Edl or emergency download mode .
Does anyone know how to enter Edl mode on the poco x3?
ADB/Fastboot commands.
adb reboot edl (on working system)
or
fastboot oem edl (on fastboot mode)
or
testpoint(if your mofo is totally bricked).
Is there any button combo to enter Edl.
serpent android said:
Is there any button combo to enter Edl.
Click to expand...
Click to collapse
This mode is useless without a PC, I don't think you can enter it without ADB/Fastboot .
AIIIOT said:
ADB/Fastboot commands.
adb reboot edl (on working system)
or
fastboot oem edl (on fastboot mode)
or
testpoint(if your mofo is totally bricked).
Click to expand...
Click to collapse
Will the EDL cable work?? Or sorting of wires of data cable??
trueAK said:
Will the EDL cable work?? Or sorting of wires of data cable??
Click to expand...
Click to collapse
Commands and testpoint work with any cable (they definitely work with the one that comes with the phone)
EDL uses a regular cable to push the firmware into the phone.
I've heard about making a cable specifically for start EDL(like testpoint), but I've never soldered one myself. It's easier for me to use commands to switch to this mode.
AIIIOT said:
Commands and testpoint work with any cable (they definitely work with the one that comes with the phone)
EDL uses a regular cable to push the firmware into the phone.
I've heard about making a cable specifically for start EDL(like testpoint), but I've never soldered one myself. It's easier for me to use commands to switch to this mode.
Click to expand...
Click to collapse
Great, and yeah using fastboot or adb commands to put any device to EDL mode is easier but I am preparing for the time if I made any stupid mistake and bricked it!!
So, again I want to ask,'will EDL cable work?'
I've had this problem, and I found someone who can help me by using their mi auth account. I paid 14$ for it.
Classic Nero said:
I've had this problem, and I found someone who can help me by using their mi auth account. I paid 14$ for it.
Click to expand...
Click to collapse
Do you still have the contact of that person?. My POCO X3 NFC is on black screen, pc makes a noise when connected but not able to enter fastboot mode. I try to bridge the edl points but ended up messing one of the contact points. A repair shop was able to fix my phone without taking apart the phone but now is back to the same problem. I wonder who they did it.
walaxx100 said:
Do you still have the contact of that person?. My POCO X3 NFC is on black screen, pc makes a noise when connected but not able to enter fastboot mode. I try to bridge the edl points but ended up messing one of the contact points. A repair shop was able to fix my phone without taking apart the phone but now is back to the same problem. I wonder who they did it.
Click to expand...
Click to collapse
You can contact him via telegram "@tipstop1", he helps remotely to flash the rom to fix the problem. But first you have to explain your problem and how it happened.
Related
Recently I installed orange fox. It installed correctly. Then I try to clean install latest beta of xiaomi.eu but ended with error 7. I wiped cache delvik data and internal storage. So I try to reboot in system from OF. but my phone screen got black. Nothing just black. Now I am not able to boot in fastboot nothing and on connecting to PC it will some time detect as in COM edl mode but not able to flash fastboot rom from mi flasher and some times it suddenly disconnectes automatically. Please help.
youo will have to pay to get your device unbricked. I know a guy who does that through team viewer . contact me for more details
Tanish Mishra said:
youo will have to pay to get your device unbricked. I know a guy who does that through team viewer . contact me for more details
Click to expand...
Click to collapse
I want to contact you. I need that acc
You are getting EDL mode which is good because you can actually flash stock ROM through EDL mode, most of the time it is required to touch test points physically in order to enter into EDL mode. You'll need Qualcomm QDLoader HS-USB Driver, stock ROM image and MiFlash. Let me know if you need any further help.
nitish77 said:
You are getting EDL mode which is good because you can actually flash stock ROM through EDL mode, most of the time it is required to touch test points physically in order to enter into EDL mode. You'll need Qualcomm QDLoader HS-USB Driver, stock ROM image and MiFlash. Let me know if you need any further help.
Click to expand...
Click to collapse
Nope I said when I connect it to PC some times it connects in edl then again get disconnects not recognized by computer. And another thing mi flash does not allow to flash in edl without authorized I'd and password. So i think the only way to reach nearest service center after lockdown ends. Because its not possible to open back cover alone at home. Sad.....
Ok so my phone again get back to life. Yesterday as nearest center (30km away) opens and i reach there first they flash it through edl mode. But the screen is still black but phone boots up. Then they notice that flexi cable of LED screen have a cut. They said local repair shop did that. And i have to change combo which overall coasts me about ₹3600.
Moral of the story - if u hard bricked and not able to do anything at home never give ur phone to local repair shops they may damage the things and situations get worst. Just reach to service center they flash the rom which just coast ₹150. Now not gonna flash anything for some days. horrible experience!!!.
Hi, I'm having a brick issue with my moto g100, OEM is locked so I can't flash/boot anything. My only hope of getting it back is booting into EDL and blankflashing the device... problem is, I can't find a way to do so. Does anybody here know how to enter EDL mode with this phone? I've tried several button combinations, EDL cable, but nothing works. The only thing I've left to try is shortening the mobo pins, but I don't know which ones, let alone if the board even has them.
Any help would be appreciated. Thanks!
lucasdb94 said:
Hi, I'm having a brick issue with my moto g100, OEM is locked so I can't flash/boot anything. My only hope of getting it back is booting into EDL and blankflashing the device... problem is, I can't find a way to do so. Does anybody here know how to enter EDL mode with this phone? I've tried several button combinations, EDL cable, but nothing works. The only thing I've left to try is shortening the mobo pins, but I don't know which ones, let alone if the board even has them.
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I have a super easy solution. Go to the Google app store. And download the premium bugjaeger app on a different Android device so basically you're using another Android device to run fastboot commands just remember with Android 11 make sure you give both devices debugging access
lucasdb94 said:
Hi, I'm having a brick issue with my moto g100, OEM is locked so I can't flash/boot anything. My only hope of getting it back is booting into EDL and blankflashing the device... problem is, I can't find a way to do so. Does anybody here know how to enter EDL mode with this phone? I've tried several button combinations, EDL cable, but nothing works. The only thing I've left to try is shortening the mobo pins, but I don't know which ones, let alone if the board even has them.
Any help would be appreciated. Thanks!
Click to expand...
Click to collapse
If you can access fastboot.. try "fastboot reboot emergency"
I know this is prob too late for a suggestion, however have you tried chimera tool to bypass the edl lock? You don't have to pay for that part of the tool
Shortstuff81 said:
I know this is prob too late for a suggestion, however have you tried chimera tool to bypass the edl lock? You don't have to pay for that part of the tool
Click to expand...
Click to collapse
Thanks for suggestion.. It is not too late. Have not tried that tool, so i will do a test when i have the chance to do that. Phone is still bricked.
What Name said:
Thanks for suggestion.. It is not too late. Have not tried that tool, so i will do a test when i have the chance to do that. Phone is still bricked.
Click to expand...
Click to collapse
I'm still trying to unbrick mine as well lol so I'll keep you posted and please try to keep me posted as well.... I haven't tried my own suggestion as of yet due to my PC dying on me.... I'll have a loaner so I'll be trying it then
Shortstuff81 said:
I'm still trying to unbrick mine as well lol so I'll keep you posted and please try to keep me posted as well.... I haven't tried my own suggestion as of yet due to my PC dying on me.... I'll have a loaner so I'll be trying it then
Click to expand...
Click to collapse
Did you get phone unbricked ?
If not, use method in this tread. It saved mine..
Phone wouldn't boot into the system after bootloader locking back...
I wanted to help someone whose phone wouldn't boot into the system after bootloader locking back, phone hangs on a red warning. And in the process of experimenting myself got confused and got into the same situation. Unlocking the bootloader...
forum.xda-developers.com
Hello everyone,
History : So i was using Rice driod on my OP 8T peacefully and i got an update on the rom. i installed the update via local update of the rom and after reboot the phone never booted back. i tried all button combos to make to boot anything like fastboot or recovery etc but nothing worked.
Problem : While connecting to PC the device shows as "Qualcomm HS Diagnostic 900E" I know it should show as 'qualcomm hs loader 900' something which indicates EDL state. So i can't perform MSM. There are not port showing in MSM either. Its blank. Even after forcefully trying to boot EDL ( button combos ), it always boots back to same state.
Fixes i have tried : Reinstalled qualcomm drivers many times, also tried many other versions of MSM including the Hydrogen OS one. No solution.
Can anyone please help me with this situation. Its been few days now and i have really no hope left with the device.
alp47470 said:
Hello everyone,
History : So i was using Rice driod on my OP 8T peacefully and i got an update on the rom. i installed the update via local update of the rom and after reboot the phone never booted back. i tried all button combos to make to boot anything like fastboot or recovery etc but nothing worked.
Problem : While connecting to PC the device shows as "Qualcomm HS Diagnostic 900E" I know it should show as 'qualcomm hs loader 900' something which indicates EDL state. So i can't perform MSM. There are not port showing in MSM either. Its blank. Even after forcefully trying to boot EDL ( button combos ), it always boots back to same state.
Fixes i have tried : Reinstalled qualcomm drivers many times, also tried many other versions of MSM including the Hydrogen OS one. No solution.
Can anyone please help me with this situation. Its been few days now and i have really no hope left with the device.
Click to expand...
Click to collapse
complete noob here but I have heard someone said they fixed using indian msm tool, maybe I am wrong, idk
LR7875 said:
complete noob here but I have heard someone said they fixed using indian msm tool, maybe I am wrong, idk
Click to expand...
Click to collapse
I have tried MSM already no fix as it doesn't detect the device in EDL state. Hence no port shows up
alp47470 said:
I have tried MSM already no fix as it doesn't detect the device in EDL state. Hence no port shows up
Click to expand...
Click to collapse
does the computer even detect your device? what name of the device does it show up
alp47470 said:
I have tried MSM already no fix as it doesn't detect the device in EDL state. Hence no port shows up
Click to expand...
Click to collapse
1st, make sure your device is connected and recognized as 9008 HS-USB QDLoader.
2nd, try using MSM of 9R Ported ROM for 8T, it works in almost every situation
LinhBT said:
1st, make sure your device is connected and recognized as 9008 HS-USB QDLoader.
2nd, try using MSM of 9R Ported ROM for 8T, it works in almost every situation
Click to expand...
Click to collapse
The 1st one is main problem. It doesn't recognise as 9008 HS-USB QDLoader, it always keeps showing to 900E mode.
just a long shot, as i am on a 5t not the 8, but has windoze perhaps updated and "fixed" the usb driver on your behalf?
my 5t was invisible after unlocking, until i forced windoze to update the driver to an unsigned (working) version
[EOL][11.0][OFFICIAL] LineageOS 18.1 for Oneplus 5 & 5T
Is there anybody out there!🤭
forum.xda-developers.com
alp47470 said:
The 1st one is main problem. It doesn't recognise as 9008 HS-USB QDLoader, it always keeps showing to 900E mode.
Click to expand...
Click to collapse
That's a total different device state, it's on Diag mode, not EDL mode. Try to turn off the device COMPLETELY, then either using hardkeys ( VOL + VOL - press and hold at the same time, plug in cable ) or use Deep-Fash cable to put the device into correct EDL 9008 mode.
So, guys i was finally able to fix the device by EDL point method. Somehow the device was able to boot to edl anyhow. The drivers were correct and so was the cable etc, Thank you all for still helping me.
So relieved so my 8T alive again.
alp47470 said:
So, guys i was finally able to fix the device by EDL point method. Somehow the device was able to boot to edl anyhow. The drivers were correct and so was the cable etc, Thank you all for still helping me.
So relieved so my 8T alive again.
Click to expand...
Click to collapse
Could you please be more specific as to how you got it to connect in EDL mode - it would help others who end up in the same situation.
BillGoss said:
Could you please be more specific as to how you got it to connect in EDL mode - it would help others who end up in the same situation.
Click to expand...
Click to collapse
As you know already the phone wasn't able to go to EDL mode no matter what i did. I really don't know what caused the issue and why it wasn't booting even after using button combos (both vol) or to power off manually (vol up and power) it was went to Diagnostic Mode.
Here's what i did :
-Went to local shop for removing the back panel by those heating machines
-Unplug battery
-Then used the EDL points on the motherboard to force the device to boot EDL (this method is more seen in Mi , Redmi phones)
-The device immediately recognised by just one tap on "enum" now.
Thats how i flashed the OS, plugged the battery and panel, reboot
Thanks for sharing that - much appreciated.
alp47470 said:
As you know already the phone wasn't able to go to EDL mode no matter what i did. I really don't know what caused the issue and why it wasn't booting even after using button combos (both vol) or to power off manually (vol up and power) it was went to Diagnostic Mode.
Here's what i did :
-Went to local shop for removing the back panel by those heating machines
-Unplug battery
-Then used the EDL points on the motherboard to force the device to boot EDL (this method is more seen in Mi , Redmi phones)
-The device immediately recognised by just one tap on "enum" now.
Thats how i flashed the OS, plugged the battery and panel.
Click to expand...
Click to collapse
So the localshop is using Testpoint trick. It has the same effect as using Deep-Flash cable but more trustable, only that u will have to open the back cover.
Congrats on successfully rescue the device mate
LinhBT said:
So the localshop is using Testpoint trick. It has the same effect as using Deep-Flash cable but more trustable, only that u will have to open the back cover.
Congrats on successfully rescue the device mate
Click to expand...
Click to collapse
Thanks bro. Actually the shop kepper didn't do anything. Instead he was saying that the battery was damaged or something (probably scamming me) or he actually didn't had any idea for real. I had read about EDL point thing, so i just asked the shopkeeper to just remove the back panel. Rest i came home and did everything lol. NGL it was scary as hell.
In the process i also discovered that 8T and 9R being mostly identical also have same EDL points on motherboard. Same positioning too.
alp47470 said:
Thanks bro. Actually the shop kepper didn't do anything. Instead he was saying that the battery was damaged or something (probably scamming me) or he actually didn't had any idea for real. I had read about EDL point thing, so i just asked the shopkeeper to just remove the back panel. Rest i came home and did everything lol. NGL it was scary as hell.
In the process i also discovered that 8T and 9R being mostly idenical also have same EDL points on motherboard. Same positioning too.
Click to expand...
Click to collapse
Ah I see, same here when I 1st try the Testpoint trick few years back, scary as hell cuz that was the only phone I had at that time ))))
Btw, yes, 9R and 8T shares almost everything besides of SOC's name ( Snap870 in fact is Snap865 OCing ). That's why I told u to use the MSM Tool of 9R port ROM for 8T, it passes almost every errors u may face when using MSM of 8T itself!
alp47470 said:
As you know already the phone wasn't able to go to EDL mode no matter what i did. I really don't know what caused the issue and why it wasn't booting even after using button combos (both vol) or to power off manually (vol up and power) it was went to Diagnostic Mode.
Here's what i did :
-Went to local shop for removing the back panel by those heating machines
-Unplug battery
-Then used the EDL points on the motherboard to force the device to boot EDL (this method is more seen in Mi , Redmi phones)
-The device immediately recognised by just one tap on "enum" now.
Thats how i flashed the OS, plugged the battery and panel, reboot
Click to expand...
Click to collapse
Hi, I'm the same boat after a bad flash of OSS12, hard brick, black screen, not detected in Windows devices manager, no vibration with every button combination ...
Could you share where the edl points are on the OnePlus 8T motherboard please ?
I would be eternally grateful!
NZX-DeSiGN said:
Hi, I'm the same boat after a bad flash of OSS12, hard brick, black screen, not detected in Windows devices manager, no vibration with every button combination ...
Could you share where the edl points are on the OnePlus 8T motherboard please ?
I would be eternally grateful!
Click to expand...
Click to collapse
Here.. hope it helps
I unbricked my OP8t following this guide and decided that just a working phone is not enough for me (yes i so... stubborn)
I flash rom via twrp and got errors: "can't find system_root partition" and "can't find vendor partition".
i flash new twrp via sideload and reboot phone(DON'T DO IT!)
Now my pc can't see phone, but phone can charging.
I don't think anyone can help me... but it's worth a try
Hi, follow this giude: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4180837/
gcsuri said:
Hi, follow this giude: https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4180837/
Click to expand...
Click to collapse
Hi, i can't start Qualcomm EDL mode, device does not connect to pc
so it doesn't work for me
Hi,
disconnect and turn off the phone. Start the msm tool and begin the process. Then Push VOL+and VOL- while you connect the phone to the PC. The upload process must be started. (I needed to use USB2 interface to work)
best regards,
gcsuri said:
Hi,
disconnect and turn off the phone. Start the msm tool and begin the process. Then Push VOL+and VOL- while you connect the phone to the PC. The upload process must be started. (I needed to use USB2 interface to work)
best regards,
Click to expand...
Click to collapse
computer still does not see the phone, i tried usb 2.0 and 3.0
qwerty960 said:
computer still does not see the phone, i tried usb 2.0 and 3.0
Click to expand...
Click to collapse
can you boot linux and use edl package? It works for me. Be very carefull, do not touch the persist and persist_bkp partition. It breaks your mobile forever.
i
gcsuri said:
can you boot linux and use edl package? It works for me. Be very carefull, do not touch the persist and persist_bkp partition. It breaks your mobile forever.
Click to expand...
Click to collapse
Hi, ubuntu can't see my device too
i think it's die
When your is not recognize in edl mode maybe you don't have installed the Qualcomm driver
qwerty960 said:
Hi, ubuntu can't see my device too
i think it's die
Click to expand...
Click to collapse
try the following: turn off the phone. Type a command to a shell in linux: journalctl -f
Then connect to phone to the PC while you press vol+andvol- .
What's happening?
gcsuri said:
What's happening?
Click to expand...
Click to collapse
absolutely nothing
qwerty960 said:
absolutely nothing
Click to expand...
Click to collapse
Are you using the 1+ cable?
Have your mobile charged a bit?
gcsuri said:
Are you using the 1+ cable?
Have your mobile charged a bit?
Click to expand...
Click to collapse
I use cable from OP nord 2, usb 2.0 port
I dont know, but it was charging for about ten hours on original 65wt charge
I've found that at times getting MSM to work can be difficult. But I've always been able to, somehow, get it working.
There have also been occasions when I've had to reinstall the Qualcomm driver.
I don't have any specific suggestions for your, but I just wanted to share the notes I've made/collected regarding the tool (attached). They might give you some ideas of things to try.
Note: my PC is running Windows 11 and I'm using the original OP cable.
So i recently wanted to root my OOS 12 oneplus nord, and i bricked it..
i cant get into fastbootD, Recovery, or anything at all except fastboot, the device is detected as Android bootloader interface in device manager, i have tried using: msm tool, flashing normal rom (error: partition not found and Flashing is not allowed for critical partition)
As a last resort, this worked for me : [OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Azeld said:
As a last resort, this worked for me : [OPNORD][OOS AC01AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Click to expand...
Click to collapse
As I said, msm didn’t work for me
Hafted said:
As I said, msm didn’t work for me
Click to expand...
Click to collapse
may be need to reinstall drivers? should be displayed differently in the device manager than Android bootloader interface.
gorro8 said:
may be need to reinstall drivers?
Click to expand...
Click to collapse
Nope, I can’t get it into edl mode, I did manage once but I got the you need to restart error and I couldn’t get it back there
Hafted said:
Nope, I can’t get it into edl mode, I did manage once but I got the you need to restart error and I couldn’t get it back there
Click to expand...
Click to collapse
what do you do to enter the edl mode?
what cable are you using?
gorro8 said:
what do you do to enter the edl mode?
what cable are you using?
Click to expand...
Click to collapse
Using official one plus cable, I hold bot volume keys for about 40 seconds, then connect the cable and only then I let my hands go off the keys
I found a problem similar to yours. they say it's the wrong driver
[Bricked] OP8 : FASTBOOT rom : 'Flashing is not allowed for Critical Partitions
I messed up trying to install TWRP on c.17 OOS12 Now the mobile is bricked. 1. I tried the MSM tool, it shows the COM PORT but doesnt do anything. Just stuck at waiting for device. 2. I tried the ALL IN ON TOOL, but getting "UNHANDLED...
forum.xda-developers.com
download the correct drivers and replace them in the device manager
gorro8 said:
I found a problem similar to yours. they say it's the wrong driver
[Bricked] OP8 : FASTBOOT rom : 'Flashing is not allowed for Critical Partitions
I messed up trying to install TWRP on c.17 OOS12 Now the mobile is bricked. 1. I tried the MSM tool, it shows the COM PORT but doesnt do anything. Just stuck at waiting for device. 2. I tried the ALL IN ON TOOL, but getting "UNHANDLED...
forum.xda-developers.com
Click to expand...
Click to collapse
Ok, I’ll try that and give you an update, Ty!
worth trying another USB port too, even if they are supposed to be the exact same. Same thing happened with my laptop, tried another (presumably identical) USB port and it works first time, every time
Hafted said:
Using official one plus cable, I hold bot volume keys for about 40 seconds, then connect the cable and only then I let my hands go off the keys
Click to expand...
Click to collapse
1st, u really should find the exact drivers. But also very important to remember booting your PC into Test Mode with Driver Signature Enforcement OFF - BEFORE installing the EDL 9008 Drivers for your device.
Besides, after you press and hold both Vol buttons, u should plug the device in IMMEDIATELY, not waiting for 40 seconds, since each time the device boots into EDL mode, if there's no connection is established in 5 seconds , the device will automatically out of EDL mode.
Hey, so after some time (I got a new phone by now) I managed to fix it, turns out that i had to instantly put in the cable, just like how LinhBT Said
LinhBT said:
waiting for 40 seconds, since each time the device boots into EDL mode, if there's no connection is established in 5 seconds , the device will automatically out of EDL mode.
Click to expand...
Click to collapse
Here is something that might work for unbricking and/or getting in to EDL-mode:
Unable to reinstall Oxygen OS from custom ROM. FAILED (remote: Flashing is not allowed for Critical Partitions ). Need assistance, details below.
Hello, friends. So I am here following this exact tutorial : https://www.thecustomdroid.com/oneplus-nord-oxygenos-restoration-guide/ I currently am stuck there @pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$...
forum.xda-developers.com