blu D930L IMEI recovery - General Questions and Answers

s buenas tardes amigo DIos le bendiga grandemente, quisiera su ayuda para saber como recuperar el imei del blu dash D930L por que le hice la rom pero me aparece tambien imei fail
MOD EDIT: Please post only in English according to the FORUM RULES,translation added below:
S good afternoon friend Guys bless you greatly, I would like your help to know how to recover the imei of the dash blu D930L because I made you the rom but I also appear imei fail

1. Locate the original packaging for your mobile device.
2. Locate the barcode label stuck to your box. It might have been placed over the opening to act as a seal.
3. Look for the IMEI/MEID. It should be clearly labeled and is usually listed together with the barcode and serial number.

Related

my Lumia 710 reacts not

hello friends, I need your help. when trying to update my 710 Lumia update failed to disconnect the mobile and the pc, this has gone and I can not in any way you turn, it seems that is dead. I can do. thanks
Please describe what happens when you try to turn the phone on. Including a picture may help.
Also, feel free to include an untranslated version of your posts in your native language, so long as you also have an English translation. Some people may be able to help you better if they speak the same language.
cuando intento encender o conectar al pc el movil no hace nada, es como si estuviera muerto. de todas formas gracias por intentar ayudarme, ayer fui al sat express y me lo tienen que enviar al sat de nokia.
when I try to turn on or connect to pc the phone does not do anything, it's as if dead. anyway thanks for trying to help me, yesterday I went to express and I sat have to send to nokia sat
finalmente me han contestado del sat de nokia y no lo entiendo. me dicen que quemo la placa por entrar agua y no lo cubre la garantia, asi que me piden 87e por la reparacion. les he contestado diciendo que a mi nunca me cayo agua en el telefono. que puedo hacer. he puesto una queja en nokia support.
I finally have answered the nokia sat and do not understand. I say burn the plate into water and not covered under warranty, so I asked the repair 87e. I have replied saying that I never water fell on the phone. I can do. I put a complaint in nokia support.

please

tengo un rpoblema muy grande tengo el tactil invertido y ya nose que hacer y a sido a raiz de instalar la rom.he metido el codigo *#2663# y no me deja entrar .he reinstalado la rom de fabrica por odin y me sigue haciendio lo mismo y yo ya no se que hacer en mi s6 si alguien me puede ayuda se lo agradezco
I have a very large rpoblema have already invested touch and nose to do already been installed root rom.he put the code * # 2663 # and does not let me .he refitted rom manufactured by odin and what I still haciendio same and they no longer do in my s6 if anyone can help me I appreciate it
on some CSC dial codes work, on others not, if I understood the question correctly.
If *#2663# does not work, and you are rooted already, you can download Shortcut master from playstore and try to run the code with root permissions.
If that des not work, you can try flashing different region firmware, but like I said, codes don`t work with some region fw.

someone pass the copy of QCN please

I would appreciate very much if someone can pass your qcn please
maruchan123 said:
Empecé a hacer una copia de mi QCN pero es inútil que alguien pueda pasarlo pero si funciona, creo que muchos aquí lo agradecerían
Click to expand...
Click to collapse
If the backup finish successfully it will work good with us
i have found a solution for those who have lost imei after flashing or for those who want to change imei
here is the link to qcn file Enjoy i have removed my imei from it you can add yours by using this tool : https://mega.nz/file/LixWmY5T#ki4MXHtf0XKNovI7Iz3DQ8o2inrIPc3aTDgrwE_WpcI
QCN : https://mega.nz/file/yypwHQLC#96sIs97z_nkOSyn8U7U-1bRikrk1ipBDt2HFcXb1sLY
use the below guide to restore imei and everything you have lost : https://forum.xda-developers.com/t/guide-backup-edit-and-restore-qcn-fixing-lost-imei.4101611/

Change operator's Rom [Cambiar Rom de operador] HUAWEI P40 PRO

Mod edit:
Hello friends, I have been trying to change the operator Rom for several days to my huawei p40 pro ELS-N04 and so far nothing, and managed to install previous or higher Rom but I continue with all the operator, the method I have used is the dloan with usb otg, but I don't know what to do anymore because the operator Rom brings a lot of garbage, some help and also delays the updates
Hola amigos llevo varios días tratando de cambiar la Rom de operador a mi huawei p40 pro ELS-N04 y hasta al momento nada, e logrado instalar Rom anteriores o superiores pero sigo con todo lo de operador el método que he usado es el dloan con usb otg, pero ya no se que hacer lo malo que la Rom de operador trae mucha basura alguna ayuda y aparte atrasa las actualizaciones
Please remember to use English only on XDA​
Mod edit:
Operator apps are installed according to the sim you have on your mobile. An operator update is downloaded and that is the customization with all those apps. What I have done is to restart the factory without the sim so that it appears without customization. After configuring, disable automatic updates and if it offers you the carrier update, just don't install it.
Las apps de operador se instalan según la sim que tengas en tu movil. Se descarga una actualizacion de operador y esa es la personalizacion con todas esas apps. Lo que yo he hecho es reiniciar de fabrica sin la sim para que te aparezca sin personalización. despues de configurar, desactiva las actualizaciones automaticas y si te ofrece la actualizacion de operador, solo no la instales.
______________________________
Operator apps are installed according to the sim you have on your mobile. An operator update is downloaded and that is the customization with all those apps. What I have done is to restart the factory without the sim so that it appears without customization. After configuring, disable automatic updates and if it offers you the carrier update, just don't install it.
Please remember to use English only on XDA​
Mod edit:
Hello friend, I will tell you about the installation I have done without SIM and despite the app appears of course and the logo at the beginning and off of the cell is what I do not understand if when installing the ROM is to leave the cell to zero but in my case it is like to leave a company file of course
Hola amigo pues te comento la instalación la he realizado sin SIM y a pesar aparece las app de claro y el logo al inicio y apagado del cel es lo que no comprendo si al instalar la ROM es dejar el cel a cero pero en mi caso es como que dejara algún archivo de la compañía de claro
Please remember to use English only on XDA​

			
				
English only.
Adolfo15 said:
Hola amigos llevo varios días tratando de cambiar la Rom de operador a mi huawei p40 pro ELS-N04 y hasta al momento nada, e logrado instalar Rom anteriores o superiores pero sigo con todo lo de operador el método que he usado es el dloan con usb otg, pero ya no se que hacer lo malo que la Rom de operador trae mucha basura alguna ayuda y aparte atrasa las actualizaciones
Click to expand...
Click to collapse
"Amigo" learn some English and then come and write on a english forum or at least have the decency to go and translate what you want to ask us on google translate. You don't have to speak academic level English here but follow the rules and respect the other members they will surely understand what are you asking them even if it's translated on google. Just imagine how will XDA look like if everyone writes in his native language.
VD171 said:
English only.
Click to expand...
Click to collapse
Agreed and posts adjusted. Let us know if this continues so further action can be taken
Adolfo15 said:
Mod edit:
Hello friends, I have been trying to change the operator Rom for several days to my huawei p40 pro ELS-N04 and so far nothing, and managed to install previous or higher Rom but I continue with all the operator, the method I have used is the dloan with usb otg, but I don't know what to do anymore because the operator Rom brings a lot of garbage, some help and also delays the updates
Hola amigos llevo varios días tratando de cambiar la Rom de operador a mi huawei p40 pro ELS-N04 y hasta al momento nada, e logrado instalar Rom anteriores o superiores pero sigo con todo lo de operador el método que he usado es el dloan con usb otg, pero ya no se que hacer lo malo que la Rom de operador trae mucha basura alguna ayuda y aparte atrasa las actualizaciones
Please remember to use English only on XDA​
Click to expand...
Click to collapse
Send me a message on:
{Mod edit}
You need a rebrand to global version C605 Latam or C432 EU.
Nick said:
Send me a message on:
{Mod edit}
You need a rebrand to global version C605 Latam or C432 EU.
Click to expand...
Click to collapse
@Nick I've removed the social media references from your post.
As an excemption from the last bullet of rule no. 5 of the XDA Forum Rules, we grant only developers to provide links to their social media in their own development threads. These conditions obviously don't apply to your post or you.
Device Forum Rules (Please Read before Posting)
In this thread, we will provide a short Q&A for your stay on this forum. Please read thoroughly and act accordingly. While most that is needed to know is pointed out in the Forum Rules, history shows that some points of these rules are not...
forum.xda-developers.com
I'd appreciate if you don't drag our XDA members to your social media but that you provide your various services and solutions here on XDA!
Regards
Oswald Boelcke
Senior Moderator

Question Problems with VolTe and Fingerprint Reader, not working even when changing regions

Good afternoon! Greetings from Mexico! A few days ago I bought a Realme GT Neo 2, I currently live in Mexico and use a company called "Bait" from Altan Redes (which uses band 28), this information will help me to explain and comment on a question that I have AND I CANNOT SOLVE.
According to the Realme website, my phone is the "realme GT NeoFR(12+256)" version; what I suppose is from France and therefore a version of Europe, so far everything is fine, right?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, not because according to the manufacturer's specifications, this super cell phone supports VolTE and supports band 28; when inserting the sim that I have in a OnePlus 5 from the Mexican company Bait with the hope that the VolTE will be activated and I can receive calls or dial, something that for 10 days I tried in a thousand ways and I could never activate said service, call operated and they told me the following "Your equipment is not approved to work with our network" pfffffff!!, and it is curious that said activation option does not appear in the settings.
How do I "half" solve this problem, since it is a dual sim, buy and enter another "BAIT" sim with activated data and use my previous "BAIT" sim, degrading the signal to 2g so that calls can come in and out.
So far I would like to know if anyone has a solution to this problem or has had the same problem that I face.
After reading here on XDA I did the following:
Firstly, the equipment came with the firmware RMX3370_11_A.03; and when reading in detail in the forum I realized that if we use a VPN it is likely that it will release an update to be able to unlock the bootloader and be able to flash the phone and change the region (with this flashing I thought that it could activate the volte or some functions different to be able to use my phone with the "BAIT" operator).
For this first Update I used the psiphon Pro application and the country of France.
https://psiphon.ca/es/download.html
After trying a vpn and a lot of patience the phone first received the RMX3370_11_A.05 update.
After a few days I kept trying to upload the version of the phone and simply with the vpn for hours and connected to WIFI I did not receive anything, that is why I thought what if I change the country when using the VPN? and bingo I was able to update to the RMX3370_11_A.06 version for this case I used the same application but using the vpn of the country of Bulgaria.
With this update it was first possible for me to unlock the booloader following in detail the tutorial of the brother @RMX3370 (thanks for the tutorials)
https://forum.xda-developers.com/t/...2-rmx3370-all-variants.4391679/#post-86396489
Once the bootloader is unlocked install TWRP and Magisk to root the phone; again following in detail the tutorial of the brother @RMX3370
https://forum.xda-developers.com/t/rooting-realme-gt-neo-2-rmx3370-all-models-with-magisk.4392005/
After this process and with the unlocked bootloader flashie and change regions through Europe, India Latam etc.... NOTHING OR ANY version of firmware activated the VolTE.
For flashing, follow in detail the following tutorial from brother @SrCDA:
https://forum.xda-developers.com/t/...ion-relockbootloader-realme-gt-neo-2.4399223/
All this process BooLoader unlocking, flashing, firmware installation (region changes) was done under MacOS BigSur without problems; That's why I tell you to follow all the guides in detail since I see that sometimes they ask many things recursively when the same authors of the guides solve them in the publications.
After trying and trying to get the VolTE to work I have resigned myself to staying in the INDIA region and I am already using the phone for daily use; only now there is another problem THE FINGERPRINT READER DOES NOT WORK, I have tried to put my fingerprints and it is really annoying to unlock it with a code; I have disabled magisk's biometric authentication BUT IT HAS NOT SOLVED ANYTHING.
I've changed the android calling app to avoid the "This call is being recorded" announcement, and uninstalled apps that slow down the phone to leave the stock rom as clean as possible.
It is a fast phone, well configured and I really like it; but I list my problems again:
- There is no VolTE for band 28 of Mexico
- Issue with fingerprint reader shaking when trying to add them to unlock the phone.
Note: if any user requires that I support him in something with all pleasure!; If anyone can ask for my listed problems or faced the same thing and managed to fix them, I would really appreciate some tips to finish configuring my phone!
Thank you very much for reading and for your kind attention, greetings from Mexico!
makuaz said:
Good afternoon! Greetings from Mexico! A few days ago I bought a Realme GT Neo 2, I currently live in Mexico and use a company called "Bait" from Altan Redes (which uses band 28), this information will help me to explain and comment on a question that I have AND I CANNOT SOLVE.
According to the Realme website, my phone is the "realme GT NeoFR(12+256)" version; what I suppose is from France and therefore a version of Europe, so far everything is fine, right?
View attachment 5537279
Well, not because according to the manufacturer's specifications, this super cell phone supports VolTE and supports band 28; when inserting the sim that I have in a OnePlus 5 from the Mexican company Bait with the hope that the VolTE will be activated and I can receive calls or dial, something that for 10 days I tried in a thousand ways and I could never activate said service, call operated and they told me the following "Your equipment is not approved to work with our network" pfffffff!!, and it is curious that said activation option does not appear in the settings.
View attachment 5537291
View attachment 5537281
View attachment 5537283
View attachment 5537285
How do I "half" solve this problem, since it is a dual sim, buy and enter another "BAIT" sim with activated data and use my previous "BAIT" sim, degrading the signal to 2g so that calls can come in and out.
View attachment 5537289
So far I would like to know if anyone has a solution to this problem or has had the same problem that I face.
After reading here on XDA I did the following:
Firstly, the equipment came with the firmware RMX3370_11_A.03; and when reading in detail in the forum I realized that if we use a VPN it is likely that it will release an update to be able to unlock the bootloader and be able to flash the phone and change the region (with this flashing I thought that it could activate the volte or some functions different to be able to use my phone with the "BAIT" operator).
For this first Update I used the psiphon Pro application and the country of France.
View attachment 5537293
https://psiphon.ca/es/download.html
After trying a vpn and a lot of patience the phone first received the RMX3370_11_A.05 update.
After a few days I kept trying to upload the version of the phone and simply with the vpn for hours and connected to WIFI I did not receive anything, that is why I thought what if I change the country when using the VPN? and bingo I was able to update to the RMX3370_11_A.06 version for this case I used the same application but using the vpn of the country of Bulgaria.
With this update it was first possible for me to unlock the booloader following in detail the tutorial of the brother @RMX3370 (thanks for the tutorials)
https://forum.xda-developers.com/t/...2-rmx3370-all-variants.4391679/#post-86396489
Once the bootloader is unlocked install TWRP and Magisk to root the phone; again following in detail the tutorial of the brother @RMX3370
https://forum.xda-developers.com/t/rooting-realme-gt-neo-2-rmx3370-all-models-with-magisk.4392005/
After this process and with the unlocked bootloader flashie and change regions through Europe, India Latam etc.... NOTHING OR ANY version of firmware activated the VolTE.
For flashing, follow in detail the following tutorial from brother @SrCDA:
https://forum.xda-developers.com/t/...ion-relockbootloader-realme-gt-neo-2.4399223/
All this process BooLoader unlocking, flashing, firmware installation (region changes) was done under MacOS BigSur without problems; That's why I tell you to follow all the guides in detail since I see that sometimes they ask many things recursively when the same authors of the guides solve them in the publications.
After trying and trying to get the VolTE to work I have resigned myself to staying in the INDIA region and I am already using the phone for daily use; only now there is another problem THE FINGERPRINT READER DOES NOT WORK, I have tried to put my fingerprints and it is really annoying to unlock it with a code; I have disabled magisk's biometric authentication BUT IT HAS NOT SOLVED ANYTHING.
I've changed the android calling app to avoid the "This call is being recorded" announcement, and uninstalled apps that slow down the phone to leave the stock rom as clean as possible.
It is a fast phone, well configured and I really like it; but I list my problems again:
- There is no VolTE for band 28 of Mexico
- Issue with fingerprint reader shaking when trying to add them to unlock the phone.
Note: if any user requires that I support him in something with all pleasure!; If anyone can ask for my listed problems or faced the same thing and managed to fix them, I would really appreciate some tips to finish configuring my phone!
View attachment 5537299
Thank you very much for reading and for your kind attention, greetings from Mexico!
Click to expand...
Click to collapse
Hello, facing same issue, no VOLTE in settings, tried flash europe and china roms, VOLTE still not there, so you are not only one
joksax said:
Hello, facing same issue, no VOLTE in settings, tried flash europe and china roms, VOLTE still not there, so you are not only one
Click to expand...
Click to collapse
hello! Good morning, greetings from Mexico, it's good to know that at least I'm not the only one with the problem of activating VolTE, thanks for responding, comrade! Hey can I ask you if you have problems with fingerprint unlocking?
makuaz said:
hello! Good morning, greetings from Mexico, it's good to know that at least I'm not the only one with the problem of activating VolTE, thanks for responding, comrade! Hey can I ask you if you have problems with fingerprint unlocking?
Click to expand...
Click to collapse
nope, fingerprint unlocking works perfectly for me
mine also came with the version rmx3370_11_a.03 I'm trying to update but I can't, even with vpn and changing regions I can't, is there anything else I can do? I couldn't find it in the Ota file to install
Arkynne said:
mine also came with the version rmx3370_11_a.03 I'm trying to update but I can't, even with vpn and changing regions I can't, is there anything else I can do? I couldn't find it in the Ota file to install
Click to expand...
Click to collapse
rmx3370_11_a.03 ? Where did you buy your GT Neo2 from ?
axialcecal said:
rmx3370_11_a.03 ? Where did you buy your GT Neo2 from ?
Click to expand...
Click to collapse
I live in Brazil, so I imported through Aliexpress
Arkynne said:
I live in Brazil, so I imported through Aliexpress
Click to expand...
Click to collapse
Ah yes, Aliexpress, that explains the strange version it came with -- Is there no way to flash a.06 using EDL?
axialcecal said:
Ah yes, Aliexpress, that explains the strange version it came with -- Is there no way to flash a.06 using EDL?
Click to expand...
Click to collapse
I already did a search, I found the version rmx3370_11_a.06, but the instructions themselves I didn't understand very well. I tried to do it in OTA, but I couldn't find the file. I can even try to do it in EDL, but this is not considered root? Apart from that I came to look for update patches after the wi-fi gives problems of not finding the network, being that other cell phones are connected to the wifi network
Arkynne said:
I already did a search, I found the version rmx3370_11_a.06, but the instructions themselves I didn't understand very well. I tried to do it in OTA, but I couldn't find the file. I can even try to do it in EDL, but this is not considered root? Apart from that I came to look for update patches after the wi-fi gives problems of not finding the network, being that other cell phones are connected to the wifi network
Click to expand...
Click to collapse
I just got the phone myself so I haven't started with modifications or unlocking bootloader but considering its a SD 870 I would assume it might be similar to a Oneplus 7 Pro EDL procedure which requires a different button combo and different USB drivers from Qualcomm. The page I found here seems to show similar steps https://realmefirmware.com/how-to-flash/ and the download for global a.06 and india 1.07 [https://realmefirmware.com/realme-gt-neo2-5g-firmware/]
But I won't be doing that yet but from my own experiences on other phones it looks like the right path. Lots of people in other threads are mentioning inconsistent functionality so there might be more to it too. I guess it might be beneficial to keep watching and waiting.
My phone is from Banggood I'm on a.06 from purchase. I am in Australia.
I understand, well I even thought about buying from Bangood, but I didn't have it in green, lol, apparently it's the right way, but MSM doesn't accept my login credentials.Even if I were to do it now, I wouldn't notice, and even because I have to back up all the files, Irati get my old cell phone for this and format this one and try to do it. I hope to keep in touch with you, as you seem to be experienced
Arkynne said:
I understand, well I even thought about buying from Bangood, but I didn't have it in green, lol, apparently it's the right way, but MSM doesn't accept my login credentials.Even if I were to do it now, I wouldn't notice, and even because I have to back up all the files, Irati get my old cell phone for this and format this one and try to do it. I hope to keep in touch with you, as you seem to be experienced
Click to expand...
Click to collapse
Even a Poco F3 has a similar method, however instead of Qualcomm EDL Mode, it uses a similar but branded Xiaomi tool and within Fastboot Mode to flash the device.
I'll be reading up on Stock flash methods for myself before I get to a stage where I unlock bootloader and root.
axialcecal said:
Even a Poco F3 has a similar method, however instead of Qualcomm EDL Mode, it uses a similar but branded Xiaomi tool and within Fastboot Mode to flash the device.
I'll be reading up on Stock flash methods for myself before I get to a stage where I unlock bootloader and root.
Click to expand...
Click to collapse
I researched, I really saw that it is a tool for xiaomi, the same and for realme/oppo, can you give me a contact so we can talk better? like telegram?
Arkynne said:
I researched, I really saw that it is a tool for xiaomi, the same and for realme/oppo, can you give me a contact so we can talk better? like telegram?
Click to expand...
Click to collapse
Wouldn't be the same no, as Xiaomi's tool only supports a fastboot type package.
PM Sent
Hi, I bought this phone 3 days ago (with no volte option) and Im also with BAIT. The thing I did is to download Vozapp, so far I can receive phone calls without any issue. When the phone stay along time without usage (like going bed) you may need to wake it up again (just double tap to wake the screen) so the app resume receiving calls.
makuaz said:
¡Buena tarde! ¡Saludos desde México! Hace unos dias compre un Realme GT Neo 2, actualmente vivo en Mexico y uso una empresa que se llama "Bait" de Altan Redes (que usa la banda 28), esta informacion me ayudara a explicar y comentar una duda que tengo Y NO PUEDO RESOLVER.
Según el sitio web de Realme, mi teléfono es la versión "realme GT NeoFR (12+256)"; lo que supongo es de francia y por lo tanto una version de europa, hasta aqui todo bien no?
View attachment 5537279
Pues no porque según las especificaciones del fabricante, este súper celular soporta VolTE y soporta banda 28; al insertar la sim que tengo en un OnePlus 5 de la empresa mexicana Bait con la esperanza de que se active el VolTE y pueda recibir llamadas o marcar, algo que durante 10 días probé de mil maneras y nunca pude activar dijo servicio, llame operado y me dijeron lo siguiente "Tu equipo no esta homologado para trabajar con nuestra red" pfffffff!!, y es curioso que en los ajustes no aparece dicha opcion de activacion.
View attachment 5537291
View attachment 5537281
View attachment 5537283
View attachment 5537285
Como soluciono "a medias" este problema, ya que es dual sim, compro e ingreso otra sim "BAIT" con datos activados y uso mi anterior sim "BAIT", degradando la señal a 2g para que puedan entrar y salir llamadas .
View attachment 5537289
Hasta el momento me gustaria saber si alguien tiene solucion a este problema o ha tenido el mismo problema que yo enfrento.
Después de leer aquí en XDA hice lo siguiente:
En primer lugar, el equipo venía con el firmware RMX3370_11_A.03; y al leer en detalle en el foro me di cuenta que si usamos VPN es probable que lance una actualización para poder desbloquear el bootloader y poder flashear el teléfono y cambiar de región (con este flasheo pensé que podría activar el volte o algunas funciones diferentes para poder usar mi teléfono con el operador "BAIT").
Para esta primera actualización utilicé la aplicación psiphon Pro y el país de Francia.
View attachment 5537293
https://psiphon.ca/es/download.html
Después de probar una vpn y mucha paciencia, el teléfono recibió por primera vez la actualización RMX3370_11_A.05.
Después de unos días seguí intentando subir la versión del teléfono y simplemente con el vpn durante horas y conectado a WIFI no recibí nada, por eso pensé ¿y si cambio de país al usar el VPN? y bingo pude actualizar a la versión RMX3370_11_A.06 para este caso usé la misma aplicación pero usando el vpn del país de Bulgaria.
Con esta actualización primero me fue posible desbloquear el booloader siguiendo en detalle el tutorial del hermano @RMX3370 (gracias por los tutoriales)
https://forum.xda-developers.com/t/...2-rmx3370-all-variants.4391679/#post-86396489
Una vez que el cargador de arranque esté desbloqueado, instale TWRP y Magisk para rootear el teléfono; nuevamente siguiendo en detalle el tutorial del hermano @RMX3370
https://forum.xda-developers.com/t/rooting-realme-gt-neo-2-rmx3370-all-models-with-magisk.4392005/
Despues de este proceso y con el bootloader desbloqueado flashie y cambio de regiones por Europa, India Latam etc.... NADA NI NINGUNA version de firmware activaba el VolTE.
Para flashear, siga en detalle el siguiente tutorial del hermano @SrCDA :
https://forum.xda-developers.com/t/...ion-relockbootloader-realme-gt-neo-2.4399223/
Todo este proceso de desbloqueo, flasheo, instalación de firmware (cambios de región) de BooLoader se realizó bajo MacOS BigSur sin problemas; Por eso les digo que sigan todas las guías al detalle ya que veo que a veces preguntan muchas cosas recursivamente cuando los mismos autores de las guías las resuelven en las publicaciones.
Después de intentar e intentar que funcione el VolTE me he resignado a quedarme en la región INDIA y ya estoy usando el teléfono para uso diario; solo que ahora hay otro problema EL LECTOR DE HUELLAS DACTILARES NO FUNCIONA, he intentado poner mis huellas dactilares y es realmente molesto desbloquearlo con un código; He desactivado la autenticación biométrica de magisk PERO NO HA SOLUCIONADO NADA.
Cambié la aplicación de llamadas de Android para evitar el anuncio "Esta llamada se está grabando" y desinstalé las aplicaciones que ralentizan el teléfono para dejar la ROM original lo más limpia posible.
Es un teléfono rápido, bien configurado y me gusta mucho; pero enumero mis problemas de nuevo:
- No hay VolTE para la banda 28 de México
- Problema con el temblor del lector de huellas dactilares al intentar agregarlas para desbloquear el teléfono.
Nota: si algún usuario requiere que lo apoye en algo con todo gusto!; Si alguien puede preguntar por los problemas enumerados o se enfrentó a lo mismo y logró solucionarlos, ¡realmente agradecería algunos consejos para terminar de configurar mi teléfono!
View attachment 5537299
Muchas gracias por leerme y por su amable atención, saludos desde México!
Click to expand...
Click to collapse
H, también soy de México y sigo con la RMX3370_11_A.03 cuál es el proceso que seguiste, cuánto tiempo usaste la vpn..? Las he usado y no descarga nada... También quiero saber dónde checaste tu versión donde dice que es de Francia...
H, I am also from Mexico and I continue with the RMX3370_11_A.03, what is the process you followed, how long did you use the vpn? I've used them and it doesn't download anything... I also want to know where you checked your version where it says it's from France...
Arkynne said:
I understand, well I even thought about buying from Bangood, but I didn't have it in green, lol, apparently it's the right way, but MSM doesn't accept my login credentials.Even if I were to do it now, I wouldn't notice, and even because I have to back up all the files, Irati get my old cell phone for this and format this one and try to do it. I hope to keep in touch with you, as you seem to be experienced
Click to expand...
Click to collapse
As far as I know MSM is paid brother, better use the tutorial described above since I currently managed to update (first Flashing to RMX3370_11_A.07 (Indian region) and I got the RMX3370_11_A.08 update
imR1ch said:
Hi, I bought this phone 3 days ago (with no volte option) and Im also with BAIT. The thing I did is to download Vozapp, so far I can receive phone calls without any issue. When the phone stay along time without usage (like going bed) you may need to wake it up again (just double tap to wake the screen) so the app resume receiving calls.
Click to expand...
Click to collapse
ok brother I understand, I don't use voice app better buy another bait sim and with that I have activated 4G and my main sim (also bait), what I was able to investigate with a friend who works at Altan Redes IS THAT THE VOLTE FOR CALLS WILL NEVER WORK ON THIS PHONE UNTIL REALME OR ANY MEXICAN TELEPHONE COMPANY SELL IT IN THEIR OFFICIAL STORES SO THAT THE TAXES ARE PAID AND IT CAN BE APPROVED
Gamas1. said:
H, también soy de México y sigo con la RMX3370_11_A.03 cuál es el proceso que seguiste, cuánto tiempo usaste la vpn..? Las he usado y no descarga nada... También quiero saber dónde checaste tu versión donde dice que es de Francia...
Click to expand...
Click to collapse
Hello brother, a pleasure! I recommend you try to flash it yourself to upload the firmware, when my phone arrived it had the same RMX3370_11_A.03 and it uploaded by itself without vpn or anything to RMX3370_11_A.05, from there I unlocked the bootloader and I was able to flash it by trying different regions, India, CN, Global etc...
makuaz said:
ok brother I understand, I don't use voice app better buy another bait sim and with that I have activated 4G and my main sim (also bait), what I was able to investigate with a friend who works at Altan Redes IS THAT THE VOLTE FOR CALLS WILL NEVER WORK ON THIS PHONE UNTIL REALME OR ANY MEXICAN TELEPHONE COMPANY SELL IT IN THEIR OFFICIAL STORES SO THAT THE TAXES ARE PAID AND IT CAN BE APPROVED
Click to expand...
Click to collapse
Well my I can do and receive calls at any moment, you should install it and give it try. VozApp

Categories

Resources