Database Info

HELP Dead Yu

can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...

Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply

my ph vibrt bt no display

Is your phone yu5010 or yu5010a

satyabobby09 said:
Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply
Click to expand...
Click to collapse
bro my yuphoria is also dead it doesn't even get detected by pc as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 bro help me!!!

satyabobby09 said:
Hi
Does your device show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008 . on your computer.
Also is ur device hard bricked like no display no vibration but gets detected by pc as com port in device manager.
If this is ur condition give a reply
Click to expand...
Click to collapse
Qfil is giving this error do you have any fix ??

arun531 said:
can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...
Click to expand...
Click to collapse
i'm dumping YU5010A Emmc once it is done.i don't know if flashing it on SdCard will revive my dead Yuphoria incase it works i will upload it

arun531 said:
can anyone sent the whole emmc dump of yuphoriya 5010A
bcoz mine is dead...
Click to expand...
Click to collapse
tried it doesn't boots fastboot with sdcard

smh.saad said:
Qfil is giving this error do you have any fix ??
Click to expand...
Click to collapse
1. install QPST tool. and drivers.extract file also.
2. go to "run" and search for "QFIL", hit enter. it will open QPST tool.
3. in QPST tool.. select flat build
4. for "select programmer" select program_emmc
. 5. for XML, select raw program & then patch0.
then "Download" option wil get highlighted.
press vol+ & connect flashing. do not leave vol+ key untill flashing complete.
Do not forget to holdind vol+ button Best of luck bro

satyabobby09 said:
1. install QPST tool. and drivers.extract file also.
2. go to "run" and search for "QFIL", hit enter. it will open QPST tool.
3. in QPST tool.. select flat build
4. for "select programmer" select program_emmc
. 5. for XML, select raw program & then patch0.
then "Download" option wil get highlighted.
press vol+ & connect flashing. do not leave vol+ key untill flashing complete.
Do not forget to holdind vol+ button Best of luck bro
Click to expand...
Click to collapse
unable to connect to comPort error

smh.saad said:
unable to connect to comPort error
Click to expand...
Click to collapse
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved

satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
did u got COM Port error on windows 10 i got it on windows 8.1 nd 7

satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
can you link me the drivers for yuphoria as my windows 7 64bit even tried 10,8,8.1 ..
was your device yu5010A??

smh.saad said:
can you link me the drivers for yuphoria as my windows 7 64bit even tried 10,8,8.1 ..
was your device yu5010A??
Click to expand...
Click to collapse
I had both yu5010A n you 5010CM. I'll give u the link soon(I'm at office. I'll upload or find u the link when I reach home.). I had problem with win 10. And one more thing you should boot in safe mode for unsigned drivers to install

View attachment 4011689
this is the link n change it to .rar from .zip
https://forum.xda-developers.com/attachment.php?attachmentid=4011689&stc=1&d=1485012543

satyabobby09 said:
View attachment 4011689
this is the link n change it to .rar from .zip
https://forum.xda-developers.com/attachment.php?attachmentid=4011689&stc=1&d=1485012543
Click to expand...
Click to collapse
I had tried many things including QPST AND QFIL to revive my hardbricked yuphoria yu5010 two-three months earlier, but had the same error as shown in earlier attachement image having sahara error in this thread. But didn't try of keep pressing vol + button during qfil download.
hey @satyabobby09, have you really ever revived hard-bricked yuphoria ?

ravi2106 said:
I had tried many things including QPST AND QFIL to revive my hardbricked yuphoria yu5010 two-three months earlier, but had the same error as shown in earlier attachement image having sahara error in this thread. But didn't try of keep pressing vol + button during qfil download.
hey @satyabobby09, have you really ever revived hard-bricked yuphoria ?
Click to expand...
Click to collapse
I have unbricked my device. The process needs to be followed properly

Have u revived u r yuphoria
satyabobby09 said:
which windows OS are u using. i had problems with win 10 . use win7 64bit if possible. its easier to install the drivers.Then COM port error should get solved
Click to expand...
Click to collapse
Satyabobby09;
Can I get u r contact no plz so that I can get details regarding how to revive hard bricked yuphoria

satyabobby09 said:
I have unbricked my device. The process needs to be followed properly
Click to expand...
Click to collapse
means, you revived your yuphoria using only this QPST and QFIL tool ? when no recovery and fastboot were working. confirm me please @satyabobby09 .

ravi2106 said:
means, you revived your yuphoria using only this QPST and QFIL tool ? when no recovery and fastboot were working. confirm me please @satyabobby09 .
Click to expand...
Click to collapse
Yes you need qfil signed ROM n qpst. Also this is msm8916 so use msm8916.mbn
Guys follow this video its in Hindi hope this. Helps you
https://youtu.be/5qnr8bJ2Zso

Black and only black... bootloader lost ?

Hello, everyone,
I've buy a mi4c for my sisters and it arrived with a multilanguange bad rom... so like with my other devices I try to change my rom, and I do a big error...
-I reboot to edl (with adb command) flash the fastboot rom with miflash , no error but now my phone stay black....
I find that here in an other topic : http://en.miui.com/thread-170110-1-1.html
Do you think that will work ? else do you have another solution ?
qualcomm driver is working but nothing else....

hold the power button for 8s

Try to use miflash to do that again.

Hello, thanks for your answers,
Hold 8s : I have already done that, don't work
Sakura_Sa233 said:
Try to use miflash to do that again.
Click to expand...
Click to collapse
Retry same if my phone couldn't go to fastboot ?

jordandroid64 said:
Hello, thanks for your answers,
Hold 8s : I have already done that, don't work
Retry same if my phone couldn't go to fastboot ?
Click to expand...
Click to collapse
Do you know 8009 mode？

Sakura_Sa233 said:
Do you know 8009 mode？
Click to expand...
Click to collapse
No, it's when the qualcomm driver appear ?

jordandroid64 said:
No, it's when the qualcomm driver appear ?
Click to expand...
Click to collapse
You can search it in Google .

Sakura_Sa233 said:
You can search it in Google .
Click to expand...
Click to collapse
I have seen this is mode which permit to repair a qualcomm device brick... But there are tutorials for device really complicated...
But i will try with miflash like you said

Hey,
I had reconnect it to reflash by miflash and now the led is blinking red but qualcomm driver diseappear
edit : MI4c work now ! thanks !

Question My oneplus 9 le2110 stuck in EDL mode

I try all commands and procedure like volume+/- and power button all things but still screen is black and when i connect it to pc in manager it show me qualcomm 9008..
And when i flash it with msm tool oneplus 9 msm tool india it always show me error

Wrong suggestion, so I edited it out. Good luck unbricking

noname122414 said:
Wrong suggestion, so I edited it out. Good luck unbricking
Click to expand...
Click to collapse
How?

I saw in another post that you are aware of your chinese version. So you probably already tried flashing this version ( https://forum.xda-developers.com/t/official-oneplus-9-oxygen-to-color-and-back.4256457/ ) just patch the to Oxygen again on the chinese version.

How i can patch i told my phone is stuck in Edl mode hard brick

So no fastboot commands are working? Fastboot devices says nothing? Say what you tried, and your current situation in as much detail as possible. People can only help you when they understand what happened and what is still possible to do.

Brother my device is stuck in Edl mode because when i connect to pc it show me qualcomm 9008 in device manager..
I tried all Fastboot commands, power + , power - button & power button but nothing happened still device stuck in Edl mode and also msm tools of india doesn't work

Did you ever get a good flash from msm tool? If not try the original chinese version phone came with.
Also you can try holding power button until phone reboots but nothing to boot too will just go back to edl.

Y
nujackk said:
Did you ever get a good flash from msm tool? If not try the original chinese version phone came with.
Also you can try holding power button until phone reboots but nothing to boot too will just go back to edl.
Click to expand...
Click to collapse
Yes i use msm tools many time on another devices it works but on this case it doesn't work on oneplus 9

Wolverine619 said:
Y
Yes i use msm tools many time on another devices it works but on this case it doesn't work on oneplus 9
Click to expand...
Click to collapse
Sorry bud, if you can't get a good flash with msm you're stuck far as i know.

nujackk said:
Sorry bud, if you can't get a good flash with msm you're stuck far as i know.
Click to expand...
Click to collapse
Do you told me about solution?
My phone battery was 100% when it's stuck in Edl mode any idea for 100% to 0%?

Holding the power button an unreasonable long time always worked for me did it with 6 and 7pro. Even if it goes back to edl if you have msm ready and waiting for device v when it reboots to edl should pick it up and begin flash

nujackk said:
Holding the power button an unreasonable long time always worked for me did it with 6 and 7pro. Even if it goes back to edl if you have msm ready and waiting for device v when it reboots to edl should pick it up and begin flash
Click to expand...
Click to collapse
See brother

I see what you mean. Not sure what sahara error state is. Not sure you'll be able to fix that on your own. You may need to contact oneplus see if they can help. They tend to be willing to help in most cases. But may cost you since I'm sure this wouldn't be covered under warranty.

sahara error usually happens when you flash the wrong firmware.

noname122414 said:
sahara error usually happens when you flash the wrong firmware.
Click to expand...
Click to collapse
Can anyone tell me how to fix it?

Did you try everything what's written here? https://blog.hovatek.com/how-to-fix-sahara-fail-error-in-qfil/ when nothing there first with your problem then write here again.

noname122414 said:
Did you try everything what's written here? https://blog.hovatek.com/how-to-fix-sahara-fail-error-in-qfil/ when nothing there first with your problem then write here again.
Click to expand...
Click to collapse
I don't have file's for oneplus 9
Any one know how to extract .ops file of Msm tool

Wolverine619 said:
I don't have file's for oneplus 9
Any one know how to extract .ops file of Msm tool
Click to expand...
Click to collapse
"Payload dumper 64" can get the files for you that's an application there is also a python script which does the same.

I personally used "payload dumper 64" then flashed the files vis fastboot to recover 2 Chinese variant until now( you have to use the right rom which is normally used to switch from Chinese rom to Oxygen)
This is just how I recovered the phones.
Edit: sorry it's late you are probably looking for the msm download tool files, I probably messed things up

I'm having problems with my infinix zero 8

I tried for a gsi ROM and now my phone won't turn on and the sp flash doesn't work could someone help me?

Witcher rr said:
I tried for a gsi ROM and now my phone won't turn on and the sp flash doesn't work could someone help me?
Click to expand...
Click to collapse
Not much descriptive: "sp flash doesn't work", anyway you want to read this: https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/

SubwayChamp said:
Not much descriptive: "sp flash doesn't work", anyway you want to read this: https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/
Click to expand...
Click to collapse
when I go to put the stock rom file it says that the file is not compatible

Witcher rr said:
when I go to put the stock rom file it says that the file is not compatible
Click to expand...
Click to collapse
Then download the exact version that is for your device, add some screenshots here, also I guess you backed up something.

SubwayChamp said:
Then download the exact version that is for your device, add some screenshots here, also I guess you backed up something.
Click to expand...
Click to collapse
I already downloaded the version for my cell phone not I understand why you won't

Witcher rr said:
I already downloaded the version for my cell phone not I understand why you won't
Click to expand...
Click to collapse
It's hard, someone can help you without important info. You need to share some things like:
- How did you try to flash that GSI? Using which method?
- Is your device unlocked?
- I mentioned previously something like a backup, what about?
- If you are trying to flash the same version that was already onto your device (a downgrade is not allowed)
- If you really put the device in download mode?
- In SP Flash tool, which option you are trying? And if the tool detected device?
- How is your device listed in device manager from Windows PC?
- What exactly the message from SP Flash tool was?

SubwayChamp said:
It's hard, someone can help you without important info. You need to share some things like:
- How did you try to flash that GSI? Using which method?
- Is your device unlocked?
- I mentioned previously something like a backup, what about?
- If you are trying to flash the same version that was already onto your device (a downgrade is not allowed)
- If you really put the device in download mode?
- In SP Flash tool, which option you are trying? And if the tool detected device?
- How is your device listed in device manager from Windows PC?
- What exactly the message from SP Flash tool was?
Click to expand...
Click to collapse
I managed to fix the sp flash but I can't put the cell phone in download mode because I put the twrp what do I do??

Witcher rr said:
I managed to fix the sp flash but I can't put the cell phone in download mode because I put the twrp what do I do??
Click to expand...
Click to collapse
Usually download mode works with device off and connecting to the PC, TWRP doesn't matter here, you have to read a sound that reveals if PC is detecting and then if you tap on download option in SP Flash tool and connect device you will see the progressing bar down.

SubwayChamp said:
Normalmente o modo de download funciona com o dispositivo desligado e conectado ao PC, TWRP não importa aqui, você tem que ler um som que revela se o PC está detectando e então se você tocar na opção de download na ferramenta SP Flash e conectar o dispositivo, você verá a barra de progressão para baixo.
Click to expand...
Click to collapse
my cell phone doesn't turn off, it continues to fast start and gives an error

Witcher rr said:
meu celular não desliga, ele continua em inicialização rápida e dá um erro
Click to expand...
Click to collapse
English is required here.
To completely power off the device you should have to press the three buttons simultaneously per about 10 seconds and keep it connected to the PC, press the Download option in the tool in a way that while device power off at least for a second the tool will detect it, and it will proceed with the installation of the firmware.

SubwayChamp said:
O inglês é obrigatório aqui.
Para desligar completamente o dispositivo, você deve ter que pressionar os três botões simultaneamente por cerca de 10 segundos e mantê-lo conectado ao PC, pressione a opção Download na ferramenta de forma que enquanto o dispositivo estiver desligado por pelo menos um segundo a ferramenta irá detectá-lo e ele prosseguirá com a instalação do firmware.
Click to expand...
Click to collapse
thanks

SubwayChamp said:
English is required here.
To completely power off the device you should have to press the three buttons simultaneously per about 10 seconds and keep it connected to the PC, press the Download option in the tool in a way that while device power off at least for a second the tool will detect it, and it will proceed with the installation of the firmware.
Click to expand...
Click to collapse
I'm facing the problem sp flash tool error status brom cmd send da fail​

Witcher rr said:
I'm facing the problem sp flash tool error status brom cmd send da fail​
Click to expand...
Click to collapse
Then you need this https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/ read carefully the thread, replace the files from the Redmi Note 9 for those that are for your device, if you do it correctly, for sure this will solve your issue.

SubwayChamp said:
Then you need this https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/ read carefully the thread, replace the files from the Redmi Note 9 for those that are for your device, if you do it correctly, for sure this will solve your issue.
Click to expand...
Click to collapse
thanks I'll try

SubwayChamp said:
Then you need this https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/ read carefully the thread, replace the files from the Redmi Note 9 for those that are for your device, if you do it correctly, for sure this will solve your issue.
Click to expand...
Click to collapse
I couldn't ): my computer didn't start python and everything I tried gave an error

Witcher rr said:
I couldn't ): my computer didn't start python and everything I tried gave an error
Click to expand...
Click to collapse
Well, you have there the solution, it's up to you keep it trying till you finally can achieve it, probably you need to uninstall Python and then reinstall it, probably you need even run it in other Windows version, maybe install Windows from fresh.
Other people could do it and my self I had solved the issue with my bricked RN9 so just depends to get it work from checking every part is needed on the process.

Ami
SubwayChamp said:
Well, you have there the solution, it's up to you keep it trying till you finally can achieve it, probably you need to uninstall Python and then reinstall it, probably you need even run it in other Windows version, maybe install Windows from fresh.
Other people could do it and my self I had solved the issue with my bricked RN9 so just depends to get it work from checking every part is needed on the process.
Click to expand...
Click to collapse
And I won't be able to because my computer is windows 7): But my cell phone has the pitch Black, will it be possible to put a gsi on it??

Witcher rr said:
Ami
And I won't be able to because my computer is windows 7):
Click to expand...
Click to collapse
probably it works too on W7.
Witcher rr said:
But my cell phone has the pitch Black, will it be possible to put a gsi on it??
Click to expand...
Click to collapse
If your device can enter to fastboot and its bootloader is unlocked you can, you also should need the USB debugging to have enabled.

SubwayChamp said:
probably it works too on W7.
If your device can enter to fastboot and its bootloader is unlocked you can, you also should need the USB debugging to have enabled.
Click to expand...
Click to collapse
I already managed to put the Black pitch but I don't know how to put a gsi

Witcher rr said:
I already managed to put the Black pitch but I don't know how to put a gsi
Click to expand...
Click to collapse
I even put one but the cell phone won't turn on

Unable to flash in EDL mode. Error: object reference is not set to an instance of the object

Hello there!
My phone was bricked because I was flashing xiaomi.eu ROM in fastboot mode using cmd, and the flashing process was stopped midway.
I am able to enter into EDL mode only and only by using the test points, my phone is recognised as "Qualcomm HS-USB QDLoader 9008" as it should and also appears in MiFlash.
But when I try to flash a ROM (I tried global and Chinese) it gives me this error: "object reference is not set to an instance of the object".
I believe I have all the necessary drivers and my battery is probably long dead since the phone has been bricked for about a month now.
I read a bunch of articles describing similar problems but none of them gave a clear answer.

BlackTrade30 said:
Thank you for the quick reply!
I was guessing I needed an authorized account but MiFlash usually clearly indicated when you did. Something like "Authentication error". At least I have a solution!
Also, the thread you linked; the guy had symptoms that are exactly the same as I have. Unfortunately, he hasn't replied to me yet. According to him, he managed to get the phone unbricked using QFIL but didn't describe how. But thank you for bringing it to my attention!
Click to expand...
Click to collapse
Some old phones can be flashed without authorization but the k30 pro / poco f2 pro cannot.

Hello!
I have exactly the same problem as you (phone bricked after xiaomi.eu fastboot update) but i don't manage to enter in EDL mode even with testpoint... What did you used to do it?
Also, how much did you pay for the auth account perm?
Thanks.

Try flash it by UMT

MaximeMNT said:
Hello!
I have exactly the same problem as you (phone bricked after xiaomi.eu fastboot update) but i don't manage to enter in EDL mode even with testpoint... What did you used to do it?
Also, how much did you pay for the auth account perm?
Thanks.
Click to expand...
Click to collapse
Hello!
I manager to fix the phone!
Entering EDL mode should be possible using the test points.
Make sure your battery is disconnected.
Connect the USB to your phone but not to the PC.
Then short out the two pins.
I used tweezers to short them out.
While shorted plug in the USB the the PC. The PC then should detect the phone as a COM-PORT, you need the drivers if it says bulk device. It has to be USB 9008.
Now you need someone who can flash.
Mod edit: Paid services TG link removed.

EDL are Qcom's special access protocol. You should be able to flash via Qfil or Qpst suite, not Mi tool.

MA7MOD_GSM said:
Try flash it by UMT
Click to expand...
Click to collapse
UMT is free tool ???

NOSS8 said:
Some old phones can be flashed without authorization but the k30 pro / poco f2 pro cannot.
Click to expand...
Click to collapse
Respected sir,
Soft bricked locked bootloader Redmi 4 has same error in edl mode. Initially it was successfully flashed in edl with miflash few days ago to global fastboot rom Santoni_10.3NAMMIXM. It was working properly. Then It was showing latest update available 11.0.2NAMMIXM in setting, I downloaded and rebooted then after sometime It redirected 'mi recovery 3.0' instead of restarting the mobile automatically. Then i choosen to 'reboot to system' by volume buttons. Then it stucked on mi logo. Now i can't enter in "mi recovery 3.0". But by volume buttons i can fastboot, and In edl by shorting test points. Both are detecting device in miflash tool.
Fastboot mode flashing gives me "critical partition error"
EDL mode gives "object reference not set as an object" error in miflash tool this time.
Dear sir any suggestion or resolve for that.please help.
Thank you sir

chandan shah said:
Respected sir,
Soft bricked locked bootloader Redmi 4 has same error in edl mode. Initially it was successfully flashed in edl with miflash few days ago to global fastboot rom Santoni_10.3NAMMIXM. It was working properly. Then It was showing latest update available 11.0.2NAMMIXM in setting, I downloaded and rebooted then after sometime It redirected 'mi recovery 3.0' instead of restarting the mobile automatically. Then i choosen to 'reboot to system' by volume buttons. Then it stucked on mi logo. Now i can't enter in "mi recovery 3.0". But by volume buttons i can fastboot, and In edl by shorting test points. Both are detecting device in miflash tool.
Fastboot mode flashing gives me "critical partition error"
EDL mode gives "object reference not set as an object" error in miflash tool this time.
Dear sir any suggestion or resolve for that.please help.
Thank you sir
Click to expand...
Click to collapse
Hello,
Voila, a perfectly detailed and unequivocal post as we would like to see more often.
Have you tried re-flashing 10.3NAMMIXM?
Send me the Miflash log (starting with Miflash "version") in private messages.

NOSS8 said:
Hello,
Voila, a perfectly detailed and unequivocal post as we would like to see more often.
Have you tried re-flashing 10.3NAMMIXM?
Send me the Miflash log (starting with Miflash "version") in private messages.
Click to expand...
Click to collapse
Yes sir.
I have tried to refresh again in edl mode for SANTONI_10.3NAMMIXM but gives same error all the time.
Most surprising thing is that just 7 days ago i had been successfully flashed 10.3nammixm
But on the same version miflash tool, same computer, same rom file, this time it gives error: "object reference not set as an object"
Mi flash tool : miflash20220218
I sent you log on private conversation please check.
Thank you for quick response sir.

NOSS8 said:
Hello,
Voila, a perfectly detailed and unequivocal post as we would like to see more often.
Have you tried re-flashing 10.3NAMMIXM?
Send me the Miflash log (starting with Miflash "version") in private messages.
Click to expand...
Click to collapse
Thank you sir for your suggestion.
I have revived again my redmi 4 device.
Flashed an older version of rom santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgz
With miflash-20220218
Thanks again.