Help identify Rom for RK3188 mtcd device - MTCD Android Head Units Q&A

Hello all.
I am wondering if anyone could redirect me to the right thread for a rom for my Eirsin based android headunit ...
I am looking to upgrade to a rom that has an android auto receiver so I can use android auto in my car ..
Please see attached screenshot

haris2887 said:
Hello all.
I am wondering if anyone could redirect me to the right thread for a rom for my Eirsin based android headunit ...
I am looking to upgrade to a rom that has an android auto receiver so I can use android auto in my car ..
Please see attached screenshot
Click to expand...
Click to collapse
Suggest installing a true Android auto unit if Android auto is what you want.

Related

[Q] Haier L3D42D25N smart TV software update

Hello folks,
I am fairly new to the Android OS so please be gentle
I took the plunge and finally got a smart TV from Haier which came with the 2.3.4 Android system. All is fine an cherry in 2.3.4 town as of now (apart from its horribly looking user interface design). But was wondering if i could install the 4.0 update ?
Isnt the android system like any other where you have one default version of the OS that comes from google and then there are variants from the open-source community ? If so then which is the best stable version and where can i find it.
Installation of the 2.3.4 OS is on an MMC that i copied from the technicians that came home to fix the TV so i am fine with a backup and the procedure for the install from an MMC. But i assume that if i download the OS from the internet then the procedure will be a bit different ?
I'll update more of the details (Kernel version etc) when i get home. All this because the manufacture - Haier - does not provide updates online or on its website or anywhere on the web. Appreciate any help.
Thanks in advance.
Gaj
Hi Gaj - I have the same question which you have. Did you get any response from anyone or have you now upgraded to the latest version ?
If you have the latest firmware to upgrade , please share it with me or else please share the OS back up what you have as I don't even have it
please help me
Regards
Sri
email - [email protected]
gshelvankar said:
Hello folks,
I am fairly new to the Android OS so please be gentle
I took the plunge and finally got a smart TV from Haier which came with the 2.3.4 Android system. All is fine an cherry in 2.3.4 town as of now (apart from its horribly looking user interface design). But was wondering if i could install the 4.0 update ?
Isnt the android system like any other where you have one default version of the OS that comes from google and then there are variants from the open-source community ? If so then which is the best stable version and where can i find it.
Installation of the 2.3.4 OS is on an MMC that i copied from the technicians that came home to fix the TV so i am fine with a backup and the procedure for the install from an MMC. But i assume that if i download the OS from the internet then the procedure will be a bit different ?
I'll update more of the details (Kernel version etc) when i get home. All this because the manufacture - Haier - does not provide updates online or on its website or anywhere on the web. Appreciate any help.
Thanks in advance.
Gaj
Click to expand...
Click to collapse

Volsmart, 5.1, RK3188, root?

Hey guys! Been out of the rooting game for a while now. All these locked bootloader nowadays has that effect. Thank God for the Chinese! I just ordered a android head unit for the car from Amazon :
Volsmart 7 inch Android 5.1.1 Car Stereo Lollipop Quad Core 1024600 Capacitive Touch Screen without DVD Player support GPS Navigation Radio Bluetooth OBD2 USB SD WiFi ScreenMirror Backup Camera https://www.amazon.com/dp/B01FVV8U2M/ref=cm_sw_r_other_apa_5jF5xbJ1VW5C8
And I'm wondering what the root process is like for one of these. I'm not sure sure if I should be looking for this specific device, or just something generic based on the software version for instructions. Can anyone point me in the right direction?
I have Volsmart 5.1 Mtcd-kgl mcu version 1.75_1. If your Mcu version is older, you can ask the seller to give you the latest firmware.
You can use Malaysk MTCD ROM.
I used Malaysk Rom v5 and then upgraded to V6. My HU is running without issue. Malaysk ROM is a pre rooted ROM.
Make sure that you know how to get to recovery menu of the head unit.
Right after upgrading to Makaysk ROM, it is hard to get to recovery to clear cache and data. Keep trying several times, you will be able to. After this, getting to the recovery is normal.
If you don't want to use Malaysk ROM, use Kingo Root, just follow the Xposed LP thread under MTCB development. I did try it successfully before I used Malaysk ROM.
So basically it's just as simple as flashing a different rom, eh? Sounds a little too easy lol
Got it all installed over the weekend. Working great!
Volsmart firmware
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
arielo2014 said:
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
Click to expand...
Click to collapse
Do you have a link for the latest mcu update? The people at Volsmart have not been very helpful with my inquiries.
---------- Post added at 07:08 AM ---------- Previous post was at 07:00 AM ----------
cemotech said:
Do you have a link for the latest mcu update? The people at Volsmart have not been very helpful with my inquiries.
Click to expand...
Click to collapse
Sorry, after some more searching I found it here. http://forum.xda-developers.com/and...k3188-mtcd-t3366561/post69468247#post69468247
arielo2014 said:
Hi guys
I bougth a head unit Volsmart android 5.1.1 for my Toyota Corolla 2009 at Amazon.com. I wrote directly to the vendor and they sent me an update with MCU 1.92.a1 dated in 10/16/2016, I let the link here. By the way I could not intall Malaysk because after doing the manual reset the head unit never found the Dupdate.img in the GPS car, I do not know why.
I'm sorry i could not write the link here because i'm new in the Forum
Thanks Ariel.
Click to expand...
Click to collapse
Ariel please share de link

Stock APKs MOD for MTCD?

Hi guys..
I have been searching but can´t find any modded apps for the radio, bluetooth and music like the ones I can find for Android 5.1.1...
but for Android 7.1 don´t find anything..
What about something like this:
Possible to have this mod for Intel Sofia 3G devices?
https://forum.xda-developers.com/an...ia-units-wifi-3g-t3533154/page69#post75302072
KoTiX2 said:
What about something like this:
Click to expand...
Click to collapse
good! Only for px5?
Px3 or px5 shouldn't really matter, the apps are the same...
I cannot make it for intelsofia because I don't have such a unit to test it.
I
KoTiX2 said:
What about something like this:
Click to expand...
Click to collapse
Hello Kotix, I used your ROM for the Roadnav s160 and now I have bought a PX5 model. I was glad when I saw your video of a ROM for PX5. Where can I follow the evolution of this work?
Thanks and best regards.
Hi Hanzejo,
I will post more videos on my youtube channel
but you have a rom with 7.1 nougat?
I have also a a nougat ROM to work on but right now there is nothing ready for public.
My plan is to finalize the px5 (android 6) ROM first and adapt it to px3 (android 7) later.
I don't know the timings to do all this...
Here are some more progresses in the main apps customization
I also made some new widgets and resized the clock ones:

hal9K 7.1.2 upgrade to 9 instructions help MTCD

Hi,I recently installed the hal9K 7.1.2 from android 5.1.1. However I would really really like to upgrade my HU to android 9. After hours of searching forum and Google I haven't found any material on this specifically mentioning upgrade of 9 over 7.1.2. I had two queries.
1. Has anyone done a update from the above mentioned "hal9K 7.1.2 for all head units" upgrade successfully to the android 9.
2. If yes have can you please please provide instructions on how I can go about doing this. With DL links for software.
p.s. could you also mention any known issues I.e. hal9K 7.1.2 has issue with stock video player.
props to hal9K for a brilliant android 7 upgrade love the work thank you.
if this question has been answered please provide link.*

Setting up Android on a smart projector

Hi, I got myself a smart projector running on Android. Unfortunetely the deveopers installed a really old version and it seems there is no way to update them. When trying to add an account to the system or let alone update the system tells me that it can not communicate with the google servers. So, I am planning to install a new Android version on the smart projector.
Can anyone point me towards a good resource (on the net) that tells me what information I need to have, which files from the current installation I need to keep (i.e. drivers) before installing whoch ROM?
Thanks in advance for your help!
Pankratius70 said:
smart projector running on Android
Click to expand...
Click to collapse
Sounds familiar - having the same problem: My Philips Picopix 4935 is a splendid device but its Android 4 isn't much fun (especially with newer audio/video-formats).
What model do you have?

Categories

Resources