Database Info

[Stock Rom][VoLTE]CoolUI 8.0 Marshmallow [SP & TWRP flashable]

Hello Guys
CoolUI 8.0 based on Marshmallow For Coolpad Note 3 Lite
==========Features=========
*VOLTE
*CoolManager
*User Interference Changed
*Notification Drawer now is below
*Improved the Battery Life
Fixed Issues in Version 10:-
Charging Take 3 hours To Full Charge For Me
Fingerprint Response Little Bits Improve
Memo fixed
Recorder fixed
MALWARE PROBLEM SOLVED
Folder Rename Font Now Visable
Display Improved
VOLTE supported
Front Camera turns blank occasionally.
Cool Manager App Hang.
Loud Speaker is much improved.
Fingerprint response time.
Hanging and Lagging
Camera Effects
Multi-Tasking added
Fingerprint to capture fixed
Loudspeaker problem fixed
Known Issues:
Charging is slow
Discharging is quick when battery is less than 15(Our Kernel issue)
DOWNLOADS:-
SP Flash Tool Flashable :-
( just load the Scatter File , click Download & Switch Device and connect to PC )
V10 - SP Flashable CoolUI 8
Custom Recovery Flashable(Rooted):-
V4 - TWRP Flashable - CoolUI 8
SuperSU-systemless ( Root ):-
https://mega.nz/#!dpogBIiK!hCv4Oaji9K1Kh8JvhE5cZFy1BonRO4HCMm3e8hpvksY
==>How to update to V10 through TWRP Recovery??
If you are on Lollipop flash coolUI8 V4 through TWRP.
You must be on CoolUi MM for example V4 to do this
Download SP Flashable Version 10 of CoolUI 8
Extract it
You only need System.img and Boot.img
Now, Boot to TWRP
Install, Locate where you extracted System.img and Boot.img
Click on Install Image
Now select System.img > select System Partition.
Now Select Boot.img > select boot partition
Done.
Now main thing flash SuperSU-systemless zip
Reboot to System.
Q2)How to Unroot CoolUI 8??
A2)Just do a Factory Reset and now Root is gone.
Q3)How to make it Factory Software if i have TWRP and it is rooted??
A3) Factory Reset to unroot and Flash Stock Recovery and again do a Factory Reset.
Fix Charging , Power / Volume button issues :
https://forum.xda-developers.com/an...une-button-t3600688/post72145424#post72145424
Credits:-
Team Innovative (For TWRP flashable)
Coolpad
@kubersharma
Source:-
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=5531&extra=page=1&mobile=2
http://www.coolpadforums.com/forum.php?mod=viewthread&tid=12702&extra=page=1&mobile=2
Thank YOU.
Do hit the Thanks Button

Screenshots CoolUI 8 Marshmallow

Can I Flash it in Coolpad note 3 instead of note 3 lite?.

thegodhimself-sukumar said:
Can I Flash it in Coolpad note 3 instead of note 3 lite?.
Click to expand...
Click to collapse
Nope

in coolpad note 5 when i video call receiver could not see me insted they get green blocked screen but i can see them .HOW TO SOLVE THE PROBLEM PLZ HELP ME. i think the update stock ROM reason for it. now i have using coolui8.0 v031

VoLte not working
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help

Chirag CM said:
I installed this Rom expecting to get volte but I am unable to make calls through my Jio sim. Please can u provide some help
Click to expand...
Click to collapse
Please flash V10 for VoLTE

kuberrocks96 said:
Please flash V10 for VoLTE
Click to expand...
Click to collapse
Is coolpad have an feature captured video when someone tried to unlocked our phone?

I am not able to install system and boot images of v10. I was successfully upgraded to marshmallow v4. But whenever I am trying to install image files specifically, I am getting invalid file or file does not exist error. Please suggest.

Super-SU Systemless Zip not working! Any other link for the same?

Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4

Where is download link for rom

I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!

I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?

Thejas tj said:
Guys I recently bricked my phone and I flashed an older version(build no says v002).
After flashing via spflash the phone did came back to life but when power off or reboot,
very often it gets stuck in boot loop to recovery mode only(but when in recovery mode, there's no recovery there's busted Android symbol with a exclamation mark).
What I wanted to know is if I flash this rom via spflash will there be issue of the phone booting into recovery and possibly fix the no busted Android issue?
And does vote work well with this rom?
And spflashable says v10 but tarp says v4
Click to expand...
Click to collapse
Yes, VoLTE works.
Please flash V10 via SP Tool
$Jarial said:
I recently flashed this ROM with SP tool, after boot I'm facing a problem: location app asking for permission, therefore, i provided all permission but still the app pop every time and ask for permissions. Please help!
Click to expand...
Click to collapse
FLASH V10 VIA SP FLASH TOOL
vedraj1012$ said:
I installed it in clpdn3 lite everything is working smoothly. Suddenly the speaker and earphone jack stopped working. Please help. How to solve this?
Click to expand...
Click to collapse
FLASH V10 VIA SP TOOL

Battery
When the phone gets lock it directly entered to super power saving mode. It loses more of the power

Flashing interrupted due to Error 7.
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?

KiLLeR_PvK said:
I got an issue of Error 7 while flashing Stock mm v04 from Twrp. I've tried the suggested method of erasing "Asserts" by editing Updater through notepad++ but i didnt really see any asserts lines in this file. So what do i do? Or is there any way i can flash MM v10 without flashing v04 first? I need some urgent help my phone aint working.
P.S: I've flashed Mados before this as i didnt know we have to flash stock MM before flashing naugat. Is there any chance i got this problem cause of this?
Click to expand...
Click to collapse
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma

Thanks!
kubersharma said:
MAD TWRP doesn't support to flash any other roms.
Use this : https://androidfilehost.com/?fid=745425885120733720 ( it is 3.1.0-1 )
3.1.0 has old mount points - for old roms
3.1.1 has new mount points - for new roms
Also, AFH is little slow to generate mirrors - wait for it.
With regards
Kubersharma
Click to expand...
Click to collapse
Thank you for the response! This link has worked and everything is set up now.

so is this project abandoned? any clues of further development?

Note5 Pro Indian Version Stock ROM Not updating OTA, Says something went wrong

Hi All
I am on MIUI 10.3.1 Stock ROM and Recovery. I can download update, but when it is about to update, says something went wrong.
I tried to download the update zip file and tried to update using choose package, the same error.
I must tell you that in order to enable Camera2 API, I had installed TWRP_ZCX recovery temporarily and had flashed HAL3_Enable_MIUI_PIE a month before.
I am sure this error might have something to do with that recovery. Any help?
Will installing a stock recovery sort the error? If yes, where do I get it? But more importantly, will I lose all my data?

Download full recovery package and install

SunilSuni said:
Download full recovery package and install
Click to expand...
Click to collapse
Can you please explain slightly in detail? and Will I lose existing data?
My bootloader is unlocked

Download full recovery package and install

SunilSuni said:
Download full recovery package and install
Click to expand...
Click to collapse
I have got that far, any additional info like where do I get full recovery package etc would be much appreciated..

vu2pmc said:
I have got that far, any additional info like where do I get full recovery package etc would be much appreciated..
Click to expand...
Click to collapse
Mi community website
Download link for 10.3.2
http://bigota.d.miui.com/V10.3.2.0.PEIMIXM/miui_HMNote5Global_V10.3.2.0.PEIMIXM_7d750f3322_9.0.zip

SunilSuni said:
Mi community website
Download link for 10.3.2
http://bigota.d.miui.com/V10.3.2.0.PEIMIXM/miui_HMNote5Global_V10.3.2.0.PEIMIXM_7d750f3322_9.0.zip
Click to expand...
Click to collapse
Hi Sunil,
I tried this zip file in two ways, one is by using the system update and choosing package. It gave me the same error.
So i tried to use this file for Mi Flash tool, but says flash script not found.
Any more advice?

vu2pmc said:
Hi Sunil,
I tried this zip file in two ways, one is by using the system update and choosing package. It gave me the same error.
So i tried to use this file for Mi Flash tool, but says flash script not found.
Any more advice?
Click to expand...
Click to collapse
What's your device model ? Is it whyred or Vince ?? Doest it have dual camera or single camera ??
You need fastboot ROM package to flash in Mi Flash Tool
Link for fastboot ROM : http://bigota.d.miui.com/V10.3.2.0....XM_20190808.0000.00_9.0_global_3e234be300.tgz
ROM link shared here is for Redmi Note 5 Pro/Global

SunilSuni said:
What's your device model ? Is it whyred or Vince ?? Doest it have dual camera or single camera ??
You need fastboot ROM package to flash in Mi Flash Tool
Link for fastboot ROM : http://bigota.d.miui.com/V10.3.2.0....XM_20190808.0000.00_9.0_global_3e234be300.tgz
ROM link shared here is for Redmi Note 5 Pro/Global[/QUOTE
My device is an India version of Note 5 pro.
It's a dual camera version.
Model name mentioned is ME17S.
I'm downloading the fastboot Rom from the link you've mentioned..
I've the MIFLASH tool, now trying to see how I can keep my data intact..I got a few banking apps...
Click to expand...
Click to collapse

Hello,i think this is funny becquse igot the same error. But,I have locked bootloader no root, i was thinking about enabling camera2api ,but not tried it. Only flashed (via updater app) recovery roms (also tried dev. Versions of roms) , and in each rom version is the same error. So my OTA dont work anymore. Last update i must downloaded manually. Somthing ,somewhere is wrong.
Btw: (whyred global version phone,in EU)

Well, 10.3.2 fastboot also didnt flash properly. So I tried 10.3.1 Fastboot files using MI flash tool, after 10.3.1 zip file also failed. And 10.3.1 fastboot file flashed successfully and then it updated normally to 10.3.2. Guess my recovery image was corrupted for some reason.

can we flash poco x2 rom to unlocked redmi k30 via mi flash tool? need some help guys

hello. i want to convert my redmi k30 to poco x2 . my redmi k30 is currently bootloader unlocked.. can i flash poco x2 rom in it via mi flash tool ? is it safe? i mean ,any chance of accidental bootloader relock and bricking.? i will ofcourse select 'clean all and flash ' . is there any script to be modified for pheonix ? thanks in advance

Why would you want to do that? Is there any benefit? Just curious since as far as I know convert to Poco X2 the phone will lose NFC and gain nothing.

Never_Sm1le said:
Why would you want to do that? Is there any benefit? Just curious since as far as I know convert to Poco X2 the phone will lose NFC and gain nothing.
Click to expand...
Click to collapse
because sir, i live in bangladesh and i need google services to properly sync my contacts etc. in china roms, the google services doesnot work correctly , but it is very fast and smooth..i also flashed miui 11 stable EU roms. but those were not as smooth as china roms plus, lags and hiccups occur here and there.. so now i want to convert perfectly to poco x2 rom via mi flash. is it safe sir?

arifn82 said:
because sir, i live in bangladesh and i need google services to properly sync my contacts etc. in china roms, the google services doesnot work correctly , but it is very fast and smooth..i also flashed miui 11 stable EU roms. but those were not as smooth as china roms plus, lags and hiccups occur here and there.. so now i want to convert perfectly to poco x2 rom via mi flash. is it safe sir?
Click to expand...
Click to collapse
I think it's should be ok but I have used xiaomi EU 12 and notice no lags and hiccups at all. Or you could try an AOSP rom with Gapps like Havoc or MSM Xtended, this is much safer than trying to convert from 1 model to another.

Never_Sm1le said:
I think it's should be ok but I have used xiaomi EU 12 and notice no lags and hiccups at all. Or you could try an AOSP rom with Gapps like Havoc or MSM Xtended, this is much safer than trying to convert from 1 model to another.
Click to expand...
Click to collapse
flashed poco x2's (12.0.1) via latest TWRP and everything is fantastic.... just missing the notification LED....plz poco team, bring it back !

arifn82 said:
flashed poco x2's (12.0.1) via latest TWRP and everything is fantastic.... just missing the notification LED....plz poco team, bring it back !
Click to expand...
Click to collapse
how did you do it, i tried flashing x2 12.0.1 but i'm getting error in the twrp.

bongski09 said:
how did you do it, i tried flashing x2 12.0.1 but i'm getting error in the twrp.
Click to expand...
Click to collapse
edit the script from phoenixin to phoenix

arifn82 said:
edit the script from phoenixin to phoenix
Click to expand...
Click to collapse
How to do it.?

Hi Arif,
I am also from Bangladesh and I have Redmi K30 4G.I also Want to flash Poco X2 rom. But How to Do that?? Can you guide me through this process??? Kindly Give me you Facebook ID or Any Other Direct contact information.
My Facebook Profile URL:- facebook.com/imTheMehrab

imTheMehrab said:
Hi Arif,
I am also from Bangladesh and I have Redmi K30 4G.I also Want to flash Poco X2 rom. But How to Do that?? Can you guide me through this process??? Kindly Give me you Facebook ID or Any Other Direct contact information.
My Facebook Profile URL:- facebook.com/imTheMehrab
Click to expand...
Click to collapse
first of all, do it at your own risk.!!! have the latest twrp installed. get the twrp flashable indian stable rom zip downloaded. extract the zip file> META-INF>com>google>android>updater-script . open this updater script with notepad and edit the product name of first two lines from 'PHOENIXIN' to "PHOENIX" .do it for every PHOENIXIN ,for first two lines only. thats it. save the file and repack the zip again and flash.

arifn82 said:
first of all, do it at your own risk.!!! have the latest twrp installed. get the twrp flashable indian stable rom zip downloaded. extract the zip file> META-INF>com>google>android>updater-script . open this updater script with notepad and edit the product name of first two lines from 'PHOENIXIN' to "PHOENIX" .do it for every PHOENIXIN ,for first two lines only. thats it. save the file and repack the zip again and flash.
Click to expand...
Click to collapse
Can I Make this as a Fastboot File and Flash my Full rom with MI flash Tool ??? i mean i wanna do this like fastboot rom do.is it possible ??

imTheMehrab said:
Can I Make this as a Fastboot File and Flash my Full rom with MI flash Tool ??? i mean i wanna do this like fastboot rom do.is it possible ??
Click to expand...
Click to collapse
actually, i dont know much about mi flash tool or fastboot rom flashing. its dangerous and confusing. TWRP flashable zips are fully safe and easy ! as far as i know, you can only edit the flashable zip's script. mi flash tool method doesnot allow script editing as far as i know. better you make a post yourself at QnA ..thanks....

arifn82 said:
first of all, do it at your own risk.!!! have the latest twrp installed. get the twrp flashable indian stable rom zip downloaded. extract the zip file> META-INF>com>google>android>updater-script . open this updater script with notepad and edit the product name of first two lines from 'PHOENIXIN' to "PHOENIX" .do it for every PHOENIXIN ,for first two lines only. thats it. save the file and repack the zip again and flash.
Click to expand...
Click to collapse
Im from bangladesh, i want to install poco x2 rom in my redmi k30. After installing, did u get ota updates?

If ulocked bootloader, You can flash via fastboot mode. Just download fastboot/edl/factory files

rollback to miui 12 pls send help

i was on miui 11 then i installed twrp correctly and even used custom roms then i got bored of them and then installed eu miui 12 for redmi k30 which has some bugs and now i want to go back to official miui as it has lauched , so i downloaded miui 12 from xda the fastboot rom then tried flashing it with miflash but it shows crclist error i have adb and fastboot installed on my comp please help me go back to miui :crying:
update : i have also put the folder in my c drive and shortend the name to + edited the bat file to skip the anti-rollback function nothing is working

Did you try moving yor folder to the desktop?

tuskan_supa said:
Did you try moving yor folder to the desktop?
Click to expand...
Click to collapse
I was first doing it from desktop only it wasn't working so I put both mi flash and the fastboot ROM in the c drive .
It did not work

On Xiaomi.eu there's a table that show K30 does not have anti-rollback, so I don't think your problem is related to anti-rollback.

Never_Sm1le said:
On Xiaomi.eu there's a table that show K30 does not have anti-rollback, so I don't think your problem is related to anti-rollback.
Click to expand...
Click to collapse
I have the Indian variant maybe that has the anti-rollback

bewakoof said:
I have the Indian variant maybe that has the anti-rollback
Click to expand...
Click to collapse
Indian variant of K30? Isn't that just Poco X2? Otherwise K30 is a Chinese-only phone, no other variant.

Never_Sm1le said:
Indian variant of K30? Isn't that just Poco X2? Otherwise K30 is a Chinese-only phone, no other variant.
Click to expand...
Click to collapse
Yeah poco x2 and k30 are being treated as a different phone I think

bewakoof said:
Yeah poco x2 and k30 are being treated as a different phone I think
Click to expand...
Click to collapse
Can't say for sure but I think if K30 doesn't have anti-rollback then Poco X2 wouldn't too. Also have you install Qualcomm USB driver? This show up after I google "flash crclist error". Other solution is create a folder named "log" in MiFlash folder. Try these.

Never_Sm1le said:
Can't say for sure but I think if K30 doesn't have anti-rollback then Poco X2 wouldn't too. Also have you install Qualcomm USB driver? This show up after I google "flash crclist error". Other solution is create a folder named "log" in MiFlash folder. Try these.
Click to expand...
Click to collapse
I have installed all the drivers via miflash 5 times but I have not tried the log one . I will try this method on this coming Saturday and then update ( it would be very helpful if you shared the link as I have practically gone through every result and still couldn't find the 'log' folder one )

bewakoof said:
I have installed all the drivers via miflash 5 times but I have not tried the log one . I will try this method on this coming Saturday and then update ( it would be very helpful if you shared the link as I have practically gone through every result and still couldn't find the 'log' folder one )
Click to expand...
Click to collapse
That solution is shared by the Mi Vietnam community. I haven't encounter problems like yours so I don't know if it's work or not.
This is what I usually do: Install MiFlashPro on the E drive, extract the fastboot rom on the root of the drive (E:/ rom folder) then install. The install went smoothly.

Never_Sm1le said:
That solution is shared by the Mi Vietnam community. I haven't encounter problems like yours so I don't know if it's work or not.
This is what I usually do: Install MiFlashPro on the E drive, extract the fastboot rom on the root of the drive (E:/ rom folder) then install. The install went smoothly.
Click to expand...
Click to collapse
I didn't knew about the mi flash pro tool I was using miflash , anyway that tool looks kinda promising I'll definitely do the flash by Saturday and then update
Thank you so much for your help kind stranger .

bewakoof said:
i was on miui 11 then i installed twrp correctly and even used custom roms then i got bored of them and then installed eu miui 12 for redmi k30 which has some bugs and now i want to go back to official miui as it has lauched , so i downloaded miui 12 from xda the fastboot rom then tried flashing it with miflash but it shows crclist error i have adb and fastboot installed on my comp please help me go back to miui :crying:
update : i have also put the folder in my c drive and shortend the name to + edited the bat file to skip the anti-rollback function nothing is working
Click to expand...
Click to collapse
Crclist error is shown when the path of the rom is too long/complicated, move the rom to desktop then try.

bewakoof said:
i was on miui 11 then i installed twrp correctly and even used custom roms then i got bored of them and then installed eu miui 12 for redmi k30 which has some bugs and now i want to go back to official miui as it has lauched , so i downloaded miui 12 from xda the fastboot rom then tried flashing it with miflash but it shows crclist error i have adb and fastboot installed on my comp please help me go back to miui :crying:
update : i have also put the folder in my c drive and shortend the name to + edited the bat file to skip the anti-rollback function nothing is working
Click to expand...
Click to collapse
Hey download fastboot rom for your respective device then extract the zip folder then open flash_all.sh and the script gets executed.

Android 11 Red Magic Rom [FLASHGUIDE]

Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!

nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!

Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??

nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??

There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool

jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11

But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me

jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done

What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.

jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11

walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.

[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64

Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?

Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.

Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.

Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash