Related
Hi, I just got a Sensation a couple of days ago and there have been a few problems I hope you guys could help me with.
Firstly, my Android Market only shows a few of the apps that there should be. Loads of apps such as the launchers or Angry Birds for example aren't showing up. When I open the Market from my desktop it says that these apps cannot be installed in my country (UAE) when i have friends here with other Android phones with the very same apps.
Secondly, whenever I play a video on the phone it plays fine for about a minute and then the audio switches off and it only comes back if I skip scenes. I don't if this is a fault with my phone or maybe a wrong format I'm using, can you guys recommend a converter?
Thanks for any help, it's much appreciated.
lolwut16 said:
Hi, I just got a Sensation a couple of days ago and there have been a few problems I hope you guys could help me with.
Firstly, my Android Market only shows a few of the apps that there should be. Loads of apps such as the launchers or Angry Birds for example aren't showing up. When I open the Market from my desktop it says that these apps cannot be installed in my country (UAE) when i have friends here with other Android phones with the very same apps.
Secondly, whenever I play a video on the phone it plays fine for about a minute and then the audio switches off and it only comes back if I skip scenes. I don't if this is a fault with my phone or maybe a wrong format I'm using, can you guys recommend a converter?
Thanks for any help, it's much appreciated.
Click to expand...
Click to collapse
I do not know the answer to your first question, but I would assume that your friends either have a different ROM flashed to their phone that allows them to bypass country restrictions, or they have downloaded the APK's from somewhere else, then 'adb push'ed them to their device... Someone more knowledgeable than me can answer that one...
The second question regarding video converters... I have used an application called Handbrake in the past to re-encode my video files, and it has worked wonders. I highly recommend it. Link: http://handbrake.fr/
Hope this helps.
lolwut16 said:
Hi, I just got a Sensation a couple of days ago and there have been a few problems I hope you guys could help me with.
Firstly, my Android Market only shows a few of the apps that there should be. Loads of apps such as the launchers or Angry Birds for example aren't showing up. When I open the Market from my desktop it says that these apps cannot be installed in my country (UAE) when i have friends here with other Android phones with the very same apps.
Secondly, whenever I play a video on the phone it plays fine for about a minute and then the audio switches off and it only comes back if I skip scenes. I don't if this is a fault with my phone or maybe a wrong format I'm using, can you guys recommend a converter?
Thanks for any help, it's much appreciated.
Click to expand...
Click to collapse
You can try to find the apk for the apps you want and install them outside of Market by copying the apk to your SD card then installing from there (be sure to check the allow non-market applications box under the applications settings) this should (I think) bypass any country restrictions. If you look around I'm sure you can find the apks you want. If not you could probably make a request for certain apps and someone can upload the apk for you.
Thanks, I'll let you know how it goes.
Where do I paste the App file in the SD card?
Anywhere . You can, for example create new folder - "Apps" on yours sd and paste applications there.
Wystukane z mojego Swifta przy użyciu Tapatalk
Ahh, sorry should've been more specific. After copying the file over, where do I go in the phone to install it?
Nevermind, got it.
You can use the web-market to install apps. No idea why it doesn't appear on the phone's market app, but it should appear on the web market.
market.android.com
For the second problem: what video format are you using? Try *.mp4 or *.avi and see if they work Also, what resolution is the video?
lolwut16 said:
Secondly, whenever I play a video on the phone it plays fine for about a minute and then the audio switches off and it only comes back if I skip scenes. I don't if this is a fault with my phone or maybe a wrong format I'm using, can you guys recommend a converter?
Thanks for any help, it's much appreciated.
Click to expand...
Click to collapse
You can try another video player such as MoboPlayer to see if you have converted your video ok.
https://market.android.com/details?id=com.clov4r.android.nil&hl=en
I also use HandBrake converter.
There is an app called android market enabler "lets you access paid apps from countries where paid apps are not yet available". But it requires you to root your phone which is not currently possible on our phone. This could be what your friends are using.
http://www.xda-developers.com/android/market-enabler-v3-0-8-for-root-users/
I just copied some random avi files I had on my desktop, which gave me the problem above. Haven't tried using converter yet but I'll give it a shot now.
regarding your second problem
http://forum.xda-developers.com/showthread.php?t=1104685
Try the dice player. It's plays my .MKV 720p files perfect.
Sent from my HTC Sensation 4G using XDA Premium App
Thanks guys, I tried the qqplayer and its playing perfectly. Though one more thing, how do you set custom (from the SD card) notifications for things like messages or emails? Atm I can only find it for ringtones. Oh and how do I switch off the annoying sound upon unlocking?
Sorry for the trouble, first time user and all. =/
lolwut16,
I am from UAE too and have the same problems with paid apps from Android Market.
I am just waiting a software solution to turn my Sensation S-off and install a "market enabler".
You are not alone........
lolwut16 said:
Thanks guys, I tried the qqplayer and its playing perfectly. Though one more thing, how do you set custom (from the SD card) notifications for things like messages or emails? Atm I can only find it for ringtones. Oh and how do I switch off the annoying sound upon unlocking?
Sorry for the trouble, first time user and all. =/
Click to expand...
Click to collapse
make a folder on the root of your storage card & name it notifications & put the sounds in there.
for the weather sound you can disable that in the weather app or somewhere like that
Work perfect for me (on landscape) , all u need is the 1.1.38 version (all devices)
have fun
i9apps said:
Work perfect for me (on landscape) , all u need is the 1.1.38 version (all devices)
have fun
Click to expand...
Click to collapse
Um, ...it's officially compatible with the Transformer. All you need is to buy it from the market.
Why are you telling people about your warez working, when the game can be legitimately purchased and played?
philburkhardt said:
Um, ...it's officially compatible with the Transformer. All you need is to buy it from the market.
Why are you telling people about your warez working, when the game can be legitimately purchased and played?
Click to expand...
Click to collapse
First,the most new version does not work on ICS. (No landscape mode)
Second, I didn't meant to the not legal version (just the older version)
Also, I only wanted to help u guys but if u think its not legal u can always delete the topic
Does deadspace play well with ps3 controller?
i9apps said:
First,the most new version does not work on ICS. (No landscape mode)
Second, I didn't meant to the not legal version (just the older version)
Also, I only wanted to help u guys but if u think its not legal u can always delete the topic
Click to expand...
Click to collapse
The new version does work on ICS. I have had it running problem free on both Revolver 4 and the Team Eos ROM.
...and I apologize, I'm not trying to get on your case. I just want to make sure people understand that it does work, and the best way to get it working is to buy it.
Don't like repeating myself and it only being 2 post ago but with no response I guess I will. Does Dead space play well with ps3 controller?
I couldn't play it well with a ps3 controller beacause i couldn't manage to map the keys well. There are a lot of swiping moves and it's hard to map well the keys for the ps3 controller. But i have a problem.
I have 4.0.3 version of official ICS and i get force close on Dead Space now. Does anyone have an idea how can i fix this? My version of the game is 1.1.38.
Hello again! I have fixed my problem by downloading fix permissions app from market. I just applied a fix permission and it is working again. Too bad i lost my saves and didn't thought of this earlier. I think the fix permissions app will work with any app that gives you force close issue.
Aissy said:
Hello again! I have fixed my problem by downloading fix permissions app from market. I just applied a fix permission and it is working again. Too bad i lost my saves and didn't thought of this earlier. I think the fix permissions app will work with any app that gives you force close issue.
Click to expand...
Click to collapse
Good advice, thanks!
Has anybody been able to get Jet Set Radio working? Was just released yesterday.
I loved this game on my Dreamcast, and the game play is simple enough that it could work well on a mobile device, but it just crashes after the loading screen for me. I think it's supposed to download additional data in addition to the 600mb Play store download, but it never does. Frustrating. App info said it was 1.75gb
https://play.google.com/store/apps/details?id=com.sega.jetsetradio If anybody else wants to give it a try...
half way
mesasone said:
Has anybody been able to get Jet Set Radio working? Was just released yesterday.
I loved this game on my Dreamcast, and the game play is simple enough that it could work well on a mobile device, but it just crashes after the loading screen for me. I think it's supposed to download additional data in addition to the 600mb Play store download, but it never does. Frustrating. App info said it was 1.75gb
https://play.google.com/store/apps/details?id=com.sega.jetsetradio If anybody else wants to give it a try...
Click to expand...
Click to collapse
i bought it on my motorola droid 3 it doesnt work crashes at title. i tried it on my original droid it works i can even use my ps3 controller with it lol
It's working fine for me. I had to clear out some space to get past the "prepairing" screen, but now it works fine. Might see if it works with the Moga controller, I'm not a big fan of the touch controls.
Sent from my HTC One X using xda app-developers app
hi everybody!
sorry for the non-descriptive title, but i have some questions i'd like to ask here. i just got my moto g 2 days ago, i switched from a samsung galaxy s+ (with cm10.2) so this is quite the change for me, hardware and software wise.
[ANSWERED] 1. first i missed the possibility to swipe my keyboard to type, i found many different apps for that, but my question would be what is the keyboard included in cyanogenmod? because since this can 'see' everything i type i want an app for that i can trust...
[ANSWERED] 2. i really liked the cLock app for time and weather in cm, but google-ing 'clock app' wasnt the most helpful thing i've ever done ^^ so here my queston would be aswel whats the cyanogenmod cLock app and where can i find it?!
[ANSWERED] 3. next thing would be how can i get something like pdroid on this device (i had it on the sgs+)? i would need root i assume, i saw lots of different methods for that aswel. one with like contacting motorola to get the rom unlocked or something like that. so whats the easiest way to get a privacy control on the moto g? i remember something like the new android has some inbuilt setting for that?!?
[ANSWERED] 4. something that is irritating me quite a lot are the software keys, because samsung has the back key on the right side and the moto has it on the left side. also i dont understand why there would be a key for recent apps instead of a menu key. same here: i saw lots of different methods to change that, some even with adding or getting rid of lines of the code. ok i managed to install cm on my sgs, but thats a little out of my capabilities ^^ so again what would be the easiest way to change the buttons around?
[ANSWERED] 5. another thing would be, how do i turn off the vibration when using the keyboard? i tried the setting under 'sound' -> 'vibrate on touch' (or something along those lines) but that didnt turn off all of the vibration, for example its still vibrating when i use the keyboard but not anymore when i open apps or menus.
maybe there is even the possibility to install a stable version of cyanogenmod on the moto g which would solve most of my issues? but since this is running so smoothly i dont want any nightly builds, alphas or betas on this thing right now...
btw i am using the nova launcher in case that makes any difference for any of the questions above!?
also i include this screenshot with all the version numbers in it because it might be useful: https://drive.google.com/file/d/0B5JftqugO1xsbnh1dTBrQzZVWXc/edit?usp=sharing
thanks a bunch in advance and for reading and i hope someone is willing and able to help me out here!:fingers-crossed:
EDIT:
all the questions above have been answered! only one more question is open atm, [ here ] thanks to everyone who contributed so far!
bad1080 said:
hi everybody!
sorry for the non-descriptive title, but i have some questions i'd like to ask here. i just got my moto g 2 days ago, i switched from a samsung galaxy s+ (with cm10.2) so this is quite the change for me, hardware and software wise.
1. first i missed the possibility to swipe my keyboard to type, i found many different apps for that, but my question would be what is the keyboard included in cyanogenmod? because since this can 'see' everything i type i want an app for that i can trust...
2. i really liked the cLock app for time and weather in cm, but google-ing 'clock app' wasnt the most helpful thing i've ever done ^^ so here my queston would be aswel whats the cyanogenmod cLock app and where can i find it?!
3. next thing would be how can i get something like pdroid on this device (i had it on the sgs+)? i would need root i assume, i saw lots of different methods for that aswel. one with like contacting motorola to get the rom unlocked or something like that. so whats the easiest way to get a privacy control on the moto g? i remember something like the new android has some inbuilt setting for that?!?
4. something that is irritating me quite a lot are the software keys, because samsung has the back key on the right side and the moto has it on the left side. also i dont understand why there would be a key for recent apps instead of a menu key. same here: i saw lots of different methods to change that, some even with adding or getting rid of lines of the code. ok i managed to install cm on my sgs, but thats a little out of my capabilities ^^ so again what would be the easiest way to change the buttons around?
5. another thing would be, how do i turn off the vibration when using the keyboard? i tried the setting under 'sound' -> 'vibrate on touch' (or something along those lines) but that didnt turn off all of the vibration, for example its still vibrating when i use the keyboard but not anymore when i open apps or menus.
maybe there is even the possibility to install a stable version of cyanogenmod on the moto g which would solve most of my issues? but since this is running so smoothly i dont want any nightly builds, alphas or betas on this thing right now...
btw i am using the nova launcher in case that makes any difference for any of the questions above!?
also i include this screenshot with all the version numbers in it because it might be useful: https://drive.google.com/file/d/0B5JftqugO1xsbnh1dTBrQzZVWXc/edit?usp=sharing
thanks a bunch in advance and for reading and i hope someone is willing and able to help me out here!:fingers-crossed:
Click to expand...
Click to collapse
You can install the stock google keyboard from the play store for using swype, And there is cyangenmod version available for the G, you should go to the Moto G Original Android Development section of the forum for that. The vibration option should be in your sound / keyboard settings so you just need to look better i gues.
insanezz said:
You can install the stock google keyboard from the play store for using swype, And there is cyangenmod version available for the G, you should go to the Moto G Original Android Development section of the forum for that. The vibration option should be in your sound / keyboard settings so you just need to look better i gues.
Click to expand...
Click to collapse
hi and thanks for your answer! sadly i dont know which one 'the stock google keyboard' is, a link to the right app in the play store would be helpful...
bad1080 said:
hi and thanks for your answer! sadly i dont know which one 'the stock google keyboard' is, a link to the right app in the play store would be helpful, is it this one? https://play.google.com/store/apps/details?id=de.uniquedroid.appkeyboarddebugsettings&hl=de
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.google.android.inputmethod.latin
Here you go
Verstuurd vanaf mijn XT1032 met Tapatalk
insanezz said:
https://play.google.com/store/apps/details?id=com.google.android.inputmethod.latin
Here you go
Click to expand...
Click to collapse
thanks again, sadly the play store says: 'This app is incompatible with all of your devices.' and it seems this is because of some kind of regional restrictions for this app and/or my country. i cant imagine what and why that would be but i cant download it from there, is there any other way to get this? like an .apk or something?
bad1080 said:
thanks again, sadly the play store says: 'This app is incompatible with all of your devices.' and it seems this is because of some kind of regional restrictions for this app and/or my country. i cant imagine what and why that would be but i cant download it from there, is there any other way to get this? like an .apk or something?
Click to expand...
Click to collapse
Maybe it's not available in your country, im not sure if there's an apk for that. I suggest you google for : google keyboard or something like that
Verstuurd vanaf mijn XT1032 met Tapatalk
insanezz said:
Maybe it's not available in your country, im not sure if there's an apk for that. I suggest you google for : google keyboard or something like that
Click to expand...
Click to collapse
yea, thats what i was thinking after i posted my answer, sometimes my brain is in stupid mode *derp...
i found it here and i include the link for people with the same problem, the link is in german though:
http://www.androidnext.de/apps/google-keyboard-kitkat-tastatur-fuer-alle-geraete-apk-download/
and that works pretty good, thanks for the recommendation!
edit: i think i found the cLock app i was talking about, or a very similar one from the same developer it seems:
https://play.google.com/store/apps/details?id=com.dvtonder.chronus
its a very nice clock and weather app, i can even do more (like calendar). thats 2 down 3 to go!
bad1080 said:
3. next thing would be how can i get something like pdroid on this device (i had it on the sgs+)? i would need root i assume, i saw lots of different methods for that aswel. one with like contacting motorola to get the rom unlocked or something like that. so whats the easiest way to get a privacy control on the moto g? i remember something like the new android has some inbuilt setting for that?!?
4. something that is irritating me quite a lot are the software keys, because samsung has the back key on the right side and the moto has it on the left side. also i dont understand why there would be a key for recent apps instead of a menu key. same here: i saw lots of different methods to change that, some even with adding or getting rid of lines of the code. ok i managed to install cm on my sgs, but thats a little out of my capabilities ^^ so again what would be the easiest way to change the buttons around?
Click to expand...
Click to collapse
I suggest to install Xposed framework (Root needed), and then you can have this features with Gravity Box and Xprivacy (these are modules for Xposed).
In order to root, you have to unlock the bootloader (follow the instruction on Motorola website), then install a Custom recovery (I suggest Philz one) and supersu from Play store
Landrea said:
I suggest to install Xposed framework (Root needed), and then you can have this features with Gravity Box and Xprivacy (these are modules for Xposed).
In order to root, you have to unlock the bootloader (follow the instruction on Motorola website), then install a Custom recovery (I suggest Philz one) and supersu from Play store
Click to expand...
Click to collapse
hi and thank you for your contribution! i have unlocked and rooted my device successfully and installed the xposed framework. i havent quite got the hang of how xprivacy works as of now since its a little different from pdroid (and somewhat confusing imo). but thats just a matter of time i guess. i'll start reading here: https://github.com/M66B/XPrivacy#xprivacy or is there a better quick start guide?
i assume i can uninstall the 'xprivacy installer' (the one from google play) after i installed 'xprivacy'? and that gravity box is for the softkeys and its this one here: http://forum.xda-developers.com/showthread.php?t=2554049 ? i'll look into that tomorrow, since its getting late here and i dont wanna mess up now ^^
thanks again!
bad1080 said:
hi and thank you for your contribution! i have unlocked and rooted my device successfully and installed the xposed framework. i havent quite got the hang of how xprivacy works as of now since its a little different from pdroid (and somewhat confusing imo). but thats just a matter of time i guess. i'll start reading here: https://github.com/M66B/XPrivacy#xprivacy or is there a better quick start guide?
i assume i can uninstall the 'xprivacy installer' (the one from google play) after i installed 'xprivacy'? and that gravity box is for the softkeys and its this one here: http://forum.xda-developers.com/showthread.php?t=2554049 ? i'll look into that tomorrow, since its getting late here and i dont wanna mess up now ^^
thanks again!
Click to expand...
Click to collapse
Mornin', you're very welcome!
Xprivacy it's kind of complicated, but that reading will help you. I admit I don't use it, but I know it gives you full control on privacy and this is what you were looking for As you said, it's just a matter of time!
Btw you can install modules directly from Xposed Installer application, so you can bypass the Play Store.
Yes that's gravity box: it's very good and popular, you can surely reverse/set all the software keys, but also do a lot of modding!
It's more intuitive than Xprivacy, just go ahead options and try them, it's safe!
Good luck and forgive my english!
Landrea said:
Mornin', you're very welcome!
Xprivacy it's kind of complicated, but that reading will help you. I admit I don't use it, but I know it gives you full control on privacy and this is what you were looking for As you said, it's just a matter of time!
Btw you can install modules directly from Xposed Installer application, so you can bypass the Play Store.
Yes that's gravity box: it's very good and popular, you can surely reverse/set all the software keys, but also do a lot of modding!
It's more intuitive than Xprivacy, just go ahead options and try them, it's safe!
Good luck and forgive my english!
Click to expand...
Click to collapse
i am no native english tongue myself, so i dont notice anything wrong with your english. no need to excuse, i make mistakes myself.
i was under the impression that you could do 'stupid' stuff with xprivacy, like i was able to deny my camera app access to the camera with pdroid. that was a good way to test if it was properly working. so i tried and deny firefox access to 'internet' but that didnt seem to work, but then again it especially said its no going to break apps. i dig into all of this further later on.
just a question, what would be a good way to verify it is working like its supposed to? talking about xprivacy here...
edit: and to answer my question no.5: there is another setting for vibration in the keyboard itself, so you have to go through -> language and input -> select settings on your keyboard -> vibrate on key push (or sth along those lines), so basically you have to turn it off twice.
bad1080 said:
i am no native english tongue myself, so i dont notice anything wrong with your english. no need to excuse, i make mistakes myself.
i was under the impression that you could do 'stupid' stuff with xprivacy, like i was able to deny my camera app access to the camera with pdroid. that was a good way to test if it was properly working. so i tried and deny firefox access to 'internet' but that didnt seem to work, but then again it especially said its no going to break apps. i dig into all of this further later on.
just a question, what would be a good way to verify it is working like its supposed to? talking about xprivacy here...
edit: and to answer my question no.5: there is another setting for vibration in the keyboard itself, so you have to go through -> language and input -> select settings on your keyboard -> vibrate on key push (or sth along those lines), so basically you have to turn it off twice.
Click to expand...
Click to collapse
May @mokkami can help us understanding Xprivacy
---------- Post added at 03:34 PM ---------- Previous post was at 03:31 PM ----------
bad1080 said:
edit: and to answer my question no.5: there is another setting for vibration in the keyboard itself, so you have to go through -> language and input -> select settings on your keyboard -> vibrate on key push (or sth along those lines), so basically you have to turn it off twice.
Click to expand...
Click to collapse
Yeah, of course! I thought you managed this already! Keyboard is like an app itself, and has its own settings (i.e. vibration)
so i tried and deny firefox access to 'internet' but that didnt seem to work
Click to expand...
Click to collapse
I just tried it and i had no problem to deny the access for Firefox. When you open xprivacy in the app list tap on the Firefox Logo, not on the name or the checkbox. If you do so the details will open. If you now tick the category "Internet" then you will see that it is checked as a square, not as a hook. If it is a square it is only partially blocked. If you go now into the details of the category "Internet", you will see, that not all options are checked. Some are even marked red because they might be essential for the functionalty of the specific app. If you check also these and maybe also all others, then you can prevent Firefox of getting access to the Internet. If you check all items in Internet manually you'll see that category internet has now a hook than a square.
but then again it especially said its no going to break apps.
Click to expand...
Click to collapse
I did not really get what you wanted to say with this.
just a question, what would be a good way to verify it is working like its supposed to?
Click to expand...
Click to collapse
You can check for example all outgoing connections to the internet from your device. I have not tested this tool, or similar like that, but i will now because i just had the idea Else you can also prevent Facebook app to connect. I use Auto Hide Softkey App. I can for example prevent that it uses the overlay function, so it can not modify the UI and hide the Navbar.
Xprivacy is a very powerful tool. If you want it more simple, you can activate the in Android but Disabled inbuilt AppOPS App (search for AppOPS). But it is also less powerful.
I bought xprivacy. If you buy it, you can download the restrictions automatically and upload yours for others. You are also able to export end import the settings if licensed. Also nice that you can buy it via Paypal because i do not have a Credit Card (and i don't want).
but google-ing 'clock app' wasnt the most helpful thing i've ever done ^^
Click to expand...
Click to collapse
You should definitely work on your Googling skills
Try "best android clock apps" "List of android clocks" and so on, there are dozens.
maybe there is even the possibility to install a stable version of cyanogenmod on the moto g which would solve most of my issues? but since this is running so smoothly i dont want any nightly builds, alphas or betas on this thing right now...
Click to expand...
Click to collapse
My friend, you are really funny
Cyanogenmod just got a snapshot Status few days ago. It is one step ahead being a nightly and to steps behind beeing stable
Hope that helps.
---------- Post added at 10:06 PM ---------- Previous post was at 10:04 PM ----------
Oh and for some settings you do you also have to restart your phone. But actually it will tell you to do so by displaying a toast.
mokkami said:
I just tried it and i had no problem to deny the access for Firefox. When you open xprivacy in the app list tap on the Firefox Logo, not on the name or the checkbox. If you do so the details will open. If you now tick the category "Internet" then you will see that it is checked as a square, not as a hook. If it is a square it is only partially blocked. If you go now into the details of the category "Internet", you will see, that not all options are checked. Some are even marked red because they might be essential for the functionalty of the specific app. If you check also these and maybe also all others, then you can prevent Firefox of getting access to the Internet. If you check all items in Internet manually you'll see that category internet has now a hook than a square.
Click to expand...
Click to collapse
thanks for the explanation! i clicked on the firefox logo but i didnt know you can go even deeper into each section for permissions, that explains it!
mokkami said:
I did not really get what you wanted to say with this.
Click to expand...
Click to collapse
well you explained it yourself pretty much, the app was designed to not break apps in the way they work but restrict them from your privat data. so when i clicked firefox'es internet permission and it had the square, i disabled some but not all of it. thats all i was saying
mokkami said:
You can check for example all outgoing connections to the internet from your device. I have not tested this tool, or similar like that, but i will now because i just had the idea Else you can also prevent Facebook app to connect. I use Auto Hide Softkey App. I can for example prevent that it uses the overlay function, so it can not modify the UI and hide the Navbar.
Xprivacy is a very powerful tool. If you want it more simple, you can activate the in Android but Disabled inbuilt AppOPS App (search for AppOPS). But it is also less powerful.
I bought xprivacy. If you buy it, you can download the restrictions automatically and upload yours for others. You are also able to export end import the settings if licensed. Also nice that you can buy it via Paypal because i do not have a Credit Card (and i don't want).
Click to expand...
Click to collapse
thats good news i can buy it without credit card, i will consider it. that sounds like a real benefit you get for paying.
mokkami said:
You should definitely work on your Googling skills
Try "best android clock apps" "List of android clocks" and so on, there are dozens.
Hope that helps.
Click to expand...
Click to collapse
yea i ansered somewhere above that i have found the cLock app, or its successor. thanks nevertheless!
I don't know how to delete this post D:
You can not
mokkami said:
I bought xprivacy. If you buy it, you can download the restrictions automatically and upload yours for others. You are also able to export end import the settings if licensed. Also nice that you can buy it via Paypal because i do not have a Credit Card (and i don't want).
Click to expand...
Click to collapse
i wasnt on my computer for quiet some time so i couldnt answer on this thread, my apologies.
i bought the pro version of xprivacy with paypal too and i synced my permissions for all apps with the cloud or crowd. it could find and sync most of my apps which is a nice and easy way to get around the ridiculous amount of permissions to set for each app.
can you confirm that most of the synced crowd settings make sense in the way of privacy protection? because i havent looked too much into all those settings but even when i did i couldnt quiet understand them in depth...
also @Landrea thanks for recommending gravity box, that thing is amazing! i was able to restore most of the cyanogenmod settings i was missing, great! also i could reconfigure my softkeys, but i am thinking about this app here to maximize my usable screensize:
https://play.google.com/store/apps/details?id=com.gmd.hidesoftkeys
or
https://play.google.com/store/apps/details?id=de.tsorn.FullScreen
or is there a setting for that in gravity box i missed?
bad1080 said:
also @Landrea thanks for recommending gravity box, that thing is amazing! i was able to restore most of the cyanogenmod settings i was missing, great! also i could reconfigure my softkeys, but i am thinking about this app here to maximize my usable screensize:
https://play.google.com/store/apps/details?id=com.gmd.hidesoftkeys
or
https://play.google.com/store/apps/details?id=de.tsorn.FullScreen
or is there a setting for that in gravity box i missed?
Click to expand...
Click to collapse
You're welcome!
Check navigation bar settings in gravity box, you can change the size of the soft keys and gain space.
Go for that apps if you think you need more usable screensize (hard to believe)
Sent from my Commodore 64 using Videotel
bad1080 said:
i wasnt on my computer for quiet some time so i couldnt answer on this thread, my apologies.
i bought the pro version of xprivacy with paypal too and i synced my permissions for all apps with the cloud or crowd. it could find and sync most of my apps which is a nice and easy way to get around the ridiculous amount of permissions to set for each app.
can you confirm that most of the synced crowd settings make sense in the way of privacy protection? because i havent looked too much into all those settings but even when i did i couldnt quiet understand them in depth...
also @Landrea thanks for recommending gravity box, that thing is amazing! i was able to restore most of the cyanogenmod settings i was missing, great! also i could reconfigure my softkeys, but i am thinking about this app here to maximize my usable screensize:
https://play.google.com/store/apps/details?id=com.gmd.hidesoftkeys
or
https://play.google.com/store/apps/details?id=de.tsorn.FullScreen
or is there a setting for that in gravity box i missed?
Click to expand...
Click to collapse
Its called extended desktop in gravity box and you may see it called immersive mode in other roms it is all the same thing.
Landrea said:
Sent from my Commodore 64 using Videotel
Click to expand...
Click to collapse
thats a joke right? 0.o if not kudos! ^^
robin0800 said:
Its called extended desktop in gravity box and you may see it called immersive mode in other roms it is all the same thing.
Click to expand...
Click to collapse
i wondered what that would be and imagined something for screen transmission (chromecast) or something like that, thanks for clearing that up! best to have as little extra programs as needed on my device... cool gravity box got that covered aswel, liking this more and more!
In the English USER manual for the Mate 9, there is a section describing the SMART CONTROLLER ir remote controller application and how to use it. Its quite clear that for my Mate 9 that this application is NO WHERE to be found. I have this model: (6GB/128 GB Model MHA-AL00 / Build Number: MHA-AL00 C00B137). I have the 2 SIM version sold by a HK seller on eBay.
I was able to find and load the SMART CONTROLLER ir application (apk) for the Huawei P9 from another Huawei site online. There were a couple "wrong version for your device" messages during the install, but the app loaded and seems to function normally.
My questions...
- Has anyone else had this issue?
- Is there a version of this program specific for the Mate 9 I could get my hands on?
- What are others recommending as far as a ir remote control application?
Thanks to all.
onepiece said:
In the English USER manual for the Mate 9, there is a section describing the SMART CONTROLLER ir remote controller application and how to use it. Its quite clear that for my Mate 9 that this application is NO WHERE to be found. I have this model: (6GB/128 GB Model MHA-AL00 / Build Number: MHA-AL00 C00B137). I have the 2 SIM version sold by a HK seller on eBay.
I was able to find and load the SMART CONTROLLER ir application (apk) for the Huawei P9 from another Huawei site online. There were a couple "wrong version for your device" messages during the install, but the app loaded and seems to function normally.
My questions...
- Has anyone else had this issue?
- Is there a version of this program specific for the Mate 9 I could get my hands on?
- What are others recommending as far as a ir remote control application?
Thanks to all.
Click to expand...
Click to collapse
I'm using the same version as you and I have the app ir remote control.... It's working good but the learning function doesn't work almost all the time.... So don't worry download Anymote ir remote control and you will be very happy...
But you have to know that YES there is an app for ir remote
I think you can download it from Hiapp too if someone gives you the specific name from hiapp manage category... I can because I have deleted it
Thank you!
tsiglas said:
I'm using the same version as you and I have the app ir remote control.... It's working good but the learning function doesn't work almost all the time.... So don't worry download Anymote ir remote control and you will be very happy...
But you have to know that YES there is an app for ir remote
I think you can download it from Hiapp too if someone gives you the specific name from hiapp manage category... I can because I have deleted it
Click to expand...
Click to collapse
Thank you for the great tips!
Seems like the after market remote control apps are a better bet!
By the way...do you have the options to do WiFi calling on your phone? In the English manual its says its there, but its not present on my build.
onepiece said:
Thank you for the great tips!
Seems like the after market remote control apps are a better bet!
By the way...do you have the options to do WiFi calling on your phone? In the English manual its says its there, but its not present on my build.
Click to expand...
Click to collapse
I have never use WiFi call so if there is one I wouldn't know how to do it.... So ask someone else....
I personally disagree that a different IR app is better. The learning function doesn't work very well, but once you get it working, you can have it control anything. I've got my Mate 9 controlling my lighting, my TV (it's a strange brand so none of the apps know the codes for it, so I needed to use the learning function) and my air conditioner. It's pretty great.
duraaraa said:
I personally disagree that a different IR app is better. The learning function doesn't work very well, but once you get it working, you can have it control anything. I've got my Mate 9 controlling my lighting, my TV (it's a strange brand so none of the apps know the codes for it, so I needed to use the learning function) and my air conditioner. It's pretty great.
Click to expand...
Click to collapse
Why to get tired trying and trying... You delete this app and you install Anymote with learning function that works great
Is Anymote able to learn? Trying the free version, but it's telling me learning is not supported on my Porche Design Mate 9. Or do you mean Anymote Home?
The built-in IR app is working decently anyways, I just programmed it to control my pretty much unknown room Ventilator/Light and it seems to work just fine, first time I'm able to get a phone to control it, never found it in any app's database. Not the most fancy or flexible thing I've ever seen, but it gets the job done. As long as your real remote is sending a decent signal, it looks like the learning is pretty consistent.
Fafner76 said:
Is Anymote able to learn? Trying the free version, but it's telling me learning is not supported on my Porche Design Mate 9. Or do you mean Anymote Home?
The built-in IR app is working decently anyways, I just programmed it to control my pretty much unknown room Ventilator/Light and it seems to work just fine, first time I'm able to get a phone to control it, never found it in any app's database. Not the most fancy or flexible thing I've ever seen, but it gets the job done. As long as your real remote is sending a decent signal, it looks like the learning is pretty consistent.
Click to expand...
Click to collapse
No doesn't work you learning function in Anymote....
duraaraa said:
I personally disagree that a different IR app is better. The learning function doesn't work very well, but once you get it working, you can have it control anything. I've got my Mate 9 controlling my lighting, my TV (it's a strange brand so none of the apps know the codes for it, so I needed to use the learning function) and my air conditioner. It's pretty great.
Click to expand...
Click to collapse
Can you please take a copy of Huawei smart remote apk? I have deleted it and I want to have it as back up....it's not a system app so it must be easy.. Thanks
tsiglas said:
Can you please take a copy of Huawei smart remote apk? I have deleted it and I want to have it as back up....it's not a system app so it must be easy.. Thanks
Click to expand...
Click to collapse
Same here, i delete the smartcontroller.apk... (mate 9).. If someone can extract it from a mate 9 and post it.. I will be great for many user who deleted the apps..
Tx
druun said:
Same here, i delete the smartcontroller.apk... (mate 9).. If someone can extract it from a mate 9 and post it.. I will be great for many user who deleted the apps..
Tx
Click to expand...
Click to collapse
Extracted
https://mega.nz/#!A91UhBiR!4l1sXYiyfucwHKUibQRNifAy2Q8I7cFWbGj2gMzmkCs
5[Strogino] said:
Extracted
https://mega.nz/#!A91UhBiR!4l1sXYiyfucwHKUibQRNifAy2Q8I7cFWbGj2gMzmkCs
Click to expand...
Click to collapse
OK but I can't install it... When I try it says error something about signature...
Does anyone know how to install it without root?
I guess that a full system reset would restore all those preinstalled apps, I know this is a pain in the ... but it may be your only choice.
tsiglas said:
OK but I can't install it... When I try it says error something about signature...
Does anyone know how to install it without root?
Click to expand...
Click to collapse
It is a system app, you can't install it without root.