Database Info

[Bash] got bored? bash styles

i got bored looking at the standard # or $ in bash so modified my bashrc with something from bashstyle-ng.
does anyone else have a different bash? show it off!

replace /etc/bash/bashrc file with this one to get the same look
Code:
# /etc/bash/bashrc
#
# This file is sourced by all *interactive* bash shells on startup,
# including some apparently interactive shells such as scp and rcp
# that can't tolerate any output. So make sure this doesn't display
# anything or bad things will happen !
function pre_prompt {
newPWD="${PWD}"
user="whoami"
host=$(echo -n $HOSTNAME | sed -e "s/[\.].*//")
datenow=$(date "+%a, %d %b %y")
let promptsize=$(echo -n "+([email protected]$host ddd., DD mmm YY)(${PWD})+" \
| wc -c | tr -d " ")
let fillsize=${COLUMNS}-${promptsize}
fill=""
while [ "$fillsize" -gt "0" ]
do
fill="${fill}-"
let fillsize=${fillsize}-1
done
if [ "$fillsize" -lt "0" ]
then
let cutt=3-${fillsize}
newPWD="...$(echo -n $PWD | sed -e "s/\(^.\{$cutt\}\)\(.*\)/\2/")"
fi
}
# Test for an interactive shell. There is no need to set anything
# past this point for scp and rcp, and it's important to refrain from
# outputting anything in those cases.
if [[ $- != *i* ]] ; then
# Shell is non-interactive. Be done now!
return
fi
# Bash won't get SIGWINCH if another process is in the foreground.
# Enable checkwinsize so that bash will check the terminal size when
# it regains control. #65623
# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
shopt -s checkwinsize
# Enable history appending instead of overwriting. #139609
shopt -s histappend
use_color=false
# set some environment variables
HOME=/sdcard
TERM=linux
PROMPT_COMMAND=pre_prompt
export black="\[\033[0;38;5;0m\]"
export red="\[\033[0;38;5;1m\]"
export orange="\[\033[0;38;5;130m\]"
export green="\[\033[0;38;5;2m\]"
export yellow="\[\033[0;38;5;3m\]"
export blue="\[\033[0;38;5;4m\]"
export bblue="\[\033[0;38;5;12m\]"
export magenta="\[\033[0;38;5;55m\]"
export cyan="\[\033[0;38;5;6m\]"
export white="\[\033[0;38;5;7m\]"
export coldblue="\[\033[0;38;5;33m\]"
export smoothblue="\[\033[0;38;5;111m\]"
export iceblue="\[\033[0;38;5;45m\]"
export turqoise="\[\033[0;38;5;50m\]"
export smoothgreen="\[\033[0;38;5;42m\]"
case "$TERM" in
xterm)
PS1="$bblue+-($orange\[email protected]\h \$(date \"+%a, %d %b %y\")$bblue)-\${fill}-($orange\$newPWD\
$bblue)-+\n$bblue+-($orange\$(date \"+%H:%M\") \$$bblue)->$white "
;;
screen)
PS1="$bblue+-($orange\[email protected]\h \$(date \"+%a, %d %b %y\")$bblue)-\${fill}-($orange\$newPWD\
$bblue)-+\n$bblue+-($orange\$(date \"+%H:%M\") \$$bblue)->$white "
;;
*)
PS1="+-(\[email protected]\h \$(date \"+%a, %d %b %y\"))-\${fill}-(\$newPWD\
)-|\n+-(\$(date \"+%H:%M\") \$)-> "
;;
esac
# Set up a ton of aliases to cover toolbox with the nice busybox
# equivalents of its commands
for i in cat chmod chown df insmod ln lsmod mkdir mount mv rm rmdir rmmod umount; do
eval alias ${i}=\"busybox ${i}\"
done
unset i
alias ls='busybox ls --color=auto'
alias sysro='mount -o remount,ro /system'
alias sysrw='mount -o remount,rw /system'
# Try to keep environment pollution down, EPA loves us.
unset use_color safe_term match_lhs

overkill
x3maniac said:
i got bored looking at the standard # or $ in bash so modified my bashrc with something from bashstyle-ng.
does anyone else have a different bash? show it off!
Click to expand...
Click to collapse
Your prompt takes too much space, and it contains date + time, which are already shown on the screen (top and bottom).
Just make the prompt PS1='\e[34m\[email protected]\h:\w \$ \e[0m' so it's ready for cut&paste, e.g. when you're copying files with scp.

[Q] TechniPad - root ?

Hello
Is it possible that technipad (of technisat) to root? It is built a rockchip.
Thank you
Philip

Me too
Also trying to root this device. Tried many ways but cannot get through.
ADB root does not work - adbd cannot run as root in production builds
though adb shell get similar message as uid 2000 - cannot change to 0
Cannot use psneuter either.
Going round and round in circles, anyone with some help it would be appreciated.
Thanks,

Root checker results
Root Access is not properly configured or was not granted.
Super User Application Status:
SuperSU application - version 1.51 - is installed!
System File Properties for Root Access:
Standard Location
Check Command: ls -l /system/bin/su:
Result: /system/bin/su: No such file or directory
Analysis: File /system/bin/su does not exist.
Standard Location
Check Command: ls -l /system/xbin/su:
Result: -rwsr-sr-x root root 62932 2013-05-10 12:41 su
Analysis: Setuid attribute is present and root user ownership is present. Root access is correctly configured for this file! Executing this file can grant root access!
Alternative Location
Check Command: ls -l /sbin/su:
Result: /sbin/su: Permission denied
Analysis: File system permissions restricted and denied access.
Alternative Location
Check Command: ls -l /system/xbin/sudo:
Result: /system/xbin/sudo: No such file or directory
Analysis: File /system/xbin/sudo does not exist.
Root User ID and Group ID Status:
SU binary not found or not operating properly
System Environment PATH: /sbin /vendor/bin /system/sbin /system/bin /system/xbin
ADB Shell Default User:
ADB shell setting for standard access, stored in default.prop, is configured as: shell (non root) user - ro.secure=1
Results provided on your TechniPad 8 device by Root Checker Pro version 1.3.4 from joeykrim in the Android Market

Hello,
Have you found anything?
mfG
Philip

philidinator said:
Hello,
Have you found anything?
mfG
Philip
Click to expand...
Click to collapse
Nothing yet am afraid. It's a bit confusing at the device seems to think it is already rooted, but it isn't when you check for root capability. Am going to try something today - but it might end up making it a lovely paperweight. Will keep you posted.

Nothing new?
mfG
Philip

Rooted Technipad 8
philidinator said:
Nothing new?
mfG
Philip
Click to expand...
Click to collapse
SUCCESS!!
FOLLOW THE INSTRUCTIONS HERE AND ROOT ACCESS IS GRANTED - NOW TO FIND A CUSTOM ROM AND UPGRADE TO JB 4.2
JUST ROOTED MY TECHNIPAD 8 SO IF YOU NEED ANY HELP JUST ASK BUT THE INTRSUCTIONS WERE PRETTY SIMPLE TO FOLLOW.
GOOD LUCK! :good:
http://forum.xda-developers.com/showthread.php?t=2414994

I have a Technipad 10 and the rooting instructions mentioned above did not work unfortunately. Is anybody out there who know a possibilty to root this tablet?
For a little help, I would be very grateful.

Try this one:
https://github.com/Lostech/Root_Box/tree/V1.0
https://github.com/Lostech/Root_Box/archive/V1.0.zip
I made this based on other RK30 root´s for the TechniPad 10G with Android version 4.1.1 and build version GE.Technisat.S10_g.V107.

Calibaan said:
I made this based on other RK30 root´s for the TechniPad 10G with Android version 4.1.1 and build version GE.Technisat.S10_g.V107.
Click to expand...
Click to collapse
Hello Calibaan,
I’m thrilled, your program did work really well.
Thank you very much and have a nice weekend!

Technipad 7T
Hi,
i own a Technipad 7T and try to root it with Rootbox V1.1, but it wont work.
It has Android V4.2.2.
Any ideas why it wont work?

At which point does the root process fail?

I found Version 1.6 of root_box. but still no luck.
I use WinXp. Driver installation failed inside of root_box, so I installed the seperatly.
I failed doing the root.
Su was transfered to the root-dir.
After that I got a lot of "system/bin/su: rksu: not found" and "system/bin/su: suu: not found" and the Technipad is doing a reset.
But there is still no root-access or superuser installed.
Android-Info:
================
AndroidInfo V1.1
================
build.prop Inhalt:
------------------
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.display.id=GE.TechniPad.V1.07
ro.build.version.incremental=20140514
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Wed May 14 10:36:07 CST 2014
ro.build.date.utc=1400034967
ro.build.type=user
ro.build.user=liuyang
ro.build.host=swubuntu
ro.build.tags=test-keys
ro.product.model=TechniPad_7T
ro.product.brand=MID
ro.product.name=TPad_7T
ro.product.device=TechniPad_7T
ro.product.board=TPad_7T
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=TechniSat
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=13
ro.board.platform=meson6
# ro.build.product is obsolete; use ro.product.device
ro.build.product=TPad_7T
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=g17refm170m-user 4.2.2 JDQ39 20140514 test-keys
ro.build.fingerprint=MID/g17refm170m/g17refm170m:4.2.2/JDQ39/20140514:user/test-keys
ro.build.characteristics=tablet,nosdcard
# end build properties
ro.sf.lcd_density=160
keyguard.no_require_sim=1
#set keyguard.enable=false to disable keyguard
keyguard.enable=true
ro.statusbar.widget=true
ro.statusbar.button=true
ro.statusbar.yearmonthdayweek=true
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
#wifi.supplicant_scan_interval = 60
#alsa.mixer.playback.master=DAC2 Analog
#alsa.mixer.capture.master=Analog
hwui.render_dirty_regions=false
# Disable un-supported Android feature
hw.nopm=false
hw.nobattery=false
hw.nophone=false
hw.novibrate=true
hw.hasethernet=true
#hw.hasdata=true
ro.platform.has.touch=true
#set to 0 temporarily so touch works without other changes
ro.sf.hwrotation=0
# Use OSD2 mouse patch
ro.ui.cursor=osd2
ro.hardware=amlogic
sys.fb.bits=32
# Disable GPS
gps.enable=true
# Enable player buildin
media.amsuperplayer.enable=true
media.amplayer.enable-acodecs=ape,flac,dts
media.amplayer.enable=true
media.amsuperplayer.m4aplayer=STAGEFRIGHT_PLAYER
media.amsuperplayer.defplayer=PV_PLAYER
media.amplayer.thumbnail=true
#media.amplayer.widevineenable=true
media.amplayer.startmode=true
media.arm.audio.decoder=ape,ac3,eac3
# Nand write need force sync when gadget
gadget.nand.force_sync=true
# Status bar customization
ro.statusbar.widget.power=true
ro.statusbar.yearmonthdayweek=true
#support rotation btn for apk compatibility,set true btn useful
sys.rotation.settings=false
# HDMI
ro.hdmi480p.enable=false
#rw.fb.need2xscale=ok
#media.amplayer.osd2xenable=true
#Configure the dtv standard, can only be DVB,ATSC
dtv.standard=DVB
dtv.deinterlace.disable=true
dtv.transmission=3
audio.policy.digital.fixed=false
# App optimization
ro.app.optimization=true
#Dual display
ro.vout.dualdisplay3=true
ro.vout.player.exit=false
# CPU settings
ro.has.cpu.setting=true
# CPU freq customized in setting menu
# normal, performance, powersaving
ro.cpumode.maxfreq=1200000,1512000,800000
# when usbstorage, CPU mode and freq
ro.usbstorage.cpumode=performance
ro.usbstorage.maxfreq=600000
#ro.bootanimation.rotation=180
persist.service.adb.enable=0
#used to set default surface size, set 1 when hwrotation is 270, set 3 when hwrotation is 90;need set ro.bootanimation.rotation 0;
#debug.default.dimention=1
#support media poll uevent,can use sd cardread on usb port
#has.media.poll=false
has.media.poll=true
#used forward seek for libplayer
media.libplayer.seek.fwdsearch=1
#enable address bar cover issue fixing
ro.flashplayer.surfacehack=1
#fix hls sync
libplayer.livets.softdemux=1
libplayer.netts.recalcpts=1
#map volume
ro.audio.mapvalue=0,0,0,0
ro.media.partition.label=TechniPad7T
hw.has.bluetooth=true
#screenshot icon in status bar
ro.statusbar.screenshot=true
#vol + - icon in status bar
ro.statusbar.volume=true
#set HDMI ratation
#hdmi.hdmirotation=2
#systemui interval
rw.systemui.interval=40
media.libplayer.modules=vhls_mod
#for tabletui display
#ro.ui.tabletui=true
#skyworth Modify default language/country/timezone.
persist.sys.timezone=Europe/Berlin
persist.sys.language=de
persist.sys.country=De
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.opengles.version=131072
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=384m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
wifi.interface=wlan0
gps.enable=false
hw.cameras=2
ro.camera.orientation.front=270
ro.camera.orientation.back=90
rw.sensors.gsensor.installdir=0110
ro.app.optimization=true
drm.service.enable=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
/bin Verzeichnis:
------------------------
/bin//bin: No such file or directory
/sbin Verzeichnis:
-------------------------
/sbin/opendir failed, Permission denied
/xbin Verzeichnis:
------------------------
/xbin//xbin: No such file or directory
/system/bin Verzeichnis:
------------------------
/system/bin/AmlHostsTool
/system/bin/abcc
/system/bin/adb
/system/bin/am
/system/bin/app_process
/system/bin/applypatch
/system/bin/atrace
/system/bin/bmgr
/system/bin/bootanimation
/system/bin/bu
/system/bin/bugreport
/system/bin/cat
/system/bin/chat
/system/bin/chmod
/system/bin/chown
/system/bin/cmp
/system/bin/content
/system/bin/cp
/system/bin/curl
/system/bin/dalvikvm
/system/bin/date
/system/bin/dbus-daemon
/system/bin/dd
/system/bin/debuggerd
/system/bin/dexopt
/system/bin/df
/system/bin/dhcpcd
/system/bin/dhd
/system/bin/dig
/system/bin/dmesg
/system/bin/dnsmasq
/system/bin/drmserver
/system/bin/du
/system/bin/dumpstate
/system/bin/dumpsys
/system/bin/fsck.exfat
/system/bin/fsck_msdos
/system/bin/getevent
/system/bin/getprop
/system/bin/glgps
/system/bin/grep
/system/bin/gzip
/system/bin/hd
/system/bin/hostapd
/system/bin/id
/system/bin/ifconfig
/system/bin/iftop
/system/bin/ime
/system/bin/init-pppd.sh
/system/bin/input
/system/bin/insmod
/system/bin/installd
/system/bin/ioctl
/system/bin/ionice
/system/bin/ip
/system/bin/ip6tables
/system/bin/iptables
/system/bin/keystore
/system/bin/kill
/system/bin/linker
/system/bin/ln
/system/bin/log
/system/bin/logcat
/system/bin/logwrapper
/system/bin/ls
/system/bin/lsmod
/system/bin/lsof
/system/bin/make_ext4fs
/system/bin/md5
/system/bin/mdnsd
/system/bin/mediaserver
/system/bin/mkdir
/system/bin/mksh
/system/bin/monkey
/system/bin/mount
/system/bin/mount.exfat
/system/bin/mtpd
/system/bin/mv
/system/bin/nandread
/system/bin/ndc
/system/bin/netcfg
/system/bin/netd
/system/bin/netstat
/system/bin/newfs_msdos
/system/bin/notify
/system/bin/ntfs-3g
/system/bin/ping
/system/bin/pm
/system/bin/pppd
/system/bin/printenv
/system/bin/ps
/system/bin/racoon
/system/bin/reboot
/system/bin/renice
/system/bin/requestsync
/system/bin/rild
/system/bin/rm
/system/bin/rmdir
/system/bin/rmmod
/system/bin/route
/system/bin/run-as
/system/bin/schedtest
/system/bin/schedtop
/system/bin/screencap
/system/bin/screenshot
/system/bin/sdcard
/system/bin/sendevent
/system/bin/sensorcalibrate
/system/bin/sensorservice
/system/bin/service
/system/bin/servicemanager
/system/bin/set_display_mode.sh
/system/bin/setconsole
/system/bin/setprop
/system/bin/settings
/system/bin/setup_fs
/system/bin/sh
/system/bin/sky_remount
/system/bin/sky_sudo
/system/bin/sleep
/system/bin/smd
/system/bin/start
/system/bin/stop
/system/bin/surfaceflinger
/system/bin/svc
/system/bin/sync
/system/bin/system_key_server
/system/bin/system_server
/system/bin/tc
/system/bin/tinycap
/system/bin/tinymix
/system/bin/tinyplay
/system/bin/toolbox
/system/bin/top
/system/bin/touch
/system/bin/uiautomator
/system/bin/umount
/system/bin/uptime
/system/bin/usb_modeswitch
/system/bin/usbpower
/system/bin/usbtestpm
/system/bin/vdc
/system/bin/vmstat
/system/bin/vold
/system/bin/watchprops
/system/bin/wififix.sh
/system/bin/wipe
/system/bin/wl
/system/bin/wpa_supplicant
/system/sbin Verzeichnis:
-------------------------
/system/sbin//system/sbin: No such file or directory
/system/xbin Verzeichnis:
------------------------
/system/xbin/[
/system/xbin/[[
/system/xbin/adjtimex
/system/xbin/arp
/system/xbin/ash
/system/xbin/awk
/system/xbin/base64
/system/xbin/basename
/system/xbin/bbconfig
/system/xbin/blkid
/system/xbin/blockdev
/system/xbin/brctl
/system/xbin/bunzip2
/system/xbin/busybox
/system/xbin/bzcat
/system/xbin/bzip2
/system/xbin/cal
/system/xbin/cat
/system/xbin/catv
/system/xbin/chattr
/system/xbin/chgrp
/system/xbin/chmod
/system/xbin/chown
/system/xbin/chroot
/system/xbin/clear
/system/xbin/cmp
/system/xbin/comm
/system/xbin/cp
/system/xbin/cpio
/system/xbin/crond
/system/xbin/crontab
/system/xbin/cut
/system/xbin/date
/system/xbin/dc
/system/xbin/dd
/system/xbin/depmod
/system/xbin/devmem
/system/xbin/dexdump
/system/xbin/df
/system/xbin/diff
/system/xbin/dirname
/system/xbin/dmesg
/system/xbin/dnsd
/system/xbin/dos2unix
/system/xbin/du
/system/xbin/echo
/system/xbin/ed
/system/xbin/egrep
/system/xbin/env
/system/xbin/expand
/system/xbin/expr
/system/xbin/false
/system/xbin/fbset
/system/xbin/fbsplash
/system/xbin/fdisk
/system/xbin/fgrep
/system/xbin/find
/system/xbin/flash_lock
/system/xbin/flash_unlock
/system/xbin/flashcp
/system/xbin/flock
/system/xbin/fold
/system/xbin/free
/system/xbin/freeramdisk
/system/xbin/fstrim
/system/xbin/fsync
/system/xbin/ftpget
/system/xbin/ftpput
/system/xbin/fuser
/system/xbin/getopt
/system/xbin/grep
/system/xbin/groups
/system/xbin/gunzip
/system/xbin/gzip
/system/xbin/halt
/system/xbin/head
/system/xbin/hexdump
/system/xbin/id
/system/xbin/ifconfig
/system/xbin/inetd
/system/xbin/insmod
/system/xbin/install
/system/xbin/ionice
/system/xbin/iostat
/system/xbin/ip
/system/xbin/kill
/system/xbin/killall
/system/xbin/killall5
/system/xbin/less
/system/xbin/ln
/system/xbin/losetup
/system/xbin/ls
/system/xbin/lsattr
/system/xbin/lsmod
/system/xbin/lsof
/system/xbin/lsusb
/system/xbin/lzcat
/system/xbin/lzma
/system/xbin/lzop
/system/xbin/lzopcat
/system/xbin/man
/system/xbin/md5sum
/system/xbin/mesg
/system/xbin/mkdir
/system/xbin/mkdosfs
/system/xbin/mke2fs
/system/xbin/mkfifo
/system/xbin/mkfs.ext2
/system/xbin/mkfs.vfat
/system/xbin/mknod
/system/xbin/mkswap
/system/xbin/mktemp
/system/xbin/modinfo
/system/xbin/modprobe
/system/xbin/more
/system/xbin/mount
/system/xbin/mountpoint
/system/xbin/mpstat
/system/xbin/mv
/system/xbin/nanddump
/system/xbin/nandwrite
/system/xbin/nbd-client
/system/xbin/netstat
/system/xbin/nice
/system/xbin/nohup
/system/xbin/nslookup
/system/xbin/ntpd
/system/xbin/od
/system/xbin/patch
/system/xbin/pgrep
/system/xbin/pidof
/system/xbin/ping
/system/xbin/pipe_progress
/system/xbin/pkill
/system/xbin/pmap
/system/xbin/poweroff
/system/xbin/printenv
/system/xbin/printf
/system/xbin/ps
/system/xbin/pstree
/system/xbin/pwd
/system/xbin/pwdx
/system/xbin/rdev
/system/xbin/readlink
/system/xbin/realpath
/system/xbin/reboot
/system/xbin/renice
/system/xbin/reset
/system/xbin/resize
/system/xbin/rev
/system/xbin/rm
/system/xbin/rmdir
/system/xbin/rmmod
/system/xbin/route
/system/xbin/run-parts
/system/xbin/rx
/system/xbin/sed
/system/xbin/seq
/system/xbin/setconsole
/system/xbin/setserial
/system/xbin/setsid
/system/xbin/sh
/system/xbin/sha1sum
/system/xbin/sha256sum
/system/xbin/sha3sum
/system/xbin/sha512sum
/system/xbin/sleep
/system/xbin/sort
/system/xbin/split
/system/xbin/stat
/system/xbin/strings
/system/xbin/stty
/system/xbin/sum
/system/xbin/swapoff
/system/xbin/swapon
/system/xbin/sync
/system/xbin/sysctl
/system/xbin/tac
/system/xbin/tail
/system/xbin/tar
/system/xbin/taskset
/system/xbin/tee
/system/xbin/telnet
/system/xbin/telnetd
/system/xbin/test
/system/xbin/tftp
/system/xbin/tftpd
/system/xbin/time
/system/xbin/timeout
/system/xbin/top
/system/xbin/touch
/system/xbin/tr
/system/xbin/traceroute
/system/xbin/true
/system/xbin/ttysize
/system/xbin/tune2fs
/system/xbin/umount
/system/xbin/uname
/system/xbin/uncompress
/system/xbin/unexpand
/system/xbin/uniq
/system/xbin/unix2dos
/system/xbin/unlzma
/system/xbin/unlzop
/system/xbin/unxz
/system/xbin/unzip
/system/xbin/uptime
/system/xbin/usleep
/system/xbin/uudecode
/system/xbin/uuencode
/system/xbin/vi
/system/xbin/watch
/system/xbin/wc
/system/xbin/wget
/system/xbin/whoami
/system/xbin/xargs
/system/xbin/xz
/system/xbin/xzcat
/system/xbin/yes
/system/xbin/zcat
Potentielle SuperUser Dateien:
------------------------------
/system/bin/surfaceflinger -> (su)rfaceflinger
/system/xbin/sum -> (su)m

You´re using the "T" Variant of the TechniPad which is different to the regular TechniPad´s. I didn´t have one of these but it seems that the regular Rockchip root for Android 4.1/4.2 does not work on this variant like on the other TechniPads. But since you do have Android V4.2.2 installed there is still the chance that rooting is possible with the TowelRoot method (menu entry 3 within the RootBox 1.6 or take the APK from the original TowelRoot creator GeoHot @ https://towelroot.com/). So I assume to give TowelRoot a try.

I tried Towelroot but still no luck. Startet it, make it rain and it shows "this phone isnt currently supported".

It seems that this TechniPad model is very different to the other models and I have no clue what could work for it. So in this case I can´t help you any further, sorry.

Thanx for your help.

Reverse tethering.. it works but no DNS!

I've a Samsung S5 with CM12.1 + FakeWifi (Xposed).
I use the following script to reverse tether with ubuntu.
Code:
#!/bin/bash
ADB="adb"
# We need root on the host to mess with networking
if [[ $(whoami) != "root" ]]; then
echo "You must be root to run this script!"
exit 1
fi;
# We need root on the device to mess with networking
$ADB -d root
# Keep NetworkManager from messing with the adapter
grep 'usb0 inet manual' /etc/network/interfaces
if [ ! $? ]; then
echo 'Configuring usb0 for manual control'
echo 'iface usb0 inet manual' >> /etc/network/interfaces
restart network-manager
fi
echo 'Setting up usb networking on device'
$ADB -d shell 'ip addr add 192.168.200.2/30 dev rndis0;\
ip link set rndis0 up; \
ip route delete default; \
ip route add default via 192.168.200.1; \
setprop net.dns1 192.168.200.1'
echo 'Setting up usb interface on the host'
ip addr flush dev usb0
ip addr add 192.168.200.1/30 dev usb0
ip link set usb0 up
# Turn off the firewall if one is active
echo 'Checking for ufw firewall'
which ufw && ufw status || ufw disable
echo 'Enabling NAT and IP Forwarding'
# Start forwarding and nat (use existing default gw)
iptables -F -t nat
iptables -A POSTROUTING -t nat -j MASQUERADE
echo 1 > /proc/sys/net/ipv4/ip_forward
echo 'Starting dnsmasq'
dnsmasq --interface=usb0 --no-dhcp-interface=usb0
echo 'Connection is active! Press any key to shutdown.'
read
echo 'Attempting to shut down reverse tethering'
killall dnsmasq
ip link set usb0 down
iptables -F -t nat
echo 0 > /proc/sys/net/ipv4/ip_forward
echo 'Disabling usb networking on host'
$ADB shell ip route delete default
echo 'Disable and re-enable Wifi to return the device to normal'
Now the problem is that if I ping a public IP it works, but if I ping or curl the corresponding domain it fails "unknown host", "could not resolve".
What the heck should I do in order to make DNS working?
Thanks a lot for your help

Tsktsk said:
I've a Samsung S5 with CM12.1 + FakeWifi (Xposed).
I use the following script to reverse tether with ubuntu.
Code:
#!/bin/bash
ADB="adb"
# We need root on the host to mess with networking
if [[ $(whoami) != "root" ]]; then
echo "You must be root to run this script!"
exit 1
fi;
# We need root on the device to mess with networking
$ADB -d root
# Keep NetworkManager from messing with the adapter
grep 'usb0 inet manual' /etc/network/interfaces
if [ ! $? ]; then
echo 'Configuring usb0 for manual control'
echo 'iface usb0 inet manual' >> /etc/network/interfaces
restart network-manager
fi
echo 'Setting up usb networking on device'
$ADB -d shell 'ip addr add 192.168.200.2/30 dev rndis0;\
ip link set rndis0 up; \
ip route delete default; \
ip route add default via 192.168.200.1; \
setprop net.dns1 192.168.200.1'
echo 'Setting up usb interface on the host'
ip addr flush dev usb0
ip addr add 192.168.200.1/30 dev usb0
ip link set usb0 up
# Turn off the firewall if one is active
echo 'Checking for ufw firewall'
which ufw && ufw status || ufw disable
echo 'Enabling NAT and IP Forwarding'
# Start forwarding and nat (use existing default gw)
iptables -F -t nat
iptables -A POSTROUTING -t nat -j MASQUERADE
echo 1 > /proc/sys/net/ipv4/ip_forward
echo 'Starting dnsmasq'
dnsmasq --interface=usb0 --no-dhcp-interface=usb0
echo 'Connection is active! Press any key to shutdown.'
read
echo 'Attempting to shut down reverse tethering'
killall dnsmasq
ip link set usb0 down
iptables -F -t nat
echo 0 > /proc/sys/net/ipv4/ip_forward
echo 'Disabling usb networking on host'
$ADB shell ip route delete default
echo 'Disable and re-enable Wifi to return the device to normal'
Now the problem is that if I ping a public IP it works, but if I ping or curl the corresponding domain it fails "unknown host", "could not resolve".
What the heck should I do in order to make DNS working?
Thanks a lot for your help
Click to expand...
Click to collapse
Hi! Unfortunately, I have no idea on how to fix these issues, but if you'd be willing to try a different reverse tethering solution, you might want to try ReverseTethering NoRoot, an app I have developed. I have opened a dedicated thread over here: http://forum.xda-developers.com/android/apps-games/app-reversetethering-noroot-t3316716

Tsktsk said:
I've a Samsung S5 with CM12.1 + FakeWifi (Xposed).
I use the following script to reverse tether with ubuntu.
Code:
#!/bin/bash
ADB="adb"
# We need root on the host to mess with networking
if [[ $(whoami) != "root" ]]; then
echo "You must be root to run this script!"
exit 1
fi;
# We need root on the device to mess with networking
$ADB -d root
# Keep NetworkManager from messing with the adapter
grep 'usb0 inet manual' /etc/network/interfaces
if [ ! $? ]; then
echo 'Configuring usb0 for manual control'
echo 'iface usb0 inet manual' >> /etc/network/interfaces
restart network-manager
fi
echo 'Setting up usb networking on device'
$ADB -d shell 'ip addr add 192.168.200.2/30 dev rndis0;\
ip link set rndis0 up; \
ip route delete default; \
ip route add default via 192.168.200.1; \
setprop net.dns1 192.168.200.1'
echo 'Setting up usb interface on the host'
ip addr flush dev usb0
ip addr add 192.168.200.1/30 dev usb0
ip link set usb0 up
# Turn off the firewall if one is active
echo 'Checking for ufw firewall'
which ufw && ufw status || ufw disable
echo 'Enabling NAT and IP Forwarding'
# Start forwarding and nat (use existing default gw)
iptables -F -t nat
iptables -A POSTROUTING -t nat -j MASQUERADE
echo 1 > /proc/sys/net/ipv4/ip_forward
echo 'Starting dnsmasq'
dnsmasq --interface=usb0 --no-dhcp-interface=usb0
echo 'Connection is active! Press any key to shutdown.'
read
echo 'Attempting to shut down reverse tethering'
killall dnsmasq
ip link set usb0 down
iptables -F -t nat
echo 0 > /proc/sys/net/ipv4/ip_forward
echo 'Disabling usb networking on host'
$ADB shell ip route delete default
echo 'Disable and re-enable Wifi to return the device to normal'
Now the problem is that if I ping a public IP it works, but if I ping or curl the corresponding domain it fails "unknown host", "could not resolve".
What the heck should I do in order to make DNS working?
Thanks a lot for your help
Click to expand...
Click to collapse
Hi did you end up resolving this issue? I have the exact same problem. Can ping any site but DNS lookup fails. Then I installed DNSsetter app which allows me to change the dns server. Now I can do DNS lookups and it resolves correctly but none of the apps do not appear to be aware of the fact that the phone is using reverse USB tethering.

SSHD problem (cm13)

Hi,
sshd won't work on my Moto G (Falcon) with CM13
Can anyone help me?
Logcat:
Code:
07-17 00:42:25.618 24464 24464 I /system/bin/sshd: Server listening on :: port 22.
07-17 00:42:25.618 24464 24464 I /system/bin/sshd: Server listening on 0.0.0.0 port 22.
07-17 00:42:28.787 24492 24492 E /system/bin/sshd: error: Could not load host key: /data/ssh/ssh_host_dsa_key
07-17 00:42:28.792 24492 24492 I /system/bin/sshd: WARNING: /data/ssh/moduli does not exist, using fixed modulus
07-17 00:42:28.901 218 218 F DEBUG : pid: 24493, tid: 24493, name: sshd >>> /system/bin/sshd: [net] <<<
07-17 00:42:28.938 218 218 F DEBUG : #10 pc 0000cdc9 /system/bin/sshd
07-17 00:42:28.938 218 218 F DEBUG : #13 pc 00020d6f /system/bin/sshd
07-17 00:42:28.938 218 218 F DEBUG : #15 pc 000073e4 /system/bin/sshd
07-17 00:42:28.989 24492 24492 E /system/bin/sshd: error: mm_request_receive: socket closed
/data/ssh:
Code:
drw------- 2 root shell 4096 1970-01-01 05:49 empty
-rw------- 1 root root 672 2016-07-17 01:01 ssh_host_dsa_key
-rw-r--r-- 1 root root 604 2016-07-17 01:01 ssh_host_dsa_key.pub
-rw------- 1 root root 1675 2016-07-17 01:01 ssh_host_rsa_key
-rw-r--r-- 1 root root 396 2016-07-17 01:01 ssh_host_rsa_key.pub
-rw------- 1 root root 5 2016-07-17 01:11 sshd.pid
-rw------- 1 root root 3330 2016-07-17 00:00 sshd_config
sshd_config:
Code:
# $OpenBSD: sshd_config,v 1.84 2011/05/23 03:30:07 djm Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
HostKey /data/ssh/ssh_host_rsa_key
HostKey /data/ssh/ssh_host_dsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#RSAAuthentication yes
PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile /data/ssh/authorized_keys
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
PermitEmptyPasswords no
# Change to no to disable s/key passwords
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
#UsePAM no
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
PidFile /data/ssh/sshd.pid
#MaxStartups 10
#PermitTunnel no
#ChrootDirectory none
# no default banner path
Banner /data/ssh/banner
# override default of no subsystems
Subsystem sftp internal-sftp
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
/data/local/userinit.d/99sshd:
Code:
#!/system/bin/sh
umask 077
# DEBUG=1
DSA_KEY=/data/ssh/ssh_host_dsa_key
DSA_PUB_KEY=/data/ssh/ssh_host_dsa_key.pub
RSA_KEY=/data/ssh/ssh_host_rsa_key
RSA_PUB_KEY=/data/ssh/ssh_host_rsa_key.pub
AUTHORIZED_KEYS=/data/ssh/authorized_keys
DEFAULT_AUTHORIZED_KEYS=/system/etc/security/authorized_keys.default
if [ ! -f $DSA_KEY ]; then
/system/bin/ssh-keygen -t dsa -f $DSA_KEY -N ""
chmod 600 /$DSA_KEY
chmod 644 $DSA_PUB_KEY
fi
if [ ! -f $RSA_KEY ]; then
/system/bin/ssh-keygen -t rsa -f $RSA_KEY -N ""
chmod 600 /$RSA_KEY
chmod 644 $RSA_PUB_KEY
fi
if [[ ! -f $AUTHORIZED_KEYS && -f $DEFAULT_AUTHORIZED_KEYS ]]; then
cat $DEFAULT_AUTHORIZED_KEYS > $AUTHORIZED_KEYS
fi
if [ "1" == "$DEBUG" ] ; then
# run sshd in debug mode and capture output to logcat
/system/bin/logwrapper /system/bin/sshd -f /data/ssh/sshd_config -D -d
else
# don't daemonize - otherwise we can't stop the sshd service
/system/bin/sshd -f /data/ssh/sshd_config -D
fi
Thanks in advance
Post on cyanogenmod forum:
https://forum.cyanogenmod.org/topic/127039-sshd-problem-cm13/#comment-603490

Rooting the webOS TV

pivotce.com informs that instructions have been published on gaining root access to a webOS TV. This is much harder than on the old phones and tablets. When this was done on legacy webOS, there was a wave of enhancements and tweaks made available to phone users from webOS Internals and other developers.
The instructions can be found on the Russian webOS forums here: webos-forums.ru/topic4650.html (English Translation via Google).
As the thread itself notes, this creates the possibility of fiddling with your TV in a way that may turn it into a large, thin brick and will almost certainly invalidate your warranty. The general user should stay well clear of this.
pivotCE published this for information only and recommend leaving investigations to those who know what they are doing or who can afford to wreck expensive television sets. We will watch to see if anything interesting emerges from this development.
+
Detailed analysis of the root access method described above:
forums.webosnation.com/lg-webos-tv/331754-pivotce-seems-webos-tv-has-been-rooted.html#post3450911

Hello!
I'm from webos-forums.ru. I've root on TV for a while and can help you with translation or testing on LG webOS 1.4.

rooting
I could use your help rooting my lg 65uf6450-ua if you would. Thank you

Root webOS
Hodizzal said:
I could use your help rooting my lg 65uf6450-ua if you would. Thank you
Click to expand...
Click to collapse
1. You need to install Developer Mode App and export private ssh-key with CLI (webostv.developer.lge.com/develop/app-test)
2. Convert private ssh-key with puttygen [import key <your private ssh-key>, then save private key]
3. Download exploit (zalil.su/6937580), then connect with TV User: prisoner, [<ip-tv>:9922] + private-key with WinSCP (or other SCP-client), upload to /media/developer on TV and rename it to root.
on linux
Code:
ssh -i <your private ssh-key> [email protected]<ip-tv> -p 9922 "/bin/sh -i"
4.
Code:
chmod +x root
Code:
./root
5. After try install any app from market go to LG App Store and try to install any app.
6. if third stage ok. the insert password 1111 as said.
7.
Code:
busybox chroot /proc/1/root
Code:
[email protected]tTV:/# id
Code:
uid=0(root) gid=0(root)........
I personally use Linux Subsystem on Windows 10 for all of this.
To install .ipk app:
Code:
ApplicationInstallerUtility -c install -p /tmp/<any-name>.ipk -u 0 -l /media/developer -d
Info about your linux kernel and TV firmware:
Code:
luna-send -n 1 -f luna://com.palm.systemservice/osInfo/query '{ "subscribe": false }'
Launch app:
Code:
luna-send -n 1 -f luna://com.webos.applicationManager/launch '{"id": "netflix"}'
All apps ID you can find with
Code:
luna-send -n 1 "palm://com.palm.applicationManager/listLaunchPoints" "{}"
or at a folder /media/cryptofs/apps/usr/palm/applications/<App ID>/appinfo.json
For permanent root access through telnet:
1)
Code:
[email protected]:/# mkdir -p /media/cryptofs/root/etc
2)
Code:
[email protected]:/# cp -r /etc/* /media/cryptofs/root/etc
3)
Code:
[email protected]:/# mount -o bind /media/cryptofs/root/etc /etc
4)
Code:
[email protected]:/# passwd root
Enter any new root password
5)
Code:
cp /media/cryptofs/apps/usr/palm/services/com.palmdts.devmode.service/start-devmode.sh /tmp/start-devmode.sh
6) Download with WinSCP start-devmode.sh and edit it locally.
You need to add at the beginning
Code:
mount -o bind /media/cryptofs/root/etc /etc
telnetd -l /sbin/sulogin &
Plus you can add the line to launch any App at start, e.g:
Code:
luna-send -n 1 -f luna://com.webos.applicationManager/launch '{"id": "netflix", "params":{}}'
And comment Dev Mode online check.
Here it's mine start-devmode.sh. It's for webOS 1.4. It can be different for other webOS versions:
Code:
#!/bin/sh
mount -o bind /media/cryptofs/root/etc /etc
telnetd -l /sbin/sulogin &
#luna-send -n 1 -f luna://com.webos.applicationManager/launch '{"id": "netflix", "params":{}}'
# FIXME: disable this to turn off script echo
set -x
# FIXME: disable this to stop script from bailing on error
# set -e
# TODO: Check upstart daemon/process tracking (do we need to change /etc/init/devmode.conf? start sshd as daemon?)
# set devmode ssh port here
SSH_PORT="9922"
# set arch:
ARCH="armv71"
grep -qs "qemux86" /etc/hostname && ARCH="i686"
# set directories
OPT_DEVMODE="/opt/devmode"
OPT_SSH="/opt/openssh"
DEVELOPER_HOME="/media/developer"
DEVMODE_SERVICE_DIR="/media/cryptofs/apps/usr/palm/services/com.palmdts.devmode.service"
CRYPTO_SSH="$DEVMODE_SERVICE_DIR/binaries-${ARCH}/opt/openssh"
CRYPTO_OPT="$DEVMODE_SERVICE_DIR/binaries-${ARCH}/opt"
if [ -s ${DEVMODE_SERVICE_DIR}/jail_app.conf ] ; then
mv ${DEVMODE_SERVICE_DIR}/jail_app.conf ${DEVELOPER_HOME}
mv ${DEVMODE_SERVICE_DIR}/jail_app.conf.sig ${DEVELOPER_HOME}
fi
if [ -r ${DEVMODE_SERVICE_DIR}/sessionToken ] ; then
mv -f ${DEVMODE_SERVICE_DIR}/sessionToken /var/luna/preferences/devmode_enabled
fi
# Make sure the ssh binaries are executable (in service directory)
if [ ! -x "${CRYPTO_SSH}/sbin/sshd" ] ; then
chmod ugo+x ${CRYPTO_SSH}/sbin/sshd ${CRYPTO_SSH}/bin/ssh* ${CRYPTO_SSH}/bin/scp* || true
chmod ugo+x ${CRYPTO_SSH}/bin/sftp ${CRYPTO_SSH}/lib/openssh/* || true
chmod ugo+x ${CRYPTO_OPT}/devmode/usr/bin/* || true
fi
# TODO: (later) Look for "re-init" flag to re-generate ssh key if requested by app (via devkey service)
# com.palm.service.devmode could have "resetKey" method to erase /var/lib/devmode/ssh/webos_rsa
# Kind of dangerous though, since new key will need to be fetched on the desktop (after reboot)...
# We could just require a hard-reset of the TV which should blow away /var/lib/devmode/ssh/...
# Initialize the developer (client) SSH key pair, if it doesn't already exist
if [ ! -e /var/lib/devmode/ssh/webos_rsa ] ; then
mkdir -p /var/lib/devmode/ssh
chmod 0700 /var/lib/devmode/ssh
# get FIRST six (UPPER-CASE, hex) characters of 40-char nduid from nyx-cmd
# NOTE: This MUST match passphrase as displayed in devmode app (main.js)!
# PASSPHRASE="`/usr/bin/nyx-cmd DeviceInfo query nduid | head -c 6 | tr 'a-z' 'A-Z'`"
# PASSPHRASE="`/usr/bin/nyx-cmd DeviceInfo query nduid | tail -n1 | head -c 6 | tr 'a-z' 'A-Z'`"
PASSPHRASE="`tail /var/lib/secretagent/nduid -c 40 | head -c 6 | tr 'a-z' 'A-Z'`"
${CRYPTO_SSH}/bin/ssh-keygen -t rsa -C "[email protected]" -N "${PASSPHRASE}" -f /var/lib/devmode/ssh/webos_rsa
# copy ssh key to /var/luna/preferences so the devmode service's KeyServer can read it and serve to ares-webos-cli tools
cp -f /var/lib/devmode/ssh/webos_rsa /var/luna/preferences/webos_rsa
chmod 0644 /var/luna/preferences/webos_rsa
# if we generated a new ssh key, make sure we re-create the authorized_keys file
rm -f ${DEVELOPER_HOME}/.ssh/authorized_keys
fi
# Make sure the /media/developer (and log) directories exists (as sam.conf erases it when devmode is off):
mkdir -p ${DEVELOPER_HOME}/log
chmod 777 ${DEVELOPER_HOME} ${DEVELOPER_HOME}/log
# Install the SSH key into the authorized_keys file (if it doesn't already exist)
if [ ! -e ${DEVELOPER_HOME}/.ssh/authorized_keys ] ; then
mkdir -p ${DEVELOPER_HOME}/.ssh
cp -f /var/lib/devmode/ssh/webos_rsa.pub ${DEVELOPER_HOME}/.ssh/authorized_keys || true
# NOTE: authorized_keys MUST be world-readable else sshd can't read it inside the devmode jail
# To keep sshd from complaining about that, we launch sshd with -o "StrictModes no" (below).
chmod 755 ${DEVELOPER_HOME}/.ssh
chmod 644 ${DEVELOPER_HOME}/.ssh/authorized_keys
chown -R developer:developer ${DEVELOPER_HOME}/.ssh
fi
# FIXME: Can we move this to /var/run/devmode/sshd ?
# Create PrivSep dir
mkdir -p /var/run/sshd
chmod 0755 /var/run/sshd
# Create directory for host keys (rather than /opt/openssh/etc/ssh/)
HOST_KEY_DIR="/var/lib/devmode/sshd"
if [ ! -d "${HOST_KEY_DIR}" ] ; then
mkdir -p ${HOST_KEY_DIR}
chmod 0700 ${HOST_KEY_DIR}
fi
# Create initial keys if necessary
if [ ! -f ${HOST_KEY_DIR}/ssh_host_rsa_key ]; then
echo " generating ssh RSA key..."
${CRYPTO_SSH}/bin/ssh-keygen -q -f ${HOST_KEY_DIR}/ssh_host_rsa_key -N '' -t rsa
fi
if [ ! -f ${HOST_KEY_DIR}/ssh_host_ecdsa_key ]; then
echo " generating ssh ECDSA key..."
${CRYPTO_SSH}/bin/ssh-keygen -q -f ${HOST_KEY_DIR}/ssh_host_ecdsa_key -N '' -t ecdsa
fi
if [ ! -f ${HOST_KEY_DIR}/ssh_host_dsa_key ]; then
echo " generating ssh DSA key..."
${CRYPTO_SSH}/bin/ssh-keygen -q -f ${HOST_KEY_DIR}/ssh_host_dsa_key -N '' -t dsa
fi
# Check config
# NOTE: This should only be enabled for testing
#${CRYPTO_SSH}/sbin/sshd -f ${CRYPTO_SSH}/etc/ssh/sshd_config -h ${HOST_KEY_DIR}/ssh_host_rsa_key -t
# Set jailer command
DEVMODE_JAIL="/usr/bin/jailer -t native_devmode -i com.palm.devmode.openssh -p ${DEVELOPER_HOME}/ -s /bin/sh"
#DEVMODE_JAIL="echo"
# Add for debugging, but this will cause sshd to exit after the first ssh login:
# -ddd -e
# Make environment file for openssh
DEVMODE_JAIL_CONF="/etc/jail_native_devmode.conf"
DEVMODE_OPENSSH_ENV="${DEVELOPER_HOME}/.ssh/environment"
if [ -f ${DEVMODE_JAIL_CONF} ]; then
echo " generating environment file from jail_native_devmode.conf..."
find ${DEVMODE_JAIL_CONF} | xargs awk '/setenv/{printf "%s=%sn", $2,$3}' > ${DEVMODE_OPENSSH_ENV}
${DEVMODE_JAIL} /usr/bin/env >> ${DEVMODE_OPENSSH_ENV}
fi
# Set path for devmode
if [ -f ${DEVMODE_OPENSSH_ENV} ]; then
echo "PATH=${PATH}:${OPT_DEVMODE}/usr/bin" >> ${DEVMODE_OPENSSH_ENV}
fi
sleep 5;
for interface in $(ls /sys/class/net/ | grep -v -e lo -e sit);
do
if [ -r /sys/class/net/$interface/carrier ] ; then
if [[ $(cat /sys/class/net/$interface/carrier) == 1 ]]; then OnLine=1; fi
fi
done
#if [ $OnLine ]; then
# sessionToken=$(cat /var/luna/preferences/devmode_enabled);
# checkSession=$(curl --max-time 3 -s https://developer.lge.com/secure/CheckDevModeSession.dev?sessionToken=$sessionToken);
# if [ "$checkSession" != "" ] ; then
# result=$(node -pe 'JSON.parse(process.argv[1]).result' "$checkSession");
# if [ "$result" == "success" ] ; then
rm -rf /var/luna/preferences/dc*;
# # create devSessionTime file to remain session time in devmode app
# remainTime=$(node -pe 'JSON.parse(process.argv[1]).errorMsg' "$checkSession");
# resultValidTimeCheck=$(echo "${remainTime}" | egrep "^([0-9]{1,4}(:[0-5][0-9]){2})$");
# if [ "$resultValidTimeCheck" != "" ] ; then
echo '900:00:00' > ${DEVMODE_SERVICE_DIR}/devSessionTime;
chgrp 5000 ${DEVMODE_SERVICE_DIR}/devSessionTime;
chmod 664 ${DEVMODE_SERVICE_DIR}/devSessionTime;
# fi
# elif [ "$result" == "fail" ] ; then
# rm -rf /var/luna/preferences/devmode_enabled;
# rm -rf /var/luna/preferences/dc*;
# if [ -e ${DEVMODE_SERVICE_DIR}/devSessionTime ] ; then
# rm ${DEVMODE_SERVICE_DIR}/devSessionTime;
# fi
# fi
# fi
#fi
# Cache clear function added (except Local storage)
if [ -e ${DEVMODE_SERVICE_DIR}/devCacheClear ] ; then
rm -rf `ls | find /var/lib/webappmanager*/* -name "Local Storage" -o -name "localstorage" -prune -o -print`;
rm ${DEVMODE_SERVICE_DIR}/devCacheClear;
fi
# Launch sshd
${DEVMODE_JAIL} ${OPT_SSH}/sbin/sshd
-o StrictModes=no
-f ${OPT_SSH}/etc/ssh/sshd_config
-h ${HOST_KEY_DIR}/ssh_host_rsa_key
-o PasswordAuthentication=no -o PermitRootLogin=no -o PermitUserEnvironment=yes
-D -p ${SSH_PORT}
7) Upload new start-devmode.sh and rewrite the old one
Code:
cp /tmp/start-devmode.sh /media/cryptofs/apps/usr/palm/services/com.palmdts.devmode.service/start-devmode.sh
8) Restart TV.
Connect with telnet and type previously entered password.
Code:
telnet <ip-tv>
Trying <ip-tv>...
Connected to <ip-tv>].
Escape character is '^]'.
webOS TV 1.4.0 LGSmartTV
Give root password for system maintenance
(or type Control-D for normal startup):
Entering System Maintenance Mode
[email protected]:/#

Does it work on WebOS 3.5 devices?

medi01 said:
Does it work on WebOS 3.5 devices?
Click to expand...
Click to collapse
Positive.

is it possible to install webOS 3.0 on an 65EF9500 that currently has WebOS 2.0 via the USB upgrade method?

enkrypt3d said:
is it possible to install webOS 3.0 on an 65EF9500 that currently has WebOS 2.0 via the USB upgrade method?
Click to expand...
Click to collapse
No

Is there any method to get 3.0 installed over 1.4 I have a 49ub8500-ua

syconu said:
Is there any method to get 3.0 installed over 1.4 I have a 49ub8500-ua
Click to expand...
Click to collapse
No

Is there anything hack related that I can do with this to and can is support a new air mouse with a dongle

Ok, so I get run the root app and first ,second , and third stage all are good. then it says try get root password is 1111. But the terminal keeps freezing after that happens. A couple times my tv rebooted too. I cant figure out what i could have messed up. ANyone with any experience using this method have any legit information?

steven817817 said:
Ok, so I get run the root app and first ,second , and third stage all are good. then it says try get root password is 1111. But the terminal keeps freezing after that happens. A couple times my tv rebooted too. I cant figure out what i could have messed up. ANyone with any experience using this method have any legit information?
Click to expand...
Click to collapse
Try to delete all 'cache' files from exploit at /media/developer. It doesn't wotk twice as far as I concerned

Is there anyway I can root my 1.4.0 and if so what r the benefits of the root? Can I install Android or kodi? What's the point

teffd said:
Try to delete all 'cache' files from exploit at /media/developer. It doesn't wotk twice as far as I concerned
Click to expand...
Click to collapse
I tried it stil seems to finish step 3 then says enter 1111. But this is where it freezes up and does not get any further.

Is this still working on 3.6? I'm stuck at try to install any app from market.

Mazda77 said:
Positive.
Click to expand...
Click to collapse
Which TV and firmware version?
Is this possible with UJ63 serie?

Hi, would the root access allow somehow to connect other bluetooth devices different than LG? Thanks!

You can do pretty much anything to the system with root, even include support for unsupported devices in form of additional kernel modules.
For example, I've added Samba support so I can mount use my NAS (see my blog at ddscentral dot org for details).

Hey guys is it possible to install android apps into WebOS? I just bought an Lg oled LG 55EG9A7V i want to use Perfect Player IPTV but i cant install it right now...Other then that i dont need anything else..
Can anyone help me?