Related
I purchased a chinese version of the Oneplus One. The international one was too hard to get, and the only hardware difference from what I could see was the 750mhz LTE band. Before purchasing I asked if it was running ColorOS of Cyanogen. They said it was running Cyanogen. I assume they were flashing this with the CM11S rom in an attempt to capitalize on the demand for a phone that was impossible to buy. And hey, it worked because I bought one.
From what I can tell, I should have gotten a system update to 4.4.4 by now. so i checked the software version...
CyanogenMod version: 11.0-XNPH25R
Baseband version: MPSS.DI.2.0.1.c7-00020-M8974AAAAANPZM-1
Kernel version: 3.4.0cyanogenmod-g3fd6261
Build numberZ KVT49L
Is this version any different to the CM11S that should be running on international versions of the Oneplus One?
I also have the China version of One Plus One. It was already unlocked and running CM11s when i got it. Mine was version XNPH22R and i have trouble updating using OTA so i just straight away flashed the XNPH33R manually via fastboot. China version runs ColosOS while International version runs CM11s. You already have CM11s so it should be same as International but your version are outdated. The latest version is XNPH33R. Try updating via OTA first. If it fails then you can try flashing it manually.
You can grab the update at the bottom of this page.
https://cyngn.com/products/oneplusone/
Refers to timmaaa's guide here http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
Make sure you know what you're doing or you'll end up in a bootloop like me.
ned.jeffery said:
I purchased a chinese version of the Oneplus One. The international one was too hard to get, and the only hardware difference from what I could see was the 750mhz LTE band. Before purchasing I asked if it was running ColorOS of Cyanogen. They said it was running Cyanogen. I assume they were flashing this with the CM11S rom in an attempt to capitalize on the demand for a phone that was impossible to buy. And hey, it worked because I bought one.
From what I can tell, I should have gotten a system update to 4.4.4 by now. so i checked the software version...
CyanogenMod version: 11.0-XNPH25R
Baseband version: MPSS.DI.2.0.1.c7-00020-M8974AAAAANPZM-1
Kernel version: 3.4.0cyanogenmod-g3fd6261
Build numberZ KVT49L
Is this version any different to the CM11S that should be running on international versions of the Oneplus One?
Click to expand...
Click to collapse
There's only one version of CM11S and you're on it. For some reason your OTA system seems to be broken though. You can find the OTA updates and flash them manually. Refer to my index thread.
Transmitted via Bacon
Hello Experts,
I am new to Huawei and just bought a Huawei P8 which has software version GRA-L09V100R001C469B111. Googling makes me think it is an old version of software due to the last 4 digits of the build (B111), but I have not found a clear way to upgrade the telephone.
The Updater utility does not find any available upgrade. So, I would like to know if I can upgrade it to the latest version and how. Should I do it in steps, meaning loading different versions of software until I reach the last one? Or I could directly install the last one? Any way, where could I find those versions?
Thanks,
Rafael
rirw said:
Hello Experts,
I am new to Huawei and just bought a Huawei P8 which has software version GRA-L09V100R001C469B111. Googling makes me think it is an old version of software due to the last 4 digits of the build (B111), but I have not found a clear way to upgrade the telephone.
The Updater utility does not find any available upgrade. So, I would like to know if I can upgrade it to the latest version and how. Should I do it in steps, meaning loading different versions of software until I reach the last one? Or I could directly install the last one? Any way, where could I find those versions?
Thanks,
Rafael
Click to expand...
Click to collapse
http://forum.xda-developers.com/t/huawei-p8 hears a dissection for ur devies your answers are probly there i cant help directly as i have never worked with those phones.
why weekly kw40?
I wish i knew how to update my P8 to, my model GRA-L09 and build number is (weekly kw40) wonder why my build number is that and not like V100R001C900B118!
I have an LG Q6+, M700AN. It's the version we have in Russia. Not sure about other countries that have the same ROM index.
Currently the Android version is 7.1.1 with the security update of September 1st, 2017.
I know that European ROMs receive regular updates and even Android version upgrades, but not the AN version.
So I started looking for other ROM versions and found this site (lg-firmwares com) with a lot of firmwares for M700.
So I'd like to know what would be the proper ROM index for the Q6+ dual-sim with NFC support, so I won't brick my phone.
orangecoloured said:
I have an LG Q6+, M700AN. It's the version we have in Russia. Not sure about other countries that have the same ROM index.
Currently the Android version is 7.1.1 with the security update of September 1st, 2017.
I know that European ROMs receive regular updates and even Android version upgrades, but not the AN version.
So I started looking for other ROM versions and found this site (lg-firmwares com) with a lot of firmwares for M700.
So I'd like to know what would be the proper ROM index for the Q6+ dual-sim with NFC support, so I won't brick my phone.
Click to expand...
Click to collapse
No ROMs at all !! And don't dream about them.
Enviat des del meu LG-M700 usant Tapatalk
sorry, i have no clue about lg firmware. but i got a february security update on my M700DSK
francescrm said:
No ROMs at all !! And don't dream about them.
Click to expand...
Click to collapse
What do you mean no roms? I provided you with a link to the roms repo.
maXDAmn said:
sorry, i have no clue about lg firmware. but i got a february security update on my M700DSK
Click to expand...
Click to collapse
Cool! And just to be clear, do you have a 64GB dual-sim with NFC?
Sorry, i thought you were meaning custom ROMs.
Ok, so I found out that the M700AN hardware is pretty similar to M700DSN.
I flashed the most recent firmware dated February 2018 and it's working fine.
Does anybody here own M700DSN and could check this link?
Code:
csmg.lgmobile.com 9002/csmg/b2c/client/auth_model_check2.jsp?esn=
There should be ":" between "com" and "9002"
You'll need to type in your IMEI after the equals sign.
Using my IMEI for the M700AN model that is being sold on the CIS market, I get nothing. It's just rubbish.
Maybe M700DSN could give a more verbose result. There should be a link to the latest firmware,
In case it's there, then there's a chance of keeping M700AN up to date using M700DSN updates.
orangecoloured said:
Ok, so I found out that the M700AN hardware is pretty similar to M700DSN.
I flashed the most recent firmware dated February 2018 and it's working fine.
Does anybody here own M700DSN and could check this link?
There should be ":" between "com" and "9002"
You'll need to type in your IMEI after the equals sign.
Using my IMEI for the M700AN model that is being sold on the CIS market, I get nothing. It's just rubbish.
Maybe M700DSN could give a more verbose result. There should be a link to the latest firmware,
In case it's there, then there's a chance of keeping M700AN up to date using M700DSN updates.
Click to expand...
Click to collapse
The Firmwares are located on the LG Website and IMEI is not required to Download the firmware files as far i know.
I have M700DSK and the latest FW is 16FEB2018 on 1 Jan 2018 Patch so i dont think that more recent software is available
Can the FW be flashed on Diffrent Varient Without Unlocking the Bootloader (Using LG Suite) ..?
gyarados025 said:
The Firmwares are located on the LG Website and IMEI is not required to Download the firmware files as far i know.
I have M700DSK and the latest FW is 16FEB2018 on 1 Jan 2018 Patch so i dont think that more recent software is available
Can the FW be flashed on Diffrent Varient Without Unlocking the Bootloader (Using LG Suite) ..?
Click to expand...
Click to collapse
Could you provide me with a link to the firmwares repository?
Yeah, you can flash a different region rom without any fuss using Uppercut and LGUP.
Hi, I've noticed here in the UK, update support has been a lot more sparse compared to India and was wondering if my RMX2075 could install an RMX2076PU ROM, they recently uploaded on the UK website with A.22 which was RMX2076EU.
If I downloaded a .ozip from the Indian website, what would happen? Would I lose my data? Is it possible to interchange and switch between PU, EU and RMX2075 ROMs freely as to whichever gets the update first.
Thanks a lot
- Josh
That's the one i installed on my phone. I had the Rmx2075 A.18 when i opened the box and upgraded using the RMX2076EU A.22 on the uk website...
https://www.realme.com/eu/support/software-update
It went ok and still shows rmx2075 A.22
View attachment 5067477
wastedagen said:
That's the one i installed on my phone. I had the Rmx2075 A.18 when i opened the box and upgraded using the RMX2076EU A.22 on the uk website...
https://www.realme.com/eu/support/software-update
It went ok and still shows rmx2075 A.22
View attachment 5067071
Click to expand...
Click to collapse
I'm looking at installing a PU ROM on the phone. I used the EU one as an example. But thanks for the reply.
bictu said:
I'm looking at installing a PU ROM on the phone. I used the EU one as an example. But thanks for the reply.
Click to expand...
Click to collapse
I tried to install the RMX2076PU A.25 from the indian website but it keeps coming up corrupt file....
Even when i try to extract it on pc, winrar says corrupt file...
I wanted to try this rom as it has a newer security patch.....
wastedagen said:
I tried to install the RMX2076PU A.25 from the indian website but it keeps coming up corrupt file....
Even when i try to extract it on pc, winrar says corrupt file...
I wanted to try this rom as it has a newer security patch.....
Click to expand...
Click to collapse
I just don't want to try it and then my phone doesn't work as I have all my work stuff on it.
Just downloaded and installed RMX2076EU A.28 firmware from website... Hope this fixes my issues..
Phone still shows RMX2075 though.. I wonder if its because I have a single SIM... [emoji848].
wastedagen said:
Just downloaded and installed RMX2076EU A.28 firmware from website... Hope this fixes my issues..
Phone still shows RMX2075 though.. I wonder if its because I have a single SIM... [emoji848].
Click to expand...
Click to collapse
I'm also single SIM. Seems safe to say that just using EU ROMs from the EU Software page seems like it should work.
Thanks a lot, I'm gonna install it now and just use the EU page.
- Josh
Strange, phone has just OTA installed a new firmware... Version A.30
This isn't on the European or Indian website...
wastedagen said:
Strange, phone has just OTA installed a new firmware... Version A.30
This isn't on the European or Indian website...
Click to expand...
Click to collapse
I also got that update, it's still not on any of them nor the UK, that one is still A.22 lol.
I installed it as soon as it came through and the change log was very similar (if not identical) to A.28
bictu said:
I also got that update, it's still not on any of them nor the UK, that one is still A.22 lol.
I installed it as soon as it came through and the change log was very similar (if not identical) to A.28
Click to expand...
Click to collapse
Yeah I noticed that too....
wastedagen said:
Yeah I noticed that too....
Click to expand...
Click to collapse
Just got the release for A.32 on RMX2075
Hi Guys,
I know it's been a while on this thread. But wondering, with Android 11 beta released for Indian variants of the phone. Is it possible to flash an Indian ROM over here on the RMX2075 / EU phones?
Thanks - Josh
i was wondering if i can install a EU on a PU version. Ive a EU device with a PU rom installed i want to have EU back.
Can I just go in recovery and flash a EU version?
my PU IS 11.A.41
EU is at 11.a.42
From my experience, flashing PU ok is not good : FP scanner doesn't work anymore after doing that, even after i flash back EU version. And when trying Android11 PU update, it's worse: there's all camera that doesn't work (crash at launch). If somebody knows how to restore the FP scanner, let me know..
I bought a OP9 chinese model LE2110, my software is oxygen OS 11.2.3.3 LE25DA (indian)
I want global version because this one has some bloatware and indian company cloud notifications that i dont want.
Is it possible to change it to international version? i downloaded the global one but i cant install it (local) because its a downgrade or equal to my current one. i updated to the latest version when setting up my phone.
The chinese version/model doesnt have wireless charging, so if there is a problem with compatability, can I change back to the indian variant?
note: I dont care about my data i can format everything, my old phone can transfer things for me later
sorry i am kinda new to this
I got my answer, but i dont know how to delete the post.
have a good day
McFozan said:
I got my answer, but i dont know how to delete the post.
have a good day
Click to expand...
Click to collapse
Why would you delete the post instead of posting your answer? You know, in case someone has the exact same issue.
NotTheGiant said:
Why would you delete the post instead of posting your answer? You know, in case someone has the exact same issue.
Click to expand...
Click to collapse
My bad.
Well the answer I got is that I can wait for the next update, and manually download the european/international version(build) from Oneplus website. It will install and replace the indian version, and supposedly I will be able to remove all the bloatware that I can't install. I can't install the current international build because it is the same number as my current one and its considered downgrading, which is not allowed.
So I will wait for the next update and download it manually. Hopefully this works.
Link to my other thread:
Can I change my Indian Software OOS to the International/European OOS?
I posted this on OP9 forum but OP9 Pro forum looks more active, sorry in advance. I bought a OP9 chinese model LE2110, my software is oxygen OS 11.2.3.3 LE25DA (indian) I want global version because this one has some bloatware and indian...
forum.xda-developers.com
Pro tip: disable auto downloading the software update over wifi, just so that you don't accidentally download it.
It worked, I am now running EU software and the bloatware is gone.