Related
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
You forgott to flash the Kernel Use Fastboot for this.
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Open the Zip and Copy the boot.img to your pc
3)Put the ROM to sdcard
4)Boot your phone into fastboot (In Phone power off state press power + volume down)
5)connect to the pc via usb
6)use your commandline on pc + fastboot.exe and do the following command "fastboot flash boot <PathToTheBoot.ImgFromStep2>"
7)use your commandline on pc + fastboot.exe and do the following command "fastboot erase cache"
8)short press power on the phone to get in hboot
9)use volume down and then power to select "Recovery"
10)wipe data/factory reset
11)Flash rom
the_Storm said:
Hello guys,
It was my first time to flash a ROM. I tried to install the ROM of [URL="http://forum.xda-developers.com/showthread.php?t=1763240][ROM][Jul 16]Jellybean 4.1.1 for Endeavoru AOSP Build[/URL]
Here is what I did
1)Download ROM from here http://jellybean.tom.gascoigne.me/continuous/tg_endeavoru-ota-15.zip
2)Put them to sdcard
3)wipe data/factory reset
4)Flash rom
5) I rebooted my HTC but the phone never started I am stuck on the neXus logo :S :S It is like infinite booting... so what did I do wrong guys? and how to fix it ??
Thank you
Click to expand...
Click to collapse
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
the_Storm said:
Thank you Bro it worked ansI was able to boot and see the home screen but now I have two problems ...
The first one I don't have any apps even google play.. .I think I have to install this Jellybean Gapps "http://jellybean.tom.gascoigne.me/gapps-jb.2.zip"
but I don't have an idea of how to install it like from recovery mood or something ... so how can I install GApps ...
The other problem is that Is there anyway to activate the audio... cause on my jellybean everything is working except the camera and the Audio.. I don't care about the Camera a lot now but the Audio.. I can't even make calls... so do you know anyway to activate the audio ??
Click to expand...
Click to collapse
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
the_Storm said:
Thank you body trying the latest version of the ROM now. I have a small question you said I should flash rom with Gapps to install google apps on the jellybean ROM. For me that doesn't make sense..I mean how the phone will distinguish between gapps and the jellybean ROM itself. Isn't it possible when I flash gapps it overwrites the jellybean ROM itself and I lost the ROM and the phone will not be working?
Again Thank you so much for your help
Click to expand...
Click to collapse
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thank you bro I will test it tonight...
If you have time would you look at this please
http://forum.xda-developers.com/showthread.php?t=1781182
Thank you ..
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
Thanks very much for all of this it will help me a lot when I get round to flashing!
In reference to this, when I'm coming to update to the latest version of this rom, what's the procedure to follow?
Hi,
I'm trying to flash Jellybean 4.1.1 build #27 but it fails no matter what. I have followed the procedure, flashed the rom, erased cache, wiped data/factory reset, rebooted on recovery.
Here's what I get:
-- Install /sdcard/tg_endeavoru-ota-27.zip ...
Finding update package ...
Opening update package ...
Installing update ...
assert failed: getprop("ro.product.device") == "endeavoru" || getprop("ro.build.product") == "endeavoru"
E:Error in /sdcard/tg_endeavoru-ota-27.zip
(Status 7)
* Verifying filesystem...
* Verifying partition sizes...
Error Flashing zip '/sdcard/tg_endeavoru-ota-27.zip'
Failed
Any idea what I could be doing wrong?
Thank you very much in advance for your help.
MarcoHD said:
Nope because the rom will be extracted to the /system partition on your phone. The gapps.zip also but it will not override anything. It will only copy some apps(.apk) to the /system/app .
Thrust me
PC Example: You copy 2 different files to one folder if the files has different names you can copy without overwriting anything
Click to expand...
Click to collapse
I've got JB running on my phone but when I try to boot into recovery to install the apps it won't work. I get the red exclamation mark. I am coming from twrp2.2.0 I followed these instructions
Download the latest CM10 .zip file from here.
Download JB Google Apps from here.
Reboot into CWM or TWRP recovery.
Factory Data reset. (MUST DO THIS!)
Flash CM10 .zip file.
Reboot.
Reboot into recovery.
Flash JB Google apps.
Enjoy!
Any help would be great
jb 4.1.1 how screenshot??
hello All, this is my first quest in this forum. i'have flashed jb 4.1.1 in my device (one x) ad is all ok (wifi go in sleeping mode too fast but when it stand up go well) i need to make a lot of screenshot and i dont know how. Pls help
PS: i think this forum is very usefull for modding android, great work!!!)
Imerio
HavE fUn
MarcoHD said:
Hey yes you have to download the Gapps zip, place it on the sd-card and then flash it in recovery.
So:
1) Donwnload http://jellybean.tom.gascoigne.me/gapps-jb.2.zip
2) Push the on your sd-card
3) Boot into the recovery
4) Flash zip from sd-card like you chose the rom.zip
5) Reboot
The mic is not working on this Build, but we except a new Version with working Mic for today.
For latest build see here http://jellybean.tom.gascoigne.me/continuous/
Or you try http://forum.xda-developers.com/showthread.php?t=1780005 this rom. Flashing same procedure. This Rom has a working mic
Click to expand...
Click to collapse
I love you and thank you. Simple, easy, quick instructions
Android 6.0.1 for cubotx11
Android 6.0.1 for cubotx11
How to install:
1. Flash ctr or twrp recovery for your device (you can download it from the download page.)
2. You can find a guide on our website how to flash the recover via spflash. (You can use the tutourial for CM12.1, same process.)
3. Boot your device to recovery.
4. Go to mount ->wipe system and wipe data and wipe cache.
5. Reboot to recovery.
6. Install the rom and gapps in same order and same time.
7. Please dont setup the sdcard just close the notification .
8. Please use the gapps on download page (others wont work)
Fixed:
youtube 720p play back
wifi drop
GPS
Green video on Streaming
and many more
Bugs
VPN
Download:
http://www.cubotx.com/forum/viewthread.php?thread_id=73
Not the place for this.
Thread closed.
First of all i would like to thank @erfanoabdi for providing the GSI and providing fixes
Also I'd Thank @abhayruparel for helping me flash this GSI
1) First Of all Your Internal Storage Will be wiped out so backup important data
2) U need to be in Non Treble TWRP Download Link
3) Then Decrypt First by formatting data partition (Go to Wipe ---- Format Data)
Note ecryption is an important step do not skip it!!
4) Reboot to recovery
5) Change Data partition to f2fs
Note :- If at any point TWRP gives error message like failed to format or mount /data , reboot to recovery
6) Change data partition to ext4
7) Wipe System, Data, Internal Storage, Cache, Dalvik Cache
8) Now reboot to recovery even if u are on recovery
9) Now Flash Treble TWRP by mike Download Link
10) Reboot to recovery again (Mandatory)
11) Now flash los 15.1 Official only no other zip Download Link
Please do not boot into the ROM because it automatically encrypts and all your previous efforts will be in vain!!!
12) Now wipe System, data, cache, internal Storage
13) Now Flash Android P semi GSI in system (Remember the GSI file which you will download will be ".zip" file , extract it from PC and use the ".img file") GSI Link = Download Link
14) Reboot to twrp again This is mandatory
15 Now go to mount and check all the Checkboxes, mounting vendor is mandatory
16) Then Flash Post Zip 1 = Download Link
17) Then Flash Post Zip 2 = Download Link
18) Then Flash Post Zip 3 = Download Link
19) Then Flash Incall fix zip is not needed in Developer Preview 4 !!
20) Then Flash p lag fix zip Download Link
21) Treble Magisk = Download Link
Now Reboot to rom and viola U will have android P gsi boot on ur P2!!!
Bugs that i found While Using this GSI (Kuntao Specific)
VOLTE
FP Gestures
Camera mode switching takes 3 to 4 seconds to open
Sometimes it lags for 3 to 4 seconds (not a big deal tho)
Double Tap To Wake
NFC
I have found these much bugs so far if you find any more Please report it!!
Now a video tutorial for this is live on my channel !!!! Youtube Link
Note = All the links that i have shared are not my works all the zips are made by @erfanoabdi .
Also Official Treble Los 15.1 and Treble TWRP is made by @mikeioannina , i am just sharing this. as a guide For download link of the GSI and additional Information please visit this thread
Enjoy!!!!
gamefreaksuraj said:
First of all i would like to thank @erfanoabdi for providing the GSI and providing fixes
Also I'd Thank @abhayruparel for helping me flash this GSI
1) First Of all Your Internal Storage Will be wiped out so backup important data
2) U need to be in Non Treble TWRP Download Link
3) Then Decrypt First by formatting data partition (Go to Wipe ---- Format Data)
Note ecryption is an important step do not skip it!!
4) Reboot to recovery
5) Change Data partition to f2fs
Note :- If at any point TWRP gives error message like failed to format or mount /data , reboot to recovery
6) Change data partition to ext4
7) Wipe System, Data, Internal Storage, Cache, Dalvik Cache
8) Now reboot to recovery even if u are on recovery
9) Now Flash Treble TWRP by mike Download Link
10) Reboot to recovery again (Mandatory)
11) Now flash los 15.1 Official only no other zip Download Link
Please do not boot into the ROM because it automatically encrypts and all your previous efforts will be in vain!!!
12) Now wipe System, data, cache, internal Storage
13) Now Flash Android P semi GSI in system (Remember the GSI file which you will download will be ".zip" file , extract it from PC and use the ".img file")
14) Reboot to twrp again This is mandatory
15 Now go to mount and check all the Checkboxes, mounting vendor is mandatory
16) Then Flash Post Zip 1 = Download Link
17) Then Flash Post Zip 2 = Download Link
18) Then Flash Post Zip 3 = Download Link
19) Then Flash Incall fix zip Download Link
20) Then Flash p lag fix zip Download Link
Now Reboot to rom and viola U will have android P gsi boot on ur P2!!!
It will still give same error like " Please contact your device manufacturer.. etc etc " ignore it as it will boot normally into the rom
Bugs that i found While Using this GSI (Kuntao Specific)
VOLTE
Dark Mode
FP Gestures
Front camera takes 3 to 4 seconds to open
Magisk Gave Bootloop to Abhay but for some other guy 16.6 beta Worked (Magisk I have not tested )
Sometimes it lags for 3 to 4 seconds (not a big deal tho)
I have found these much bugs so far if you find any more Please report it!!
Note = All the links that i have shared are not my works all the zips are made by @erfanoabdi .
Also Official Treble Los 15.1 and Treble TWRP is made by @mikeioannina , i am just sharing this. as a guide For download link of the GSI and additional Information please visit this thread
Enjoy!!!!
Click to expand...
Click to collapse
Abb hoga tumhara naam
get ready for some fame :angel:
gamefreaksuraj said:
First of all i would like to thank @erfanoabdi for providing the GSI and providing fixes
Also I'd Thank @abhayruparel for helping me flash this GSI
1) First Of all Your Internal Storage Will be wiped out so backup important data
2) U need to be in Non Treble TWRP Download Link
3) Then Decrypt First by formatting data partition (Go to Wipe ---- Format Data)
Note ecryption is an important step do not skip it!!
4) Reboot to recovery
5) Change Data partition to f2fs
Note :- If at any point TWRP gives error message like failed to format or mount /data , reboot to recovery
6) Change data partition to ext4
7) Wipe System, Data, Internal Storage, Cache, Dalvik Cache
8) Now reboot to recovery even if u are on recovery
9) Now Flash Treble TWRP by mike Download Link
10) Reboot to recovery again (Mandatory)
11) Now flash los 15.1 Official only no other zip Download Link
Please do not boot into the ROM because it automatically encrypts and all your previous efforts will be in vain!!!
12) Now wipe System, data, cache, internal Storage
13) Now Flash Android P semi GSI in system (Remember the GSI file which you will download will be ".zip" file , extract it from PC and use the ".img file")
14) Reboot to twrp again This is mandatory
15 Now go to mount and check all the Checkboxes, mounting vendor is mandatory
16) Then Flash Post Zip 1 = Download Link
17) Then Flash Post Zip 2 = Download Link
18) Then Flash Post Zip 3 = Download Link
19) Then Flash Incall fix zip Download Link
20) Then Flash p lag fix zip Download Link
Now Reboot to rom and viola U will have android P gsi boot on ur P2!!!
It will still give same error like " Please contact your device manufacturer.. etc etc " ignore it as it will boot normally into the rom
Bugs that i found While Using this GSI (Kuntao Specific)
VOLTE
Dark Mode
FP Gestures
Incoming Calls Sometimes work , sometimes they do not work
Sometimes incoming audio gets distorted
Front camera takes 3 to 4 seconds to open
Magisk Gave me black screen blue LED
Sometimes it lags for 3 to 4 seconds (not a big deal tho)
I have found these much bugs so far if you find any more Please report it!!
Note = All the links that i have shared are not my works all the zips are made by @erfanoabdi .
Also Official Treble Los 15.1 and Treble TWRP is made by @mikeioannina , i am just sharing this. as a guide For download link of the GSI and additional Information please visit this thread
Enjoy!!!!
Click to expand...
Click to collapse
Bugs NFC, DT2W
Can someone make videos for p2 android p installation??
berkay0733 said:
Can someone make videos for p2 android p installation??
Click to expand...
Click to collapse
+1
berkay0733 said:
Can someone make videos for p2 android p installation??
Click to expand...
Click to collapse
Dude the steps are given in such a great and detailed manner... And I was able to install in the first attempt....it's not good to be spoon fed Everytime....just follow it step by step..and ul be able to flash it successfully...
I didnt install plagfix, is necessary?
Pls link 16 and 17 not working
iniro said:
I didnt install plagfix, is necessary?
Click to expand...
Click to collapse
Ul face a lot of freezes if u don't
ASP02 said:
Ul face a lot of freezes if u don't
Click to expand...
Click to collapse
Maybe when openning camera. Can I flash now? Or I need to wipe all?
Thx!
iniro said:
Maybe when openning camera. Can I flash now? Or I need to wipe all?
Thx!
Click to expand...
Click to collapse
Not opening camera ..but while switching from front camera to back cam or vice versa....
Take backup.. follow steps carefully
dp4 released
berkay0733 said:
Can someone make videos for p2 android p installation??
Click to expand...
Click to collapse
Yes brother , i will infact make a video for installing DP4 gsi tonight , expect the video to arrive tomorrow
I will be posting my youtube video link here
Guyzz Youtube tutorial for this is live now!!! , link in the main post
Anyone with dp4 and working gcam? To me closes when tap on settings.
iniro said:
Anyone with dp4 and working gcam? To me closes when tap on settings.
Click to expand...
Click to collapse
yes , gcam is a true problem. but front cam portrait works (colors not good)
What camera do you use?
Hi @gamefreaksuraj i have read somewhere that it has calling bug where you can't heard the voice. It is true?
And what about the substratum, does it work? I really liked the swift black theme.
Can we use it as a daily driver?
shabab malik said:
Hi @gamefreaksuraj i have read somewhere that it has calling bug where you can't heard the voice. It is true?
And what about the substratum, does it work? I really liked the swift black theme.
Can we use it as a daily driver?
Click to expand...
Click to collapse
no calling issue in dp4
Im using like daily driver. Form me only issue is that I cant enter on gcam settings.
This guide is specifically aimed for Z010DD users who want to flash custom ROMs:If you want to stay on stock and only wanna flash TWRP and root the Stock ROM, please skip this thread and refer to @jide1 's guide here instead: https://forum.xda-developers.com/as...ot-asus-zenfone-max-zc550kl-qualcomm-t3652518
Things to be noted beforehand:
1. Make sure you are on the latest/final stock rom/firmware
2. Need Unlocked bootloader (Linked below, install the apk and follow the steps)
3. Take backup of all of your data from the internal storage. (To avoid depression if accidentally wiped your precious data)
4. Minimal ADB and Fastboot (Thread Linked below, Download from there and follow on-screen steps).
Steps:
A. To flash TWRP:
1. Once you have unlocked the bootloader, download 'minimal adb and fastboot zip' and PBRP zip(extract img from it).
2. Boot into fastboot by switching off the device, then POWER + VOLUME 'UP'. (You'll enter CSC ode screen, which is fastboot so don't worry)
3. Place the recovery image into the fastboot folder and open a command window there.
4. Connect your device, then type 'fastboot devices' and Enter, just to verify if your device is shown.
5. type: fastboot flash recovery recoveryname.img
THE NEXT STEP IS IMPORTANT, Pay Attention.
6. Now REBOOT Directly to twrp by holding POWER + VOLUME 'DOWN'. Don't boot into system else stock recovery will get restored.
B. Preparing for Flashing ROMs:
Once you have booted to twrp successfully, you will need to 'format' all the partitions, which includes:
System, Data, Cache, Dalvik/ART Cache, & Internal Storage.
HERE YOU WILL LOSE ALL OF YOUR DATA, YOU HAVE BEEN WARNED ALREADY SO, yeah.
Click to expand...
Click to collapse
1. In TWRP, go to WIPE -> ADVANCED WIPE;
2. Select the above listed partitions and then SWIPE TO WIPE.
Note: You will notice a partition called 'ASDF' ,wipe/skip, doesn't matter.
3. Come back to home, go to REBOOT -> RECOVERY
C. Flashing ROMs:
1. Download the ROM, Patch, and Kernel zip (Linked Below).
2. Flash them in the mentioned order.
3. Flash Opengapps (if needed) (Nano Gapps recomended).
4. Reboot.
(NOTE: FOR MAGISK, FLASH IT 'AFTER FIRST BOOT ONLY', AND IF FLASHING ZIP NOT WORKING, THEN see POST #3)
Bugs and Notes:
1. Notification LED doesn't BLINK when a notification arrives, it stays on (colors are correct though).
2. VoLTE is broken on pie roms (ignore the volte logo), stick to Oreo if you want VoLTE. (LTE data works fine).
3. Reboot Sometimes get stuck in black screen, its RANDOM, LONG Press the power button for 15 secs instead if that happens.
4. If any ROM contains 'Always On' functionality, disable it as the feature doesn't work properly. (Ambient display has no issues)
Links: Refer POST #2 .
Credits:
@SakilMondal for roms.
@YaAlex for kernel and patch for Z010DD.
Myself for testing.
Created 2019-04-22
Last Updated 2019-05-20
Links:
ROMs: https://sourceforge.net/projects/zenfone-max-updates/files/Z010D/ (Please flash the latest ones only, don't use old ones)
Patch (link updated): https://anonymousfiles.io/3WLplRtD/
Kernel (link updated + new kernel update): https://anonymousfiles.io/m4oKP6wL/
TWRP Recovery (Image file, Flash via fastboot): https://drive.google.com/file/d/1txHT0vRNo0gTMkD0Sb5kpuQQT0dAiphH/view
ASUS Official Bootloader Unlock Tool for 8939 Devices: http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
Minimal ADB and Fastboot: https://forum.xda-developers.com/showthread.php?t=2317790
Troubleshooting:
Instructions for Magisk:
1. Extract boot image from the rom zip
2. Go to Magisk Manager app
3. Tap 'Install' next to 'Magisk is not installed' line.
4. Tap 'Select and patch a file'
5. Navigate to the extracted boot image. It will now create a new boot image and save it in mentioned location.
6. Reboot to recovery, Flash the Boot image + KERNEL zip.
7. Reboot to system.
To fix CTS Mismatch in Magisk:
Open /system/build.prop, replace the line 'ro.build.fingerprint=' with:
Code:
ro.build.fingerprint=asus/WW_Phone/ASUS_Z010_2:6.0.1/MMB29P/13.8.26.80-20161230:user/release-keys
Open /system/vendor/build.prop , replace the line 'ro.vendor.build.fingerprint=' with:
Code:
ro.vendor.build.fingerprint=asus/WW_Phone/ASUS_Z010_2:6.0.1/MMB29P/13.8.26.80-20161230:user/release-keys
Patch is required for sd410 devices??
koushik99 said:
Patch is required for sd410 devices??
Click to expand...
Click to collapse
Nope, patch is only for DD.
Guide has been updated. Please check.
unable to flash GAPPS
Hai , i got a problem , phone shutdowns after flashing GAPPS (opengapps) , i tried Many RAMS(DOT OS, lineage-16.0-20190514-Z010D, BootleggersROM-Pie4Z010D.4.1-Stable-Unshishufied-20190421-170442 ,RR-P-v7.0.2-20190505-Z010D-Unofficial ) , without GAPPS Flashing it is , ROM working good , please let us know how to fl
I cant turn off the phone with pie,
i need to go in recovery first to power off otherwise after a while it turns back on
is it a known bug?
PRASAD.ASRS said:
Hai , i got a problem , phone shutdowns after flashing GAPPS (opengapps) , i tried Many RAMS(DOT OS, lineage-16.0-20190514-Z010D, BootleggersROM-Pie4Z010D.4.1-Stable-Unshishufied-20190421-170442 ,RR-P-v7.0.2-20190505-Z010D-Unofficial ) , without GAPPS Flashing it is , ROM working good , please let us know how to fl
Click to expand...
Click to collapse
Looks like you're using aroma gapps..
Use micro gapps or below. Here everything works fine.
ihatebarrels said:
I cant turn off the phone with pie,
i need to go in recovery first to power off otherwise after a while it turns back on
is it a known bug?
Click to expand...
Click to collapse
In both oreo and pie, for both z010d and dd, reboot and shutdown is an issue
It doesn't happen everytime, its random, and no fix is found yet.
Is it working on asus zenfone max 2016 sd 615?
Can anyone give me the updated link for the dd-fix-r5.zip and GUNMetal-R3.zip files
james_imch said:
Can anyone give me the updated link for the dd-fix-r5.zip and GUNMetal-R3.zip files
Click to expand...
Click to collapse
I just saw that the link was no longer working (would have been better if you pointed out that first instead)
Anyways,
Link is updated, check again (kernel is updated,patch remains the same).
Kaustav365 said:
Is it working on asus zenfone max 2016 sd 615?
Click to expand...
Click to collapse
Hope you have read the OP properly
This thread is only for sd615/Z010DD/MSM8939, and its clearly mentioned.
TechNova said:
I just saw that the link was no longer working (would have been better if you pointed out that first instead)
Anyways,
Link is updated, check again (kernel is updated,patch remains the same).
Click to expand...
Click to collapse
PBRP Recovery (flashable zip) link is also not working. Please update it.
james_imch said:
PBRP Recovery (flashable zip) link is also not working. Please update it.
Click to expand...
Click to collapse
Done,
Removed pbrp and now Twrp link posted.
TechNova said:
Looks like you're using aroma gapps..
Use micro gapps or below. Here everything works fine.
Click to expand...
Click to collapse
Hey! I am also facing the same issue. I tried the nano version of Gapps on my Asus Zenfone Max Z010D and my phone is still crashing it keeps restarting and then automatically turns off. Is there any issue to fix this?
unable to flash roms it shows up no digest found or invalid zip or update error 7
please help how do i find correct rom for sd615 8939
Eric0000 said:
unable to flash roms it shows up no digest found or invalid zip or update error 7
please help how do i find correct rom for sd615 8939
Click to expand...
Click to collapse
I too facing same problem
Unlocking the apk no longer works
Hello, so, my problem is same as title says.
I´ll try to write it as short as possible.
I tried to install Resurrection Remix, Lineage OS, Arrow OS, BootLeggers ( All are unofficial builds for my Redmi 6 ), but everytime I got the constant rebooting bootloop, so I need to go to TWRP and flash Official MIUI ROM
Here are my installation steps for Resurrection Remix ( Pretty same as In this Tutorial ) :
1. - I went to TWRP ( LR. Team TWRP 3.3.1 )
2. - It was showing Internal Storage (0MB), so I click on Wipe - Format Data - yes
3. - After that also Wipe - Advanced Wipe - I selected Dalvik / ART Cache, System, Cache, Data, Vendor
4. - I moved RR Flashable .zip file and Magisk v19.3 from my PC to phones Internal Storage (via USB Cable)
5. - I clicked on Install - RR-P-v7.0.2-20200111-cereus-Unofficial.zip - Add more zips - Magisk-v19.3.zip
6. - After that, I clicked on Wipe cache/dalvik, checked if I´ve got any errors and clicked on Reboot
7. - After that, phone started to restart around every 5 seconds until I went to TWRP and Installed Official MIUI ROM
BONUS. - Tried also on second try to flash MIUI Firmware before RR .zip file, but the results were same.
Also I don´t want Gapps in my phone so i didn´t flash them.
With other ROMs it was same, always bootloop. Here are all .zips, links to forums, tutorials that I followed.
So please message me what´s the issue, especially while installing Resurrection Remix, because this is the ROM that I would like to install the most.
I know it's too late for reply I'm just posting this so that others (like myself) can see this. Lets keep the community for this phone alive!
Install MIUI V10.4.4.0 (I found that this version works for me), Disable DM verity (https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/) and finally wipe data and install your custom rom.
It will bootloop on the first boot so wait a few seconds then force reboot