Database Info

[Resolved] Pico Stuck at TeamWin Recovery Screen

Hey,
My Htc pico has been stuck on teamwin (TWRP) recovery splash screen. I messed up
What causes this ?
I have installed Latest TWRP 3.0.2 from TWRP website.
What Other issues ?
- Volume Down button broken
- Cannot boot to fastboot mode, when i connect the phone from pc it automatically boots the TWRP (broken) recovery and hangs on teamwin splash screen
What i tried ?
I tried booting it to bootloader mode from pc by entering adb reboot bootloader. DIDNT WORKED.
I tried making a bootable TWRP recovery but its not working. Followed this guide http://androidforums.com/threads/gu...d-or-twrp-bootable-sd-card-06-04-2013.327798/
Can anybody provide me with a solution
Issue Resolved:
Update: Keep sending adb reboot bootloader command to phone while it reboots to recovery mode when you connect USB cable.
Make sure you have ADB Tools version 1.0.32 or later.

Thanking you an infinite number of times:good::good::good::good::good::good::good:. I had the same issue with my Pico. I lost every hope......but finally you arrived I changed to yannou90 recovery from TWRP. Now everything is working fine on CM9 :good::good::good:
By the way.....i'm guessing what could have caused the issue .....A corrupted TWRP ??

KingOfCosmos said:
Thanking you an infinite number of times:good::good::good::good::good::good::good:. I had the same issue with my Pico. I lost every hope......but finally you arrived I changed to yannou90 recovery from TWRP. Now everything is working fine on CM9 :good::good::good:
By the way.....i'm guessing what could have caused the issue .....A corrupted TWRP ??
Click to expand...
Click to collapse
I guess so A corrupted TWRP img File that we just or previously flashed or Sometimes we get so excited that we miss a step while installing recoveries or ROMS.
I am glad that i helped you

please can you put links what to do in stuck "HTC TEAMWIN" logo? how u fix it?

Ukito said:
please can you put links what to do in stuck "HTC TEAMWIN" logo? how u fix it?
Click to expand...
Click to collapse
All you have to do is Keep sending adb reboot bootloader command to phone while it reboots to recovery mode when you connect USB cable.
Make sure you have ADB Tools version 1.0.32 or later.
GET ADB TOOLS 1.0.36 here https://forum.xda-developers.com/htc-one/general/tool-updated-adb-version-1-0-32-fastboot-t2932160

System is not booting after flashing TWRP

I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.

zahidhasanzahid said:
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
Click to expand...
Click to collapse
Have you tried booting the recovery by pressing Power + Vol up?

zahidhasanzahid said:
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
Click to expand...
Click to collapse
Now since you are bootlooping we would need to install MIUI back again, to do this download the MiFlash Tool and the fastboot ROM for the latest MIUI, now copy it's file path and paste in MiFlash Tool, also make sure it detects your phone, now in the bottom right corner there would be an option like flash_everything_except_internal (similar to this) so that the internal storage isn't erased, now flash the ROM and let the phone boot up atleast once.
Once that's done use this TWRP (https://forum.xda-developers.com/re...unofficial-twrp-3-3-1-proper-t3933531/page4), it has a fix for the encryption bug and won't lead to a bootloop (the password/code/pattern asked in it is the same as the phone's), now you have TWRP installed and running

Thanks for your support. I followed the instruction and bootup the phone. But I'm afraid of flashing TWRP ?

It worked. I installed TWRP without any issue . Thanks again ?

TWRP 3.3.1 has bug, reinstall TWRP 3.2.3 and boot to recovery and then reboot to system.

Naveenthemi said:
Now since you are bootlooping we would need to install MIUI back again, to do this download the MiFlash Tool and the fastboot ROM for the latest MIUI, now copy it's file path and paste in MiFlash Tool, also make sure it detects your phone, now in the bottom right corner there would be an option like flash_everything_except_internal (similar to this) so that the internal storage isn't erased, now flash the ROM and let the phone boot up atleast once.
Once that's done use this TWRP (https://forum.xda-developers.com/re...unofficial-twrp-3-3-1-proper-t3933531/page4), it has a fix for the encryption bug and won't lead to a bootloop (the password/code/pattern asked in it is the same as the phone's), now you have TWRP installed and running
Click to expand...
Click to collapse
I have now flashed TWRP. But my phone isn't booting into TWRP recovery and the power button and volume UP button is booting the phone into MIUI recovery. Also when booting into the system, it's asking for a password when I had no passwords on the device. Will MiFlash Tool help in this case??

mad_hat said:
I have now flashed TWRP. But my phone isn't booting into TWRP recovery and the power button and volume UP button is booting the phone into MIUI recovery. Also when booting into the system, it's asking for a password when I had no passwords on the device. Will MiFlash Tool help in this case??
Click to expand...
Click to collapse
The password is on the phone lock screen? In that case your device must have got encrypted, you might have to format all partitions and then flash with Mi Flash.Do have a try with MiFlash first, might help if it's not encrypted. Also make sure you used the right commands to flash the recovery, and use OrangeFox or Peter's.

Problems Rooting Blackview BV5500Pro

Hi there. I got trouble rooting my Blackview BV5500Pro with Android 9.0
Its not the first smartphone im rooting, so im not new to this. But im also not a professional or something, even english is not my native language so sorry for my bad grammar.
At first i tried the way i done this bevore to my smartphones:
1. Unlock OEM via Fastboot
2. Flash TWRP 3.3.0 (The only working twrp i found) to Recovery
3. Boot into TWRP.
To this point everything works fine.
But when i install Magisk 21.4. i get a bootloop.
also when i install SuperSu 2.8.2
So i tried to patch the boot image via Magiskmanager App 8.0.7.. Everything works fine. I can flash the patched boot image via fastboot, twrp or sp flash tool. But when i open Magisk after booting the patched image, there is no option to install Magisk or root the Phone. Only to patch the boot image. Even when i boot the patched image directly with fastboot.
Maybe somone here can help me.
Best regards, Jules.
Edit: I Also treid to install Liniage OS 17 and 18. Via fastboot, twrp and sp flash tool, but also get a bootloop.

Hi
I'm sorry, I cant't answer your question, but I have one to you: I'm trying to install LineageOS on a bv5500pro too (by the guide from here), but I'm stuck at the TWRP installation. Can you tell me how you managed to do it and do you have perhaps a link to the TWRP you used?
I did unlock the bootloader by toggling OEM Unlock in developer settings, then via fastboot: fastboot flashing unlock. Then reboot.
Then I pushed TWRP 3.2 (from this source here, from the tutorial here) by fastboot flash recovery recovery.img. When I tried then to boot directly after flashing into twrp recovery by holding vol up + power, then selecting recovery mode and confirming with vol down, it tries to boot normally instead of recovery. I think, my TWRP flashing didn't work properly. Booting into TWRP by fastboot boot recovery.img doesn't work either, there it reboots and tries to boot normally too. fastboot tells me that it loses connection (normal, since my phone reboots, I think?):
Code:
fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.017s]
booting...
FAILED (status read failed (No such device))
finished. total time: 23.457s
What I have to confess, is that I did wipe the system, data and cache partitions using fastboot erase <partition>, perhaps someone knows if I have problems with twrp because of that? (I know that I shouldn't have done this, sometimes curiosity is equal to stupidity...) I did this because I tried to install LineageOS without twrp. Was a bad idea, I know now...
I am on a HP proBook using Debian 10 with adb and fastboot installed. Not sure if MK65xx drivers are installed. Might this pose problems?
Thanks in advance to all here!
EDIT: Sorry, I forgot to mention a lot of things. I corrected some of them here. A more complete overview in another post can be found here.

hi, at least im not alone having trouble with the BV5500pro. I don't remember where i got the twrp exactly, but i uploaded it for you.
File-Upload.net - recovery-verified.rar
Datei: recovery-verified.rar. Die Datei wurde von einem User hochgeladen. Laden Sie auch kostenlos Dateien hoch mit File Upload.
www.file-upload.net
At first i flashed TWRP with fastboot. But then everytime i could boot in twrp only one time. After the next reboot the stock Recovery was reinstalled. So i used the Stock images
Blackview BV5500 Pro factory firmware (flash file)
This Blackview BV5500 Pro firmware flash file (stock ROM) can help you easily un-brick or restore your device to its default or factory state. If you have previously rooted or modified the system (or other) partition of the phone in any way, flashing this stock ROM will overwrite all existing...
www.leakite.com
and replaced the recovery-verified.img with the TWRB image and fashed everyting wit sp flashtool on my phone. After that TWRP was permanent.

Ok, great, thanks for your fast reply. I'll try it again with your image.
GiRonimoon said:
At first i flashed TWRP with fastboot. But then everytime i could boot in twrp only one time. After the next reboot the stock Recovery was reinstalled.
Click to expand...
Click to collapse
How did you boot into TWRP then? By Volume up + power, then selecting recovery mode and confirm with vol down? or by terminal/fastboot command?
edit: small grammar

By Volume up + power.

Thank you
Ok, quick update: Flashing worked, but reboot not, I think. I managed to boot into TWRP, but I managed too once with my image before (I forgot to mention), where the screen was then not responding. A complete description of my case can be found here on xda. Sorry for the late corrections that are made in this post, I'll correct them above...
Now after the flash with the image from GiRonimoon above, I can boot into TWRP and the TWRP start screen shows: TWRP Recovery Project 3.3.0-by *nemo-nemo* (4pda.ru), and when I'm in, the screen is not responding. It was like this with my first TWRP image too, so perhaps the flashing didn't work and I have still my old image which is not working?
GiRonimoon said:
By Volume up + power.
Click to expand...
Click to collapse
Ok. But when I boot into recovery, the exact things I do is:
1. phone powered off
2. Hold volume up + power until boot mode selection screen appears
3. Select recovery mode with volume up, then confirm with volume down
4. the phone reboots (screen goes black for about 1 sec), Blackview logo is shown (as well as a 'orange state' warning message), 5 sec delay because of orange state.
5. screen goes black for 1/2 sec
6. TWRP is open, screen not responding, asking for password for decryption
Exactly the same for booting into recovery via terminal/fastboot (just insert fastboot command at 1.). So since the phone reboots once in between, is it possible that my new TWRP is erased every time? Do your BV5500pro behaves also like this (except the orange state, I think)?
Thanks in advance

How long you are waiting? In my case TWRP needs a long time to start. At first i was thinking that it freezes at startup.
I just foubnd out that every boot into twrp causes a boot loop.. Even when i just boot twrp to see the versionnumber, and then reboot normaly.

GiRonimoon said:
How long you are waiting? In my case TWRP needs a long time to start. At first i was thinking that it freezes at startup.
I just foubnd out that every boot into twrp causes a boot loop.. Even when i just boot twrp to see the versionnumber, and then reboot normaly.
Click to expand...
Click to collapse
When I manage to boot into TWRP it's rather fast - I have to wait around 7 sec or so, maybe 10. But I only manage sometimes. Normally I have to do fastboot boot recovery.img, and after that do the normal steps to boot into recovery. If I try to boot into recovery, it just tries to boot normally (which ends in a bootloop)...
But I think I'll try to flash a stock rom and retry from there, as it was suggested here.

Stuck at TWRP Loop!

My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks

I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo

farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
Nothing to worry and don't panic,
I've been facing problem like this.
To enter bootloader / download mode. With USB Cable plugged You must press and hold Power + Vol Down button then count it for 7-8 seconds, after that immediately release Power button, and press Vol Up + Down. Repeat this step if fail. U will see Download mode.
Regards.

szymin22 said:
I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo
Click to expand...
Click to collapse
Just need perfect count like 7-8 secs You will faced Download mode.
Regards.

farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
You hold volume down + power button for 7 seconds and phone will be power off.
Then you press both volume buttons (vol up + vol down) and plug in cable what is connected to computer, this pusch you to download mode of phone.

farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply

play 5 said:
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply
Click to expand...
Click to collapse
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
fastboot devices
Click to expand...
Click to collapse

Krys89 said:
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
Click to expand...
Click to collapse
If you mean Fastboot when I go to the official a750fn recovery there are a part his name install update from adb
If you mean it Im trayed only this command Fastboot reboot and after phone boted to OS
A think it mean its work right?
Or if fastboot the download mode yes it is work
Waiting your reply

Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
fastboot devices
Click to expand...
Click to collapse
it must show the id of device

Krys89 said:
Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
it must show the id of device
Click to expand...
Click to collapse
I used these command many time but in adb mode

exactly this is the thing I missing the Fastboot mode to...

Hi, Bennie from Holland here, with the same problem: tried to flash Twrp to the Samsung A750FN and now stuck in not working Twrp logo, flashing for 2 seconds and further a black screen< The fastboot using Odin can be used via the method described by szimin22, bur the adb fastboot gives no response. Does someone know the correct trwp version for this mobile or a firmware file that can be flashed by Odin?

A Week Later ...
i have installed on the a7 the firmware dated okt 2020 and i can install without any prob trwrp or PBRP! but the machine goes into bootloop again. The only thing which seems to be resolved is a normal functional recovery. Now the return to the phone itself and we are home! any suggestions, pls give us a chance to not smash the a7 through the kitchenwindow

TWRP's Logo is flashing and no access to fastboot

Today i wanted to install TWRP, so i unlocked the bootloader and flash :
- TWRP-3.5.1-guacamole-Nebrassy-3.img
it worked and then in TWRP i installed :
-wrp-installer-3.5.1_9-0-guacamole.zip​but then it restart and now the phone is stuck with le logo of TWRP which is displayed 0,4sec, and disappears just after for 5sec, and then it reappears... I can turn off the phone but it imediatly reboot to twrp, and even if a do Volume up or down + Power button, it always brings me to twrp.
So i'm stuck in a twrp bootloop without access to fastboot or the system.
If someone has an idea i will be very glad.
Thanks

Finally I used the EDL mod with the special cable. Worked well