Related
Hi everyone!
Got this Miphone A3 yesterday, and I been searching like a fool after information about this damn phone but it ain't a easy thing to find.
But hey, what do you expect from a cloned iphone
So here's my question:
Anyone sitting on a Miphone and have you done anything with it, most imporant for everything, ROOTED?
Phone info on the phone:
Model number:
A8
Where I bought it, it said A3 on the site (mobino1), same on the battery.
But instead of the iPhone Ui it has the Android Ui pretty sweet that it didnt have the iPhone Ui.
Firmware:
1.5
Don't have Android Market app, but everything looks like Android, also works to install . apk apps tried to install apps from 1.6+ but doesn't work.
Kernel:
2.6.25
Build number:
Linkworld Project .0002_A.1_01r_100129
Been looking for that build number for a while now, don't have any info at all on that one.
Hope some1 here has some info, would be a blessing for me!
EDIT:
I found my way into what i think is the recovery mode, came up a where is said enter flash mode put in usb cable, with red background. Then when i did that, the screen turn blue saying "Enter Flash mode, Begin to flash image..."
Been reading a lot, and i never came up with that kind of "bootloader" just saying that
hope some1 could give me some tips
hi, one of the stores provided firmware from A3, I do not know how fresh. ussd queries are unsuccessful, after ussd calls to hang up. In flash mode turns pressing the upper side volume buttons and switch.
depositfilescom/files/0po3pwcu6 - miphone A3 rom
thanks for that one!
flashed my phone, worked! but it wasnt the same version. this one was with the iphone ui (using ahome)
Model number:
A3
Build number: A3 Project.0001_18r_100411
Seems like my 3G connection does not work with this version. ussd, unsuccessful on this version too, same with previous version.
I was wondering, tried to open the one.bin (flash image) but cannot extract it. Any way to extract the image and try to reconfigure the build?
the phone using "tavor platform" flashing software, anyone know anything about tavor platform?
still trying 2 modify the rom I have, no luck so far.
I do also have this phone from mobino1...
how do you try to modify the firmware you have?
Regards,
xift
miphone a3
I too am with the same problem I have software for Tavor flashing but without success for updated the firmware is in a single bin file without being able to extract and modify
if anyone knows how do to then updated
xift said:
I do also have this phone from mobino1...
how do you try to modify the firmware you have?
Regards,
xift
Click to expand...
Click to collapse
I been trying to extract the .bin file MagicIso can read the file using it "missing files" but can't read the files when extracted. Trying to find a program that could read the rom file, have you done anything to update the phone? Do you have a rom file, if so could you upload it pls?
tried to get the firmware from mobino1 but they just ignore mig those bastards.
Ernest25
miphone a3
I too am with the same problem I have software for Tavor flashing but without success for updated the firmware is in a single bin file without being able to extract and modify
if anyone knows how do to then updated
Click to expand...
Click to collapse
Do you want to flash your phone with the .bin file you already have or do you want to know how to update the phone to android 1.6+?
To flash your phone with tavor flashing software, you need to run the flash program in XP and press "volume up" and "power" on the phone to get to flash mode, then plug in the usb with the flash program open, and it automatically flash the phone.
About updating the phone to a newer version of android I have not a solution.
I been trying to, get info on the hardware so I could try to cook a own rom with at least android 2.0
Cheers
sorry i don't have the firmware as a rom file either...
and these mobino1 bastards ignore me too ^^
although they admitted they could contact the developers...
new firmware would be nice... or at least the current firmware.
I did not downgrade it yet and I think I won't do that.
Another problem could be that the bootloader only runs signed firmware image (just guessing).
I know how to flash I want is a newer room the problem these Chinese are not then updated dependent on us for a updated
(question) has a possibility to use, one firmware and change to a bin file to MiPhone a3
xift said:
sorry i don't have the firmware as a rom file either...
and these mobino1 bastards ignore me too ^^
although they admitted they could contact the developers...
new firmware would be nice... or at least the current firmware.
I did not downgrade it yet and I think I won't do that.
Another problem could be that the bootloader only runs signed firmware image (just guessing).
Click to expand...
Click to collapse
Ernest25 said:
I know how to flash I want is a newer room the problem these Chinese are not then updated dependent on us for a updated
(question) has a possibility to use, one firmware and change to a bin file to MiPhone a3
Click to expand...
Click to collapse
If they just told me straight up, we just sell the phone, we don't have any contact what so ever with the manufacture or developers I would accept it. But this just pissed me off.
I've been asking around on other sites that sells the phone, waiting on answers from them. Hopefully they are more friendly.
Don't downgrade, that was a mistake for me (the rom file azat182 nicely posted).
I tried something yesterday, made a own .bin file with android 2.1 but the flash program wouldn't start with it (parse ini error) so I tricked the flash program that it would flash the one.bin (azat182) rom file.
After it opened I replaced the .bin file with mine. Everything seems to work fine, did every step it should like, root system etc finished 100% when I tried to turn the phone on I couldn't, maybe it didn't know were the power "button" source came from.
The android source was made for an other phone, so I wasn't surprised.
Plugged the usb back in, and luckily the phone connected somehow with the computer so I flash it with the (azat182) rom and I'm back at square -1
but now I think, if I could find out the hardware/drivers on this damn phone it would work to cook a own rom using that method.
Cheers
Oh hey, someone else with one of these phones. I've been messing with mine for a while, started out with the A8 rom (from fastcardtech), and have flashed the A3 rom to the device. I've noticed that the gps works a lot better in the A3 rom than the A8, so it's not much of a downgrade, imo. Recently I've made some headway with an android 2.1 port to the device.
Anyway, this device isn't hard to root. If you adb into it, you can get root from the device by remounting /system as RW and pushing a fixed su binary to /system/bin, or wherever it goes, it's been a while
The MTD partitioning in the Miphone's rom is a big giant mess. The rom is split into 25 partitions, the kernel isn't in boot.img like it's supposed to be, neither are the kernel parameters.
The bootloader is dumb, it doesn't check for signed images. The A3 image and A8 image are both engineering builds.
wow you seem to know a lot about it...
does 3g work for you in the a3 rom? also gps doesn't work for me in a8... so a3 could be a possibility if 3g worked.
how did you adb your phone? I could not connect... the driver just didn't show a phone. although I changed the vendor ids etc...
could you write a short tutorial of some sort? would be nice!
if you are root, couldn't you make a backup of your firmware?
is there a downloadable a8 rom at fastcardtech?
regards, xift
I haven't been able to get 3g working, just edge. I don't think the 3g will work in the US, as none of the carriers will work with just wcdma2100, but I'm no expert on the subject. I've had reasonably good luck with the gps with an app called Maverick, but I don't have a data plan currently, so no agps. With gps alone, it takes about a minute or so in an open area to acquire a lock.
For ADB, there's a driver in the android sdk, but don't bother with it. Instead, the phone's going to show up as a rndis/ethernet gadget. For windows, drivers for this can be found at webos-internals.org/wiki/USBnet_networking_setup, just the .inf is all you'll need; MacOS and Linux will just see the ethernet gadget. Once that's installed, the phone will show up on the PC side as a network interface that will need an IP address; I've been using 169.254.231.10 and subnet 255.255.255.0. Once your network interface is configured, you should be able to run adb connect 169.254.231.168:5555, assuming you've got your android sdk tool set up already. From there, you can adb shell in and poke around. Once you get an adb shell, you'll have a root prompt, but to get 'rooted' so that other android apps can make use of it, you'll want to run adb remount to remount /system as RW, then copy a working version of su over to the phone. I think superuser whitelist comes with one.
I don't usually go to that much trouble, as I end up cycling between the A3 firmware and my Eclair build a lot, and the A3 rom is jacked up to where it's a pain to get a terminal emulator running on it. Adb from my desktop seems to get the most mileage.
Fastcardtech didn't have any useful information about recovery firmware that they had, a release date for an android 2.1 rom, information on the manufacturer, anything.
Wow thanks a lot... I tried with the sdk driver.
port 5555 seemed blocked there although it was obviously responding (took much longer than other ports). Thanks for your help - I'll try that one.
Could you upload your eclaire build?
I don't have much time at the moment because of my bachelor's thesis. But I'd like to see that and maybe I could help a bit. Although I do not have any experience with mobile devices etc.
You may need to mess with the usb debugging option. After flashing to the a3 rom, it's enabled. I remember it being the same between the a8 and a3 roms.
At some point, yeah, I'll my eclair build up. I'd like to at least get bluetooth, gsm and wifi going again before I do. I don't have a rom that you'd be able to flash currently; more like a big pile of build scripts, and install scripts for the android system and ramdisk.
yeah I understand that. You could open a google code project or something.
nice to know that there is somebody working on this.
usb debugging is enabled by default. I'll just have to try again.
thanks for your help so far.
file inf
I not have disk only cd and dvd when I will install the drive without the disk says no drive found I save the file as usbnet-pre.inf
if anyone can help me pls
well I also had problems installing the driver in windows ...
It always said something like "No driver found at that location".
You could try on linux though... It worked like a charm for me.
I'm root now
@nsigma is there anything I could provide you from the a8 image?
xift said:
well I also had problems installing the driver in windows ...
It always said something like "No driver found at that location".
You could try on linux though... It worked like a charm for me.
I'm root now
@nsigma is there anything I could provide you from the a8 image?
Click to expand...
Click to collapse
linux complicated for me but thank you I hope good news from you about how root this bastard mobile
I have the A3 if you're interested I can pass to you
I am sure these have been answered at different places on the forums but please clarify on these points...
1. OTG support ..Those with Kikats can access otg fully (read/ write/ read again without reboots) and if yes Does it needs root access or unlocked bootloader?
2. Free space...I gather I will have 12 gb free space on the device ...Can I install apps on all 12gb or is the app install memory is limited by partition?
3. Screen Cast/ mirroring...Does the kitkat enables it by default?
P.S I would prefer not to root/unlock BL the device for atleast a month Just to make sure everything is working finee...
1. I have not tried it but what i read is that on Kit Kat you need a third-Party-app. On 4.3 it was working, so i had read.
2. The 8 GB version has approximately 5.5 GB free
3. There is (4.4.2) a cast screen option in settings. It said no nearby devices when i clocked it once. Never used it . Seems like it is enabled.
mokkami said:
1. I have not tried it but what i read is that on Kit Kat you need a third-Party-app. On 4.3 it was working, so i had read.
2. The 8 GB version has approximately 5.5 GB free
3. There is (4.4.2) a cast screen option in settings. It said no nearby devices when i clocked it once. Never used it . Seems like it is enabled.
Click to expand...
Click to collapse
I don't mind a 3rd party app as long as it does not need Root access
Sent from Samsung Chat
Can not test it for you, sry.
First i am rooted and secondary i forgot my phone at friends place.
But maybe just go into the play store and search for it.
It might be (or also not) mentioned in the app description.
Do you happen to know this 3rd party app's name?
USB OTG Helper is one of these
Edit
IMPORTANT - ROOTED devices ONLY!!
Click to expand...
Click to collapse
Another one is Stickmount, also root needed.
Here is a thread.
Ah well Thanks buddy Looks like it won't just cut without rooting....the only reason I was thinking of otg was that the 16 gb version is out of stock here so I was looking into 8 gb ...anyway now I will just wait for 16 gb
jaspreet997 said:
Do you happen to know this 3rd party app's name?
Click to expand...
Click to collapse
nexus media importer is the app( no root)!
jaspreet997 said:
I am sure these have been answered at different places on the forums but please clarify on these points...
1. OTG support ..Those with Kikats can access otg fully (read/ write/ read again without reboots) and if yes Does it needs root access or unlocked bootloader?
2. Free space...I gather I will have 12 gb free space on the device ...Can I install apps on all 12gb or is the app install memory is limited by partition?
3. Screen Cast/ mirroring...Does the kitkat enables it by default?
P.S I would prefer not to root/unlock BL the device for atleast a month Just to make sure everything is working finee...
Click to expand...
Click to collapse
1. yes,on my xt1033 kitkat asian retail,there even an option for format external drive. i dont know why ppl say kitkat have no usb otg,i just need oi file manager and otg cable,tried on mouse as well.
2. yes,virtually all of it can be use to install apps.
3.i seen the option under display option,never use it.
nickchk said:
1. yes,on my xt1033 kitkat asian retail,there even an option for format external drive. i dont know why ppl say kitkat have no usb otg,i just need oi file manager and otg cable,tried on mouse as well.
2. yes,virtually all of it can be use to install apps.
3.i seen the option under display option,never use it.
Click to expand...
Click to collapse
Thank you very much
Sent from Samsung Chat
abhirulz94 said:
nexus media importer is the app( no root)!
Click to expand...
Click to collapse
Looks promising ...would check it out when I get the device..
to prove my point(stop stupid ppl from saying kitkat moto g have no otg)
i gonna use just otg cable and stock oi file manager
@nickchk sweet ....so you can read and write on the usb drive.....Basically Some users (not necessarily stupid) had an issue with writing ..Others cud not access the pendrive again once removed without a reboot
nickchk said:
to prove my point(stop stupid ppl from saying kitkat moto g have no otg)
i gonna use just otg cable and stock oi file manager
Click to expand...
Click to collapse
Not stupid people, just people with a different firmware on the phone. There is definitely no native USB OTG support on current UK 4.4.2 stock firmwares (or a Stock File Explorer for that matter). So it looks like Motorola enabled it for the later release in Asia - lucky folk. Hopefully they will see fit to push an OTA to other variants to enable the feature.
In the meantime for a cost Nexus Media Importer works fine for non-rooted devices without native support (read / write)
Cast Screen option Pointless!!!!
Did anyone realise?!
There was supposed to be a menu option in the Cast Screen Settings
its through the menu that allows You to cast the screen to wirelessly stream video and audio
This " Cast Screen" option has no point at all on the Moto G, it does not make any sense???
Look here:
https://forums.motorola.com/posts/e4e6d28297
First of all thanks for porting Kitkat to our device! This is a great rom, running smoothly on P880, however, I faced with an issue, which can be a "show stopper" for those who need bluetooth connections. Unfortunately, bluetooth can't be turned on. When I try to activate bluetooth after 4-5 secs returns to off state.
Have you experienced simalar problems? Have you found the root case? Do we have a solution or a workaround? Thanks!
jhevesi said:
First of all thanks for porting Kitkat to our device! This is a great rom, running smoothly on P880, however, I faced with an issue, which can be a "show stopper" for those who need bluetooth connections. Unfortunately, bluetooth can't be turned on. When I try to activate bluetooth after 4-5 secs returns to off state.
Have you experienced simalar problems? Have you found the root case? Do we have a solution or a workaround? Thanks!
Click to expand...
Click to collapse
I've same issue. Any solution? This ROM is very fast but this problem for my use is annoing.
I came from CM11 that i used for almost 1 month. but have many lags same day installed also that have problem with audio on calling and power on display from sleep that require many times to click twice or restart device.
Help please...
FIX thanks to CM11
Hi.
I tried files from latest CM11 build for P880. I have inserted the files into the attachment in this post.
NOTE: THIS ISN'T A FLASHABLE ZIP. EXTRACT AND COPY INTO CORRECT FOLDERS
My work now. Turn on and see devices. I don't had time to test connection but i think is working.
EDIT: I tested for 1 week and use with no problem BLUETOOTH HANDSET and FILE TRANSFER.
There are 7 files.
3 into /system/lib
3 into /system/etc/bluetooth
1 into /system/vendor/lib
I take backup of files, copy on respectively forder and restore permissions
Owner RW
Group R
Other R
I see that don't need reboot but might help
Thanks to CM11
AdrenSnyder said:
Hi.
I tried files from latest CM11 build for P880. I have inserted the files into the attachment in this post.
NOTE: THIS ISN'T A FLASHABLE ZIP. EXTRACT AND COPY INTO CORRECT FOLDERS
My work now. Turn on and see devices. I don't had time to test connection but i think is working.
EDIT: I tested for 1 week and use with no problem BLUETOOTH HANDSET and FILE TRANSFER.
There are 7 files.
3 into /system/lib
3 into /system/etc/bluetooth
1 into /system/vendor/lib
I take backup of files, copy on respectively forder and restore permissions
Owner RW
Group R
Other R
I see that don't need reboot but might help
Thanks to CM11
Click to expand...
Click to collapse
Hi,
Can you please indicate were should i upload those files?
Thanks
Cleophas said:
Hi,
Can you please indicate were should i upload those files?
Thanks
Click to expand...
Click to collapse
Hi there. If you open the zip the files are compressed with the correct path.
however:
/system/etc/bluetooth/
auto_pair_devlist.conf
bt_did.conf
bt_stack.conf
/system/lib
libbluetooth_jni.so
libbt-hci.so
libbt-utils.so
/system/vendor/lib
libbt-vendor.so
I used ROM of 10/02/2014 not the last 27/02/2014. (http://forum.xda-developers.com/showthread.php?t=2639397)
Actually use it like my daily rom with only a problem with tethering not working.
[TUTORIAL][GUIDE]Complete Guide to ROOTING, CWM & ROM(s) for LAVA ETAB XTRON+(RK3066)
Here is a short review first
| HARDWARE |:-: Talking about the Lava Xtron+’s hardware, the tablet boasts a dual core Cortex A9 CPU with each core clocked at 1.5Ghz and a Mali 400 Quad Core GPU.
Well, for the proof of graphics power, see the benchmarks by fonearena.com ,63.9 fps in nenamark, and the most important thing according to me, RK3066 IS THE BEST LAST GEN GAMING CHIPSET BETTER THAN TEGRA 3...I am a true geek and after searching for 20+ hours came to a conclusion that this is the best piece of android till 12-13k,(except Lumia 520 but it is windows)..
| BATTERY | :-:Coming on to battery, When I opened the battery stats page I find that Cell standby had consumed nearly 60% of the battery.WHAT!? Cell standby is the battery used by radio cells for mobile networks. This tablet DOES NOT have cell radio! The engineers working on this tablet didn't even bother to setup the OS properly and instead chose to simply download Android 4.2, flashed it in the tablet and have put it up on sale.
The Flipkart page reports the battery capacity to be 3,700mAh, which is probably wrong since the official specifications page on Lava’s website reports it to be only 3,000mAh. I can't be sure..:silly:
AIRPLANE MODE IS NOT COMPLETELY WORKING DUE TO DEFECTIVE DRIVERS (CELL RADIO DRIVERS ARE PRESENT IN THIS TAB SO IT SEARCHES FOR DRIVERS CONTINUOUSLY AND FUC*S BATTERY UP!:crying There is a fix in the post
| SCREEN |:-:The front of the Lava Xtron+ holds a 7-inch sharp IPS LCD display having a resolution of 1024 x 600. It’s a bright screen and with a pixel density of 170 PPI, it is pretty sharp too. The best part about the display is that, despite being an LCD screen, it’s not a battery consuming monster. I always found its battery usage to be lower than processes. The screen is prone to scratches though and is highly reflective.
We can enable the biggest advantage of PC gaming in android now, i.e 4xMSAA in deveoper settings, makes gaming experience even better than tegra 3
Click to expand...
Click to collapse
Before starting i would say that i am not responsible if any guides here bricks your device ( it should not happen at all if u follow all steps properly as the chances of permanent brick of rk3066 is very slim but boot loop is a possibility) I made this thread to collect everything I've done in one place. This should make everything very straightforward and basically most probably n00b-proof.
| ROOTING | :-:
Pre Requisites-Working drivers (if not then no problem), OEM USB Cable, LAVA ETAB XTRON+, 2 windows apps and PATIENCE
{Screen shots of important steps is in the attachements}
(i) For Drivers download and install moborobo
HTML:
http://download.moborobo.com/download/Client/Moborobo(Moborobo_En_official).exe
(ii) In tablet go to in Settings >developers options and turn it on and enable USB Debugging & before connecting it to your PC go into the tab's
settings again and click on storage.In it you will find 3 dots in top right hand corner.> USB computer connection >Enable Mass storage
Note: DO "NOT" TURN USB STORAGE "ON".(When Connected to PC)
Note: Remove your external SD card before rooting.
(iii) Connect it to your PC and click on refresh and install/find drivers and it will download and install them..(there might be a security warning
about force install) Now, it may not recognize the model no, IMEI and other things and say that the device is JB7+ but the only thing you
should look for to make sure it is the right device is the total size and usage of internal Memory and NAND Flash..
(iii) Now drivers are securely installed and the tab is connected in the right way (there is no OEM (LAVA) drivers anywhere)
Download the zdm (Chinese software) in the attachments (For Every Step first see the screenshot)
Note:IT MAY INSTALL SOME USELESS SOFTWARE ON UR PC AND TAB , BUT IT CAN BE UNINSTALLED.
(iii)) When it detects the there will be something written like this in the bottom right corner :??ROOT : ONE or something like that (not in screen
shots as the tab is already rooted ) but it must be in green colour.This is the confirmation that the device can be rooted.
(iv) Now click on the Root Button in left hand side
(v) Click twice on green (thingy) first where it says ROOT then again for the confirmation popup (says something else but in green box)
(vi) Rooting Process has begun and the tab will restart (my PC is quite fast so it was almost instantly restarted and the Super SU was flashed it may or may not take 2-3 mins)
Note:IT WILL INSTALL SUPERUSER , WHICH IS OUTDATED BUT BEFORE DOWNLOADING OTHER SUPERUSER APP , USE THE ONE PRE-INSTALLED TO UPDATE SU BINARY.
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
Also, you should change the WiFi scanning interval to 500 I.e 5 min as you really just require one scan when connecting to a known network..change the wifi supplicant scan interval to 500 build.prop
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
(i) Firstly you have to get the arctools apk,either by registering at their forum..
HTML:
http://www.arctablet.com/blog/forum/arctools-application/clockworkmod-cwm-recovery-easy-install-on-rk3066-and-rk3188-devices/
(ii) Click on download and select RK3066 CWM fun androtabinfo 6.0.3.1, there is only one option like that so it may or may not be in order.
(iii) Afer downloading click on install apps give i superuser permission and Voila! CWM.
(iii) You should also see the log right in the middle of the apps to verify that the flash and push thingy worked correctly with no errors
(iii) Select Reboot to recovery or Turn the tab off and press power button+vol up and the recovery should open
YEAH! YOU NOW HAVE COMPLETE CONTROL OF YOUR TAB
(B)METHOD NOT TESTED BY ME
HTML:
http://androtab.info/clockworkmod/rockchip/
(i) DOWNLOAD RK30GENERIC_CWM.zip from
HTML:
http://androtab.info/clockworkmod/rockchip/
(ii) Here are the different ways to flash this zip file
HTML:
http://androtab.info/clockworkmod/rockchip/install/
|CUSTOM ROM(s)|:-:
There is only one ROM which is worth flashing and even that might be slightly buggy..
Well, I don't recommend to flash a custom ROM here as they may have bugs like Wifi still if you want the following features
Auto Install Feature: This allows you to install apk's automatically on first boot, if you have the apk files located in a folder named autoinstall on your external SD card.
HTML:
http://www.freaktab.com/showthread.php?8910-Auto-APK-Install-Feature
Rooted with SuperSU
Debloated of all Lava bloatware
Google Play Store tweaks added to improve availability of apps
Init.d support
Busybox support
English language default (all other languages are still supported)
Boot screens by Tattman65
Flash Tool by Finless
Reboot app by Petrus
Here is Lava Xtron+ RileyROM 1.1
HTML:
http://www.freaktab.com/showthread.php?10688-Lava-Xtron-RileyROM-1-1
Complete flashing procedure in extreme detail is in the ROM zip file (it is a PDF file named first time user guide , very helpful)..Personally I have not flashed the ROM as I don't think it is worth the hassle and possibility of no Wifi...
PLEASE CLICK ON THANKS IF I HELPED YOU, IT REALLY MOTIVATES ME!:highfive:
Thank you.. I was waiting for a method to crack this tab.. Will comeback with result.
Ext4 support
Can somebody tell me if ext4 is supported or not, when i try link2 sd it says not supported but I am pretty sure that the system partition itself is Ext 4, (I'm the one who made the guide)
Try ext3. It will be supported.
Prince.Paul.K said:
Try ext3. It will be supported.
Click to expand...
Click to collapse
Well, I have tried it there are some problem in link2sd, but according to an nandroid the system and data are ext4 , I have set up everything in ext2 and would hate to do it all over again, is there a way to verify support of ext 3 or 4 acc to wiki, kernel above 2.6 support ext4 and the kernel here is 3.0... One more ting, when I tilt the tab, I think that something heavy is moving around inside slightly, probably battery should I ask for a replacement? I have 4-5 days remaining I bought from flipkart, I do have a complete SD and nandroid backup..
EDIT: in d/tracing events ext4 there is a file called enable and the value inside is zero should I change it to 1
I think I found out the culprit, the first partiton that I tried was ext2 so link2d created a script for that..now, when I try to use ext3 or 4 ..it still tries to use that same script..so I willl delete the script then try again...
Successfully Rooted..! Sorry for the delay..!
Bro how to stop the battery draining in stand by due to deffective drivers as u say . I cant find the solution in this thread
HTC.EXPLORER said:
....
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
..../QUOTE]
ukstillalive said:
Bro how to stop the battery draining in stand by due to deffective drivers as u say . I cant find the solution in this thread
Click to expand...
Click to collapse
Click to expand...
Click to collapse
HTC.EXPLORER said:
HTC.EXPLORER said:
....
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
..../QUOTE]
Click to expand...
Click to collapse
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse
Going to fix battery
Sent from JB 7+ using tapatalk
nitinchamp said:
HTC.EXPLORER said:
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse
Alright I know this is a stupid question but..Does it continue to scan when it is connected to a WiFi network..I have also disabled the network norification and enable WiFi optimization...and thanks for the tip..ideally you should only turn scanning on when you want to connect
Edit: added your tip to guide will clean it up when I will use pc
Click to expand...
Click to collapse
HTC.EXPLORER said:
nitinchamp said:
Alright I know this is a stupid question but..Does it continue to scan when it is connected to a WiFi network..I have also disabled the network norification and enable WiFi optimization...and thanks for the tip..ideally you should only turn scanning on when you want to connect
Edit: added your tip to guide will clean it up when I will use pc
Click to expand...
Click to collapse
it still does scan for networks to see what other networks are present
there was also another method to root this tablet which i found back in december mentioned here
Click to expand...
Click to collapse
help
bro i have installed riley rom for lava xtron + tab but now i came to know that wi fi hotspot is a major bug for this rom and the rom is actually the copy of stock rom so i want to flash the stock rom again but cant ,,, so plz help me i have the stock rom zip file , now what to do ?/
plz reply :crying::crying::crying::crying::crying:
ukstillalive said:
bro i have installed riley rom for lava xtron + tab but now i came to know that wi fi hotspot is a major bug for this rom and the rom is actually the copy of stock rom so i want to flash the stock rom again but cant ,,, so plz help me i have the stock rom zip file , now what to do ?/
plz reply :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Well you are familiar with cwm or do you even have it installed, if you do then just go to install zip from sd card and select the zip file...secondly if you have a cwm nandroid backup (recommended) just go to backup and restore select resotre or restore from externel sd and then select the date of the required backup file then click restore..If you do have a cwm nandroid backup then it MUST work...if you don't even have the recovery then, ist step is to install it through THE guide then, try to do the ist (not recommended) option...
I have cwm installed on my tablet but i dont have stock rom of lava xtron plus
ukstillalive said:
I have cwm installed on my tablet but i dont have stock rom of lava xtron plus
Click to expand...
Click to collapse
Did you make a nandroid cwm backup before flashing ROM?
Also can you make the account as soon as possible
CM10 for Lava Xtron +
nitinchamp said:
HTC.EXPLORER said:
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse
http://www.slatedroid.com/topic/41777-romcyanogen-10-for-rk3066-wip/
Check this thread is it possible to flash this on lava xtron + . Can any1 reply plz
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
I have installed cwm in many devices before but first time in my tab and bro i dont hqlave a nandroid back of my stock rom
Click to expand...
Click to collapse
ukstillalive said:
nitinchamp said:
http://www.slatedroid.com/topic/41777-romcyanogen-10-for-rk3066-wip/
Check this thread is it possible to flash this on lava xtron + . Can any1 reply plz
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
I have installed cwm in many devices before but first time in my tab and bro i dont hqlave a nandroid back of my stock rom
Click to expand...
Click to collapse
Then just take a backup of the ROM you currently have installed (I think Riley) and if the CM doesnt work out, revert back easily..:good: Post your results here
Click to expand...
Click to collapse
Hello, Do you know a custom rom compatible with the Box T9 RK3318 ? The stock rom is too ... Stock ^^ Thank you in advance.
searching too ;-)
I found a Android 9 Stock rom for the T9 64GB 4GB ram version of this box. Best way to upgrade it is by using a SDcard formatted in Fat32 and use the SD card using SD_Firmware_Tool_v146_eng_AndroidPC.zip and the firmware file name is 3318_9.0-TVBOX-Z2_0820.img Make the SD card with the program. Insert the SD card while the box has no power. Hold the button inside the AV port while holding it in. Plug in the power. Then release the button when you see the T9 boot logo come up and it will automatically program the TV box to version 9. The only issue I had was with playstore would not install the apps. But if you install them manually it would update them or using a phone or computer and pick what you want from playstore works it will download and install from there when you select the TV box. Also it will not connect to WIFI while plugged into Ethernet where as the 8.1 allowed both Ethernet and WIFI to be connected at the same time. I am currently searching for the Android 10 version.
Update:
This file is more updated. 3318_9.0-TVBOX-Z4_1025.img Then once its installed run the updater to get the next update to have the latest 9.0 installed.
flood404 said:
I found a Android 9 Stock rom for the T9 64GB 4GB ram version of this box. Best way to upgrade it is by using a SDcard formatted in Fat32 and use the SD card using SD_Firmware_Tool_v146_eng_AndroidPC.zip and the firmware file name is 3318_9.0-TVBOX-Z2_0820.img Make the SD card with the program. Insert the SD card while the box has no power. Hold the button inside the AV port while holding it in. Plug in the power. Then release the button when you see the T9 boot logo come up and it will automatically program the TV box to version 9. The only issue I had was with playstore would not install the apps. But if you install them manually it would update them or using a phone or computer and pick what you want from playstore works it will download and install from there when you select the TV box. Also it will not connect to WIFI while plugged into Ethernet where as the 8.1 allowed both Ethernet and WIFI to be connected at the same time. I am currently searching for the Android 10 version.
Update:
This file is more updated. 3318_9.0-TVBOX-Z4_1025.img Then once its installed run the updater to get the next update to have the latest 9.0 installed.
Click to expand...
Click to collapse
hello, sorry for my English I live in France I would have a question about the box: TV T9 RK3318, 4gb / 64gb. the problem is that the time is desynchronized on restart and creates problems to connect to applications when the time is out of order, I tried everything changed the time zone to deactivate and entered the time Manual it goes out of order all the time . is there a custom version or a version 10?
As far as I know there is no Android 10 available for this TV box. If you want Android 10 time to buy a different Box other than a rockchip based one. As for the time resetting whenever the box is restarted this is normal it only resync when it connects to a time server on the internet. Not sure how you go about fixing that. There is no internal battery to keep time on it like a other devices would have.
Android 10 GSI ? Since the T9 was released on Android 9 and hence Treble compatible
yes no custom rom no Android 10, for now, even with an internal wifi connection sometimes she does not want to synchronize
Hello,
Before going further with this, if you wish to test those firmwares go ahead but you are the only responsible for your acts
I don't want any credits it's just to help ppl out, I was just testing the device myself.
I was also looking for a custom rom for the T9 Rk3318 but couldn't find one (in the box it was mentioned 3318 but when I opened the device in the mainboard it was saying rk3328 :/ )
I flashed some firmwares that I found (not custom) and finally bricked the box.
Then I did the testpoint and recovered it with two firmwares that I found in the link below that seems to be very compatible, all the credits goes to the owner.
https://cloud.mail.ru/public/PqyA/6YkwGagu9/ANDROID 10/
A95XR5_RK3318_Android10_2020-07-10 -- is working great
The one below I found it a bit slower but it also works
RK3318_DC_R1_AP6330_10_20200707.0137working
What doesn't work:
- original remote control
- display leds
...you can tell
You need a tool to flash them
-Rockship factory Tool
-Usb male to usb male cable (you can also find some videos on youtube to make one yourself)
you can find some instructions how to flash here:
Regards
li70 said:
Hello,
...............
Regards
Click to expand...
Click to collapse
This post helped me a lot, didn't have to search aimlessly and after flashing the a95xr5 rom its way better than the Z5 one the tvbox had before. It's still slow but man, compared to the old ROM its usable and not so damn sluggish. Thanks for taking the time to post this.
caxhatq said:
This post helped me a lot, didn't have to search aimlessly and after flashing the a95xr5 rom its way better than the Z5 one the tvbox had before. It's still slow but man, compared to the old ROM its usable and not so damn sluggish. Thanks for taking the time to post this.
Click to expand...
Click to collapse
Yeah that looks identical to my tv box board. The firmware will work that I posted a link to works.
flood404 said:
Yeah that looks identical to my tv box board. The firmware will work that I posted a link to works.
Click to expand...
Click to collapse
I've found an Android 11 ROM for this box, works amazingly well compared to the A95X and the sluggish T9 Z5 ROM. Here is a link to it:
RK3318_DC_HK1_COOL_AP6330_11_20210522.1453.zip
drive.google.com
WIFI works, only the front panel and infrared remote does not work. By the way, I flashed this ROM with an SD card because the USB cable I made was wonky and stopped flashing midway causing the box to not boot at all. It's simple, download the tool I've attached to this post and use it to either flash or just boot the img if you don't wanna flash it to eMMC (Haven't tested the SD Boot function myself but it should work)
This website also helped me a ton: https://forum.armbian.com/topic/17597-csc-armbian-for-rk3318rk3328-tv-box-boards/
caxhatq said:
I've found an Android 11 ROM for this box, works amazingly well compared to the A95X and the sluggish T9 Z5 ROM. Here is a link to it:
RK3318_DC_HK1_COOL_AP6330_11_20210522.1453.zip
drive.google.com
WIFI works, only the front panel and infrared remote does not work. By the way, I flashed this ROM with an SD card because the USB cable I made was wonky and stopped flashing midway causing the box to not boot at all. It's simple, download the tool I've attached to this post and use it to either flash or just boot the img if you don't wanna flash it to eMMC (Haven't tested the SD Boot function myself but it should work)
This website also helped me a ton: https://forum.armbian.com/topic/17597-csc-armbian-for-rk3318rk3328-tv-box-boards/
Click to expand...
Click to collapse
It says this is Android 9.0 here. https://romprovider.com/soudamini-hk1-cool-firmware-support/
Hi,
I know it's an old thread but i'm try'n to revive this box without success.
On board it's written 2G/16B tried 3318_9.0-TVBOX-Z4_1025.img firmware but restoration give me errors (see screenshot) would like to try 3318_9.0-TVBOX-Z2_0820.img firmware but didn't find it so if someone somewhere had this deep in his storage,please upload it again,it would be helpfull.
Regards
Hi i have used so many hours on this. If someone is interessted in recover this device back to stock firmware, here it is:
All the usefull links i have used:
Rockchip firmware update guide for Android TV-Box 2023
Tutorial to update, recover or unbrick with a firmware file our Android TV Box with SoC Rockchip RK3188, RK3368, RK3228, RK3229, RK3566...
androidpctv.com
Introduction — Firefly Wiki
RK3328-based firefly open source motherboard, has very powerful performance, USES a quad-core 64-bit processor Rochchip RK3328, and integrates 2.4g WIFI and bluetooth 4.2 module on the tiny motherboard, with usb2.0, usb3.0, hdmi, 1000M Ethernet, i2s and other diverse interfaces.
wiki.t-firefly.com
I have successfully restored my device back to Android 9.0. Using Driverassist 4.7 and RKdevTool v.2.58.
If anyone knows how to update the device to android 10 or higher WITHOUT bricking the device or some functions not working so please tell me.
Remember to give the device some time to startup after the firmware downloaded successfully.
caxhatq said:
I've found an Android 11 ROM for this box, works amazingly well compared to the A95X and the sluggish T9 Z5 ROM. Here is a link to it:
RK3318_DC_HK1_COOL_AP6330_11_20210522.1453.zip
drive.google.com
WIFI works, only the front panel and infrared remote does not work. By the way, I flashed this ROM with an SD card because the USB cable I made was wonky and stopped flashing midway causing the box to not boot at all. It's simple, download the tool I've attached to this post and use it to either flash or just boot the img if you don't wanna flash it to eMMC (Haven't tested the SD Boot function myself but it should work)
This website also helped me a ton: https://forum.armbian.com/topic/17597-csc-armbian-for-rk3318rk3328-tv-box-boards/
Click to expand...
Click to collapse
works perfectly I used still using the same Rom about months ago