My one plus is stuck in Qualcomm crash dump mode, It won't boot into recovery mode, but id does boot fastboot mode, I cant use adb to flash it because my bootloader is locked, adb cant recognize my device. I have tried QDL mode to use Guac msm download tool but it does no good, Can someone tell me what am I doing wrong?
Your best bet is to read up on the msm tread. A lot of answers can be found there.
With a locked BL , I can only suggest msm tool. Personally never got it to work myself but I unlocked my BL as soon as I got my phone so I used fastboot ROM to fix it. Best of luck
Related
I was trying to unroot I was on 9.0.4 and had magisk 17.1 and no twrp since i updated from 9.0.3 or whatever update was before. I factory reset and had no more root, and no twrp. I still had a unlocked bootloader so I went to adb and locked it and then it rebooted and gave me the red message "your device is corrupt and will not boot." it doesnt boot at all to anything not even recovery and I am just in fastboot. I tried MSMdownloadtool but it doesnt work. I am in windows test mode and tried but it would not show up on the msmdownloadtool. It doesnt connect. Also in adb it does not show up. Help me!!!!
it says bootloader is locked now in fastboot though i cannot boot in to anything
i just unlocked through fastboot so now im still stuck with just a unlocked bootloader
ChrisChris123 said:
i just unlocked through fastboot so now im still stuck with just a unlocked bootloader
Click to expand...
Click to collapse
install this - https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
ChrisChris123 said:
i just unlocked through fastboot so now im still stuck with just a unlocked bootloader
Click to expand...
Click to collapse
Msm download should work now as well with your bootloader unlocked
ChrisChris123 said:
i just unlocked through fastboot so now im still stuck with just a unlocked bootloader
Click to expand...
Click to collapse
MSM download will work.
Just download appropriate Qualcomm drivers before proceeding.
Use Volume Up while connecting to PC.
MSM should detect the device connected in any of COM ports.
Just go to this thread https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892 and follow procedures to recover your phone just like how it is when you bought your device. Also, it will lock your bootloader.
Never unlocked or flashed a custom rom on my device since I got it a few years back so its always been on stock.
My phont turned off one night while I was using it aand sicne its been stuck in EDL mode.
Black screen won't boot etc.
Device Manager shows Qualcomm HD-USB QDLoader 9008
I tried diffrent roms and diffrent Mi Flash tools wioth no luck.
In the latest Mi flash I cant flash because of authorisation.
In previous versions I get Waiting for hello packet and Object referance not set to instance of object.
I tried the diffrent firehose files from online.
I am going to try Xiaomi.eu rom and see what happens.
But anyone had this before and can help me get the phone back up and running?
I had a custom ROM installed. One night I just typed "fastboot oem lock" without giving it much of a thought. Than, of course, the phone was bricked. It wouldn't boot and gave the error "The system was deleted" or something like this and since the bootloader was locked and all MiFlash couldn't flash.
The solution was simple. I just used Mi Unlock and it worked. The bootloader was unlocked again. I didn't think it would work.
Hey guys. So i attempted the fingerprint restore guide and it didnt work. I bought the phone second hand and apparently the guy before me unlocked the phone. Long story short, i used the restore tool to bring the phone back to stock state. All was well until i rebooted. Then i got a qualcomm crashdump. I restored again to no avail. I used msmtool to read a couple partitions and it looks like persist partition got corrupted. Only problem is my bootloader is locked due to msm restore, and i cant boot into rom to enable oem unlocking to flash my persist backup. Is there anyway to bypass enable unlocking. Or is there a way to restore persist with msm? Or qualcomm tools? Such a simple problem. Just no tool to flash persist from edl mode. Other devices like oppo have this ability. Why doesnt msm tool flash important partitions????
Did you sell your phone yet? I got stuck with Qualcomm Crashdump, no one at OnePlus knows anything about it apparently. So before the phone tries to boot, hold power + volume up + volume down. Release just in time you'll be in fastboot mode. It's a little tricky but it stops that Crashdump from happening and then you can access your device via fastboot. Then it's just fastboot flash persist persist.img, and whatever else you need to save your phone. You should be able to unlock it again in fastboot then flash TWRP (or just a flashboot version of the ROM) and go about your restoration.
My one plus 7 pro GM1910 is stuck in Qualcomm crashdump mode, so I can't boot up my device and Unlock the bootloader. I can access Adb fast boot but I can't do anything from there because my device is locked. I have tried the MSM download tool from this guide here. But it still keeps getting stuck at Qualcomm crash dump mode showing an error message- Atempted to kill IniT.
Is there any other way to Unlock the bootloader? I will be extremely grateful if you could help me, Thanks.
yoshomo said:
My one plus 7 pro GM1910 is stuck in Qualcomm crashdump mode, so I can't boot up my device and Unlock the bootloader. I can access Adb fast boot but I can't do anything from there because my device is locked. I have tried the MSM download tool from this guide here. But it still keeps getting stuck at Qualcomm crash dump mode showing an error message- Atempted to kill IniT.
Is there any other way to Unlock the bootloader? I will be extremely grateful if you could help me, Thanks.
Click to expand...
Click to collapse
Please follow instructions in this thread to restore. It's the easiest and reliable method
https://forum.xda-developers.com/oneplus-7-pro/how-to/op7pro-collection-unbrick-tools-t3956595
Hi guys, my moto one hyper is bricked. Somehow trying to downgrade the phone I manage to brick it. It's not booting up, it keeps rebooting to fastboot. I can't flash stock ROM through commands. Every command I send fails because the bootloader is locked. I've tried this Motorola software rescue and smart assistant and it didn't find match to the phone. RSD Lite doesn't show the device. So I'm running out of solutions... Does anyone know another method? Something like EDL with QFIL IDK...(I've used that method with Lenovo phones)
Do you have locked the bootloader after upgrading and do you have upgraded to 11?
Do you have tried 'fastboot oem get_unlock_data' or 'fastboot oem unlock ...'?