So I unlocked by Bootloader and Rooted my OP6, the question I have is will the OTA updates be installed without any problems or will I have to install it manually?
Also when I install twrp (I have not installed yet) how will I need to update my phone through OTA?
Sorry if this is a noob question because the last time I rooted and flashed roms the software support was over so I never had any OTA updates.
Thanks
It will download the update but it most probably will download the Full 1.4GB ZIP
Meaning it will install the full rom and not the small update package.
It will install normally to the other slot and after reboot you should be updated.
This should work just fine with TWRP because it updates your other slot within Android, not in recovery.
After update, reboot phone, then reboot to TWRP and install Magisk!
I updated while being rooted and TWRP installed. Just download the update, then reflash twrp and root and everything works fine.
So if u want update your system but don't need TWRP you can just download OTA with system updater and install it.
If you want magisk don't reboot! Open magisk and press install and install to second slot. Then reboot. You will have an updated system with working magisk!
Kollachi said:
So if u want update your system but don't need TWRP you can just download OTA with system updater and install it.
If you want magisk don't reboot! Open magisk and press install and install to second slot. Then reboot. You will have an updated system with working magisk!
Click to expand...
Click to collapse
So the only hitch to get an official incremental OTA update, is the root? Unlocked bootloader and TWRP installed doesn't cause any trouble?
If you just remove the root and then check for the update, evrything gonna be fine, am I right?
But how does it work this "slot a" "slot b"? What does it mean? After an update will your OP6 get 2 roms in the same time? The new and the previous? What happen after an update and the reboot? Have you to delete the old rom?
Thx for the patience...
zappomax said:
So the only hitch to get an official incremental OTA update, is the root? Unlocked bootloader and TWRP installed doesn't cause any trouble?
If you just remove the root and then check for the update, evrything gonna be fine, am I right?
But how does it work this "slot a" "slot b"? What does it mean? After an update will your OP6 get 2 roms in the same time? The new and the previous? What happen after an update and the reboot? Have you to delete the old rom?
Thx for the patience...
Click to expand...
Click to collapse
I didn't even remove root. I can't explain you how this a and b is working. but what I know is, that every OTA is change the partition. And no u won't have 2 systems.
zappomax said:
So the only hitch to get an official incremental OTA update, is the root? Unlocked bootloader and TWRP installed doesn't cause any trouble?
If you just remove the root and then check for the update, evrything gonna be fine, am I right?
But how does it work this "slot a" "slot b"? What does it mean? After an update will your OP6 get 2 roms in the same time? The new and the previous? What happen after an update and the reboot? Have you to delete the old rom?
Thx for the patience...
Click to expand...
Click to collapse
If your current system runs for example on slot "a" the update will be installed on slot "b "...the slot that you currently not using
Nick502 said:
It will download the update but it most probably will download the Full 1.4GB ZIP
Meaning it will install the full rom and not the small update package.
It will install normally to the other slot and after reboot you should be updated.
This should work just fine with TWRP because it updates your other slot within Android, not in recovery.
After update, reboot phone, then reboot to TWRP and install Magisk!
Click to expand...
Click to collapse
So if I flash twrp now, then update OOS, only my root will be removed right which can be again flashed by twrp?
Harsh Keswani said:
So if I flash twrp now, then update OOS, only my root will be removed right which can be again flashed by twrp?
Click to expand...
Click to collapse
Yes, I'm not sure if you will keep TWRP.
But you can always reinstall TWRP and then reflash Magisk
Nick502 said:
Yes, I'm not sure if you will keep TWRP.
But you can always reinstall TWRP and then reflash Magisk
Click to expand...
Click to collapse
Thanks
Nick502 said:
Yes, I'm not sure if you will keep TWRP.
But you can always reinstall TWRP and then reflash Magisk
Click to expand...
Click to collapse
One more thing, everytime I update, it's going to download the full ROM?
Harsh Keswani said:
One more thing, everytime I update, it's going to download the full ROM?
Click to expand...
Click to collapse
If I'm not wrong, on a rooted device OTA installs a full rom. On a not-rooted phone OTA installs just the incremental update.
I only unlocked the bootloader to prepare for TRWP and root (So no TWRP and root yet) and it tells me it will download full update.
TaranQ said:
I only unlocked the bootloader to prepare for TRWP and root (So no TWRP and root yet) and it tells me it will download full update.
Click to expand...
Click to collapse
I guess it recognizes the unlocked bootloader and then it always downloads and installs full update.
Why would you unlock your bootloader and then don't root :laugh:
---------- Post added at 01:15 PM ---------- Previous post was at 01:13 PM ----------
[/COLOR]
pdppdp said:
I guess it recognizes the unlocked bootloader and then it always downloads and installs full update.
Why would you unlock your bootloader and then don't root :laugh:
Click to expand...
Click to collapse
Because I was not sure I wanted root again there are always apps that even with Magisk hide won't work.
But just to make sure I prepared by unlocking bootloader so if I decide to go for TWRP and root my data and storage won't get wiped which would mean starting all over again and losing app-data.
So, if I update from a ROM rooted with TWRP, will not the user data be deleted? Should we just root again and install the TWRP?
I had rooted 5.1.5 with TWRP and Magisk. I just downloaded the full package, copied it to phone storage. Then went to system update, update locally, picked the file and it ran the update.
However after reboot and update complete I lost TWRP and root. So I went to fastboot, booted the official TWRP (fastboot boot twrp.img). Then flashed the official TWRP and Magisk for root, rebooted and all was good again.
I'm pretty sure there's an easier way of doing this but this worked for me.
marvel79 said:
I had rooted 5.1.5 with TWRP and Magisk. I just downloaded the full package, copied it to phone storage. Then went to system update, update locally, picked the file and it ran the update.
However after reboot and update complete I lost TWRP and root. So I went to fastboot, booted the official TWRP (fastboot boot twrp.img). Then flashed the official TWRP and Magisk for root, rebooted and all was good again.
I'm pretty sure there's an easier way of doing this but this worked for me.
Click to expand...
Click to collapse
In theory, with the Oxygen Updater application you can install the OTA and Magisk in 1 step.
sakun-ice said:
In theory, with the Oxygen Updater application you can install the OTA and Magisk in 1 step.
Click to expand...
Click to collapse
Yeah probably but it has a lot of mixed reviews and this takes me 10 minutes more or so oh well. I'll rather do it like this It's not like we get a new update every week
maybe to help you all
me: 5.1.5, unlocked bootloader, unofficial TWRP from thread by wuxianlin, magisk 16.4
my procedure was to change to official twrp which can be done easily by
downloading the twrp installer from official site, put to internal storage
flash twrp official installer
still in recovery, select reboot: recovery
flash magisk
boot system
now download full 5.1.6 signed flashable zip
recovery: flash 5.1.6
reflash recovery
reboot recovery
flash magisk
boot system
now you have rooted 5.1.6 with official twrp and magisk, no wipe needed
Related
guys, i read somewhere that magisk affects only the kernal so here's the step i got to have incremental OTA with root.
1)install TWRP
2)backup the stock kernal
3)install magisk
when there is an update
1)install the stock kernal backed up above
2)install the stock recovery
3)update using incremental OTA
can anyone confirm this?
I was on 5.1.5. Twrp n magisk
Got ota 5.1.6. Installed. Flashed twrp and magisk again. All set
Sent from my ONEPLUS A6000 using Tapatalk
Ajaykumar21066 said:
I was on 5.1.5. Twrp n magisk
Got ota 5.1.6. Installed. Flashed twrp and magisk again. All set
Click to expand...
Click to collapse
i am talking about the incremental OTA update. 5.1.6 incremental OTA was of around 230mb whereas the full zip is of 1.4 gb. so i wanna install the incremental update. just wanted to confirm if the above method will work or not.
aneesh12 said:
i am talking about the incremental OTA update. 5.1.6 incremental OTA was of around 230mb whereas the full zip is of 1.4 gb. so i wanna install the incremental update. just wanted to confirm if the above method will work or not.
Click to expand...
Click to collapse
Shouldnt make a lot of difference . Just do incremntal . If twrp is missing flash it with magisk again. Simpple
Sent from my ONEPLUS A6000 using Tapatalk
I hav a question.....im rooted on oos 5.1.6 india with magisk(obviously)...i hav recieved the update for oos 5.1.8...so i dont want to download the full rom can i just uninstall magisk and install the small ota package? Or it will detect the unlocked boot loader and show the same message such as root detected or bootloader unlocked??
Aduser345 said:
I hav a question.....im rooted on oos 5.1.6 india with magisk(obviously)...i hav recieved the update for oos 5.1.8...so i dont want to download the full rom can i just uninstall magisk and install the small ota package? Or it will detect the unlocked boot loader and show the same message such as root detected or bootloader unlocked??
Click to expand...
Click to collapse
that's what i wanted to know..please reply if anyone does know the solution
Aduser345 said:
I hav a question.....im rooted on oos 5.1.6 india with magisk(obviously)...i hav recieved the update for oos 5.1.8...so i dont want to download the full rom can i just uninstall magisk and install the small ota package? Or it will detect the unlocked boot loader and show the same message such as root detected or bootloader unlocked??
Click to expand...
Click to collapse
that's what i wanted to know..please reply if anyone does know the solution
I'm still on stock boot/kernel. I don't need TWRP on my phone. If I need TWRP in the future i'll just use
Code:
fastboot boot twrp-3.2.1-0-enchilada.img
to boot into fastboot.
My procedure for OTA + Magisk Root:
Install OTA (full rom because of root) inside Oxygen OS
Don't reboot!
Open Magisk Manager and go to Settings -> Update Channel -> Beta
Click install and select "Install to Second Slot (After OTA)"
HIt reboot
jzuijlek said:
I'm still on stock boot/kernel. I don't need TWRP on my phone. If I need TWRP in the future i'll just use to boot into fastboot.
My procedure for OTA + Magisk Root:
Install OTA (full rom because of root) inside Oxygen OS
Don't reboot!
Open Magisk Manager and go to Settings -> Update Channel -> Beta
Click install and select "Install to Second Slot (After OTA)"
HIt reboot
Click to expand...
Click to collapse
we are talking about installimg incremental update(small sized zip files) :/
Aduser345 said:
I hav a question.....im rooted on oos 5.1.6 india with magisk(obviously)...i hav recieved the update for oos 5.1.8...so i dont want to download the full rom can i just uninstall magisk and install the small ota package? Or it will detect the unlocked boot loader and show the same message such as root detected or bootloader unlocked??
Click to expand...
Click to collapse
aneesh12 said:
that's what i wanted to know..please reply if anyone does know the solution
Click to expand...
Click to collapse
Why would you guys want to take this risk when the result could potentially be a hard-bricked phone? Incremental updates often replace only parts of critical files, which means that if an OTA patches a modified file thinking it's stock, it may create an unreadable mess. OP is sending you the full package for a reason.
iElvis said:
Why would you guys want to take this risk when the result could potentially be a hard-bricked phone? Incremental updates often replace only parts of critical files, which means that if an OTA patches a modified file thinking it's stock, it may create an unreadable mess. OP is sending you the full package for a reason.
Click to expand...
Click to collapse
Yeah okay i dont hav much problem just that i dont hav good internet speed so downloading a 1.4 gb file for every updats is troublesome???
Aduser345 said:
Yeah okay i dont hav much problem just that i dont hav good internet speed so downloading a 1.4 gb file for every updats is troublesome
Click to expand...
Click to collapse
That's rough, but personally, I would never take the risk to save some download time.
Hello XDA!
It's been a while since I did 'modding' on phones, I think I started with the OP1 back in 2014 but have not really been keeping up ever since. I am now on 5.1.5 and running official OOS with magisk and xposed for gravitybox.. Can I just disable magisk and xposed, do the OTA update and then re-enable or do I have to uninstall them fully? Or can I just do the OTA right now?
Sorry for what might be a really obvious answer.
Thank you!
You can do the OTA but if you want magisk (and then xposed systemless) i suggest you to install TWRP after update and you need in all cases to re-do root process
Hitman478™ said:
You can do the OTA but if you want magisk (and then xposed systemless) i suggest you to install TWRP after update and you need in all cases to re-do root process
Click to expand...
Click to collapse
Ahh I see. Because xposed is now systemless it doesn't matter if I leave it enabled right? Is the new official TWRP without any dangerous bugs?
Thanks for your swift reply!!
maybe to help you all
me: 5.1.5, unlocked bootloader, unofficial TWRP from thread by wuxianlin, magisk 16.4
my procedure was to change to official twrp which can be done easily by
downloading the twrp installer from official site, put to internal storage
flash twrp official installer
still in recovery, select reboot: recovery
flash magisk
boot system
now download full 5.1.6 signed flashable zip
recovery: flash 5.1.6
reflash recovery
reboot recovery
flash magisk
boot system
now you have rooted 5.1.6 with official twrp and magisk, no wipe needed
oneplus6 ha a/b partition. so if you installed magisk 16.4 already. just OTA. when it's done don't reboot yet. enter magisk manager, choose install on the second partition. reboot.
trivita said:
oneplus6 ha a/b partition. so if you installed magisk 16.4 already. just OTA. when it's done don't reboot yet. enter magisk manager, choose install on the second partition. reboot.
Click to expand...
Click to collapse
This will useful only if don't have TWRP, in other case you'll lose twrp in this way
---------- Post added at 15:21 ---------- Previous post was at 15:19 ----------
TheHighLife said:
Ahh I see. Because xposed is now systemless it doesn't matter if I leave it enabled right? Is the new official TWRP without any dangerous bugs?
Thanks for your swift reply!!
Click to expand...
Click to collapse
TWRP official has no bug, the only thing i don't know is if backup/restore is working fine, if you install ota via TWRP and then flash (without reboot) twrp.zip and magisk, after reboot you'll find out that system is exactly the same it was before updating
The only thing u need to disable before updates are overlays through substratum, I also remove any security like finger prints, face unlock and pin or patterns too just in case. Once u flash update u will have to reflash magisk and xposed too
trivita said:
oneplus6 ha a/b partition. so if you installed magisk 16.4 already. just OTA. when it's done don't reboot yet. enter magisk manager, choose install on the second partition. reboot.
Click to expand...
Click to collapse
Did anyone try this?
defsix said:
Did anyone try this?
Click to expand...
Click to collapse
i did this myself
idontcare abt the twrp at all
im perfectly fine with stock recovery
trivita said:
i did this myself
idontcare abt the twrp at all
im perfectly fine with stock recovery
Click to expand...
Click to collapse
Same as that. I'll give it a try next update.
Sent from my Brain using my Keyboard
How do you install to second partition? I only get install or uninstall Magisk (16.70) on the screen. i AM NEW TO MAGISK.
Guys, i am unable to update to latest .161. I have unlocked bootloader, twrp and installed magisk.
Update manager download the update but it fails to update in twrp recovery.
Please suggest. I don't want to lose data.
Can someone provide zip update package so that i can update in twrp??
You have to remove majisk
Relock boot
Then you will receive official update
Then unlock and reinstall majisk
br54 said:
You have to remove majisk
Relock boot
Then you will receive official update
Then unlock and reinstall majisk
Click to expand...
Click to collapse
Since when do you need to relock to install updates?
br54 said:
You have to remove majisk
Relock boot
Then you will receive official update
Then unlock and reinstall majisk
Click to expand...
Click to collapse
freeza said:
Since when do you need to relock to install updates?
Click to expand...
Click to collapse
There is no need to relock.
I didnt whe 110 came out and it still updated... rooted with Magisk as well
@any_thing
Check the ROMs/Kernels/Recoveries section, there's a modified stock recovery that allows for updating w/o relocking the Bootloader.*
Once complete, put TWRP back & root, you will not lose any data/apps/etc...... as you would by simply relocking your Bootloader....
* YMMV,this modified recovery may not be compatible w/your model.
https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085
Sent from my HUAWEI BKL-L04 using XDA Labs
Good luck then.... Personally I don't care.. Mine works fine
any_thing said:
Guys, i am unable to update to latest .161. I have unlocked bootloader, twrp and installed magisk.
Update manager download the update but it fails to update in twrp recovery.
Please suggest. I don't want to lose data.
Can someone provide zip update package so that i can update in twrp??
Click to expand...
Click to collapse
I have the BKL-L04 model & got an update notice earlier today:
While on stock rooted with TWRP & Magisk,the update downloaded & attempted to install,but,it failed.
So,just flash the stock recovery for your model & take the update w/o relocking your bootloader.
You will not lose any data from switching recoveries,at least on this phone.
(If you want to unroot 1st,that's fine,but,not necessary,flashing the modified stock recovery image unroots your phone anyway.)
After taking the update,flash the TWRP & Magisk (& Magisk Manager App,if it disappeared) as you did previously.
Just posting what worked for me,& in no way are my experiences/usage intended to contradict posts/suggestions from others,especially if they have the exact same model of phone as yours.
Hope this helps. :good:
any_thing said:
Guys, i am unable to update to latest .161. I have unlocked bootloader, twrp and installed magisk.
Update manager download the update but it fails to update in twrp recovery.
Please suggest. I don't want to lose data.
Can someone provide zip update package so that i can update in twrp??
Click to expand...
Click to collapse
Just install stock ram disk...
It would automatically remove twrp and root.. And u will b able to install update once updated just reflash twrp ram disk and install magisk zip to get root back..
That's how I did it on c675
(--light--) said:
Just install stock ram disk...
It would automatically remove twrp and root.. And u will b able to install update once updated just reflash twrp ram disk and install magisk zip to get root back..
That's how I did it on c675
Click to expand...
Click to collapse
will i lose my data?
any_thing said:
will i lose my data?
Click to expand...
Click to collapse
No not at all... Ramdisk is a different partation
I had rooted phone with magisk installed, I received 2 updates like that - automatically lost root privileges, but I didn't receive .161 update (EIS update still not available for me?) any way to get this update?
PS my bootloader is unlocked... do I need lock it to get an update? and how to lock it?
Hi!
I have a OP6. Running rooted stock with BluSpark TWRP and Magisk. Some months ago I rooted it and I was running 9.0.1 or 9.0.0, not sure which one. I then updated to 9.0.2 OTA a week or so later. I can not remember the exact procedure, but everything worked fine. Today I installed 9.0.3 OTA and then used Magisk (18.0) before reboot to install it to slot A (9.0.2 was on B). Somehow, I ended up with a wiped device and stock recovery. Can anyone help me to find my potential fault in this? I don't want it wiped during the next OTA, it's a real hassle to set up everything again. I remember that I checked a guide that had tips on OTA, but I can't seem to find it.
Best.
yogra1921 said:
Hi!
I have a OP6. Running rooted stock with BluSpark TWRP and Magisk. Some months ago I rooted it and I was running 9.0.1 or 9.0.0, not sure which one. I then updated to 9.0.2 OTA a week or so later. I can not remember the exact procedure, but everything worked fine. Today I installed 9.0.3 OTA and then used Magisk (18.0) before reboot to install it to slot A (9.0.2 was on B). Somehow, I ended up with a wiped device and stock recovery. Can anyone help me to find my potential fault in this? I don't want it wiped during the next OTA, it's a real hassle to set up everything again. I remember that I checked a guide that had tips on OTA, but I can't seem to find it.
Best.
Click to expand...
Click to collapse
I had the same thing happen to me. I missed the part where I flash TWRP right after the OTA. That probably triggered the factory reset
So instead of rebooting, I should do a "fastboot boot IMAGE" and then install the bluspark twrp zip from inside that one? I guess I can boot up to TWRP and install Magisk as well after this while I'm at it?
Are you flashing from twrp?
If so,flash ROM zip
Flash twrp zip
Reboot to twrp
Flash magisk
Done.
If ur doing it from Android
Install ROM,when it asks you to reboot, DON'T
go to magisk app
Go to modules
Search for a/b twrp (you should only find one module)
Install it ,don't reboot
Go to main magisk screen
Press install,install, install to inactive slot (after OTA) after it's done you can REBOOT.
The module keeps your twrp
Flashing magisk to inactive slot will root the update you just installed
I was installing the OTA normally, without TWRP. It worked just fine last time.
You shouldn't install any OTA if you are rooted.
Only full roms.
yogra1921 said:
I was installing the OTA normally, without TWRP. It worked just fine last time.
Click to expand...
Click to collapse
Sent from my ONEPLUS A6003 using Tapatalk
I understand. But it doesn't change the fact that it worked like a charm last time. I just assumed there might be a general way.
RASTAVIPER said:
You shouldn't install any OTA if you are rooted.
Only full roms.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
On OOS it knows if you are rooted and will download full ROM,so it's fine if you install a/b twrp magisk module after (keeps twrp) and then install magisk to inactive slot .
What happened here is he probably forgot to install twrp and magisk probably got to the wrong slot, hence the wipe
Not only probably. I did not install TWRP after the OTA. And I probably got the Magisk slot right (I installed it to other slot though the manager). Thanks for your help!
So next time:
OTA
Check if all dev USB-settings are enabled (?)
Shut off
Boot to TWRP
Install TWRP
Install Magisk to new slot
Boot up
Seems right?
yogra1921 said:
Not only probably. I did not install TWRP after the OTA. And I probably got the Magisk slot right (I installed it to other slot though the manager). Thanks for your help!
So next time:
OTA
Check if all dev USB-settings are enabled (?)
Shut off
Boot to TWRP
Install TWRP
Install Magisk to new slot
Boot up
Seems right?
Click to expand...
Click to collapse
no.... you do what i wrote like 3 posts up.. DO NOT REBOOT!!
After every single rom flash, TWRP, from android or fastboot or whatever way you install any rom TWRP will be replaced, aswell as boot.img (magisk is there)
OTA
DONT REBOOOOOOTT!!!
go to magisk, search for A/B twrp module, install it
DONT REBOOT
Go to main screen of magisk
install, install, install to inactive slot.
done..
your way will wipe TWRP.
From twrp:
Flash rom zip
flash twrp
reboot to twrp
flash magisk
done
Oh yeah. I completely forgot about that the TWRP retention script exists. Perfect. This is exactly what I did last time. Thanks!
Dears,
I have a OnePlus 6 unlocked and rooted with magisk and TRWP.
Currently I'm running stock firmware: oxygenos 10.3.
I got a message from system to update to 10.3.1.
Last time (when I have to update to 10.3) I tried to update in every way but without success and at the end I had to format everything and I lost my data.
So here is my question: which is the correct procedure to update software?
Thanks!
Look in TWRP and Root for OnePlus 6 on Oxygen OS 10 Stable/Beta thread
So you need to download latest Oxygen zip which is 042 buil if I'm not wrong...put it on your phone if you already didn't done that...then reboot to TWRP...and here starts the procedure....I HIGHLY RECCOMEND TO DO A WIPE WITHOUT FORMATTING INTERNAL STORAGE ONLY DATA...FOR AVOIDING ISSUES...but you can go without it...so here we start
Boot into twrp
Flash oxygen os zip(latest)
Flash twrp
Reboot to twrp(if it says no os installed just ignore it and swipe reboot anyway)
Flash magisk
and your done...thats it...nothing could go wrong.... I'm always doing it this way....
ilpratti said:
Dears,
I have a OnePlus 6 unlocked and rooted with magisk and TRWP.
Currently I'm running stock firmware: oxygenos 10.3.
I got a message from system to update to 10.3.1.
Last time (when I have to update to 10.3) I tried to update in every way but without success and at the end I had to format everything and I lost my data.
So here is my question: which is the correct procedure to update software?
Thanks!
Click to expand...
Click to collapse
For me, the phone downloaded the whole package instead of just the little OTA. I let it install it, bit did not let it restart it. Then I went to magisk modules and installed "twrp-keep". Then in magisk manager I had it install magisk on the other slot. Then I restarted the phone. Everything worked great.
tabletalker7 said:
For me, the phone downloaded the whole package instead of just the little OTA. I let it install it, bit did not let it restart it. Then I went to magisk modules and installed "twrp-keep". Then in magisk manager I had it install magisk on the other slot. Then I restarted the phone. Everything worked great.
Click to expand...
Click to collapse
Try this method... im also done my update like this!
my way of doing it
Here's what i did and it didn't took me long at all i'm a newbie
I unroot my phone via magisk
install os 10.3.1 then flash twrp and root my phone again.
Dears,
Thanks for the replay.
I forgot that I was without TWRP.
What I did, and it worked, is:
- uninstall magisk manager by magisk
- install full update
- reboot
- flash by fastboot boot.img patched by magisk.
Thanks again