Related
Talk about fast! Finally a justification for owning more than one PH1
https://www.essential.com/developer/android-p-developer-preview
Essential ph1
Hi owner of another mystery,
How's your experience with it assuming you checked it out? I'm always reluctant to install OS betas until I've heard some feedback. Thing is, Essential PH1 forums/discussions are virtually non-existent for this SUPERB device! Now that PH-2 sounds like it's dead-in-the-water, I hope but with full confidence that support will continue for the PH-1 as it has all along. Any day we should get a security update; their monthly updates beat the competition by parsecs.
But the P beta, right? Thoughts from any of the intrepid?
So far so good the only crashed I experienced was Asus file manager. Other than that signal somewhat low.... As always a bit spotty. But really enjoying the new features. I was navigating on Google maps and went home the nav window minimized like picture in picture on a TV. Really pleased so far.
If i flash the beta ,when the public reléase gets avaliable i Will ver the ota update ? Or i Will need to flash other stock versión and then proceed with the newest ota?
darkthugs said:
If i flash the beta ,when the public reléase gets avaliable i Will ver the ota update ? Or i Will need to flash other stock versión and then proceed with the newest ota?
Click to expand...
Click to collapse
You will receive ota. The install is pretty much painless.
I have flashed the p preview and can't get NFC to work properly. I have relocked the bootloader and flicked the switch back in developer options. But I still can't get NFC to work on Google Pay. Anyone else have the same problem before I flash back to Oreo again.
Do you get an error? btw the nfc chip is on the bottom back of the phone
srdempster said:
I have flashed the p preview and can't get NFC to work properly. I have relocked the bootloader and flicked the switch back in developer options. But I still can't get NFC to work on Google Pay. Anyone else have the same problem before I flash back to Oreo again.
Click to expand...
Click to collapse
Gotta use either a custom kernel... Or Magisk to hide the unlocked bootloader
I sorted it in the end by relocking the bootloader and I found out that the NFC sensor is at the bottom of the phone and not the top by the camera!
Battery life was very good in 8.1 it is markedly better in 9.0
I just moved to the latest beta by side loading the ota through adb. Everything runs fine except I'm getting pretty high Google play services drain, but no other issues.
Couldn't get Wi-Fi working at all
TheRealKingSen said:
Couldn't get Wi-Fi working at all
Click to expand...
Click to collapse
Flash the july oreo update, then go back ro adb sideload the Android p beta ota, then WiFi will work.
Hi,
I want to buy a cyberpunk edition and i want to know. If it is with hydrogen os or oxygen os ?
If i flash it on oxygen ose, did i loose the special theme and Addons ?
Thanks
OnePlus 8t cyberpunk help.
Hi guy, I'm in the same boat have the opportunity to buy a Cyberpunk edition but have not because I've been told hydrogen os is for China and not a lot can translate to English ? Is this true and I'd loose Google apps ... Editor Dan Lin's latest article says they can all be loaded on is this correct ?
I'm having trouble understanding having a awesome phone like this if you can't upgrade to oxygen os and loose all the cool themes and ui what would be the point ...
So I'd love some in depth clarification of what is going on with these 2 os.
Will you be able to load the cyberpunk ui later in a patch to oxygen os ? So many questions so many review and unboxing but know one is talking about the right topics
Wait for this guy to perfect the conversion
https://forum.xda-developers.com/showpost.php?p=83927241&postcount=83
I just made sure to have my whole phone setup with gapps from the latest global updates. Then when i converted I was able to keep all Google apps. A format nukes them but with root and magisk gapps from flame gapps I was able to get gapps back
g96818 said:
Wait for this guy to perfect the conversion
https://forum.xda-developers.com/showpost.php?p=83927241&postcount=83
Click to expand...
Click to collapse
Yes, but this guy converted a oxygen os to hydrogen os cyberpunk.
Here WE don't want the same...we want a cyberpunk, put oxygen os on it and have all themes...
g4seb said:
Yes, but this guy converted a oxygen os to hydrogen os cyberpunk.
Here WE don't want the same...we want a cyberpunk, put oxygen os on it and have all themes...
Click to expand...
Click to collapse
It needs h2os or it doesn't work. So that won't work for you bro.
FullOfHell said:
It needs h2os or it doesn't work. So that won't work for you bro.
Click to expand...
Click to collapse
In the past, some people extract the oneplus 6t mc laren animations to put it in other 6t.
Perhaps it's possible ?
Or in h2s IS it possible to put gapps ? And other language ?
Staefrosty said:
Hi guy, I'm in the same boat have the opportunity to buy a Cyberpunk edition but have not because I've been told hydrogen os is for China and not a lot can translate to English ? Is this true and I'd loose Google apps ... Editor Dan Lin's latest article says they can all be loaded on is this correct ?
I'm having trouble understanding having a awesome phone like this if you can't upgrade to oxygen os and loose all the cool themes and ui what would be the point ...
So I'd love some in depth clarification of what is going on with these 2 os.
Will you be able to load the cyberpunk ui later in a patch to oxygen os ? So many questions so many review and unboxing but know one is talking about the right topics
Click to expand...
Click to collapse
Where to read dan lin's article
Mine should arrive this week or next, so in the same boat. If English support is optimal and Google Apps can be flashed, I'd like to keep it as close to stock as possible. Has anyone else had experience with HydrogenOS on this phone?
g4seb said:
In the past, some people extract the oneplus 6t mc laren animations to put it in other 6t.
Perhaps it's possible ?
Or in h2s IS it possible to put gapps ? And other language ?
Click to expand...
Click to collapse
I was that guy. I left xda right after that and only returned for 7t Resurrection Remix posts. This will be possible, but won't be done through a mod or it won't be 100%. Yes you can flash magisk gapps. Or with our mod you flash overtop oos and already have gapps. As you can see I'm running latest h2os with cyberpunk resources intact. Locked bootloader and no root. On a normal 8t Global. H2os is normal like oos, but tons of bloat. Once you get rid of it it's ok. But...I don't know about any article, but even with your cyberpunk 8t, it will run h2os and if you flash oos over it you will not keep cyberpunk resources and features.
@FullOfHell : ok so at this time, thé best solution if i buy a cyberpunk edition, IS to have H2Os, put thé gapps, IS this real ?
g4seb said:
@FullOfHell : ok so at this time, thé best solution if i buy a cyberpunk edition, IS to have H2Os, put thé gapps, IS this real ?
Click to expand...
Click to collapse
Yes it only comes with h2os, so if I were you and needed gapps flash these:
https://sourceforge.net/projects/fl....0-basic-arm64-20201108-ALPHA-12.zip/download
Or whatever is recent when you get yours. You install thru magisk. Microg is an option too
Ok thanks
Seems a bad choice from a sales point of view not to be able to run there new Os and keep the cyberpunk themes .. and with new more updated phone coming 2021 the cyberpunk phone will die as everyone will want the latest and greatest not outdated due to a theme. I have a oppo find X2 pro and was ready to swap for the cyberpunk but if you can't get gapps and keep the themes of the phone. Just disappointed.
Is putting the the gapps a simple process or long and tedious ?
FullOfHell said:
Yes it only comes with h2os, so if I were you and needed gapps flash these:
https://sourceforge.net/projects/fl....0-basic-arm64-20201108-ALPHA-12.zip/download
Or whatever is recent when you get yours. You install thru magisk. Microg is an option too
Click to expand...
Click to collapse
What is "Microg" ?
g4seb said:
@FullOfHell : ok so at this time, thé best solution if i buy a cyberpunk edition, IS to have H2Os, put thé gapps, IS this real ?
Click to expand...
Click to collapse
MicroG is a google alternative although I never used it.
FullOfHell said:
I was that guy. I left xda right after that and only returned for 7t Resurrection Remix posts. This will be possible, but won't be done through a mod or it won't be 100%. Yes you can flash magisk gapps. Or with our mod you flash overtop oos and already have gapps. As you can see I'm running latest h2os with cyberpunk resources intact. Locked bootloader and no root. On a normal 8t Global. H2os is normal like oos, but tons of bloat. Once you get rid of it it's ok. But...I don't know about any article, but even with your cyberpunk 8t, it will run h2os and if you flash oos over it you will not keep cyberpunk resources and features.
Click to expand...
Click to collapse
Quick question: how do you flash magisk modules on the canary build? Thanks.
sameog said:
Quick question: how do you flash magisk modules on the canary build? Thanks.
Click to expand...
Click to collapse
The same as you would any other way with magisk. I don't have any modules or root or bootloader unlocked.
Hey guys,
So, I got an 8T Cyberpunk Edition two days ago. And I try to convert Hydrogen OS into Oxygen OS, I downloaded an europe Oxygen OS from here(I did not root the device or unlock bootloader, just download the zip file only), then I copied the zip file to root directory of the device and used "Local Update" to update the phone. After finished, I restarted the device. But I was stuck at booting screen, so I cleaned the "System setting/cache" or even "Format the device". I thought I will see the Oxygen logo after doing those steps, but it never happen. As a result, the Cyberpunk logo came up and still go into Hydrogen OS.
I tried like 5 times using "Local Update", not working at all. I was mad, and then I try to install Qualcomm USB driver(9008 driver?) and then follow the instruction here, and finally it became Oxygen OS, no more Cyberpunk loading screen. I was very happy and then try to apply the latest update from "System Update", it does show me there is a "11.0.4.5" version, so I downloaded it and installed and then restarted. Interesting thing happen again, I saw the Cyberpunk loading screen again. And I was stuck at the loading screen again. In order to pass the loading screen I have to clean "System setting/cache". Then I can access the device again and not seeing any Cyberpunk logo.
So, when I thought everything is finally working now, it wasn't. I went to the "System Update" again and try to see if there is any update, but I saw the same "11.0.4.5" version which I just updated. It seems the update is not working, so I went to "About phone" and confirmed that it was NOT updated. Again I tried several times, not working at all. It just like something under the hood keep resetting the device to the factory status.
Until anyone found a solution for this issue, I think I would have to keep using the version inside the unbrick tool I mentioned above. It will be great if OnePlus release an official Cyberpunk version of Oxygen OS later. Let's wait.
FullOfHell said:
The same as you would any other way with magisk. I don't have any modules or root or bootloader unlocked.
Click to expand...
Click to collapse
@FullOfHell :
So I just need to flash gapps with magisk, Uninstall Chinese applications if i don't need it and all are ok ?
OTA update and all things ??
Or it's better to flash oxygen os, and wait for magisk theme installation ?
Dear all,
Hope you are doing great, I was downloading and installing automatic updates just fine and the other week got a notification about a new update of over 1.4 gbs and the automatic installer was not possible to do and requested me to download it and installing it manually. I downloaded the Rar and everything was going smooth and when I enter TWRP I installed at first shoot without doing any wipe or clear cache or data.
All was installed and it told me to restart the phone, I did that and vroom a vibrating sound happen and got me back to the main screen of Poco and then to TWRP and show me 3 workarounds to clear data and cache and the last resort do a clean flash rom.
I had to end with the last option since I was unable to install the update. What could be gone wrong here? I am back at stock now and I am very sad that this fricking update break all the custom firmware and got me bootlooped
I look for your inputs and maybe I can try again.
Thank you!
You must install Android 11 firmware for newer versions of Arrow as it has switched to OSS vendor.
I was on arrow os 11 so Android 11 was on there, the issue was when I was installing the new update from surija I believe si called the developer.
Do you guys have an idea what did I did wrong? Should You recommend staying vainilla stock miui 12 with root privileges or arrow 11?
Thank you!
I was able to flash the latest version update but I am having a System UI is not responding and got WIFI broken so if anyone is installing this update be careful, does anyone installed the last arrow OS update?
I am currently having issues with the last update, I think I will stick with no updates on the firmware
Sorry I am posting multiple updates on my thread, but I tested it and definetly the last update from Surya break the OS when you login you do not have WIFI and is showing the error I mentioned UI system unresponsive. I installed the version from April from Arrow OS and all works like a charm.
So if anyone reads this be careful with latest release from Surya 5/14 version
Yes, i can confirm. The version I used initially was from april 30. The update from may caused bootloop. I'll be turning off updates when I restore it with miflash.
The main reason I went with arrow is that it is selinux enforcing and supports safety net. But this really makes me think..
@SebixWolf The problem may have been that you flashed arrowos from the wrong miui version. I just miflashed back to the original regional version, flashed twrp again and flashed the R firmware. See https://forum.xda-developers.com/t/...ng-flashing-custom-rom.4274891/#post-85002889
I have an LE2115. I tried to update install CRdroid, and during the process the guide required an upgrade to firmware F18.
I was already on the newest (F20 I think) firmware, so I figured a small roll back would be needed. I downloaded F18 from the CRdroid firmware link, and when it was run it ended up bricking the phone. Annoying, but I didn't think it the end of the world.
To unbrick it I downloaded the MSM global 11.2.10.10 and flashed the phone with A11 (11.2.10.10). I was able to get back into the phone, and everything seemed ok at first glance.
The problem is now I can't install any updates to get it back to android 13.
If I do a system ->system update -> check for updates -> download and install. It says it downloads update LE2115_11.F.17_2170_20021123112, installs it, and reboots.
After rebooting the phone shows a successfully installed update message, but when I look at under About the system is still on Android 11 (11.2.10.10). No change at all.
If I try sticking the OTA zip LE2115_11.F.17_2170_202211231112 in root, and using that for a local update the phone gives me a update failed message after a few seconds. No useful error messages at all.
Can someone point me in the right direction? I can't figure out how to get this off A11 and back to A13 (F18).
This is making me want to rip out my hair as everything I have tried has failed to get me onto a current firmware.
wizardknight said:
I have an LE2115. I tried to update install CRdroid, and during the process the guide required an upgrade to firmware F18.
I was already on the newest (F20 I think) firmware, so I figured a small roll back would be needed. I downloaded F18 from the CRdroid firmware link, and when it was run it ended up bricking the phone. Annoying, but I didn't think it the end of the world.
To unbrick it I downloaded the MSM global 11.2.10.10 and flashed the phone with A11 (11.2.10.10). I was able to get back into the phone, and everything seemed ok at first glance.
The problem is now I can't install any updates to get it back to android 13.
If I do a system ->system update -> check for updates -> download and install. It says it downloads update LE2115_11.F.17_2170_20021123112, installs it, and reboots.
After rebooting the phone shows a successfully installed update message, but when I look at under About the system is still on Android 11 (11.2.10.10). No change at all.
If I try sticking the OTA zip LE2115_11.F.17_2170_202211231112 in root, and using that for a local update the phone gives me a update failed message after a few seconds. No useful error messages at all.
Can someone point me in the right direction? I can't figure out how to get this off A11 and back to A13 (F18).
This is making me want to rip out my hair as everything I have tried has failed to get me onto a current firmware.
Click to expand...
Click to collapse
I have the same device. After the 11.2.10.10 comes C48 first a12 build but it's marked F17 update. Then comes C-66 it's also marked F-17. Take it. Next update you guessed is labeled F-17 and it is actually F-17. Android 13. Then you will get F-18 ota as well. Then have to go into oxygen updater from playstore and update to F20. Latest with Jan sec patch. Since they dropped Android 13 all their device updates for op9 are labeled wrong. After msm you started on 11.2.4.4. I flash lineage and mess with things but mostly stay on stock as it's great and cam is good on os. Good luck. Check out pixelify by Kingsman 44. Real nice for op9 also.
mattie_49 said:
I have the same device. After the 11.2.10.10 comes C48 first a12 build but it's marked F17 update. Then comes C-66 it's also marked F-17. Take it. Next update you guessed is labeled F-17 and it is actually F-17. Android 13. Then you will get F-18 ota as well. Then have to go into oxygen updater from playstore and update to F20. Latest with Jan sec patch. Since they dropped Android 13 all their device updates for op9 are labeled wrong. After msm you started on 11.2.4.4. I flash lineage and mess with things but mostly stay on stock as it's great and cam is good on os. Good luck. Check out pixelify by Kingsman 44. Real nice for op9 also.
Click to expand...
Click to collapse
Ok. Thanks. I will run the update multiple times, and see if I can get to F18.
I can't believe the naming is all buggered up. Ok, well maybe I can believe it. Seems like OnePlus is just not doing a good job anymore, but there are not many other flagship grade phones with unlocked boot loaders and custom roms anymore (and I have been using custom android roms since the touch pro 2 days). It's making me a sad panda.
I just upgraded from a OnePlus 7t to the 9 because I got a crazy good price for an open box phone on clearance. Now I am starting to wonder if I made the wrong decision.
If I have to download 5+ updates every time something doesn't flash right I am going to burn though my 1TB internet cap in no time.
Update:
After ~10gb of updates I got to F18.
Now to go and get a custom rom on this thing, and hope I don't have to unbrick it again.
Hi,
My Xiaomi 12 still hasn't gotten an new update and is stuck on MIUI 13.0.27.0( SLCEUXM) with security patch of oktober 2022.
I would like to get to the latest miui 14 and would like to know what is the best way to manually update this safely with a original ROM?
Should I do this incrementally start at MIUI 13.2.6.0 and then go to the next till I get to the latest or can I just update to the latest MIUI 14 directly?
Tnx
Gradually is the safest method.
Skipped the Beta stables.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Thank you for the quick response.
I downloaded the MIUI downloader app are those ROMS good to?
I need to choose for a recovery ROM and then I can install it with the updater app right? So starting with version MIUI 13.2.6.0 would be the safest?
Downloaded from the site I told you, if the downloaded choice 'incremental update in yellow'.
Then go to OTA, 3 points at the top right, install update (if this does not appear, tap the Miui logo several times).
If it works, try OTA first.
NOSS8 said:
Downloaded from the site I told you, if the downloaded choice 'incremental update in yellow'.
Then go to OTA, 3 points at the top right, install update (if this does not appear, tap the Miui logo several times).
If it works, try OTA first.
Click to expand...
Click to collapse
You mean this one right?
It says it's only around 80mb is that correct?
When it's for a update from Android 12 to Android 13.
Error on my part, take the full rom.
it's the first A13 before yours.
If that doesn't work, download the incremental update of the current rom and then check if an update is offered.
NOSS8 said:
Error on my part, take the full rom.
it's the first A13 before yours.
If that doesn't work, download the incremental update of the current rom and then check if an update is offered.
Click to expand...
Click to collapse
So I tried to install the stable recovery ROM MIUI 13.2.6.0.TLCEUXM but it didn't work I keep getting this message "can't verify update can't flash this stable rom"
Then I tried a newer version recovery ROM MIUI 14.0.5.0.TLCEUXM but same message.
Also tried your suggestion to use the incremental update of the current ROM V13.0.27.0 but then I got the message "can't verify update can't downgrade ROM version"
Do you have any other ideas on how to fix this problem?
Try to change region (Belgium/Usa/change continent/country) and restart afterwards.
Then turn on WiFi and check for updates.
====================================
or unlock the bootloader and you can install any stock or custom rom.
NOSS8 said:
Try to change region (Belgium/Usa/change continent/country) and restart afterwards.
Then turn on WiFi and check for updates.
====================================
or unlock the bootloader and you can install any stock or custom rom.
Click to expand...
Click to collapse
Tried changing the continent/country and turn wifi back on after restart but no updates were found.
I really didn't want to try messing with the bootloader because of the warranty. I also read somewhere Google play services and bank apps not working when its unlocked.
Anything more I could try without unlocking?
Jappie3 said:
Tried changing the continent/country and turn wifi back on after restart but no updates were found.
I really didn't want to try messing with the bootloader because of the warranty. I also read somewhere Google play services and bank apps not working when its unlocked.
Anything more I could try without unlocking?
Click to expand...
Click to collapse
Nope, you can re-lock the bootloader after installing the stock rom.
No need with a Xiaomi Eu rom (certified play store, everything works).
NOSS8 said:
Error on my part, take the full rom.
it's the first A13 before yours.
If that doesn't work, download the incremental update of the current rom and then check if an update is offered.
Click to expand...
Click to collapse
Only thing I haven't tried, is using the incremental update of that version V13.2.6.0 because it was only 80 mb. If I try this update and it works will it then download the ROM information on it's own or something?
Jappie3 said:
Only thing I haven't tried, is using the incremental update of that version V13.2.6.0 because it was only 80 mb. If I try this update and it works will it then download the ROM information on it's own or something?
Click to expand...
Click to collapse
Nope,only solution unlock the bootloader.
Just to be sure I downloaded the 2 latest versions that I hadn't tried yet.
The recovery ROM of version MIUI 14.0.7.0.TLCEUXM and 14.0.8.0.TLCEUXM.
And they both seem to work
Since I'm still on Android 12 now and missed so many updates in-between these 2 latest versions. Would it be safe to install one of these?
Doesn't matter, it will work or not.
Note that if you have a bootloop afterwards, with the bootloader locked you will have to pay to recover your phone (this sometimes happens).
NOSS8 said:
Doesn't matter, it will work or not.
Note that if you have a bootloop afterwards, with the bootloader locked you will have to pay to recover your phone (this sometimes happens).
Click to expand...
Click to collapse
So it's not safe to just install one of these recovery versions manually with the updater?
Jappie3 said:
So it's not safe to just install one of these recovery versions manually with the updater?
Click to expand...
Click to collapse
Never at 100% with forcing.
EDIT:moreover, even regular updates via OTA can lead to a bootloop.
NOSS8 said:
Never at 100% with forcing.
EDIT:moreover, even regular updates via OTA can lead to a bootloop.
Click to expand...
Click to collapse
So it's just a risk of updating no matter what version I use. I never had a boot loop before.
Jappie3 said:
So it's just a risk of updating no matter what version I use. I never had a boot loop before.
Click to expand...
Click to collapse
Zero risk does not exist and this risk increases when you force the update by skipping versions.
NOSS8 said:
Zero risk does not exist and this risk increases when you force the update by skipping versions.
Click to expand...
Click to collapse
Oke, yeah I wanted to do it step by step till I got to the latest miui 14 and still don't get why the older versions don't work.
The only older version I could find that also worked was version V13.0.33.0.SLCEUXM but can't find much about that update.
Logical sequence