Related
Hello everyone!
First of all sorry for my bad English. I represent smartphones distributor from Kiev, Ukraine. We have contacted with GooApple sales director and have got GooApple V5 sample phone for tests before bulk orders.
All I can say: it's just not ready for international market at the moment and unfortunately they are not very much interested in positive firmware or hardware changes.
They have made firmware ios_11.12.08 for our last recall but non of our issues have been resolved + one added: it doesn't react on first home button push after lock screen, it only shows unlock screen after the second home button push or fast twice push.
Here is our issues list:
Phone's battery draining, runs out too fast!!! After full charge it runs out 75% battery life for 4 hours of usage: 1 call during 5 min., video watch during 8 min., music during 6 min, looking thought photos during 5 min., taking 3 pictures with the camera. 1,5 hour is just for walkthrough over the interface, settings, lock/unlock. 3,5 min. video takes about 5-6% of battery life. And it's without any gaming, internet surfing, making videos. Other time it's just holding.
Screen has some lightness flickering. Backlight blinking, flashing a little bit from the sides and left top corner.
Connect button (in putting Wi-Fi password mode) doesn't work. Just can't connect to any locked Wi-Fi network.
Bad Wi-Fi catch signal even with a close to phone router.
Doesn't remember icons location on springboard bar after moving around and reboot the phone.
Showing the last called phone number in background when sending USSD commands (checking balance or any anything else).
The input keyboard should be the same as iOS with working English and Russian (now it doesn't work) and customization ability in the General folder in Settings.
Booting animation should be the same as iOS with Apple logo only.
Creating folders (put in and put out icons) and moving icons around doesn't work properly.
The font in Calendar, Time, Dial is not the same as iOS.
The sim card pin code enter should be the same as iOS.
How to delete apps like Call Log, PowerOff... chinese QQ and others?
Reminders, Maps, Weather Stocks iReader apps should be in English.
Browser app should be renamed to Safari.
Gallery app should be renamed to Photos.
Phone key at dialpad should be renamed to Keypad.
Must speed up fake iOS usage response, performance.
Must speed up screen rotation/orientation response.
Must replace red ! (exclamation) to the Sending progress bar when sending messages/SMS.
Must replace chinese word to english word Call at the dial pad.
Make possibility of adding your own ringtones in the Settings.
Make double tap or pres hold the home button for multitask, running apps view like on iOS with appear at the bottom of the screen.
Make possibility of completely close/kill apps taking up memory and running in the background.
Make dialing numbers sound quieter (it's set to max by default).
Make lock/unlock sound quieter (it's set to max by default but should be possible to customize).
Make full-screen camera mode when taking photos.
Correct + - add sound mode when playing video, music (quiet sound from 2 to 6 bars and after 6 bars it's big increase in sound).
Remake Videos app (it should redirect/open phone's gallery instead of SDcard content).
Remake YouTube app (it should be in English or redirect/open youtube.com).
WLAN folder in Settings should be renamed to Wi-Fi.
Phone warms up when gaming, talking, videos.
It doesn't recognize sim card enter when ON.
Word Wednesday comes out of the Calendar app icon.
Power On/Off button dangles, swing around with sound.
Upper background part can be seen when charging.
While start pinching any picture from the center it zooms in with imprecision to the side of the picture.
Battery life doesn't shows properly on lock screen (it shows all empty when screen corner shows less of 20% battery life).
It Reboots by itself few times during the day when locking the screen.
If you know any other issues please add them by numbers 39, 40....
Or if you have solutions for any of the issues please also add it by the 1-38 numbers.
I hope we can make it better together!
Possible Solutions to Gooapple V5 issues.
Generally speaking, I don't think that all these reasons are real for every V5 phone around. Did you wipe out every data BEFORE flashing the new rom? If not, certain applications may have been running multiple times (i.e.: Maps in my case when I did that). I am using the android rom (not the iOS one) and I have not all these problems whatsoever.
Possible solutions:
1. Try and see if you have data enabled or GPS is on. This device has a hardcoded (R) Roaming on (i.e. you can't turn it off) plus it's not (yet) capable of 3G data. Turn both of them off while not needing them helps A LOT.
2. Not an issue here with newest android build; maybe your screen has issues. I've had some friends with original iPhones having the same flickering as yours. Turned out to be their retina display.
3. Not true. I'm connecting on both my wifi spots at home both Wep and WAP/PSK. Wifi is low powered though and need you to be NEAR the wifi router / spot (see below).
4. True! Just 5 meters away and a mid-wall makes the difference. They really need to boost their receiver.
5.Try reinstalling AFTER you've made a complete wipe data/factory reset. THEN install the rom. This might fix the issue.
6.I'd really like to see a list of USSD commands if you have one available for this phone... (pm me??? )
7.Same for Greek keyboard. I've overcame the problem by installing Greek Input Method from the market.
8.Heh. +1
9.It works for me for both android and iOS roms.
10,11.I agree.
12.You'll have to be 'root' to do so. The only way I've found to do so is the program superoneclick (google it). After rooting the V5, download from market 'Root Uninstaller'. Works perfectly even with the 'protected apps' like the one you mentioned. I know that you don't have 'market' on iOS rom so here's what I did:
I've had a factory reset first, then installed Android rom and THEN the iOS rom. I've also installed a program called 'Go Launcer EX'. This pops up when unlocking the device asking you what launcher you prefer, this way you have the best of both worlds.
13-16: Agree.
17 & 18: The problem is the retina display with the slow (relatively) 650MHz MTK6573 processor. The G3 (previous model) had a smaller screen that the cpu was able to handle. On android rom things are better though...
19 & 20: Agree.
21: On android you can do so by adding your custom ringtones on a folder called /alarms, /ringtones etc on your sd card. Should work for us too (didn't try it yet).
22. Agree.
23. I am using an app from market called: Advanced Task Manager does the trick.
24-31. Agree.
32. I didn't go that far!!! I guess you're right.
33 & 34. Yep.
35 & 36. I haven't got such a problem. Consider the retina screen of yours has a problem / issue?
37&38. Nope. Works alright here.
Finally another issue with no solution:
39. GPS lock. The GPS won't operate properly in EU (Greece) where I live. Takes forever to find satellites and it won't lock to a fix point even if you wait 10 mins. This is what I'm after right now and if I have a proper solution I'll post it here.
Thanks for putting up this thread Cyber_dude. If you need anything I'll be more than glad to help!
Thanks for your reply.
We have talked with GooApple for about a week now and sure I have made all needed such as wipe data before firmware update. That's because you are basically using Android ROM. Customers buying phones like this one because they just want iPhone for less and want everybody else think they got an iPhone. So using Android on any iPhone replica is just not right. It should run fake iOS and should be at least 60% of the original one. This phone costs $300 icnl. shipping at resellers (price of used iPhone 4 on eBay) and I think user interface should be well polished and flawless for that money.
Yes, Maps on last gooapple_ios_11.12.08 works in English now. But after resolving one problem they made two others, like it doesn't react on first home button push after lock screen, it only shows unlock screen after the second home button push or fast twice push.
1. That's not a solution! Sure I have turned everything like wi-fi, gps... off. But customers want it to be fully functional phone, without thinking: "ohh., have I turned my phone's wi-fi and gps off to kepp the battery alive?" It's shouldn't be like that!
They have you used so low capacity 1050mAh battery. (but we think it's even less). The original iPhone's has 1420mAh. And there are even 2200-2430mAh on the market today. They have changed screen, ram, cpu but keep the same battery. It's just stupid. And it's smaller then iPhone's battery so you just can't replace it. It works maximum up to 3 hours in active usage mode without gaming. (with full brightness on, because turning it less on this screen is just sacrilege).
That's they have answered about that: "when making a phone, we have to consider a lot of things, especially the cost, when everything is as great as iphone 4, the price will be too..."
2. Yes, it's old issue, it resolves after reinstall.
3. It's true. It works on you because your wep password is large then 8 characters. It doesn't work with less passwords like mac or iPhone.
5. Yes, new firmware resolved that.
6. I mean USSD commands for checking balance.
But here is a command to enter EngineerMode: *#67876#*
7. Stock keyboard is a crap. I use Smart Keyboard Pro.
8. I can change robot with apple booting animation but can't change gooapple name at the beginning. I think it's logo.img at the rom zip file. I have tried to delete it and make other changes to the rom but can't sign it. It's always shows sign error at the install.
9. It works but it works very-very badly. Then you are trying to move icon to other position it creates a folder with other icon, it's so annoying.
12. I have also made the root with the SuperOneClick. And delete Chinese apps with Root Explorer.
Thanks for Go Launcer EX advise. What else it can help us with?
17 & 18. They used MTK6513 it's cuted MTK6573 without 3G. It's not the best one anyway.
21. Yes, I also want to try to add custom ringtone to media directory folder.
23. Yes, I also use Advanced Task Killer Pro on gooapple_ios_11.11.30 but they have added double tap home button like iPhone to kill running apps on gooapple_ios_11.12.08
35 & 36. These issues are real and haven't resolved on new roms. That's not screen problem, I can make a screenshot if needed.
37. This one is also real. Can also make a screenshot.
38. Haven't seen this issue on gooapple_ios_11.11.30
39. Maybe you should try to test it in EngineerMode Have you tried to use any other GPS third-party application?
I didn't know about this issue because I haven't tried GPS, no need with this battery.
Do you know how to replace chinese word (Call) to english word Call at the dial pad? Because it's immediately catches the eye when using. I have decompiled the Phone.apk with APK Edit program but all image files are normal over where, chinese word is not an image file. I don't know how to change it.
Just lets keep this thread go by adding new issues and how to solutions.
Got my V5 about 2 weeks ago. Been playing with it for a while - tried both the newer roms and currently running the ios version that is made available about 10 days ago. Been working fine for me, except I may gps is very slow (can take up to 10 minutes for it to find me), and the built in FM Transmitter does not work. I also have various chinese apps which I was not able to delete. I will try the latest rom to see what improvemements it has.
Question, how did you root the phone? I downloaded superoneclick, but keep getting hung on the "waiting for device". I have usb debuggin on, and tried it both with "usb connect" on and off (the setting in the phone to establish a usb connection to a PC). Instead of using this "usb connect" feature, do I need to download some type of usb driver for this phone? If so, can you provide details? I've tried various usb drivers for MT6513 but nothing yet works - even tried something called PDANet which installed some type of software oin the phone and said it was connected, but still the superoneclick failed. Any ideas?
Oh, by the way I found a vending.apk that works on the ios rom. See link below
http://www.mediafire.com/?khpvzmzwwaqyxdm
Thanks
I have uploaded the drivers for GooApple V5, here is the link: http://www.mediafire.com/?h6hr1ckrf3sc7cj
How to root your GooApple V5:
Make sure you use Win XP.
Download drivers file from the link above and unzip it.
Phone Settings -> Applications -> Unknown sources, on
Phone Settings -> Applications -> Development -> USB debugging, on
Phone Settings -> Applications -> Development -> to keep awake, on
Phone Settings -> Applications -> Development -> Allow analog location, on
Connect the data cable, turn on USB storage in the phone.
In the Windows Device Manager (http://en.wikipedia.org/wiki/Device_Manager) find your phone, open properties and install or update the drivers from the unzipped folder.
Reboot your computer.
Now download the SuperOneClick from here: http://forum.xda-developers.com/showthread.php?t=803682 If you run XP, install .NET Framework v2.0 or above.
Shut down your antivirus/firewall.
Turn off USB storage in the phone. Make sure you do not mount the sd card.
Run the SuperOneClick BOOT process. If it's not success from the first time try it again.
After that install the Root Explorer to your phone, go system/app, push Mount R/W button and delete any app you want.
Thanks for the vending.apk, here are also some tips for it: http://www.addictivetips.com/mobile/how-to-install-new-android-market-2-2-6-on-your-device/
Cyber_Dude, thanks for the engineering mode code. You've done a nice job on the rooting info. Just for the story: I've done it on W7, 32bit and worked alright too. Newest superoneclick has the ability to forcibly ask for Admin privileges. Drivers have to be installed manually though.
I've found out into the Engineering menu that there's a CPU Frequency test that reports a high of 806MHz. THAT would be awesome to have when needed. Do you have any *working* utility that is able to over clock the MTK6573 CPU of it? I've tried some from the market but with no luck whatsoever.
Some info on the WiFi boosting would be helpful too. I've been digging into the /etc directory and found out several conf files that may, or may not do the job. I'd rather not alter the values on my own though...
Ah, finally another addition:
There seems to be an issue importing/exporting my contacts from the phone to google.com. Plus the Account and Sync options on the settings menu isn't reporting the respective field (i.e.: only Picassa, books and gmail is able to sync. Contacts is not on the list).
Thanks.
Cyber_dude - thanks for the rooting details. Got my V5 rooted today, and it worked from my vista laptop (didn't need a xp PC). I deleted the 9 chinese apps no problem including the chinese market app.
The vending.apk I provided works whether you root or not - however now that I'm rooted I will keep your instructions in mind if I want to upgrade to a different market version.
I'm still on the Dec1/2011 ios rom - anyone know what the newer ios rom (Dec10/2011) has to offer? I have tons of apps and settings personalized, so I'm not really wanting to wipe the phone to load the latest ios rom unless I know it will have some improvements.
Only problems I still have, which I would appreciate feedback on, are:
1) gps is very slow to find my location (can take up to 30 minutes). Funy thing is that as I scroll on the map it refreshes fast, and I can find addresses and streets, but it just can not find my location?
2) ther built in FM Transmitter does not work - would love to get this working since I do not have bluetooth stereo in the car. FYI - found other fmtransmiiter.apk apps on the net - can I just replace my existing same app on systems/bin to make it work?
Thanks
Have you tried it with the 'new' Android UI ROM? How does it perform? I'd really like to see some videos - youtube only has 13 and I've seen them all ..
DanADaMan said:
Only problems I still have, which I would appreciate feedback on, are:
1) gps is very slow to find my location (can take up to 30 minutes). Funy thing is that as I scroll on the map it refreshes fast, and I can find addresses and streets, but it just can not find my location?
2) ther built in FM Transmitter does not work - would love to get this working since I do not have bluetooth stereo in the car. FYI - found other fmtransmiiter.apk apps on the net - can I just replace my existing same app on systems/bin to make it work?
Thanks
Click to expand...
Click to collapse
1) Same thing here. From the data sheet (from Mediatek) of the MTK6573 (which this phone has) the update location should be as fast as 10ms (that's 1/100 of a second) so something is DEFINITELY wrong.
2) I think you'll have to 'sign' it somehow. There are some apps that are supposed to provide 'signed' apps but never got to work with one; so I have no experience.
Cheers
macsga, DanADaMan, you are welcome.
I think cpu overclocking is not in time now and it also can make even worse. But we'll be glad if you can find any good, stable working app for that and test it. The only thing need to be overclocked now is the iOS UI, it should have to be polished well to match the original one.
For WiFi boosting, have you tried Wifi Fixer or Wifi Analyzer, you can change your WiFi channels with it.
GPS chipset is very bad. It's just a copy, fake phone, so they have used the cheapest hardware parts for it, we should reconcile to it. Unless they somehow fix it in new firmware, but I don't think it's gonna happen in near future. The main market for this phone is China, so they don't hasten with any international changes. As GooApple sales director said to me: "we sold more then 500pcs aday, should this problem happend to every phone, i think all the phone should return to us". So maybe chinese people are just not as demanding as we are, and they are happy with the phone? Anyway, I think with a good administrative force all listed issues can be resolved in just one week.
By the way, as I know they are planning to produce new phone in January with the 3G support. No info about any other new hardware at the moment.
Meantime we have to add new issues to the list:
39. GPS is very slow to find my location (can take up to 30 minutes).
40. Built in FM Transmitter does not work.
41. Importing/exporting my contacts from the phone to google.com. Plus the Account and Sync options on the settings menu isn't reporting the respective field (i.e.: only Picassa, books and gmail is able to sync. Contacts is not on the list).
42. In last gooapple_ios_11.12.08 firmware it doesn't react on first home button push after lock screen, it only shows unlock screen after the second home button push or fast twice push.
Updates in the last gooapple_ios_11.12.08 firmware:
Increase in task manager.
Blocking state to increase unread text message reminder.
Debug chinese QQ picture upside down.
Some Google applications added (en maps, gmail, voice..)
Task Manager.
Standby SMS prompts.
Double-click the home button shows running/standby apps and kill possibility like in original iOS.
Plus issue 42 added.
I haven't tried all new features in gooapple_ios_11.12.08 I don't want to use it because of the 42 issue. Now I'm using previous gooapple_ios_11.11.30 version. If anyone already installed and running the gooapple_ios_11.12.08 please give us your feedback.
DanADaMan, maybe you should try to make the data backup in stock recovery mode first and install firmware update after that? Maybe this should keep all your apps in and give you the new firmware? (haven't tried by myself)
jontelang, Sure, Android UI works much better with it, but I personally don't want to use it on this phone, it would be too simple and means you gave up making iOS UI ROM better.
As a side note, I've noticed that the phone is able to provide extraordinary 2D & 3D performance. I don't agree with the comment "It's just a copy, fake phone, so they have used the cheapest hardware parts for it, we should reconcile to it." you posted earlier Cyber_Dude, because I've seen cheap devices and this is nothing like it.
I do believe that the dev team has issues supporting the phone chipset due to the novelty that presents at the current time. This processor came out only at the end of June 2011 (fairly new).
News about MTK MT6573 Processor
Monday, June 13, 2011 3:25:26 AM America/Los_Angeles
Since the release MTK MT6516 processor, there is lots of Android phones in the market, which support GSM network and dual SIM card smartphone. But later, when Qualcomm, Broadcom and other smartphone processor manufacturer access into the field, mtk's dimmed. MTK MT6573 is the only hope in the future.
The end of June, 2011, we will share the latest trends with you, with the following new star.
Time: the first smartphone with MT6573 processor has been assembled, the major integrators, solution providers have had contact with, the reaction generally very good, have begun to prepare the relevant program models. As far as know, next month the first smartphone with MT6573 processor will unveiled.
Performance: As MT6573 is positioned in the low-end smartphone, we should not expect performance of deification, but the actual test performance to facilitate more than Qualcomm MSM7227, while MT6573 with the 3D acceleration in the multimedia DSP will give you a surprise. Currently sent to the integrators, solution providers of 3G features are still several prototype debugging.
Programs: MT6573 and MT6516 share same pins, and the both chips can be exchange without any hardware change, this will save cost on design for smartphone manufacturers.
Click to expand...
Click to collapse
Via: http://android-sale.com/blog/news-mtk-mt6573/
macsga, But have you test it side by side with the iPhone 4 (not talking about 4S)?
Sure if comparing with other copies it's a winner. It's the best choice if you want to buy an iPhone replica for the price of the used iPhone 4 and you're not too picky. But it's a huge contrast with the original iPhone 4 UI performance, speed and hardware. And at the present time it's not totally ready for the wide international market due to the all listed issues. That's why I have started this thread, all together we can make it better. Unfortunately GooApple's dev team/engineers do nothing for it, local market and the new phone's version is their main goal at the moment. I know that because I've contacted with the GooApple sales director for the last 3 weeks.
As I have posted before they used MTK6513 it's cut MTK6573 without 3G support. It's good but not the best one. Anyway CPU is not the main problem of GooApple V5. The low capacity battery is much bigger failure. The android-sale.com is just a reseller, they can write anything they want to sell the phones more efficiently.
Hehe, I do have a 4s and (you're right) side by side there's nothing like it. That's why I gave up on iOS UI and turned to the android native one. I do believe that it's a perfect android testbed though. And for 230 Eur (retail price) that the 32Gb model cost me; well I can't really complain.
So; I totally agree! Let's try and make it better
The UI might be faster if you lower the resolution (i.e.: draw @ 480x320 and not the retina native resolution this phone has). It's zoom capabilities should cover the gap and reduce choppiness. Of course, this is just a crazy thought of mine...
macsga, Where have you got it for 230 EURO for 32GB? Official resellers like android-sale.com and rofen.net selling 32GB model for $319.99 (245 EURO) without shipping cost.
How could you lower the resolution? And why? If you want lower resolution you just should buy cheaper GooApple 3G version and it has faster UI response: http://www.youtube.com/watch?v=WqAevweocKs
Cyber_Dude said:
macsga, Where have you got it for 230 EURO for 32GB? Official resellers like android-sale.com and rofen.net selling 32GB model for $319.99 (245 EURO) without shipping cost.
How could you lower the resolution? And why? If you want lower resolution you just should buy cheaper GooApple 3G version and it has faster UI response: http://www.youtube.com/watch?v=WqAevweocKs
Click to expand...
Click to collapse
I got it before the EUR/USD was at 1/1.29 which is what you just calculated . The lower resolution (magnified) would in my opinion give the fast and smooth feeling the 3G has.
As per why I didn't go for the 3G, I did not, because of the retina display the V5 has. The official replacement for a retina display from Apple goes up to 390EUR+pnp, where I got the whole phone for 230 (OK plus 11$ shipping). In the meanwhile I have an android phone to play with (apart from my 4s). Fair deal.
I just wiped the phone and tried to load the ios 12-08-11 rom. Got an error something about not being a signed rom. I reinstalled the ios 12-01-11 ios rom no problem.
Anyone else have problems loading the latest ios rom?
Thanks
is this real?
i have heard that the Gooapple v5 is very good, and it is the same display as the real iphone 4, and can exchange with the iphone 4 display, does this ture?
DanADaMan said:
I just wiped the phone and tried to load the ios 12-08-11 rom. Got an error something about not being a signed rom. I reinstalled the ios 12-01-11 ios rom no problem.
Anyone else have problems loading the latest ios rom?
Thanks
Click to expand...
Click to collapse
There are newer ones from 2011.12.10 on http://rom.gooapple.com use those. Hopefully you won't have the same issues. Correction: Unfortunately the new Android one is not signed- The iOS though works OK
---------- Post added at 05:07 PM ---------- Previous post was at 05:01 PM ----------
lovebargaining said:
is this real?
i have heard that the Gooapple v5 is very good, and it is the same display as the real iphone 4, and can exchange with the iphone 4 display, does this ture?
Click to expand...
Click to collapse
Yes, it's real. You can watch exchanging one another, on youtube here:
http://www.youtube.com/watch?feature=player_embedded&v=s7nUkSdzOqo
The flickering at the corners of the screen is annoying on mine, has this developed from the latest ROM or did you guys see it in previous? I've only had it a few days and updated straight away. I've resorted to the android UI cos the IOS one was sluggish but am more than happy to swap back to help?!
What I did find was GTA III kills this phone. On launch the intro plays but as the game launches the screen goes black and the phone will not respond to any button pressing for an hour, then I think it kills the process and the phone comes back. Just don't try, unless someone can tell me otherwise?
Mine responds on one click of the home button right now but Wireless is pants and so is GPS!
---------- Post added at 09:48 PM ---------- Previous post was at 09:35 PM ----------
How do I tell if I loaded 2011-12-08 or 2011-12-11?
I downloaded them on the 15th and loaded the Android one without any complaints of it being unsigned? Did it over the top of the version it came with though so not fresh install...
EDIT:
Thought it was worth adding how to get into engineers menu:
Dial “*#67876#*”
Is there a way to turn WiFi Tx from 20 to 40 or even more?
I need to root mine still
I never noticed flickering and I have to say that the latest 'iOS' rom is a bit faster on my device resulting in a rather good imitation while the previous was very choppy.
The only drawback is that the UI crashes every now and then. I do like the 'long press' function of the home button that is able to kill apps in the 'official' iOS mode plus I think for the 1st time since I owned this phone that I like more the iOS UI to the android one.
I do have to offer a couple of tips that I found through my xda search:
1. Using a program like Root Explorer (root) you may want to make the following directories as Read Only: /data/tombstones and /data/system/dropbox
This has as a result, that the phone won't be able to log into the main phone memory thus trimming down your available space.
2. *IF* you're using the iOS UI version of the rom you can safely(?) remove the following apps (I state them as bloatware) via Root Uninstaller (root):
-QQ input method and keyboard
-Chinese market
-Chinese Youtube (Yuku)
-Chinese Maps
-Chinese Weather (3 entries, remove all three)
-Chinese iBooks (Google books does the job)
3. Add the following app: Locale Select from the Market and choose your language of choice.
4. If you search the xda site you will be able to find signed Google Apps that (most of them) work with this phone.
Ah, one last thing: I found the best player for playing p0r... erm, Movies, MoboPlayer with the additional ArmV7VFP3 plugin. Supports almost every codec and srt file out there and respective char encodings. Please ignore the message: This program is not compatible with your device. Works like a charm, I swear.
Cheers.
After installing the N8000XXALGA_N8000OXXALG5_PHE_RootGalaxyNote.com via Odin, the message "Unfortunately, S Note has stopped working" pops up every 5-9 seconds.
How do I resolve this situation?
Losing S-Note is not to be considered a preferable option.
The tablet is currently not really usable, as S-Note appears to be relaunching and crashing, so I can get one click, touch, or gesture between notices.
I wanted root access to avail myself of the market enabler, so I downloaded the pre-rooted ROM that's supposed to be reliable and stable, and it's supposed to keeps things stock, except for the fact that the tablet would then be rooted.
But now, I get an error message every 5 seconds telling me that S Note stopped working.
I can now get one click in, in between notices. What's worse, I can't temporarily stop S Note, to at least disable the warning, and let me try to do something.
I can't use my tablet, at all. And I haven't any other ROMs handy (except for the Jelly Bean leak).
But all I wanted was STOCK rooted... Not headache.
All I want is to use market enabler so I can download geometriq. Is that too much to ask for?!?!?
In my despair, I went into recovery mode and hit the factory reset button. I restarted my tablet as if brand new, all my files gone, my settings rearranged to default, everything... I would have backed up, but without root, I couldn't get Titanium Backup installed, previously. Now, even the demo stuff that comes with SNote is missing. Although, everything seems to be working, now.
manhattan212 said:
All I want is to use market enabler so I can download geometriq. Is that too much to ask for?!?!?
Click to expand...
Click to collapse
You don't need root for that. Isn't market enabler an app for devices which don't have install unknown sources in settings? I had that app on my old phone. Note has the option built in. Note 10.1 settings, in security, has option to check unknown sources. Which allows you to install apps from other sources and not just marketplace. Works well for me as ive installed tons of apps that way and wasn't from marketplace.
If that's not what you mean then my bust
demandarin said:
You don't need root for that. Isn't market enabler an app for devices which don't have install unknown sources in settings? I had that app on my old phone. Note has the option built in. Note 10.1 settings, in security, has option to check unknown sources. Which allows you to install apps from other sources and not just marketplace. Works well for me as ive installed tons of apps that way and wasn't from marketplace.
If that's not what you mean then my bust
Click to expand...
Click to collapse
What you're referring to I think is the allowing of unknown sources. That's a little different from what I'm trying to do.
On a slightly different but still relevant note -no pun intended... Can I re-install S Note; if so, how?
Re-install your stock rom using ODIN... This will give back all stock apps...
Then go here - http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/ and follow the instructions... This will give root access to your stock rom (n8000) and you don't have another countries CSC...
ultramag69 said:
Re-install your stock rom using ODIN... This will give back all stock apps...
Then go here - http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/ and follow the instructions... This will give root access to your stock rom (n8000) and you don't have another countries CSC...
Click to expand...
Click to collapse
Thanks for the reply.
But, that's exactly what I had done.
However, you know that initial collection of notes that are included, in a stock ROM?
My S Note is still missing that.
When I launch my S Note, it's barren
-not a single solitary note.
That's why I wasn't sure if reinstalling the ROM installed a brand new S Note, or what.
And that's why I was asking about reinstalling S Note itself.
As soon as you start a new note (+ key) it will give you the option of what note template you want to use...
And if you have installed an OTA to the latest you will now have a landscape template...
ultramag69 said:
As soon as you start a new note (+ key) it will give you the option of what note template you want to use...
And if you have installed an OTA to the latest you will now have a landscape template...
Click to expand...
Click to collapse
Thanks again for the reply. And thanks for bringing the landscape template to my attention; my S Note includes this template...But I'm not referring to the templates... I'm referring to the initial four Books, I think it was, that are included.
I'm not really sure what all I'm missing out on,
due to the absence of these included readings, that are missing from my Note 10.1
(I think one of these notes or a couple of the notes, are manuals).
But, beyond that, I really really want the ability to have a note/memo [like S Memo's widget allows].
On my S3 I have a whole pane dedicated to an instance of the widget.
I keep a list of things I need to do, on it; and it's always staring at me, without me having to do anything at all -I don't need to launch an application, I don't need to click any shortcuts, or go to any folder -it's just there..
And when I need to edit it or add something to it, I just simply double tap the screen, without having to launch any apps or go to application folders, or anything.
S Note has the mini app -but the mini app is REALLY always there, as in you can't get away from it, unless you close it.
And more importantly, for as long as it's there, it's editable, so it's prone to accidental smears.
S Note is an alright piece but it's just shy of gimmicky.
This S Memo feature, which enables users to take the S Pen and write a note -and keep it indefinitely handy is slightly harder to find. I've found other memo apps and note taking apps that are close -but never quite right. Some don't allow you to hand write (you have to keyboard your info in); and others don't offer this ever so wonderful widget...
This has become a tangential rant, hasn't it?
Sorry...
I just want S Memo for my note 10.1
I think I also had this issue after installing the pre-rooted European ROM on a US N8103.
I managed to find a solution - too late for you now though
1) Installing Titanium Backup Root + Pro Key via the Play Market in Windows
2) In TB Freezing S-Note and then wiping the cache (Swipe Left on the Apps Backup Properties to get to the Special Properties) I also tried wiping the Apps Data but that didn't make any difference.
You could do the same thing in Application Manager but I think it would take about 20 minutes scrolling down to maybe get to S Note whilst the message popped up. Alternately you could add a short cut to the home screen and try long pressing and dropping on to App Info - which you could maybe just about do between pop-ups.
I guess you could stick a recovery on it and just wipe the cache full stop?
[EDIT]
BTW how did you get on with the OTA didn't work out so well for me
manhattan212 said:
Thanks again for the reply. And thanks for bringing the landscape template to my attention; my S Note includes this template...But I'm not referring to the templates... I'm referring to the initial four Books, I think it was, that are included.
I'm not really sure what all I'm missing out on,
due to the absence of these included readings, that are missing from my Note 10.1
(I think one of these notes or a couple of the notes, are manuals).
But, beyond that, I really really want the ability to have a note/memo [like S Memo's widget allows].
On my S3 I have a whole pane dedicated to an instance of the widget.
I keep a list of things I need to do, on it; and it's always staring at me, without me having to do anything at all -I don't need to launch an application, I don't need to click any shortcuts, or go to any folder -it's just there..
And when I need to edit it or add something to it, I just simply double tap the screen, without having to launch any apps or go to application folders, or anything.
S Note has the mini app -but the mini app is REALLY always there, as in you can't get away from it, unless you close it.
And more importantly, for as long as it's there, it's editable, so it's prone to accidental smears.
S Note is an alright piece but it's just shy of gimmicky.
This S Memo feature, which enables users to take the S Pen and write a note -and keep it indefinitely handy is slightly harder to find. I've found other memo apps and note taking apps that are close -but never quite right. Some don't allow you to hand write (you have to keyboard your info in); and others don't offer this ever so wonderful widget...
This has become a tangential rant, hasn't it?
Sorry...
I just want S Memo for my note 10.1
Click to expand...
Click to collapse
**FIX**
manhattan212 said:
After installing the N8000XXALGA_N8000OXXALG5_PHE_RootGalaxyNote.com via Odin, the message "Unfortunately, S Note has stopped working" pops up every 5-9 seconds.
How do I resolve this situation?
Losing S-Note is not to be considered a preferable option.
The tablet is currently not really usable, as S-Note appears to be relaunching and crashing, so I can get one click, touch, or gesture between notices.
Click to expand...
Click to collapse
I had the same issue after flashing the root injected stock ICS through ODIN. I was going from a rooted JB Rom (that did not work, and was not JB.. AA not the best site.)
Anyways the only way I was able to fix it was to painfully go through the Settings>Applications>All>S-Note Clear Cache/Data, and Force Stop.
It's tedious as hell, but it works. Your lucky yours is popping up every 5 minutes mine was about every 30 seconds took awhile to get through those menus! Hope this solves your issue!
Hi I am new at this, but any help would be appreciated
Is it possible to take a Samsung galaxy tablet and
1. Remove everything having to do with the internet (make it a device that cant search internet)
2. Remove all the apps I don't want.
3. Keep camera, and music player working
4. Use it as a shell for making an application that I can read books and applications that go along with reading the book
example.
A. When reading the book, I can tap a sentence and it becomes underlined, from hear I can cut and paste it to another application via a menu that pops up when a sentence is tapped
B. When a sentence is tapped it is underlined and I can choose via a menu to highlight that sentence YELLOW or to assign that sentence
a title like "Humor". If the sentence was humorous I could assign it to a note pad app under the heading "Humor"
Basically to use the tablet as a shell for reading and applications that working with books.
Nope
So since you are new, ill give you a break but the thing is, you sound like you should make a whole new operating system/ROM
And Samsung is not your company if you want to make large edits. Samsung always tries to keep things how they want it.
So I don't think there is a single public ROM that disables WiFi, so you will either have to make one yourself if you have any experience with system development, there you go. And on Android I doubt that itself will be an easy task so maybe making a Linux variant to run on a tablet will be another different bet.
So good luck, happy developing
Sent from my SGH-M919 using xda app-developers app
a easy way mabey.
ok if its like my galaxy ring there is a custom rom to download.
note i belive it does void your warranty even though the rom is set by samsung.
also i dont know what rom they provide or its features.
to download the custom rom if your device has the option try holding volume down+power key at power up.
please note till i found this by accident on my galaxy ring i had never considered installing a custom rom seirously before.
With a Linux variant does it matter which kind of tablet you use. You said Samsung might not be the best....would kindle fire be better?
Essem G said:
Nope
So since you are new, ill give you a break but the thing is, you sound like you should make a whole new operating system/ROM
And Samsung is not your company if you want to make large edits. Samsung always tries to keep things how they want it.
So I don't think there is a single public ROM that disables WiFi, so you will either have to make one yourself if you have any experience with system development, there you go. And on Android I doubt that itself will be an easy task so maybe making a Linux variant to run on a tablet will be another different bet.
So good luck, happy developing
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Definetly Not
Liquidex648 said:
With a Linux variant does it matter which kind of tablet you use. You said Samsung might not be the best....would kindle fire be better?
Click to expand...
Click to collapse
The best variant to use without a doubt would be nexus 7, or any Google Play edition phone. They all ship with unlocked bootloaders so flashing is just that much easier
I got the Mate 20 X from Italy, delivered two weeks after order on November 12 for € 829, VAT and 2-years warranty included. It is a nice silver device 6/128 (don’t need more memory). My first hands-on impression? I was shocked.
I had pure Chinese phones before (Huawei and Lenovo) and I know how to deal with them. That wasn’t what upset me. And it wasn’t EMUI either, I like some of its functionality and I know how to customize it.
But my previous phone was Mate 10 pro (international, not Chinese), which really works well and comparison with a newcomer is what really shocked me. The EVR_AL00 came slow and clumsy with those big fat letters and ugly ios-like icons on the screen. I tried to improve the look with increasing the smallest width in the developer options, but original resolution came back with every reset.
So what I did first, is factory reset (I usually perform it on every new phone). I lost Google Play but I didn’t care, I intended to install and adjust Google apps anyway.
And then I started to customize the phone. Basically, it means “dechinezed” and “deiosinezed” it and make it usable for my purposes as the daily driver. Eventually, I succeeded and like before I don’t regret that I bought the Chinese phone as I never regretted before. I believe that my customization demands would request almost the same amount of work and effort with the “international” version.
And with “dechinezed” I don’t mean to be impolite, actually, I like some of the features of China phones, some of them after years comes to western phones as well (night sight, close all apps etc). I just prefer the more Android look of the phone (even more than currently, Google delivers).
The actual status of my phone is as follows:
In the beginning, when I started phone manager, the performance never exceeded 69%. It seems that later it adapted and healed itself (maybe with help of AI) and now performance is usually over 90, close to 100% and the phone suddenly becomes snappy and smooth, slightly better than Mate 10 pro. As expected, the battery life is due to its capacity and with my way of use it could easily survive two days. I don’t have exact data on SOT and other parameters of the battery performance yet. By adjusting the text and display size (both too small) under settings/display the phone gets a nicer look and more usable size of applications.
I had decided to keep EMUI launcher before I learned that the phone has a hard time with other launchers. I bought Nova Prime once, I consider it a great launcher, maybe the best, but even on my previous phone I used EMUI. The reason is in its features that I don’t want to sacrifice: dedicated Accuweather, swype gestures (now with 9), dark mode. I was never a fan of ios-like white themes, I always considered that Android’s color is black. Besides, what even Google admits now (and started to return black mode into its apps accordingly), the white mode consumes a lot more energy (especially with AMOLED). What is yet to admit is that it burns your eyes.
So, what I have now, is a fully customized EVR_AL00 that perfectly suits my needs. That means that it looks like Android, works like Android and behaves like Android. I replaced most Chinese apps with Google’s ones, installed additional that I use and tune the system. With tuning the system I mean screen adjustment and customization. Under Settings/Display/text and display size, I changed both values to small and thus converted ugly appearance of the display into something that suits size and purpose of the phone. I replaced IOS icons with the Android ones. Adjusted notifications and permissions for each application.
First I was thinking about keeping some Chinese apps that I considered useful, like Sky Mobile and a few others. But trying them I found out that all of them are more or less connected either with Chinese environment or payment system and therefore eventually I removed them all. After I had to perform the factory reset I was only got more careful with apps that I disabled. And according to my orientation, I kept Email, at least until Google implements dark color in Gmail. And kept useful utilities: (Manager, Gallery, Remote…).
Otherwise, I use Google Phone (the amazing last beta from: https://forum.xda-developers.com/android/apps-games/app-google-phone-v14-0-175904292-bubble-t3708218, thank you Martin), Messages, Translate (removed nonfunctional MS Translate), Auto, Duo, Voice, Photos, Trips, Pay, Assistant, Lens, Google, Chrome, and of course all Google system apps. I also use third-party apps like VLC, Xiaomi calculator and YouTube vanced. Pretty much everything works as expected, including notifications to the extent that suits my way of use. After I erased Hivoice, Assistant works together with the hot word, if the screen is turned on (never wished to use it from turned off screen). The red mic on notification bar of the attached picture shows that assistant is active.
All banks application work. Google Play is not working at the moment but I expect that it will eventually. Currently, failure is the result of poor synchronization between Chinese EMUI and Google Android. No point to call the bank, it is the last one to solve the problem. The problem will be solved with the new EMUI or Play Services, because there is no material obstacle for G Play (SafetyNet passed and bank card is recognized and could be used online). I have another identical payment system installed (Inteso SP) and it works flawlessly.
CUSTOMIZATION
In order to adapt the phone to my needs, I had to deal with existing Chinese application first. I had to either: 1) remove them, 2) hide them, or 3) disable (erase) them.
Removing apps
Removing apps was easy. Just uninstall Chinese in Settings/Apps. As I said, I did it thoroughly and indiscriminately.
Hiding apps
My overall objective is to have only one home screen page. I’m fed up with slippery pages interfering with gestures. And besides, I decided to use gestures (swype) as system navigation and therefore swyping between homepages could be annoying even more.
In order to have only one home page, I have to use folders and hide auxiliary functional apps (like download, OTA, backup, clock..etc).
Surprisingly I found that Tweaker for Huawei works pretty well with EMUI9, although it is an old application: https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.emuitweaker&hl=en. One of its functions is triggering the abandoned EMUI gesture that enables hiding any application and thus removing it from the home screen without affecting its functionality.
Disabling (erasing) apps
To “remove” any nonremovable application without root you need a computer with the adb command-line tool. In fact, this method never removes any application, rather disables and hides it for the current user. So it doesn’t affect OTA and it doesn’t revert after reset either. It does come back after factory reset though.
The method of erasing an app works through adb (so adb must be installed on the computer – either Windows or Linux) and it requests the following syntax in command line:
1. adb devices (and after that setting permission on the phone)
2. adb shell
3. pm unistall -k --user 0 <package name>
where <package name> is not the name of the application as it shows but the name of the installed package, which must be discovered and one of the apps which could do that effectively could be found here: https://play.google.com/store/apps/details?id=pl.itto.packageinspector&hl=en.
(for example: pm uninstall -k --user 0 com.huawei.wallet)
A basic idea what to disable could be found here: https://forum.xda-developers.com/note-10/how-to/guide-to-remove-apps-root-t3828324. Of course, what to disable always depends on personal preferences and therefore this list should be taken with a grain of salt.
So, after arranging applications there comes the final stage of making the phone Android again. EMUI makeover. For that, we need this EMUI editor: https://play.google.com/store/apps/details?id=com.mixapplications.themeeditor.
But there is a bad news. It doesn’t work with EMUI 9 (yet). What now? There are two possibilities: either finding a good theme and simply installing it (there are plenty of them, only I didn’t test if they are working with EMUI 9 (some of the android likes are to be found in the Playstore under Hamzio7 or here: https://forum.xda-developers.com/mate-10/themes/pure-black-theme-emui-8-t3719904.
The other possibility is to find a phone with EMUI 8 and compile the hwt file there and transfer it to Mate 20 X. That is what I did. The system will warn you that it is an old version of the theme and it might not work well but skip that. It works just fine.
Don’t judge the solution by my design. I’m a modest guy, more practically oriented. You may have almost any design that you wish.
And of course, if you decide to experiment with this stuff yourself, you should be aware that you are the only one taking the risk. I honestly believe that you can’t, if you are not extremely innovative, irretrievably destroy anything, but even factory reset might be sometimes really annoying.
Good luck with your brand new Chinese Mate 20 X.
Great post Just a couple of questions:
1) Are your notifications working perfectly? By that, I mean without delay under both wi-fi and mobile networks, with screen on and screen off? If so, what did you do to achieve this?
2) Do you mind sharing where did you buy the device from?
Nice job! Looking even more forward to the arrival of my Mate 20 X!
@piskr
Would you mind give some steps to get google phone and Messages to work properly. When phone call comes in, my phone call screen does not come on. Messages only works sometime and sometime message does not send. Thanks.
Genoveffo said:
Great post Just a couple of questions:
1) Are your notifications working perfectly? By that, I mean without delay under both wi-fi and mobile networks, with screen on and screen off? If so, what did you do to achieve this?
2) Do you mind sharing where did you buy the device from?
Click to expand...
Click to collapse
1) Yes, notifications work flawlessly in my extent of use, both with the screen on and off. I don't use exotics like telegram or whatsapp though. It's a matter of permissions and notification settings. Be aware that each notification had to be set separately and checked under application and under notification sector under settings. And also have in mind that if you install the third party phone, it is just addition of original phone (under app/system processes), and the later must remain active and has its own permissions and notification as well. Phone app has different system structure than SMS. You can simply erase Huawei messaging and replace it with the Google one (haven't tried others).
2) You can find here both color and memory variants: https://www.ilmultistoredelzazza.eu...l_Sim_EMUI_9_Android_9/p1748191_19236868.aspx
wingzero said:
@piskr
Would you mind give some steps to get google phone and Messages to work properly. When phone call comes in, my phone call screen does not come on. Messages only works sometime and sometime message does not send. Thanks.
Click to expand...
Click to collapse
You should really carefully check and set both permissions and notifications for each application. And remember that you mustn't neglect the system phone app.
piskr said:
You should really carefully check and set both permissions and notifications for each application. And remember that you mustn't neglect the system phone app.
Click to expand...
Click to collapse
I checked all the settings and seem to be correct unless I missed some steps.
wingzero said:
I checked all the settings and seem to be correct unless I missed some steps.
Click to expand...
Click to collapse
OK. Here are my settings.
You do know there's an EVR-L international models, right? Why not just get that instead? That's what I have.
piskr said:
OK. Here are my settings.
Click to expand...
Click to collapse
Thanks for taking the time to post the screen shots. All my the settings are the same except I don't the phone app on your last screen shot. Did you download it or it's a stock app?
---------- Post added at 04:13 PM ---------- Previous post was at 04:11 PM ----------
MishaalRahman said:
You do know there's an EVR-L international models, right? Why not just get that instead? That's what I have.
Click to expand...
Click to collapse
It's too late. I already bought the China version. It's too much hassle try to sell it.
wingzero said:
Thanks for taking the time to post the screen shots. All my the settings are the same except I don't the phone app on your last screen shot. Did you download it or it's a stock app?
---------- Post added at 04:13 PM ---------- Previous post was at 04:11 PM ----------
It's too late. I already bought the China version. It's too much hassle try to sell it.
Click to expand...
Click to collapse
That's right, the last one is Google phone from the link I published and it works just fine (I really recommend it, it has so many opportunities). But you have managed to get notifications neither on the home screen nor on the lock screen? Neither for messages nor for the phone? If I were you I would go from setting to setting for this two apps and inspect every item very carefully. It is possible in this early stage of EMUI9 that it has some weird glitches occurring randomly on some phones but it is not very likely. A small overlooked detail in settings could mean everything.
Otherwise, I don't regret that I bought the Chinese version. Now I've got everything that I would have with the international variant. Only I don't have working Google pay yet, but so far I haven't seen a clear statement that it really works on international Mate 20x either. To work means to be able pay with the phone not only loading a card, that's what I did too. Otherwise, I got a good price (€660 before VAT), integrated call recorder and rooting opportunity.
And regarding crap, international one has it too. I've got international Mate 10 pro and I know it. Besides Chinese one additional western, baked in (MS, Facebook, Google's and third party's).
@piskr
The phone will ring on the google phone app but the screen does not come. I will play with the settings and figure it out. Thanks for all the help.
Thank you. This helped get me to a non-Chinese specifc phone.
Attachin my ADB run.
UPDATE: Please check out AJ's great thread https://forum.xda-developers.com/mate-20-x/how-to/guide-remove-apps-adb-t3870727
I mistakenly removed one item (com.huawei.android.hwouc) I shouldn't have and I amnot getting OTAs (which I also turn off automatic ones in dev options, but if I want one, I lost it them).
Rudolpht said:
Thank you. This helped get me to a non-Chinese specifc phone.
Attachin my ADB run.
Click to expand...
Click to collapse
As I'm not well schooled on ADB. How would you apply this? And why 2 Zips? Gracias
See beginning of the thread and other threads on ADB. Same list, mine in txt or zip, same file, not necessarily good for everyone.
Sent from my HWEVR using XDA Labs
def-g said:
As I'm not well schooled on ADB. How would you apply this? And why 2 Zips? Gracias
Click to expand...
Click to collapse
Here's my Spreadsheet with a quick guide in it along with the adb files you'll need.
https://forum.xda-developers.com/mate-20-x/how-to/guide-remove-apps-adb-t3870727
Once you get the list of packages on your AL00 just run the fastboot command to remove each one.
wingzero said:
@piskr
The phone will ring on the google phone app but the screen does not come. I will play with the settings and figure it out. Thanks for all the help.
Click to expand...
Click to collapse
Wondering if you had any luck. Some people actually use a phone as a phone
Sent from my HWEVR using XDA Labs
Rudolpht said:
Wondering if you had any luck. Some people actually use a phone as a phone
Sent from my HWEVR using XDA Labs
Click to expand...
Click to collapse
I got it working. I am using the stable v.25 version. What I did was after selected the google phone as default dialing app, I go back to default apps and click the stock phone and then click the google phone again. I did this by chance and luck. Hope this will solve your issue. The stock phone app is horrible. Make sure you use the stable version. Good luck.
wingzero said:
I got it working. I am using the stable v.25 version. What I did was after selected the google phone as default dialing app, I go back to default apps and click the stock phone and then click the google phone again. I did this by chance and luck. Hope this will solve your issue. The stock phone app is horrible. Make sure you use the stable version. Good luck.
Click to expand...
Click to collapse
Thanks man.
Sent from my HWEVR using XDA Labs
Now it's 27. And so far everything work. Regarding comments on the forum we are on the privileged side. Just be sure to set notifications and permissions right.
Software Download - Ulefone
Software Download,Support
www.ulefone.com
Hey everyone,
I just wanted to help spread the word that there is an official Android 12 ROM for Ulefone Power Armor 13.
This was not publicly announced anywhere as far as I know.
Your phone will NOT receive an automatic update for this (at least as far as my experience goes).
The only way to currently upgrade to the ROM is via the SP Flash Tool.
The only reason I know about this ROM is because I just happened to be looking through their website.
Find it here!
Software Download - Ulefone
Software Download,Support
www.ulefone.com
Edit:
I should note - if you do a full wipe & flash this ROM, it WILL flash you a new IMEI number
This IMEI number will be the same IMEI number for everyone running this ROM fully wiped.
benhall847 said:
Software Download - Ulefone
Software Download,Support
www.ulefone.com
Hey everyone,
I just wanted to help spread the word that there is an official Android 12 ROM for Ulefone Power Armor 13.
This was not publicly announced anywhere as far as I know.
Your phone will NOT receive an automatic update for this (at least as far as my experience goes).
The only way to currently upgrade to the ROM is via the SP Flash Tool.
The only reason I know about this ROM is because I just happened to be looking through their website.
Find it here!
Software Download - Ulefone
Software Download,Support
www.ulefone.com
Click to expand...
Click to collapse
I keep getting an "incorrect scatter file format" error when attempting to flash using SP. Either I'm doing something wrong or they messed it up.
Benovite said:
I keep getting an "incorrect scatter file format" error when attempting to flash using SP. Either I'm doing something wrong or they messed it up.
Click to expand...
Click to collapse
What SP Flash Tool version are you using?
I flashed with SP Flash Tool v5.2216
Another tip - move the ROM folder inside the SP Flash Tool folder.
benhall847 said:
What SP Flash Tool version are you using?
I flashed with SP Flash Tool v5.2216
Another tip - move the ROM folder inside the SP Flash Tool folder.
Click to expand...
Click to collapse
Oh gosh you name it. I went thru numerous versions, some antiquated, some supposedly being the latest versions. Definitely used v5.22, probably twice if not more.
Thanks for the tip about moving the ROM folder. I figured the solution might have to do with the placement of the ROM folder or the SP flash tool folder(possibly both on C: drive) but I just kept on getting the same annoying error message. I'm gonna take your advice right now as a matter of fact. Hopefully it'll work for me as I'm assuming it did for you.
Incidentally, you probably know this already...about the wireless update section having the ability to apply updates 'locally' as well. Tried that a couple of times but no go. Just before you replied I was gonna try the old 'update from recovery mode' but I'd rather try your approach.
Here we go(again!)
Ok.... I'm back. What's it been, over 4 hours since my last post? but in truth I can't claim to have been pulling my hair out for that long. Maybe 2 and a half lol.
>Alternate response: Wow. That was not fun. I somehow managed to boink my phone to seemingly do nothing but start in Fastboot mode.
**But wait, let me give credit and thanks where it's due to benhall. That little tidbit of advice that practically Everyone neglected to divulge about putting the ROM folder in the SP flash folder- a crucial step btw- was the key to getting Android 12 on my PA13. So ben, thank you very much. My deadened eyes sparkled when instead of constantly seeing 'stop feeding me this trash', the little balls of processing hope began-a-spinning to indicate that, yes Virginia, put that dang ROM folder in the SP folder. Again, never saw that in any instructions or any god-awful video that some people made to show how it's done, but instead irritate beyond belief because of their insistence of loud techno music as they talk, or babies yelling in the background while - ok I'm stopping. It was stressful to say the least because I knew I was almost there.
ANd to be fair I actually ended up watching (again) that one video that Ulefone condones on YouTube with the silent Asian (?) guy speeds thru the steps using that client sp thingy with the PDF instructions that Ulefone pushes. I tried SP v5.22 and 6.22 for that matter, but they just weren't working for me. Most likely entirely my fault, but I finally went back to square one with what they suggested and I went over that video again and again and finally....it took!
So, Android 12. It's big, had to reduce the display size because everything is Huge. Visually appealing, nice to get an update.
Funny thing is, sorta like benhall, I happened upon Android 12 in Ulefones Google Drive folder(just bored snooping around). But I was like Whoa we got 12¿?¡! Googled for a quick sec, found this thread cause like the man said it hasn't been mentioned or reported about at all it's so new. If you know you know.
Hey man glad I could help!
Yeah I tried that just out of a hunch & it worked for me haha.
Same thing on my end - no tutorials anywhere mention to do that.
benhall847 said:
Hey man glad I could help!
Yeah I tried that just out of a hunch & it worked for me haha.
Same thing on my end - no tutorials anywhere mention to do that.
Click to expand...
Click to collapse
I've had mostly Samsung phones before I recently got the Uley. Sammy's are easier to flash with Odin compared to Mediatek's SP tool, all good tho.
Btw I don't know what camera app you prefer using (stock or 3rd party) but for what it's worth after many tries I've settled on SnapCamera version 8.7.8. The stock cam app is ok, still checking out the new goods with A12, but SnapCamera has a ton of flexibility as far as manual camera controls. Panorama resolution sucks compared to stock panorama res but the ton of other abilities makes up for it.
Benovite said:
I've had mostly Samsung phones before I recently got the Uley. Sammy's are easier to flash with Odin compared to Mediatek's SP tool, all good tho.
Btw I don't know what camera app you prefer using (stock or 3rd party) but for what it's worth after many tries I've settled on SnapCamera version 8.7.8. The stock cam app is ok, still checking out the new goods with A12, but SnapCamera has a ton of flexibility as far as manual camera controls. Panorama resolution sucks compared to stock panorama res but the ton of other abilities makes up for it.
Click to expand...
Click to collapse
You can use TTSLex to remove the announcement from Google Phone - Call Recording
(it announces to everyone on the phone call that you're recording them when you start recording..)
FIRST -
In Settings > Security > Google Play Protect > Disable google play protect (this makes installing things google doesnt like work better. I've found it doesnt work as good if you have this enabled before beginning these steps)
Steps I used to remove the announcer
1. Open the Google Phone APK inside Google Play - uninstall/downgrade to the stock version of the app.
2. Open Google Phone - Make a phone call (someone has to actually pick up the phone) - record the phone call (it will be announced that the phone call is being recorded)
3. Download TTSLex
4. Set TTSLex as your phone's text to speech.
5. Open the App Info of Google Phone - force stop
6. I forget if this step is correct or not.. - delete storage/cache for Google Phone apk
(if this doesnt work, try again & skip step #6)
7. Update the Google Phone APK before opening it.
8. Make a phone call & record the phone call - enjoy no more announcer <3
Android Auto - Screen2Auto APK for mirroring your screen onto android auto! (movies/tv shows/youtube on car screen)
Steps -
1. Open Android Auto via Google Play store & confirm its downgraded/uninstalled to the stock APK.
2. Download AAAD
GitHub - shmykelsa/AAAD
Contribute to shmykelsa/AAAD development by creating an account on GitHub.
github.com
3. Using AAAD - install Screen2Auto
(they only give you 1 free install per month, ive tested them all on this ROM - Screen2Auto is the best to use.)
4. Update Android Auto & enjoy! <3
Pro tip for Screen2Auto - if you go to Screen2Auto > Other Settings > Alternative touch enabled > Profile 2 (Poco)
This allows you to use the touch screen of your car to control your phone while mirroring your screen.
(pause/play videos from car screen)
I also disable the Screen2Auto > Settings Launcher > S2A Launcher
But you could play with it & enable that if it suits you better than me.
(gives you a launcher page for launching apps from Screen2Auto - customize which apps are shown on the launcher etc..)
Hey all, thank you for the info on Android 12. I'm kind of out of the game with updating, ROMs, and rooting. I've been running stock 11 rooted since I've gotten this phone. I actually backed everything up and tried to update with Android 12 stock rom yesterday. I haven't messed with spflash since I've had my Armor 7. For some reason I cannot get this to work. I'll tried the Linux sp version, but gave up on that quick and grabbed my wife's win notebook. I downloaded all the drivers, latest adb, tried different cords, made sure it's in the same folder but couldn't get it to go. I know it's something very basic but I can't get past the bar on the bottom of spflash being red and then timing out after a minute or 2.
Would someone be kind enough to post an imbecilic like walkthrough for me? I got that itch to mess with it and mediatek is just a pain in the ass. Well hopefully thank you in advance.
Any idea if there is a non eu rom?
dbholte said:
Any idea if there is a non eu rom?
Click to expand...
Click to collapse
They keep their updates on drive so this might get flagged, but here's the link
Non-EU version - Google Drive
drive.google.com
If you go to ulefone's website, go to support, then software downloads, scroll to the power armor 13. The nonEU folder will be in that under the Android 12 folder.
I opus l said:
Would someone be kind enough to post an imbecilic like walkthrough for me? I got that itch to mess with it and mediatek is just a pain in the ass. Well hopefully thank you in advance.
Click to expand...
Click to collapse
After first watching a few very annoying walk-thru videos on how to flash a Ulefone I eventually went back to the video link they provided and used the SP flash version they advised, and it worked(go figure right?). Granted there's no audio and the guy briskly goes thru it, you just gotta slow that sucker down, hit pause and rewind to fully and correctly grasp what's happening. And as was mentioned above, and I think you got this part, the importance of putting the rom folder in the SP flash folder.
Also make sure you're either using the stock charging/data cable or something very close to it(ie. no cheap stuff). Here's the video Ulefone says to follow and the one that eventually got me to successfully flash Android 12: