Related
So I unlocked by Bootloader and Rooted my OP6, the question I have is will the OTA updates be installed without any problems or will I have to install it manually?
Also when I install twrp (I have not installed yet) how will I need to update my phone through OTA?
Sorry if this is a noob question because the last time I rooted and flashed roms the software support was over so I never had any OTA updates.
Thanks
It will download the update but it most probably will download the Full 1.4GB ZIP
Meaning it will install the full rom and not the small update package.
It will install normally to the other slot and after reboot you should be updated.
This should work just fine with TWRP because it updates your other slot within Android, not in recovery.
After update, reboot phone, then reboot to TWRP and install Magisk!
I updated while being rooted and TWRP installed. Just download the update, then reflash twrp and root and everything works fine.
So if u want update your system but don't need TWRP you can just download OTA with system updater and install it.
If you want magisk don't reboot! Open magisk and press install and install to second slot. Then reboot. You will have an updated system with working magisk!
Kollachi said:
So if u want update your system but don't need TWRP you can just download OTA with system updater and install it.
If you want magisk don't reboot! Open magisk and press install and install to second slot. Then reboot. You will have an updated system with working magisk!
Click to expand...
Click to collapse
So the only hitch to get an official incremental OTA update, is the root? Unlocked bootloader and TWRP installed doesn't cause any trouble?
If you just remove the root and then check for the update, evrything gonna be fine, am I right?
But how does it work this "slot a" "slot b"? What does it mean? After an update will your OP6 get 2 roms in the same time? The new and the previous? What happen after an update and the reboot? Have you to delete the old rom?
Thx for the patience...
zappomax said:
So the only hitch to get an official incremental OTA update, is the root? Unlocked bootloader and TWRP installed doesn't cause any trouble?
If you just remove the root and then check for the update, evrything gonna be fine, am I right?
But how does it work this "slot a" "slot b"? What does it mean? After an update will your OP6 get 2 roms in the same time? The new and the previous? What happen after an update and the reboot? Have you to delete the old rom?
Thx for the patience...
Click to expand...
Click to collapse
I didn't even remove root. I can't explain you how this a and b is working. but what I know is, that every OTA is change the partition. And no u won't have 2 systems.
zappomax said:
So the only hitch to get an official incremental OTA update, is the root? Unlocked bootloader and TWRP installed doesn't cause any trouble?
If you just remove the root and then check for the update, evrything gonna be fine, am I right?
But how does it work this "slot a" "slot b"? What does it mean? After an update will your OP6 get 2 roms in the same time? The new and the previous? What happen after an update and the reboot? Have you to delete the old rom?
Thx for the patience...
Click to expand...
Click to collapse
If your current system runs for example on slot "a" the update will be installed on slot "b "...the slot that you currently not using
Nick502 said:
It will download the update but it most probably will download the Full 1.4GB ZIP
Meaning it will install the full rom and not the small update package.
It will install normally to the other slot and after reboot you should be updated.
This should work just fine with TWRP because it updates your other slot within Android, not in recovery.
After update, reboot phone, then reboot to TWRP and install Magisk!
Click to expand...
Click to collapse
So if I flash twrp now, then update OOS, only my root will be removed right which can be again flashed by twrp?
Harsh Keswani said:
So if I flash twrp now, then update OOS, only my root will be removed right which can be again flashed by twrp?
Click to expand...
Click to collapse
Yes, I'm not sure if you will keep TWRP.
But you can always reinstall TWRP and then reflash Magisk
Nick502 said:
Yes, I'm not sure if you will keep TWRP.
But you can always reinstall TWRP and then reflash Magisk
Click to expand...
Click to collapse
Thanks
Nick502 said:
Yes, I'm not sure if you will keep TWRP.
But you can always reinstall TWRP and then reflash Magisk
Click to expand...
Click to collapse
One more thing, everytime I update, it's going to download the full ROM?
Harsh Keswani said:
One more thing, everytime I update, it's going to download the full ROM?
Click to expand...
Click to collapse
If I'm not wrong, on a rooted device OTA installs a full rom. On a not-rooted phone OTA installs just the incremental update.
I only unlocked the bootloader to prepare for TRWP and root (So no TWRP and root yet) and it tells me it will download full update.
TaranQ said:
I only unlocked the bootloader to prepare for TRWP and root (So no TWRP and root yet) and it tells me it will download full update.
Click to expand...
Click to collapse
I guess it recognizes the unlocked bootloader and then it always downloads and installs full update.
Why would you unlock your bootloader and then don't root :laugh:
---------- Post added at 01:15 PM ---------- Previous post was at 01:13 PM ----------
[/COLOR]
pdppdp said:
I guess it recognizes the unlocked bootloader and then it always downloads and installs full update.
Why would you unlock your bootloader and then don't root :laugh:
Click to expand...
Click to collapse
Because I was not sure I wanted root again there are always apps that even with Magisk hide won't work.
But just to make sure I prepared by unlocking bootloader so if I decide to go for TWRP and root my data and storage won't get wiped which would mean starting all over again and losing app-data.
So, if I update from a ROM rooted with TWRP, will not the user data be deleted? Should we just root again and install the TWRP?
I had rooted 5.1.5 with TWRP and Magisk. I just downloaded the full package, copied it to phone storage. Then went to system update, update locally, picked the file and it ran the update.
However after reboot and update complete I lost TWRP and root. So I went to fastboot, booted the official TWRP (fastboot boot twrp.img). Then flashed the official TWRP and Magisk for root, rebooted and all was good again.
I'm pretty sure there's an easier way of doing this but this worked for me.
marvel79 said:
I had rooted 5.1.5 with TWRP and Magisk. I just downloaded the full package, copied it to phone storage. Then went to system update, update locally, picked the file and it ran the update.
However after reboot and update complete I lost TWRP and root. So I went to fastboot, booted the official TWRP (fastboot boot twrp.img). Then flashed the official TWRP and Magisk for root, rebooted and all was good again.
I'm pretty sure there's an easier way of doing this but this worked for me.
Click to expand...
Click to collapse
In theory, with the Oxygen Updater application you can install the OTA and Magisk in 1 step.
sakun-ice said:
In theory, with the Oxygen Updater application you can install the OTA and Magisk in 1 step.
Click to expand...
Click to collapse
Yeah probably but it has a lot of mixed reviews and this takes me 10 minutes more or so oh well. I'll rather do it like this It's not like we get a new update every week
maybe to help you all
me: 5.1.5, unlocked bootloader, unofficial TWRP from thread by wuxianlin, magisk 16.4
my procedure was to change to official twrp which can be done easily by
downloading the twrp installer from official site, put to internal storage
flash twrp official installer
still in recovery, select reboot: recovery
flash magisk
boot system
now download full 5.1.6 signed flashable zip
recovery: flash 5.1.6
reflash recovery
reboot recovery
flash magisk
boot system
now you have rooted 5.1.6 with official twrp and magisk, no wipe needed
After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.
hello there.
sorry for making a new thread .. ive asked my question multiple times no one answered properly. so here's the situation:
just received the phone from china . i'm on android pie hos. and want to update to ob7 . having root and twrp is it the right way to do it? :
1. update to ob7 using local update and full zip file.
2. unlock the bootloader and flash twrp 70 (or 74 i'm not sure?) using adb
3. flash magisk and twrp installer in twrp recovery
4. done!
i heared its better to use twrp 70 and dont know the reason. whats wrong with the latest version?
Not sure if that will work, but locally upgrading from h2OS to OOS worked on my old op6 when I had it.
If it does not work;
Backup your files first then you need to unlock your bootloader.
Then boot twrp via command prompt. Once booted into twrp. Wipe data and do a factory reset there. Flash twrp installer then reboot into recovery.
Flash OB7, twrp installer and magisk then reboot to recovery again and flash ob7, twrp installer and magisk then reboot to system
I'm using .74
Not sure what the problem is/are.
Regards
Dark Fear said:
hello there.
sorry for making a new thread .. ive asked my question multiple times no one answered properly. so here's the situation:
just received the phone from china . i'm on android pie hos. and want to update to ob7 . having root and twrp is it the right way to do it? :
1. update to ob7 using local update and full zip file.
2. unlock the bootloader and flash twrp 70 (or 74 i'm not sure?) using adb
3. flash magisk and twrp installer in twrp recovery
4. done!
i heared its better to use twrp 70 and dont know the reason. whats wrong with the latest version?
Click to expand...
Click to collapse
It can be done but I wasn't happy with it there were loads of bugs.. Issues slowdowns etc.. I would suggest strictly against it..
theocdguy said:
It can be done but I wasn't happy with it there were loads of bugs.. Issues slowdowns etc.. I would suggest strictly against it..
Click to expand...
Click to collapse
so whats the right way to do it
Dark Fear said:
so whats the right way to do it
Click to expand...
Click to collapse
Which route you want to follow twrp or official? If its official i'd say try the msm tool.. That will put you on oldest pie and then you can do OTA..
Twrp is self explanatory..
theocdguy said:
Which route you want to follow twrp or official? If its official i'd say try the msm tool.. That will put you on oldest pie and then you can do OTA..
Twrp is self explanatory..
Click to expand...
Click to collapse
i'm already on oldest pie.. whats the difference of his method with the one i mentioned?
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Hilzerak said:
Just need to flash root after every OTA.
Click to expand...
Click to collapse
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Hilzerak said:
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Click to expand...
Click to collapse
You should you twrp by
remewer said:
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Click to expand...
Click to collapse
Try to in to recovery mode,if not,you try to flash twrp by mau.....
remewer said:
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Click to expand...
Click to collapse
Thx for the info, helps for future.
But know i rebootet.
soihuvuontrang said:
You should you twrp by
Try to in to recovery mode,if not,you try to flash twrp by mau.....
Click to expand...
Click to collapse
Thx for reply but i dont know what excactly do you try to say me.
"You should you twrp by"? What should i try in recovery mode? And im looking forward for an solution without permanent flash, as i sayn above.
Hilzerak said:
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Click to expand...
Click to collapse
The version you tried to boot is not for android 10.
Versions for android 10 are blu_spark 9.108 and 9.109. Unfortunately, i think @eng.stk stopped providing img, but you can download lastest @mauronofrio TWRP and then flash @mauronofrio or blu_spark TWRP
Hilzerak said:
Thx for the info, helps for future.
But know i rebootet.
Thx for reply but i dont know what excactly do you try to say me.
"You should you twrp by"? What should i try in recovery mode? And im looking forward for an solution without permanent flash, as i sayn above.
Click to expand...
Click to collapse
After fashing twrp.img you boot into recovery and flash the file twrp.zip(the same series and name with file twrp.img)then reboot recovery.
I have the OTA file downloaded and I know how to use adb, but I can’t find exact directions on how to do this. Thanks for any help.
tuffluck said:
I have the OTA file downloaded and I know how to use adb, but I can’t find exact directions on how to do this. Thanks for any help.
Click to expand...
Click to collapse
What rom are you on now? Do you have a recovery installed?
Hi ,what
differenceceat vendor by creat ventor 2 in j710f
Pixel Experience based on Android 11 and no I did not do a recovery.
tuffluck said:
Pixel Experience based on Android 11 and no I did not do a recovery.
Click to expand...
Click to collapse
This works for me
Fastboot boot into TWRP,, ( TWRP nebrassy edition)
install trwp via advance settings
reboot into recovery
send a copy of your ota oos over to your phone ,
flash oss ,
reboot into oss recovery
Format data in oss stock recovery
Reboot
just find a way to relock your bootloader, it will revert you to stock completely.