_66306fcb5b
then I had the twrp recovery asking for ? a password?
(not the type "yes" and no the phone password either...).
I tried different twrp and this one didn't ask it: twrp 3.2.3.1cereus
as always I had the problem "couldn't mount data" that I fixed by --- advanced wipe --- data --fat/exfat... But then it gave me the same problem again.... "unable to wipe data" "unable to format or remove encription" and I forgot to write down how I fixed it...
Finally, after all of these problems, I did a format data properly and it worked. I turned off the phone and moved magisk.zip in the "android" folder in the sd card.
I installed it in the twrp and it worked. I rebooted the phone clicking "reboot phone" at the end. It asked for a password (whatever I typed was correct) and it said to me that the data was corrupted and that I had to reset the phone... I clicked reset and now is stuck in the twrp every time I turnoff.
I can access the fastboot mode but this is a loop (I should try another global image and see if it works but the problem is after the twrp process...). I would really appreciate if someone could help me solve this. I'm not pretending, I'm just asking. I respect your time and I hope someone could help. Thanks for reading.
Orange fox e TWR não funcionou na versão 10.4.4
consegui quando fiz um downgrade para 10.3
Same Problem here.
MRedmi 6 cereus
MIUI11
used latest TWRP twrp-3.3.1-0-cereus
I can flash it by using fastboot flash recovery recovery.img
but
'fastboot reboot recovery' doesnt boot the phone into twrp recover. It boots into system
Any solution or this?